diff options
author | James Bottomley <jejb@titanic.(none)> | 2005-08-28 12:18:35 -0400 |
---|---|---|
committer | James Bottomley <jejb@titanic.(none)> | 2005-08-28 12:18:35 -0400 |
commit | 7a93aef7fbac6f4db40b6fec5c0c6b654ae7a93c (patch) | |
tree | 4cd7aae38012dfc1ff6c62be20ef8840e56d8383 /drivers/scsi/aic7xxx/aiclib.h | |
parent | 392160335c798bbe94ab3aae6ea0c85d32b81bbc (diff) | |
parent | 8224bfa84d510630b40ea460b2bb380c91acb8ae (diff) |
Merge HEAD from ../scsi-misc-2.6-tmp
Diffstat (limited to 'drivers/scsi/aic7xxx/aiclib.h')
-rw-r--r-- | drivers/scsi/aic7xxx/aiclib.h | 868 |
1 files changed, 0 insertions, 868 deletions
diff --git a/drivers/scsi/aic7xxx/aiclib.h b/drivers/scsi/aic7xxx/aiclib.h index bfe6f954d3c4..e7d94cbaf2a8 100644 --- a/drivers/scsi/aic7xxx/aiclib.h +++ b/drivers/scsi/aic7xxx/aiclib.h | |||
@@ -57,121 +57,6 @@ | |||
57 | #ifndef _AICLIB_H | 57 | #ifndef _AICLIB_H |
58 | #define _AICLIB_H | 58 | #define _AICLIB_H |
59 | 59 | ||
60 | /* | ||
61 | * Linux Interrupt Support. | ||
62 | */ | ||
63 | #ifndef IRQ_RETVAL | ||
64 | typedef void irqreturn_t; | ||
65 | #define IRQ_RETVAL(x) | ||
66 | #endif | ||
67 | |||
68 | /* | ||
69 | * SCSI command format | ||
70 | */ | ||
71 | |||
72 | /* | ||
73 | * Define dome bits that are in ALL (or a lot of) scsi commands | ||
74 | */ | ||
75 | #define SCSI_CTL_LINK 0x01 | ||
76 | #define SCSI_CTL_FLAG 0x02 | ||
77 | #define SCSI_CTL_VENDOR 0xC0 | ||
78 | #define SCSI_CMD_LUN 0xA0 /* these two should not be needed */ | ||
79 | #define SCSI_CMD_LUN_SHIFT 5 /* LUN in the cmd is no longer SCSI */ | ||
80 | |||
81 | #define SCSI_MAX_CDBLEN 16 /* | ||
82 | * 16 byte commands are in the | ||
83 | * SCSI-3 spec | ||
84 | */ | ||
85 | /* 6byte CDBs special case 0 length to be 256 */ | ||
86 | #define SCSI_CDB6_LEN(len) ((len) == 0 ? 256 : len) | ||
87 | |||
88 | /* | ||
89 | * This type defines actions to be taken when a particular sense code is | ||
90 | * received. Right now, these flags are only defined to take up 16 bits, | ||
91 | * but can be expanded in the future if necessary. | ||
92 | */ | ||
93 | typedef enum { | ||
94 | SS_NOP = 0x000000, /* Do nothing */ | ||
95 | SS_RETRY = 0x010000, /* Retry the command */ | ||
96 | SS_FAIL = 0x020000, /* Bail out */ | ||
97 | SS_START = 0x030000, /* Send a Start Unit command to the device, | ||
98 | * then retry the original command. | ||
99 | */ | ||
100 | SS_TUR = 0x040000, /* Send a Test Unit Ready command to the | ||
101 | * device, then retry the original command. | ||
102 | */ | ||
103 | SS_REQSENSE = 0x050000, /* Send a RequestSense command to the | ||
104 | * device, then retry the original command. | ||
105 | */ | ||
106 | SS_INQ_REFRESH = 0x060000, | ||
107 | SS_MASK = 0xff0000 | ||
108 | } aic_sense_action; | ||
109 | |||
110 | typedef enum { | ||
111 | SSQ_NONE = 0x0000, | ||
112 | SSQ_DECREMENT_COUNT = 0x0100, /* Decrement the retry count */ | ||
113 | SSQ_MANY = 0x0200, /* send lots of recovery commands */ | ||
114 | SSQ_RANGE = 0x0400, /* | ||
115 | * This table entry represents the | ||
116 | * end of a range of ASCQs that | ||
117 | * have identical error actions | ||
118 | * and text. | ||
119 | */ | ||
120 | SSQ_PRINT_SENSE = 0x0800, | ||
121 | SSQ_DELAY = 0x1000, /* Delay before retry. */ | ||
122 | SSQ_DELAY_RANDOM = 0x2000, /* Randomized delay before retry. */ | ||
123 | SSQ_FALLBACK = 0x4000, /* Do a speed fallback to recover */ | ||
124 | SSQ_MASK = 0xff00 | ||
125 | } aic_sense_action_qualifier; | ||
126 | |||
127 | /* Mask for error status values */ | ||
128 | #define SS_ERRMASK 0xff | ||
129 | |||
130 | /* The default, retyable, error action */ | ||
131 | #define SS_RDEF SS_RETRY|SSQ_DECREMENT_COUNT|SSQ_PRINT_SENSE|EIO | ||
132 | |||
133 | /* The retyable, error action, with table specified error code */ | ||
134 | #define SS_RET SS_RETRY|SSQ_DECREMENT_COUNT|SSQ_PRINT_SENSE | ||
135 | |||
136 | /* Fatal error action, with table specified error code */ | ||
137 | #define SS_FATAL SS_FAIL|SSQ_PRINT_SENSE | ||
138 | |||
139 | struct scsi_generic | ||
140 | { | ||
141 | uint8_t opcode; | ||
142 | uint8_t bytes[11]; | ||
143 | }; | ||
144 | |||
145 | struct scsi_request_sense | ||
146 | { | ||
147 | uint8_t opcode; | ||
148 | uint8_t byte2; | ||
149 | uint8_t unused[2]; | ||
150 | uint8_t length; | ||
151 | uint8_t control; | ||
152 | }; | ||
153 | |||
154 | struct scsi_test_unit_ready | ||
155 | { | ||
156 | uint8_t opcode; | ||
157 | uint8_t byte2; | ||
158 | uint8_t unused[3]; | ||
159 | uint8_t control; | ||
160 | }; | ||
161 | |||
162 | struct scsi_send_diag | ||
163 | { | ||
164 | uint8_t opcode; | ||
165 | uint8_t byte2; | ||
166 | #define SSD_UOL 0x01 | ||
167 | #define SSD_DOL 0x02 | ||
168 | #define SSD_SELFTEST 0x04 | ||
169 | #define SSD_PF 0x10 | ||
170 | uint8_t unused[1]; | ||
171 | uint8_t paramlen[2]; | ||
172 | uint8_t control; | ||
173 | }; | ||
174 | |||
175 | struct scsi_sense | 60 | struct scsi_sense |
176 | { | 61 | { |
177 | uint8_t opcode; | 62 | uint8_t opcode; |
@@ -181,537 +66,12 @@ struct scsi_sense | |||
181 | uint8_t control; | 66 | uint8_t control; |
182 | }; | 67 | }; |
183 | 68 | ||
184 | struct scsi_inquiry | ||
185 | { | ||
186 | uint8_t opcode; | ||
187 | uint8_t byte2; | ||
188 | #define SI_EVPD 0x01 | ||
189 | uint8_t page_code; | ||
190 | uint8_t reserved; | ||
191 | uint8_t length; | ||
192 | uint8_t control; | ||
193 | }; | ||
194 | |||
195 | struct scsi_mode_sense_6 | ||
196 | { | ||
197 | uint8_t opcode; | ||
198 | uint8_t byte2; | ||
199 | #define SMS_DBD 0x08 | ||
200 | uint8_t page; | ||
201 | #define SMS_PAGE_CODE 0x3F | ||
202 | #define SMS_VENDOR_SPECIFIC_PAGE 0x00 | ||
203 | #define SMS_DISCONNECT_RECONNECT_PAGE 0x02 | ||
204 | #define SMS_PERIPHERAL_DEVICE_PAGE 0x09 | ||
205 | #define SMS_CONTROL_MODE_PAGE 0x0A | ||
206 | #define SMS_ALL_PAGES_PAGE 0x3F | ||
207 | #define SMS_PAGE_CTRL_MASK 0xC0 | ||
208 | #define SMS_PAGE_CTRL_CURRENT 0x00 | ||
209 | #define SMS_PAGE_CTRL_CHANGEABLE 0x40 | ||
210 | #define SMS_PAGE_CTRL_DEFAULT 0x80 | ||
211 | #define SMS_PAGE_CTRL_SAVED 0xC0 | ||
212 | uint8_t unused; | ||
213 | uint8_t length; | ||
214 | uint8_t control; | ||
215 | }; | ||
216 | |||
217 | struct scsi_mode_sense_10 | ||
218 | { | ||
219 | uint8_t opcode; | ||
220 | uint8_t byte2; /* same bits as small version */ | ||
221 | uint8_t page; /* same bits as small version */ | ||
222 | uint8_t unused[4]; | ||
223 | uint8_t length[2]; | ||
224 | uint8_t control; | ||
225 | }; | ||
226 | |||
227 | struct scsi_mode_select_6 | ||
228 | { | ||
229 | uint8_t opcode; | ||
230 | uint8_t byte2; | ||
231 | #define SMS_SP 0x01 | ||
232 | #define SMS_PF 0x10 | ||
233 | uint8_t unused[2]; | ||
234 | uint8_t length; | ||
235 | uint8_t control; | ||
236 | }; | ||
237 | |||
238 | struct scsi_mode_select_10 | ||
239 | { | ||
240 | uint8_t opcode; | ||
241 | uint8_t byte2; /* same bits as small version */ | ||
242 | uint8_t unused[5]; | ||
243 | uint8_t length[2]; | ||
244 | uint8_t control; | ||
245 | }; | ||
246 | |||
247 | /* | ||
248 | * When sending a mode select to a tape drive, the medium type must be 0. | ||
249 | */ | ||
250 | struct scsi_mode_hdr_6 | ||
251 | { | ||
252 | uint8_t datalen; | ||
253 | uint8_t medium_type; | ||
254 | uint8_t dev_specific; | ||
255 | uint8_t block_descr_len; | ||
256 | }; | ||
257 | |||
258 | struct scsi_mode_hdr_10 | ||
259 | { | ||
260 | uint8_t datalen[2]; | ||
261 | uint8_t medium_type; | ||
262 | uint8_t dev_specific; | ||
263 | uint8_t reserved[2]; | ||
264 | uint8_t block_descr_len[2]; | ||
265 | }; | ||
266 | |||
267 | struct scsi_mode_block_descr | ||
268 | { | ||
269 | uint8_t density_code; | ||
270 | uint8_t num_blocks[3]; | ||
271 | uint8_t reserved; | ||
272 | uint8_t block_len[3]; | ||
273 | }; | ||
274 | |||
275 | struct scsi_log_sense | ||
276 | { | ||
277 | uint8_t opcode; | ||
278 | uint8_t byte2; | ||
279 | #define SLS_SP 0x01 | ||
280 | #define SLS_PPC 0x02 | ||
281 | uint8_t page; | ||
282 | #define SLS_PAGE_CODE 0x3F | ||
283 | #define SLS_ALL_PAGES_PAGE 0x00 | ||
284 | #define SLS_OVERRUN_PAGE 0x01 | ||
285 | #define SLS_ERROR_WRITE_PAGE 0x02 | ||
286 | #define SLS_ERROR_READ_PAGE 0x03 | ||
287 | #define SLS_ERROR_READREVERSE_PAGE 0x04 | ||
288 | #define SLS_ERROR_VERIFY_PAGE 0x05 | ||
289 | #define SLS_ERROR_NONMEDIUM_PAGE 0x06 | ||
290 | #define SLS_ERROR_LASTN_PAGE 0x07 | ||
291 | #define SLS_PAGE_CTRL_MASK 0xC0 | ||
292 | #define SLS_PAGE_CTRL_THRESHOLD 0x00 | ||
293 | #define SLS_PAGE_CTRL_CUMULATIVE 0x40 | ||
294 | #define SLS_PAGE_CTRL_THRESH_DEFAULT 0x80 | ||
295 | #define SLS_PAGE_CTRL_CUMUL_DEFAULT 0xC0 | ||
296 | uint8_t reserved[2]; | ||
297 | uint8_t paramptr[2]; | ||
298 | uint8_t length[2]; | ||
299 | uint8_t control; | ||
300 | }; | ||
301 | |||
302 | struct scsi_log_select | ||
303 | { | ||
304 | uint8_t opcode; | ||
305 | uint8_t byte2; | ||
306 | /* SLS_SP 0x01 */ | ||
307 | #define SLS_PCR 0x02 | ||
308 | uint8_t page; | ||
309 | /* SLS_PAGE_CTRL_MASK 0xC0 */ | ||
310 | /* SLS_PAGE_CTRL_THRESHOLD 0x00 */ | ||
311 | /* SLS_PAGE_CTRL_CUMULATIVE 0x40 */ | ||
312 | /* SLS_PAGE_CTRL_THRESH_DEFAULT 0x80 */ | ||
313 | /* SLS_PAGE_CTRL_CUMUL_DEFAULT 0xC0 */ | ||
314 | uint8_t reserved[4]; | ||
315 | uint8_t length[2]; | ||
316 | uint8_t control; | ||
317 | }; | ||
318 | |||
319 | struct scsi_log_header | ||
320 | { | ||
321 | uint8_t page; | ||
322 | uint8_t reserved; | ||
323 | uint8_t datalen[2]; | ||
324 | }; | ||
325 | |||
326 | struct scsi_log_param_header { | ||
327 | uint8_t param_code[2]; | ||
328 | uint8_t param_control; | ||
329 | #define SLP_LP 0x01 | ||
330 | #define SLP_LBIN 0x02 | ||
331 | #define SLP_TMC_MASK 0x0C | ||
332 | #define SLP_TMC_ALWAYS 0x00 | ||
333 | #define SLP_TMC_EQUAL 0x04 | ||
334 | #define SLP_TMC_NOTEQUAL 0x08 | ||
335 | #define SLP_TMC_GREATER 0x0C | ||
336 | #define SLP_ETC 0x10 | ||
337 | #define SLP_TSD 0x20 | ||
338 | #define SLP_DS 0x40 | ||
339 | #define SLP_DU 0x80 | ||
340 | uint8_t param_len; | ||
341 | }; | ||
342 | |||
343 | struct scsi_control_page { | ||
344 | uint8_t page_code; | ||
345 | uint8_t page_length; | ||
346 | uint8_t rlec; | ||
347 | #define SCB_RLEC 0x01 /*Report Log Exception Cond*/ | ||
348 | uint8_t queue_flags; | ||
349 | #define SCP_QUEUE_ALG_MASK 0xF0 | ||
350 | #define SCP_QUEUE_ALG_RESTRICTED 0x00 | ||
351 | #define SCP_QUEUE_ALG_UNRESTRICTED 0x10 | ||
352 | #define SCP_QUEUE_ERR 0x02 /*Queued I/O aborted for CACs*/ | ||
353 | #define SCP_QUEUE_DQUE 0x01 /*Queued I/O disabled*/ | ||
354 | uint8_t eca_and_aen; | ||
355 | #define SCP_EECA 0x80 /*Enable Extended CA*/ | ||
356 | #define SCP_RAENP 0x04 /*Ready AEN Permission*/ | ||
357 | #define SCP_UAAENP 0x02 /*UA AEN Permission*/ | ||
358 | #define SCP_EAENP 0x01 /*Error AEN Permission*/ | ||
359 | uint8_t reserved; | ||
360 | uint8_t aen_holdoff_period[2]; | ||
361 | }; | ||
362 | |||
363 | struct scsi_reserve | ||
364 | { | ||
365 | uint8_t opcode; | ||
366 | uint8_t byte2; | ||
367 | uint8_t unused[2]; | ||
368 | uint8_t length; | ||
369 | uint8_t control; | ||
370 | }; | ||
371 | |||
372 | struct scsi_release | ||
373 | { | ||
374 | uint8_t opcode; | ||
375 | uint8_t byte2; | ||
376 | uint8_t unused[2]; | ||
377 | uint8_t length; | ||
378 | uint8_t control; | ||
379 | }; | ||
380 | |||
381 | struct scsi_prevent | ||
382 | { | ||
383 | uint8_t opcode; | ||
384 | uint8_t byte2; | ||
385 | uint8_t unused[2]; | ||
386 | uint8_t how; | ||
387 | uint8_t control; | ||
388 | }; | ||
389 | #define PR_PREVENT 0x01 | ||
390 | #define PR_ALLOW 0x00 | ||
391 | |||
392 | struct scsi_sync_cache | ||
393 | { | ||
394 | uint8_t opcode; | ||
395 | uint8_t byte2; | ||
396 | uint8_t begin_lba[4]; | ||
397 | uint8_t reserved; | ||
398 | uint8_t lb_count[2]; | ||
399 | uint8_t control; | ||
400 | }; | ||
401 | |||
402 | |||
403 | struct scsi_changedef | ||
404 | { | ||
405 | uint8_t opcode; | ||
406 | uint8_t byte2; | ||
407 | uint8_t unused1; | ||
408 | uint8_t how; | ||
409 | uint8_t unused[4]; | ||
410 | uint8_t datalen; | ||
411 | uint8_t control; | ||
412 | }; | ||
413 | |||
414 | struct scsi_read_buffer | ||
415 | { | ||
416 | uint8_t opcode; | ||
417 | uint8_t byte2; | ||
418 | #define RWB_MODE 0x07 | ||
419 | #define RWB_MODE_HDR_DATA 0x00 | ||
420 | #define RWB_MODE_DATA 0x02 | ||
421 | #define RWB_MODE_DOWNLOAD 0x04 | ||
422 | #define RWB_MODE_DOWNLOAD_SAVE 0x05 | ||
423 | uint8_t buffer_id; | ||
424 | uint8_t offset[3]; | ||
425 | uint8_t length[3]; | ||
426 | uint8_t control; | ||
427 | }; | ||
428 | |||
429 | struct scsi_write_buffer | ||
430 | { | ||
431 | uint8_t opcode; | ||
432 | uint8_t byte2; | ||
433 | uint8_t buffer_id; | ||
434 | uint8_t offset[3]; | ||
435 | uint8_t length[3]; | ||
436 | uint8_t control; | ||
437 | }; | ||
438 | |||
439 | struct scsi_rw_6 | ||
440 | { | ||
441 | uint8_t opcode; | ||
442 | uint8_t addr[3]; | ||
443 | /* only 5 bits are valid in the MSB address byte */ | ||
444 | #define SRW_TOPADDR 0x1F | ||
445 | uint8_t length; | ||
446 | uint8_t control; | ||
447 | }; | ||
448 | |||
449 | struct scsi_rw_10 | ||
450 | { | ||
451 | uint8_t opcode; | ||
452 | #define SRW10_RELADDR 0x01 | ||
453 | #define SRW10_FUA 0x08 | ||
454 | #define SRW10_DPO 0x10 | ||
455 | uint8_t byte2; | ||
456 | uint8_t addr[4]; | ||
457 | uint8_t reserved; | ||
458 | uint8_t length[2]; | ||
459 | uint8_t control; | ||
460 | }; | ||
461 | |||
462 | struct scsi_rw_12 | ||
463 | { | ||
464 | uint8_t opcode; | ||
465 | #define SRW12_RELADDR 0x01 | ||
466 | #define SRW12_FUA 0x08 | ||
467 | #define SRW12_DPO 0x10 | ||
468 | uint8_t byte2; | ||
469 | uint8_t addr[4]; | ||
470 | uint8_t length[4]; | ||
471 | uint8_t reserved; | ||
472 | uint8_t control; | ||
473 | }; | ||
474 | |||
475 | struct scsi_start_stop_unit | ||
476 | { | ||
477 | uint8_t opcode; | ||
478 | uint8_t byte2; | ||
479 | #define SSS_IMMED 0x01 | ||
480 | uint8_t reserved[2]; | ||
481 | uint8_t how; | ||
482 | #define SSS_START 0x01 | ||
483 | #define SSS_LOEJ 0x02 | ||
484 | uint8_t control; | ||
485 | }; | ||
486 | |||
487 | #define SC_SCSI_1 0x01 | ||
488 | #define SC_SCSI_2 0x03 | ||
489 | |||
490 | /* | ||
491 | * Opcodes | ||
492 | */ | ||
493 | |||
494 | #define TEST_UNIT_READY 0x00 | ||
495 | #define REQUEST_SENSE 0x03 | ||
496 | #define READ_6 0x08 | ||
497 | #define WRITE_6 0x0a | ||
498 | #define INQUIRY 0x12 | ||
499 | #define MODE_SELECT_6 0x15 | ||
500 | #define MODE_SENSE_6 0x1a | ||
501 | #define START_STOP_UNIT 0x1b | ||
502 | #define START_STOP 0x1b | ||
503 | #define RESERVE 0x16 | ||
504 | #define RELEASE 0x17 | ||
505 | #define RECEIVE_DIAGNOSTIC 0x1c | ||
506 | #define SEND_DIAGNOSTIC 0x1d | ||
507 | #define PREVENT_ALLOW 0x1e | ||
508 | #define READ_CAPACITY 0x25 | ||
509 | #define READ_10 0x28 | ||
510 | #define WRITE_10 0x2a | ||
511 | #define POSITION_TO_ELEMENT 0x2b | ||
512 | #define SYNCHRONIZE_CACHE 0x35 | ||
513 | #define WRITE_BUFFER 0x3b | ||
514 | #define READ_BUFFER 0x3c | ||
515 | #define CHANGE_DEFINITION 0x40 | ||
516 | #define LOG_SELECT 0x4c | ||
517 | #define LOG_SENSE 0x4d | ||
518 | #ifdef XXXCAM | ||
519 | #define MODE_SENSE_10 0x5A | ||
520 | #endif | ||
521 | #define MODE_SELECT_10 0x55 | ||
522 | #define MOVE_MEDIUM 0xa5 | ||
523 | #define READ_12 0xa8 | ||
524 | #define WRITE_12 0xaa | ||
525 | #define READ_ELEMENT_STATUS 0xb8 | ||
526 | |||
527 | |||
528 | /* | ||
529 | * Device Types | ||
530 | */ | ||
531 | #define T_DIRECT 0x00 | ||
532 | #define T_SEQUENTIAL 0x01 | ||
533 | #define T_PRINTER 0x02 | ||
534 | #define T_PROCESSOR 0x03 | ||
535 | #define T_WORM 0x04 | ||
536 | #define T_CDROM 0x05 | ||
537 | #define T_SCANNER 0x06 | ||
538 | #define T_OPTICAL 0x07 | ||
539 | #define T_CHANGER 0x08 | ||
540 | #define T_COMM 0x09 | ||
541 | #define T_ASC0 0x0a | ||
542 | #define T_ASC1 0x0b | ||
543 | #define T_STORARRAY 0x0c | ||
544 | #define T_ENCLOSURE 0x0d | ||
545 | #define T_RBC 0x0e | ||
546 | #define T_OCRW 0x0f | ||
547 | #define T_NODEVICE 0x1F | ||
548 | #define T_ANY 0xFF /* Used in Quirk table matches */ | ||
549 | |||
550 | #define T_REMOV 1 | ||
551 | #define T_FIXED 0 | ||
552 | |||
553 | /* | ||
554 | * This length is the initial inquiry length used by the probe code, as | ||
555 | * well as the legnth necessary for aic_print_inquiry() to function | ||
556 | * correctly. If either use requires a different length in the future, | ||
557 | * the two values should be de-coupled. | ||
558 | */ | ||
559 | #define SHORT_INQUIRY_LENGTH 36 | ||
560 | |||
561 | struct scsi_inquiry_data | ||
562 | { | ||
563 | uint8_t device; | ||
564 | #define SID_TYPE(inq_data) ((inq_data)->device & 0x1f) | ||
565 | #define SID_QUAL(inq_data) (((inq_data)->device & 0xE0) >> 5) | ||
566 | #define SID_QUAL_LU_CONNECTED 0x00 /* | ||
567 | * The specified peripheral device | ||
568 | * type is currently connected to | ||
569 | * logical unit. If the target cannot | ||
570 | * determine whether or not a physical | ||
571 | * device is currently connected, it | ||
572 | * shall also use this peripheral | ||
573 | * qualifier when returning the INQUIRY | ||
574 | * data. This peripheral qualifier | ||
575 | * does not mean that the device is | ||
576 | * ready for access by the initiator. | ||
577 | */ | ||
578 | #define SID_QUAL_LU_OFFLINE 0x01 /* | ||
579 | * The target is capable of supporting | ||
580 | * the specified peripheral device type | ||
581 | * on this logical unit; however, the | ||
582 | * physical device is not currently | ||
583 | * connected to this logical unit. | ||
584 | */ | ||
585 | #define SID_QUAL_RSVD 0x02 | ||
586 | #define SID_QUAL_BAD_LU 0x03 /* | ||
587 | * The target is not capable of | ||
588 | * supporting a physical device on | ||
589 | * this logical unit. For this | ||
590 | * peripheral qualifier the peripheral | ||
591 | * device type shall be set to 1Fh to | ||
592 | * provide compatibility with previous | ||
593 | * versions of SCSI. All other | ||
594 | * peripheral device type values are | ||
595 | * reserved for this peripheral | ||
596 | * qualifier. | ||
597 | */ | ||
598 | #define SID_QUAL_IS_VENDOR_UNIQUE(inq_data) ((SID_QUAL(inq_data) & 0x08) != 0) | ||
599 | uint8_t dev_qual2; | ||
600 | #define SID_QUAL2 0x7F | ||
601 | #define SID_IS_REMOVABLE(inq_data) (((inq_data)->dev_qual2 & 0x80) != 0) | ||
602 | uint8_t version; | ||
603 | #define SID_ANSI_REV(inq_data) ((inq_data)->version & 0x07) | ||
604 | #define SCSI_REV_0 0 | 69 | #define SCSI_REV_0 0 |
605 | #define SCSI_REV_CCS 1 | 70 | #define SCSI_REV_CCS 1 |
606 | #define SCSI_REV_2 2 | 71 | #define SCSI_REV_2 2 |
607 | #define SCSI_REV_SPC 3 | 72 | #define SCSI_REV_SPC 3 |
608 | #define SCSI_REV_SPC2 4 | 73 | #define SCSI_REV_SPC2 4 |
609 | 74 | ||
610 | #define SID_ECMA 0x38 | ||
611 | #define SID_ISO 0xC0 | ||
612 | uint8_t response_format; | ||
613 | #define SID_AENC 0x80 | ||
614 | #define SID_TrmIOP 0x40 | ||
615 | uint8_t additional_length; | ||
616 | uint8_t reserved[2]; | ||
617 | uint8_t flags; | ||
618 | #define SID_SftRe 0x01 | ||
619 | #define SID_CmdQue 0x02 | ||
620 | #define SID_Linked 0x08 | ||
621 | #define SID_Sync 0x10 | ||
622 | #define SID_WBus16 0x20 | ||
623 | #define SID_WBus32 0x40 | ||
624 | #define SID_RelAdr 0x80 | ||
625 | #define SID_VENDOR_SIZE 8 | ||
626 | char vendor[SID_VENDOR_SIZE]; | ||
627 | #define SID_PRODUCT_SIZE 16 | ||
628 | char product[SID_PRODUCT_SIZE]; | ||
629 | #define SID_REVISION_SIZE 4 | ||
630 | char revision[SID_REVISION_SIZE]; | ||
631 | /* | ||
632 | * The following fields were taken from SCSI Primary Commands - 2 | ||
633 | * (SPC-2) Revision 14, Dated 11 November 1999 | ||
634 | */ | ||
635 | #define SID_VENDOR_SPECIFIC_0_SIZE 20 | ||
636 | uint8_t vendor_specific0[SID_VENDOR_SPECIFIC_0_SIZE]; | ||
637 | /* | ||
638 | * An extension of SCSI Parallel Specific Values | ||
639 | */ | ||
640 | #define SID_SPI_IUS 0x01 | ||
641 | #define SID_SPI_QAS 0x02 | ||
642 | #define SID_SPI_CLOCK_ST 0x00 | ||
643 | #define SID_SPI_CLOCK_DT 0x04 | ||
644 | #define SID_SPI_CLOCK_DT_ST 0x0C | ||
645 | #define SID_SPI_MASK 0x0F | ||
646 | uint8_t spi3data; | ||
647 | uint8_t reserved2; | ||
648 | /* | ||
649 | * Version Descriptors, stored 2 byte values. | ||
650 | */ | ||
651 | uint8_t version1[2]; | ||
652 | uint8_t version2[2]; | ||
653 | uint8_t version3[2]; | ||
654 | uint8_t version4[2]; | ||
655 | uint8_t version5[2]; | ||
656 | uint8_t version6[2]; | ||
657 | uint8_t version7[2]; | ||
658 | uint8_t version8[2]; | ||
659 | |||
660 | uint8_t reserved3[22]; | ||
661 | |||
662 | #define SID_VENDOR_SPECIFIC_1_SIZE 160 | ||
663 | uint8_t vendor_specific1[SID_VENDOR_SPECIFIC_1_SIZE]; | ||
664 | }; | ||
665 | |||
666 | struct scsi_vpd_unit_serial_number | ||
667 | { | ||
668 | uint8_t device; | ||
669 | uint8_t page_code; | ||
670 | #define SVPD_UNIT_SERIAL_NUMBER 0x80 | ||
671 | uint8_t reserved; | ||
672 | uint8_t length; /* serial number length */ | ||
673 | #define SVPD_SERIAL_NUM_SIZE 251 | ||
674 | uint8_t serial_num[SVPD_SERIAL_NUM_SIZE]; | ||
675 | }; | ||
676 | |||
677 | struct scsi_read_capacity | ||
678 | { | ||
679 | uint8_t opcode; | ||
680 | uint8_t byte2; | ||
681 | uint8_t addr[4]; | ||
682 | uint8_t unused[3]; | ||
683 | uint8_t control; | ||
684 | }; | ||
685 | |||
686 | struct scsi_read_capacity_data | ||
687 | { | ||
688 | uint8_t addr[4]; | ||
689 | uint8_t length[4]; | ||
690 | }; | ||
691 | |||
692 | struct scsi_report_luns | ||
693 | { | ||
694 | uint8_t opcode; | ||
695 | uint8_t byte2; | ||
696 | uint8_t unused[3]; | ||
697 | uint8_t addr[4]; | ||
698 | uint8_t control; | ||
699 | }; | ||
700 | |||
701 | struct scsi_report_luns_data { | ||
702 | uint8_t length[4]; /* length of LUN inventory, in bytes */ | ||
703 | uint8_t reserved[4]; /* unused */ | ||
704 | /* | ||
705 | * LUN inventory- we only support the type zero form for now. | ||
706 | */ | ||
707 | struct { | ||
708 | uint8_t lundata[8]; | ||
709 | } luns[1]; | ||
710 | }; | ||
711 | #define RPL_LUNDATA_ATYP_MASK 0xc0 /* MBZ for type 0 lun */ | ||
712 | #define RPL_LUNDATA_T0LUN 1 /* @ lundata[1] */ | ||
713 | |||
714 | |||
715 | struct scsi_sense_data | 75 | struct scsi_sense_data |
716 | { | 76 | { |
717 | uint8_t error_code; | 77 | uint8_t error_code; |
@@ -757,41 +117,6 @@ struct scsi_sense_data | |||
757 | #define SSD_FULL_SIZE sizeof(struct scsi_sense_data) | 117 | #define SSD_FULL_SIZE sizeof(struct scsi_sense_data) |
758 | }; | 118 | }; |
759 | 119 | ||
760 | struct scsi_mode_header_6 | ||
761 | { | ||
762 | uint8_t data_length; /* Sense data length */ | ||
763 | uint8_t medium_type; | ||
764 | uint8_t dev_spec; | ||
765 | uint8_t blk_desc_len; | ||
766 | }; | ||
767 | |||
768 | struct scsi_mode_header_10 | ||
769 | { | ||
770 | uint8_t data_length[2];/* Sense data length */ | ||
771 | uint8_t medium_type; | ||
772 | uint8_t dev_spec; | ||
773 | uint8_t unused[2]; | ||
774 | uint8_t blk_desc_len[2]; | ||
775 | }; | ||
776 | |||
777 | struct scsi_mode_page_header | ||
778 | { | ||
779 | uint8_t page_code; | ||
780 | uint8_t page_length; | ||
781 | }; | ||
782 | |||
783 | struct scsi_mode_blk_desc | ||
784 | { | ||
785 | uint8_t density; | ||
786 | uint8_t nblocks[3]; | ||
787 | uint8_t reserved; | ||
788 | uint8_t blklen[3]; | ||
789 | }; | ||
790 | |||
791 | #define SCSI_DEFAULT_DENSITY 0x00 /* use 'default' density */ | ||
792 | #define SCSI_SAME_DENSITY 0x7f /* use 'same' density- >= SCSI-2 only */ | ||
793 | |||
794 | |||
795 | /* | 120 | /* |
796 | * Status Byte | 121 | * Status Byte |
797 | */ | 122 | */ |
@@ -807,76 +132,7 @@ struct scsi_mode_blk_desc | |||
807 | #define SCSI_STATUS_ACA_ACTIVE 0x30 | 132 | #define SCSI_STATUS_ACA_ACTIVE 0x30 |
808 | #define SCSI_STATUS_TASK_ABORTED 0x40 | 133 | #define SCSI_STATUS_TASK_ABORTED 0x40 |
809 | 134 | ||
810 | struct scsi_inquiry_pattern { | ||
811 | uint8_t type; | ||
812 | uint8_t media_type; | ||
813 | #define SIP_MEDIA_REMOVABLE 0x01 | ||
814 | #define SIP_MEDIA_FIXED 0x02 | ||
815 | const char *vendor; | ||
816 | const char *product; | ||
817 | const char *revision; | ||
818 | }; | ||
819 | |||
820 | struct scsi_static_inquiry_pattern { | ||
821 | uint8_t type; | ||
822 | uint8_t media_type; | ||
823 | char vendor[SID_VENDOR_SIZE+1]; | ||
824 | char product[SID_PRODUCT_SIZE+1]; | ||
825 | char revision[SID_REVISION_SIZE+1]; | ||
826 | }; | ||
827 | |||
828 | struct scsi_sense_quirk_entry { | ||
829 | struct scsi_inquiry_pattern inq_pat; | ||
830 | int num_sense_keys; | ||
831 | int num_ascs; | ||
832 | struct sense_key_table_entry *sense_key_info; | ||
833 | struct asc_table_entry *asc_info; | ||
834 | }; | ||
835 | |||
836 | struct sense_key_table_entry { | ||
837 | uint8_t sense_key; | ||
838 | uint32_t action; | ||
839 | const char *desc; | ||
840 | }; | ||
841 | |||
842 | struct asc_table_entry { | ||
843 | uint8_t asc; | ||
844 | uint8_t ascq; | ||
845 | uint32_t action; | ||
846 | const char *desc; | ||
847 | }; | ||
848 | |||
849 | struct op_table_entry { | ||
850 | uint8_t opcode; | ||
851 | uint16_t opmask; | ||
852 | const char *desc; | ||
853 | }; | ||
854 | |||
855 | struct scsi_op_quirk_entry { | ||
856 | struct scsi_inquiry_pattern inq_pat; | ||
857 | int num_ops; | ||
858 | struct op_table_entry *op_table; | ||
859 | }; | ||
860 | |||
861 | typedef enum { | ||
862 | SSS_FLAG_NONE = 0x00, | ||
863 | SSS_FLAG_PRINT_COMMAND = 0x01 | ||
864 | } scsi_sense_string_flags; | ||
865 | |||
866 | extern const char *scsi_sense_key_text[]; | ||
867 | |||
868 | /************************* Large Disk Handling ********************************/ | 135 | /************************* Large Disk Handling ********************************/ |
869 | #if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0) | ||
870 | static __inline int aic_sector_div(u_long capacity, int heads, int sectors); | ||
871 | |||
872 | static __inline int | ||
873 | aic_sector_div(u_long capacity, int heads, int sectors) | ||
874 | { | ||
875 | return (capacity / (heads * sectors)); | ||
876 | } | ||
877 | #else | ||
878 | static __inline int aic_sector_div(sector_t capacity, int heads, int sectors); | ||
879 | |||
880 | static __inline int | 136 | static __inline int |
881 | aic_sector_div(sector_t capacity, int heads, int sectors) | 137 | aic_sector_div(sector_t capacity, int heads, int sectors) |
882 | { | 138 | { |
@@ -884,7 +140,6 @@ aic_sector_div(sector_t capacity, int heads, int sectors) | |||
884 | sector_div(capacity, (heads * sectors)); | 140 | sector_div(capacity, (heads * sectors)); |
885 | return (int)capacity; | 141 | return (int)capacity; |
886 | } | 142 | } |
887 | #endif | ||
888 | 143 | ||
889 | /**************************** Module Library Hack *****************************/ | 144 | /**************************** Module Library Hack *****************************/ |
890 | /* | 145 | /* |
@@ -899,138 +154,15 @@ aic_sector_div(sector_t capacity, int heads, int sectors) | |||
899 | #define AIC_LIB_ENTRY_EXPAND(x, prefix) AIC_LIB_ENTRY_CONCAT(x, prefix) | 154 | #define AIC_LIB_ENTRY_EXPAND(x, prefix) AIC_LIB_ENTRY_CONCAT(x, prefix) |
900 | #define AIC_LIB_ENTRY(x) AIC_LIB_ENTRY_EXPAND(x, AIC_LIB_PREFIX) | 155 | #define AIC_LIB_ENTRY(x) AIC_LIB_ENTRY_EXPAND(x, AIC_LIB_PREFIX) |
901 | 156 | ||
902 | #define aic_sense_desc AIC_LIB_ENTRY(_sense_desc) | ||
903 | #define aic_sense_error_action AIC_LIB_ENTRY(_sense_error_action) | ||
904 | #define aic_error_action AIC_LIB_ENTRY(_error_action) | ||
905 | #define aic_op_desc AIC_LIB_ENTRY(_op_desc) | ||
906 | #define aic_cdb_string AIC_LIB_ENTRY(_cdb_string) | ||
907 | #define aic_print_inquiry AIC_LIB_ENTRY(_print_inquiry) | ||
908 | #define aic_calc_syncsrate AIC_LIB_ENTRY(_calc_syncrate) | 157 | #define aic_calc_syncsrate AIC_LIB_ENTRY(_calc_syncrate) |
909 | #define aic_calc_syncparam AIC_LIB_ENTRY(_calc_syncparam) | ||
910 | #define aic_calc_speed AIC_LIB_ENTRY(_calc_speed) | ||
911 | #define aic_inquiry_match AIC_LIB_ENTRY(_inquiry_match) | ||
912 | #define aic_static_inquiry_match AIC_LIB_ENTRY(_static_inquiry_match) | ||
913 | #define aic_parse_brace_option AIC_LIB_ENTRY(_parse_brace_option) | ||
914 | |||
915 | /******************************************************************************/ | ||
916 | |||
917 | void aic_sense_desc(int /*sense_key*/, int /*asc*/, | ||
918 | int /*ascq*/, struct scsi_inquiry_data*, | ||
919 | const char** /*sense_key_desc*/, | ||
920 | const char** /*asc_desc*/); | ||
921 | aic_sense_action aic_sense_error_action(struct scsi_sense_data*, | ||
922 | struct scsi_inquiry_data*, | ||
923 | uint32_t /*sense_flags*/); | ||
924 | uint32_t aic_error_action(struct scsi_cmnd *, | ||
925 | struct scsi_inquiry_data *, | ||
926 | cam_status, u_int); | ||
927 | |||
928 | #define SF_RETRY_UA 0x01 | ||
929 | #define SF_NO_PRINT 0x02 | ||
930 | #define SF_QUIET_IR 0x04 /* Be quiet about Illegal Request reponses */ | ||
931 | #define SF_PRINT_ALWAYS 0x08 | ||
932 | |||
933 | |||
934 | const char * aic_op_desc(uint16_t /*opcode*/, struct scsi_inquiry_data*); | ||
935 | char * aic_cdb_string(uint8_t* /*cdb_ptr*/, char* /*cdb_string*/, | ||
936 | size_t /*len*/); | ||
937 | void aic_print_inquiry(struct scsi_inquiry_data*); | ||
938 | 158 | ||
939 | u_int aic_calc_syncsrate(u_int /*period_factor*/); | 159 | u_int aic_calc_syncsrate(u_int /*period_factor*/); |
940 | u_int aic_calc_syncparam(u_int /*period*/); | ||
941 | u_int aic_calc_speed(u_int width, u_int period, u_int offset, | ||
942 | u_int min_rate); | ||
943 | |||
944 | int aic_inquiry_match(caddr_t /*inqbuffer*/, | ||
945 | caddr_t /*table_entry*/); | ||
946 | int aic_static_inquiry_match(caddr_t /*inqbuffer*/, | ||
947 | caddr_t /*table_entry*/); | ||
948 | 160 | ||
949 | typedef void aic_option_callback_t(u_long, int, int, int32_t); | 161 | typedef void aic_option_callback_t(u_long, int, int, int32_t); |
950 | char * aic_parse_brace_option(char *opt_name, char *opt_arg, | 162 | char * aic_parse_brace_option(char *opt_name, char *opt_arg, |
951 | char *end, int depth, | 163 | char *end, int depth, |
952 | aic_option_callback_t *, u_long); | 164 | aic_option_callback_t *, u_long); |
953 | 165 | ||
954 | static __inline void scsi_extract_sense(struct scsi_sense_data *sense, | ||
955 | int *error_code, int *sense_key, | ||
956 | int *asc, int *ascq); | ||
957 | static __inline void scsi_ulto2b(uint32_t val, uint8_t *bytes); | ||
958 | static __inline void scsi_ulto3b(uint32_t val, uint8_t *bytes); | ||
959 | static __inline void scsi_ulto4b(uint32_t val, uint8_t *bytes); | ||
960 | static __inline uint32_t scsi_2btoul(uint8_t *bytes); | ||
961 | static __inline uint32_t scsi_3btoul(uint8_t *bytes); | ||
962 | static __inline int32_t scsi_3btol(uint8_t *bytes); | ||
963 | static __inline uint32_t scsi_4btoul(uint8_t *bytes); | ||
964 | |||
965 | static __inline void scsi_extract_sense(struct scsi_sense_data *sense, | ||
966 | int *error_code, int *sense_key, | ||
967 | int *asc, int *ascq) | ||
968 | { | ||
969 | *error_code = sense->error_code & SSD_ERRCODE; | ||
970 | *sense_key = sense->flags & SSD_KEY; | ||
971 | *asc = (sense->extra_len >= 5) ? sense->add_sense_code : 0; | ||
972 | *ascq = (sense->extra_len >= 6) ? sense->add_sense_code_qual : 0; | ||
973 | } | ||
974 | |||
975 | static __inline void | ||
976 | scsi_ulto2b(uint32_t val, uint8_t *bytes) | ||
977 | { | ||
978 | |||
979 | bytes[0] = (val >> 8) & 0xff; | ||
980 | bytes[1] = val & 0xff; | ||
981 | } | ||
982 | |||
983 | static __inline void | ||
984 | scsi_ulto3b(uint32_t val, uint8_t *bytes) | ||
985 | { | ||
986 | |||
987 | bytes[0] = (val >> 16) & 0xff; | ||
988 | bytes[1] = (val >> 8) & 0xff; | ||
989 | bytes[2] = val & 0xff; | ||
990 | } | ||
991 | |||
992 | static __inline void | ||
993 | scsi_ulto4b(uint32_t val, uint8_t *bytes) | ||
994 | { | ||
995 | |||
996 | bytes[0] = (val >> 24) & 0xff; | ||
997 | bytes[1] = (val >> 16) & 0xff; | ||
998 | bytes[2] = (val >> 8) & 0xff; | ||
999 | bytes[3] = val & 0xff; | ||
1000 | } | ||
1001 | |||
1002 | static __inline uint32_t | ||
1003 | scsi_2btoul(uint8_t *bytes) | ||
1004 | { | ||
1005 | uint32_t rv; | ||
1006 | |||
1007 | rv = (bytes[0] << 8) | | ||
1008 | bytes[1]; | ||
1009 | return (rv); | ||
1010 | } | ||
1011 | |||
1012 | static __inline uint32_t | ||
1013 | scsi_3btoul(uint8_t *bytes) | ||
1014 | { | ||
1015 | uint32_t rv; | ||
1016 | |||
1017 | rv = (bytes[0] << 16) | | ||
1018 | (bytes[1] << 8) | | ||
1019 | bytes[2]; | ||
1020 | return (rv); | ||
1021 | } | ||
1022 | |||
1023 | static __inline int32_t | ||
1024 | scsi_3btol(uint8_t *bytes) | ||
1025 | { | ||
1026 | uint32_t rc = scsi_3btoul(bytes); | ||
1027 | |||
1028 | if (rc & 0x00800000) | ||
1029 | rc |= 0xff000000; | ||
1030 | |||
1031 | return (int32_t) rc; | ||
1032 | } | ||
1033 | |||
1034 | static __inline uint32_t | 166 | static __inline uint32_t |
1035 | scsi_4btoul(uint8_t *bytes) | 167 | scsi_4btoul(uint8_t *bytes) |
1036 | { | 168 | { |