aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/scsi/aic7xxx/aic7xxx_pci.c
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@ppc970.osdl.org>2005-04-16 18:20:36 -0400
committerLinus Torvalds <torvalds@ppc970.osdl.org>2005-04-16 18:20:36 -0400
commit1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 (patch)
tree0bba044c4ce775e45a88a51686b5d9f90697ea9d /drivers/scsi/aic7xxx/aic7xxx_pci.c
Linux-2.6.12-rc2v2.6.12-rc2
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
Diffstat (limited to 'drivers/scsi/aic7xxx/aic7xxx_pci.c')
-rw-r--r--drivers/scsi/aic7xxx/aic7xxx_pci.c2407
1 files changed, 2407 insertions, 0 deletions
diff --git a/drivers/scsi/aic7xxx/aic7xxx_pci.c b/drivers/scsi/aic7xxx/aic7xxx_pci.c
new file mode 100644
index 000000000000..7ddcc97fb243
--- /dev/null
+++ b/drivers/scsi/aic7xxx/aic7xxx_pci.c
@@ -0,0 +1,2407 @@
1/*
2 * Product specific probe and attach routines for:
3 * 3940, 2940, aic7895, aic7890, aic7880,
4 * aic7870, aic7860 and aic7850 SCSI controllers
5 *
6 * Copyright (c) 1994-2001 Justin T. Gibbs.
7 * Copyright (c) 2000-2001 Adaptec Inc.
8 * All rights reserved.
9 *
10 * Redistribution and use in source and binary forms, with or without
11 * modification, are permitted provided that the following conditions
12 * are met:
13 * 1. Redistributions of source code must retain the above copyright
14 * notice, this list of conditions, and the following disclaimer,
15 * without modification.
16 * 2. Redistributions in binary form must reproduce at minimum a disclaimer
17 * substantially similar to the "NO WARRANTY" disclaimer below
18 * ("Disclaimer") and any redistribution must be conditioned upon
19 * including a substantially similar Disclaimer requirement for further
20 * binary redistribution.
21 * 3. Neither the names of the above-listed copyright holders nor the names
22 * of any contributors may be used to endorse or promote products derived
23 * from this software without specific prior written permission.
24 *
25 * Alternatively, this software may be distributed under the terms of the
26 * GNU General Public License ("GPL") version 2 as published by the Free
27 * Software Foundation.
28 *
29 * NO WARRANTY
30 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
31 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
32 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
33 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
34 * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
35 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
36 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
37 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
38 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
39 * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
40 * POSSIBILITY OF SUCH DAMAGES.
41 *
42 * $Id: //depot/aic7xxx/aic7xxx/aic7xxx_pci.c#69 $
43 *
44 * $FreeBSD$
45 */
46
47#ifdef __linux__
48#include "aic7xxx_osm.h"
49#include "aic7xxx_inline.h"
50#include "aic7xxx_93cx6.h"
51#else
52#include <dev/aic7xxx/aic7xxx_osm.h>
53#include <dev/aic7xxx/aic7xxx_inline.h>
54#include <dev/aic7xxx/aic7xxx_93cx6.h>
55#endif
56
57#include "aic7xxx_pci.h"
58
59static __inline uint64_t
60ahc_compose_id(u_int device, u_int vendor, u_int subdevice, u_int subvendor)
61{
62 uint64_t id;
63
64 id = subvendor
65 | (subdevice << 16)
66 | ((uint64_t)vendor << 32)
67 | ((uint64_t)device << 48);
68
69 return (id);
70}
71
72#define AHC_PCI_IOADDR PCIR_MAPS /* I/O Address */
73#define AHC_PCI_MEMADDR (PCIR_MAPS + 4) /* Mem I/O Address */
74
75#define DEVID_9005_TYPE(id) ((id) & 0xF)
76#define DEVID_9005_TYPE_HBA 0x0 /* Standard Card */
77#define DEVID_9005_TYPE_AAA 0x3 /* RAID Card */
78#define DEVID_9005_TYPE_SISL 0x5 /* Container ROMB */
79#define DEVID_9005_TYPE_MB 0xF /* On Motherboard */
80
81#define DEVID_9005_MAXRATE(id) (((id) & 0x30) >> 4)
82#define DEVID_9005_MAXRATE_U160 0x0
83#define DEVID_9005_MAXRATE_ULTRA2 0x1
84#define DEVID_9005_MAXRATE_ULTRA 0x2
85#define DEVID_9005_MAXRATE_FAST 0x3
86
87#define DEVID_9005_MFUNC(id) (((id) & 0x40) >> 6)
88
89#define DEVID_9005_CLASS(id) (((id) & 0xFF00) >> 8)
90#define DEVID_9005_CLASS_SPI 0x0 /* Parallel SCSI */
91
92#define SUBID_9005_TYPE(id) ((id) & 0xF)
93#define SUBID_9005_TYPE_MB 0xF /* On Motherboard */
94#define SUBID_9005_TYPE_CARD 0x0 /* Standard Card */
95#define SUBID_9005_TYPE_LCCARD 0x1 /* Low Cost Card */
96#define SUBID_9005_TYPE_RAID 0x3 /* Combined with Raid */
97
98#define SUBID_9005_TYPE_KNOWN(id) \
99 ((((id) & 0xF) == SUBID_9005_TYPE_MB) \
100 || (((id) & 0xF) == SUBID_9005_TYPE_CARD) \
101 || (((id) & 0xF) == SUBID_9005_TYPE_LCCARD) \
102 || (((id) & 0xF) == SUBID_9005_TYPE_RAID))
103
104#define SUBID_9005_MAXRATE(id) (((id) & 0x30) >> 4)
105#define SUBID_9005_MAXRATE_ULTRA2 0x0
106#define SUBID_9005_MAXRATE_ULTRA 0x1
107#define SUBID_9005_MAXRATE_U160 0x2
108#define SUBID_9005_MAXRATE_RESERVED 0x3
109
110#define SUBID_9005_SEEPTYPE(id) \
111 ((SUBID_9005_TYPE(id) == SUBID_9005_TYPE_MB) \
112 ? ((id) & 0xC0) >> 6 \
113 : ((id) & 0x300) >> 8)
114#define SUBID_9005_SEEPTYPE_NONE 0x0
115#define SUBID_9005_SEEPTYPE_1K 0x1
116#define SUBID_9005_SEEPTYPE_2K_4K 0x2
117#define SUBID_9005_SEEPTYPE_RESERVED 0x3
118#define SUBID_9005_AUTOTERM(id) \
119 ((SUBID_9005_TYPE(id) == SUBID_9005_TYPE_MB) \
120 ? (((id) & 0x400) >> 10) == 0 \
121 : (((id) & 0x40) >> 6) == 0)
122
123#define SUBID_9005_NUMCHAN(id) \
124 ((SUBID_9005_TYPE(id) == SUBID_9005_TYPE_MB) \
125 ? ((id) & 0x300) >> 8 \
126 : ((id) & 0xC00) >> 10)
127
128#define SUBID_9005_LEGACYCONN(id) \
129 ((SUBID_9005_TYPE(id) == SUBID_9005_TYPE_MB) \
130 ? 0 \
131 : ((id) & 0x80) >> 7)
132
133#define SUBID_9005_MFUNCENB(id) \
134 ((SUBID_9005_TYPE(id) == SUBID_9005_TYPE_MB) \
135 ? ((id) & 0x800) >> 11 \
136 : ((id) & 0x1000) >> 12)
137/*
138 * Informational only. Should use chip register to be
139 * certain, but may be use in identification strings.
140 */
141#define SUBID_9005_CARD_SCSIWIDTH_MASK 0x2000
142#define SUBID_9005_CARD_PCIWIDTH_MASK 0x4000
143#define SUBID_9005_CARD_SEDIFF_MASK 0x8000
144
145static ahc_device_setup_t ahc_aic785X_setup;
146static ahc_device_setup_t ahc_aic7860_setup;
147static ahc_device_setup_t ahc_apa1480_setup;
148static ahc_device_setup_t ahc_aic7870_setup;
149static ahc_device_setup_t ahc_aha394X_setup;
150static ahc_device_setup_t ahc_aha494X_setup;
151static ahc_device_setup_t ahc_aha398X_setup;
152static ahc_device_setup_t ahc_aic7880_setup;
153static ahc_device_setup_t ahc_aha2940Pro_setup;
154static ahc_device_setup_t ahc_aha394XU_setup;
155static ahc_device_setup_t ahc_aha398XU_setup;
156static ahc_device_setup_t ahc_aic7890_setup;
157static ahc_device_setup_t ahc_aic7892_setup;
158static ahc_device_setup_t ahc_aic7895_setup;
159static ahc_device_setup_t ahc_aic7896_setup;
160static ahc_device_setup_t ahc_aic7899_setup;
161static ahc_device_setup_t ahc_aha29160C_setup;
162static ahc_device_setup_t ahc_raid_setup;
163static ahc_device_setup_t ahc_aha394XX_setup;
164static ahc_device_setup_t ahc_aha494XX_setup;
165static ahc_device_setup_t ahc_aha398XX_setup;
166
167struct ahc_pci_identity ahc_pci_ident_table [] =
168{
169 /* aic7850 based controllers */
170 {
171 ID_AHA_2902_04_10_15_20C_30C,
172 ID_ALL_MASK,
173 "Adaptec 2902/04/10/15/20C/30C SCSI adapter",
174 ahc_aic785X_setup
175 },
176 /* aic7860 based controllers */
177 {
178 ID_AHA_2930CU,
179 ID_ALL_MASK,
180 "Adaptec 2930CU SCSI adapter",
181 ahc_aic7860_setup
182 },
183 {
184 ID_AHA_1480A & ID_DEV_VENDOR_MASK,
185 ID_DEV_VENDOR_MASK,
186 "Adaptec 1480A Ultra SCSI adapter",
187 ahc_apa1480_setup
188 },
189 {
190 ID_AHA_2940AU_0 & ID_DEV_VENDOR_MASK,
191 ID_DEV_VENDOR_MASK,
192 "Adaptec 2940A Ultra SCSI adapter",
193 ahc_aic7860_setup
194 },
195 {
196 ID_AHA_2940AU_CN & ID_DEV_VENDOR_MASK,
197 ID_DEV_VENDOR_MASK,
198 "Adaptec 2940A/CN Ultra SCSI adapter",
199 ahc_aic7860_setup
200 },
201 {
202 ID_AHA_2930C_VAR & ID_DEV_VENDOR_MASK,
203 ID_DEV_VENDOR_MASK,
204 "Adaptec 2930C Ultra SCSI adapter (VAR)",
205 ahc_aic7860_setup
206 },
207 /* aic7870 based controllers */
208 {
209 ID_AHA_2940,
210 ID_ALL_MASK,
211 "Adaptec 2940 SCSI adapter",
212 ahc_aic7870_setup
213 },
214 {
215 ID_AHA_3940,
216 ID_ALL_MASK,
217 "Adaptec 3940 SCSI adapter",
218 ahc_aha394X_setup
219 },
220 {
221 ID_AHA_398X,
222 ID_ALL_MASK,
223 "Adaptec 398X SCSI RAID adapter",
224 ahc_aha398X_setup
225 },
226 {
227 ID_AHA_2944,
228 ID_ALL_MASK,
229 "Adaptec 2944 SCSI adapter",
230 ahc_aic7870_setup
231 },
232 {
233 ID_AHA_3944,
234 ID_ALL_MASK,
235 "Adaptec 3944 SCSI adapter",
236 ahc_aha394X_setup
237 },
238 {
239 ID_AHA_4944,
240 ID_ALL_MASK,
241 "Adaptec 4944 SCSI adapter",
242 ahc_aha494X_setup
243 },
244 /* aic7880 based controllers */
245 {
246 ID_AHA_2940U & ID_DEV_VENDOR_MASK,
247 ID_DEV_VENDOR_MASK,
248 "Adaptec 2940 Ultra SCSI adapter",
249 ahc_aic7880_setup
250 },
251 {
252 ID_AHA_3940U & ID_DEV_VENDOR_MASK,
253 ID_DEV_VENDOR_MASK,
254 "Adaptec 3940 Ultra SCSI adapter",
255 ahc_aha394XU_setup
256 },
257 {
258 ID_AHA_2944U & ID_DEV_VENDOR_MASK,
259 ID_DEV_VENDOR_MASK,
260 "Adaptec 2944 Ultra SCSI adapter",
261 ahc_aic7880_setup
262 },
263 {
264 ID_AHA_3944U & ID_DEV_VENDOR_MASK,
265 ID_DEV_VENDOR_MASK,
266 "Adaptec 3944 Ultra SCSI adapter",
267 ahc_aha394XU_setup
268 },
269 {
270 ID_AHA_398XU & ID_DEV_VENDOR_MASK,
271 ID_DEV_VENDOR_MASK,
272 "Adaptec 398X Ultra SCSI RAID adapter",
273 ahc_aha398XU_setup
274 },
275 {
276 /*
277 * XXX Don't know the slot numbers
278 * so we can't identify channels
279 */
280 ID_AHA_4944U & ID_DEV_VENDOR_MASK,
281 ID_DEV_VENDOR_MASK,
282 "Adaptec 4944 Ultra SCSI adapter",
283 ahc_aic7880_setup
284 },
285 {
286 ID_AHA_2930U & ID_DEV_VENDOR_MASK,
287 ID_DEV_VENDOR_MASK,
288 "Adaptec 2930 Ultra SCSI adapter",
289 ahc_aic7880_setup
290 },
291 {
292 ID_AHA_2940U_PRO & ID_DEV_VENDOR_MASK,
293 ID_DEV_VENDOR_MASK,
294 "Adaptec 2940 Pro Ultra SCSI adapter",
295 ahc_aha2940Pro_setup
296 },
297 {
298 ID_AHA_2940U_CN & ID_DEV_VENDOR_MASK,
299 ID_DEV_VENDOR_MASK,
300 "Adaptec 2940/CN Ultra SCSI adapter",
301 ahc_aic7880_setup
302 },
303 /* Ignore all SISL (AAC on MB) based controllers. */
304 {
305 ID_9005_SISL_ID,
306 ID_9005_SISL_MASK,
307 NULL,
308 NULL
309 },
310 /* aic7890 based controllers */
311 {
312 ID_AHA_2930U2,
313 ID_ALL_MASK,
314 "Adaptec 2930 Ultra2 SCSI adapter",
315 ahc_aic7890_setup
316 },
317 {
318 ID_AHA_2940U2B,
319 ID_ALL_MASK,
320 "Adaptec 2940B Ultra2 SCSI adapter",
321 ahc_aic7890_setup
322 },
323 {
324 ID_AHA_2940U2_OEM,
325 ID_ALL_MASK,
326 "Adaptec 2940 Ultra2 SCSI adapter (OEM)",
327 ahc_aic7890_setup
328 },
329 {
330 ID_AHA_2940U2,
331 ID_ALL_MASK,
332 "Adaptec 2940 Ultra2 SCSI adapter",
333 ahc_aic7890_setup
334 },
335 {
336 ID_AHA_2950U2B,
337 ID_ALL_MASK,
338 "Adaptec 2950 Ultra2 SCSI adapter",
339 ahc_aic7890_setup
340 },
341 {
342 ID_AIC7890_ARO,
343 ID_ALL_MASK,
344 "Adaptec aic7890/91 Ultra2 SCSI adapter (ARO)",
345 ahc_aic7890_setup
346 },
347 {
348 ID_AAA_131U2,
349 ID_ALL_MASK,
350 "Adaptec AAA-131 Ultra2 RAID adapter",
351 ahc_aic7890_setup
352 },
353 /* aic7892 based controllers */
354 {
355 ID_AHA_29160,
356 ID_ALL_MASK,
357 "Adaptec 29160 Ultra160 SCSI adapter",
358 ahc_aic7892_setup
359 },
360 {
361 ID_AHA_29160_CPQ,
362 ID_ALL_MASK,
363 "Adaptec (Compaq OEM) 29160 Ultra160 SCSI adapter",
364 ahc_aic7892_setup
365 },
366 {
367 ID_AHA_29160N,
368 ID_ALL_MASK,
369 "Adaptec 29160N Ultra160 SCSI adapter",
370 ahc_aic7892_setup
371 },
372 {
373 ID_AHA_29160C,
374 ID_ALL_MASK,
375 "Adaptec 29160C Ultra160 SCSI adapter",
376 ahc_aha29160C_setup
377 },
378 {
379 ID_AHA_29160B,
380 ID_ALL_MASK,
381 "Adaptec 29160B Ultra160 SCSI adapter",
382 ahc_aic7892_setup
383 },
384 {
385 ID_AHA_19160B,
386 ID_ALL_MASK,
387 "Adaptec 19160B Ultra160 SCSI adapter",
388 ahc_aic7892_setup
389 },
390 {
391 ID_AIC7892_ARO,
392 ID_ALL_MASK,
393 "Adaptec aic7892 Ultra160 SCSI adapter (ARO)",
394 ahc_aic7892_setup
395 },
396 /* aic7895 based controllers */
397 {
398 ID_AHA_2940U_DUAL,
399 ID_ALL_MASK,
400 "Adaptec 2940/DUAL Ultra SCSI adapter",
401 ahc_aic7895_setup
402 },
403 {
404 ID_AHA_3940AU,
405 ID_ALL_MASK,
406 "Adaptec 3940A Ultra SCSI adapter",
407 ahc_aic7895_setup
408 },
409 {
410 ID_AHA_3944AU,
411 ID_ALL_MASK,
412 "Adaptec 3944A Ultra SCSI adapter",
413 ahc_aic7895_setup
414 },
415 {
416 ID_AIC7895_ARO,
417 ID_AIC7895_ARO_MASK,
418 "Adaptec aic7895 Ultra SCSI adapter (ARO)",
419 ahc_aic7895_setup
420 },
421 /* aic7896/97 based controllers */
422 {
423 ID_AHA_3950U2B_0,
424 ID_ALL_MASK,
425 "Adaptec 3950B Ultra2 SCSI adapter",
426 ahc_aic7896_setup
427 },
428 {
429 ID_AHA_3950U2B_1,
430 ID_ALL_MASK,
431 "Adaptec 3950B Ultra2 SCSI adapter",
432 ahc_aic7896_setup
433 },
434 {
435 ID_AHA_3950U2D_0,
436 ID_ALL_MASK,
437 "Adaptec 3950D Ultra2 SCSI adapter",
438 ahc_aic7896_setup
439 },
440 {
441 ID_AHA_3950U2D_1,
442 ID_ALL_MASK,
443 "Adaptec 3950D Ultra2 SCSI adapter",
444 ahc_aic7896_setup
445 },
446 {
447 ID_AIC7896_ARO,
448 ID_ALL_MASK,
449 "Adaptec aic7896/97 Ultra2 SCSI adapter (ARO)",
450 ahc_aic7896_setup
451 },
452 /* aic7899 based controllers */
453 {
454 ID_AHA_3960D,
455 ID_ALL_MASK,
456 "Adaptec 3960D Ultra160 SCSI adapter",
457 ahc_aic7899_setup
458 },
459 {
460 ID_AHA_3960D_CPQ,
461 ID_ALL_MASK,
462 "Adaptec (Compaq OEM) 3960D Ultra160 SCSI adapter",
463 ahc_aic7899_setup
464 },
465 {
466 ID_AIC7899_ARO,
467 ID_ALL_MASK,
468 "Adaptec aic7899 Ultra160 SCSI adapter (ARO)",
469 ahc_aic7899_setup
470 },
471 /* Generic chip probes for devices we don't know 'exactly' */
472 {
473 ID_AIC7850 & ID_DEV_VENDOR_MASK,
474 ID_DEV_VENDOR_MASK,
475 "Adaptec aic7850 SCSI adapter",
476 ahc_aic785X_setup
477 },
478 {
479 ID_AIC7855 & ID_DEV_VENDOR_MASK,
480 ID_DEV_VENDOR_MASK,
481 "Adaptec aic7855 SCSI adapter",
482 ahc_aic785X_setup
483 },
484 {
485 ID_AIC7859 & ID_DEV_VENDOR_MASK,
486 ID_DEV_VENDOR_MASK,
487 "Adaptec aic7859 SCSI adapter",
488 ahc_aic7860_setup
489 },
490 {
491 ID_AIC7860 & ID_DEV_VENDOR_MASK,
492 ID_DEV_VENDOR_MASK,
493 "Adaptec aic7860 Ultra SCSI adapter",
494 ahc_aic7860_setup
495 },
496 {
497 ID_AIC7870 & ID_DEV_VENDOR_MASK,
498 ID_DEV_VENDOR_MASK,
499 "Adaptec aic7870 SCSI adapter",
500 ahc_aic7870_setup
501 },
502 {
503 ID_AIC7880 & ID_DEV_VENDOR_MASK,
504 ID_DEV_VENDOR_MASK,
505 "Adaptec aic7880 Ultra SCSI adapter",
506 ahc_aic7880_setup
507 },
508 {
509 ID_AIC7890 & ID_9005_GENERIC_MASK,
510 ID_9005_GENERIC_MASK,
511 "Adaptec aic7890/91 Ultra2 SCSI adapter",
512 ahc_aic7890_setup
513 },
514 {
515 ID_AIC7892 & ID_9005_GENERIC_MASK,
516 ID_9005_GENERIC_MASK,
517 "Adaptec aic7892 Ultra160 SCSI adapter",
518 ahc_aic7892_setup
519 },
520 {
521 ID_AIC7895 & ID_DEV_VENDOR_MASK,
522 ID_DEV_VENDOR_MASK,
523 "Adaptec aic7895 Ultra SCSI adapter",
524 ahc_aic7895_setup
525 },
526 {
527 ID_AIC7896 & ID_9005_GENERIC_MASK,
528 ID_9005_GENERIC_MASK,
529 "Adaptec aic7896/97 Ultra2 SCSI adapter",
530 ahc_aic7896_setup
531 },
532 {
533 ID_AIC7899 & ID_9005_GENERIC_MASK,
534 ID_9005_GENERIC_MASK,
535 "Adaptec aic7899 Ultra160 SCSI adapter",
536 ahc_aic7899_setup
537 },
538 {
539 ID_AIC7810 & ID_DEV_VENDOR_MASK,
540 ID_DEV_VENDOR_MASK,
541 "Adaptec aic7810 RAID memory controller",
542 ahc_raid_setup
543 },
544 {
545 ID_AIC7815 & ID_DEV_VENDOR_MASK,
546 ID_DEV_VENDOR_MASK,
547 "Adaptec aic7815 RAID memory controller",
548 ahc_raid_setup
549 }
550};
551
552const u_int ahc_num_pci_devs = NUM_ELEMENTS(ahc_pci_ident_table);
553
554#define AHC_394X_SLOT_CHANNEL_A 4
555#define AHC_394X_SLOT_CHANNEL_B 5
556
557#define AHC_398X_SLOT_CHANNEL_A 4
558#define AHC_398X_SLOT_CHANNEL_B 8
559#define AHC_398X_SLOT_CHANNEL_C 12
560
561#define AHC_494X_SLOT_CHANNEL_A 4
562#define AHC_494X_SLOT_CHANNEL_B 5
563#define AHC_494X_SLOT_CHANNEL_C 6
564#define AHC_494X_SLOT_CHANNEL_D 7
565
566#define DEVCONFIG 0x40
567#define PCIERRGENDIS 0x80000000ul
568#define SCBSIZE32 0x00010000ul /* aic789X only */
569#define REXTVALID 0x00001000ul /* ultra cards only */
570#define MPORTMODE 0x00000400ul /* aic7870+ only */
571#define RAMPSM 0x00000200ul /* aic7870+ only */
572#define VOLSENSE 0x00000100ul
573#define PCI64BIT 0x00000080ul /* 64Bit PCI bus (Ultra2 Only)*/
574#define SCBRAMSEL 0x00000080ul
575#define MRDCEN 0x00000040ul
576#define EXTSCBTIME 0x00000020ul /* aic7870 only */
577#define EXTSCBPEN 0x00000010ul /* aic7870 only */
578#define BERREN 0x00000008ul
579#define DACEN 0x00000004ul
580#define STPWLEVEL 0x00000002ul
581#define DIFACTNEGEN 0x00000001ul /* aic7870 only */
582
583#define CSIZE_LATTIME 0x0c
584#define CACHESIZE 0x0000003ful /* only 5 bits */
585#define LATTIME 0x0000ff00ul
586
587/* PCI STATUS definitions */
588#define DPE 0x80
589#define SSE 0x40
590#define RMA 0x20
591#define RTA 0x10
592#define STA 0x08
593#define DPR 0x01
594
595static int ahc_9005_subdevinfo_valid(uint16_t vendor, uint16_t device,
596 uint16_t subvendor, uint16_t subdevice);
597static int ahc_ext_scbram_present(struct ahc_softc *ahc);
598static void ahc_scbram_config(struct ahc_softc *ahc, int enable,
599 int pcheck, int fast, int large);
600static void ahc_probe_ext_scbram(struct ahc_softc *ahc);
601static void check_extport(struct ahc_softc *ahc, u_int *sxfrctl1);
602static void ahc_parse_pci_eeprom(struct ahc_softc *ahc,
603 struct seeprom_config *sc);
604static void configure_termination(struct ahc_softc *ahc,
605 struct seeprom_descriptor *sd,
606 u_int adapter_control,
607 u_int *sxfrctl1);
608
609static void ahc_new_term_detect(struct ahc_softc *ahc,
610 int *enableSEC_low,
611 int *enableSEC_high,
612 int *enablePRI_low,
613 int *enablePRI_high,
614 int *eeprom_present);
615static void aic787X_cable_detect(struct ahc_softc *ahc, int *internal50_present,
616 int *internal68_present,
617 int *externalcable_present,
618 int *eeprom_present);
619static void aic785X_cable_detect(struct ahc_softc *ahc, int *internal50_present,
620 int *externalcable_present,
621 int *eeprom_present);
622static void write_brdctl(struct ahc_softc *ahc, uint8_t value);
623static uint8_t read_brdctl(struct ahc_softc *ahc);
624static void ahc_pci_intr(struct ahc_softc *ahc);
625static int ahc_pci_chip_init(struct ahc_softc *ahc);
626static int ahc_pci_suspend(struct ahc_softc *ahc);
627static int ahc_pci_resume(struct ahc_softc *ahc);
628
629static int
630ahc_9005_subdevinfo_valid(uint16_t device, uint16_t vendor,
631 uint16_t subdevice, uint16_t subvendor)
632{
633 int result;
634
635 /* Default to invalid. */
636 result = 0;
637 if (vendor == 0x9005
638 && subvendor == 0x9005
639 && subdevice != device
640 && SUBID_9005_TYPE_KNOWN(subdevice) != 0) {
641
642 switch (SUBID_9005_TYPE(subdevice)) {
643 case SUBID_9005_TYPE_MB:
644 break;
645 case SUBID_9005_TYPE_CARD:
646 case SUBID_9005_TYPE_LCCARD:
647 /*
648 * Currently only trust Adaptec cards to
649 * get the sub device info correct.
650 */
651 if (DEVID_9005_TYPE(device) == DEVID_9005_TYPE_HBA)
652 result = 1;
653 break;
654 case SUBID_9005_TYPE_RAID:
655 break;
656 default:
657 break;
658 }
659 }
660 return (result);
661}
662
663struct ahc_pci_identity *
664ahc_find_pci_device(ahc_dev_softc_t pci)
665{
666 uint64_t full_id;
667 uint16_t device;
668 uint16_t vendor;
669 uint16_t subdevice;
670 uint16_t subvendor;
671 struct ahc_pci_identity *entry;
672 u_int i;
673
674 vendor = ahc_pci_read_config(pci, PCIR_DEVVENDOR, /*bytes*/2);
675 device = ahc_pci_read_config(pci, PCIR_DEVICE, /*bytes*/2);
676 subvendor = ahc_pci_read_config(pci, PCIR_SUBVEND_0, /*bytes*/2);
677 subdevice = ahc_pci_read_config(pci, PCIR_SUBDEV_0, /*bytes*/2);
678 full_id = ahc_compose_id(device, vendor, subdevice, subvendor);
679
680 /*
681 * If the second function is not hooked up, ignore it.
682 * Unfortunately, not all MB vendors implement the
683 * subdevice ID as per the Adaptec spec, so do our best
684 * to sanity check it prior to accepting the subdevice
685 * ID as valid.
686 */
687 if (ahc_get_pci_function(pci) > 0
688 && ahc_9005_subdevinfo_valid(vendor, device, subvendor, subdevice)
689 && SUBID_9005_MFUNCENB(subdevice) == 0)
690 return (NULL);
691
692 for (i = 0; i < ahc_num_pci_devs; i++) {
693 entry = &ahc_pci_ident_table[i];
694 if (entry->full_id == (full_id & entry->id_mask)) {
695 /* Honor exclusion entries. */
696 if (entry->name == NULL)
697 return (NULL);
698 return (entry);
699 }
700 }
701 return (NULL);
702}
703
704int
705ahc_pci_config(struct ahc_softc *ahc, struct ahc_pci_identity *entry)
706{
707 u_long l;
708 u_int command;
709 u_int our_id;
710 u_int sxfrctl1;
711 u_int scsiseq;
712 u_int dscommand0;
713 uint32_t devconfig;
714 int error;
715 uint8_t sblkctl;
716
717 our_id = 0;
718 error = entry->setup(ahc);
719 if (error != 0)
720 return (error);
721 ahc->chip |= AHC_PCI;
722 ahc->description = entry->name;
723
724 pci_set_power_state(ahc->dev_softc, AHC_POWER_STATE_D0);
725
726 error = ahc_pci_map_registers(ahc);
727 if (error != 0)
728 return (error);
729
730 /*
731 * Before we continue probing the card, ensure that
732 * its interrupts are *disabled*. We don't want
733 * a misstep to hang the machine in an interrupt
734 * storm.
735 */
736 ahc_intr_enable(ahc, FALSE);
737
738 devconfig = ahc_pci_read_config(ahc->dev_softc, DEVCONFIG, /*bytes*/4);
739
740 /*
741 * If we need to support high memory, enable dual
742 * address cycles. This bit must be set to enable
743 * high address bit generation even if we are on a
744 * 64bit bus (PCI64BIT set in devconfig).
745 */
746 if ((ahc->flags & AHC_39BIT_ADDRESSING) != 0) {
747
748 if (bootverbose)
749 printf("%s: Enabling 39Bit Addressing\n",
750 ahc_name(ahc));
751 devconfig |= DACEN;
752 }
753
754 /* Ensure that pci error generation, a test feature, is disabled. */
755 devconfig |= PCIERRGENDIS;
756
757 ahc_pci_write_config(ahc->dev_softc, DEVCONFIG, devconfig, /*bytes*/4);
758
759 /* Ensure busmastering is enabled */
760 command = ahc_pci_read_config(ahc->dev_softc, PCIR_COMMAND, /*bytes*/2);
761 command |= PCIM_CMD_BUSMASTEREN;
762
763 ahc_pci_write_config(ahc->dev_softc, PCIR_COMMAND, command, /*bytes*/2);
764
765 /* On all PCI adapters, we allow SCB paging */
766 ahc->flags |= AHC_PAGESCBS;
767
768 error = ahc_softc_init(ahc);
769 if (error != 0)
770 return (error);
771
772 /*
773 * Disable PCI parity error checking. Users typically
774 * do this to work around broken PCI chipsets that get
775 * the parity timing wrong and thus generate lots of spurious
776 * errors. The chip only allows us to disable *all* parity
777 * error reporting when doing this, so CIO bus, scb ram, and
778 * scratch ram parity errors will be ignored too.
779 */
780 if ((ahc->flags & AHC_DISABLE_PCI_PERR) != 0)
781 ahc->seqctl |= FAILDIS;
782
783 ahc->bus_intr = ahc_pci_intr;
784 ahc->bus_chip_init = ahc_pci_chip_init;
785 ahc->bus_suspend = ahc_pci_suspend;
786 ahc->bus_resume = ahc_pci_resume;
787
788 /* Remeber how the card was setup in case there is no SEEPROM */
789 if ((ahc_inb(ahc, HCNTRL) & POWRDN) == 0) {
790 ahc_pause(ahc);
791 if ((ahc->features & AHC_ULTRA2) != 0)
792 our_id = ahc_inb(ahc, SCSIID_ULTRA2) & OID;
793 else
794 our_id = ahc_inb(ahc, SCSIID) & OID;
795 sxfrctl1 = ahc_inb(ahc, SXFRCTL1) & STPWEN;
796 scsiseq = ahc_inb(ahc, SCSISEQ);
797 } else {
798 sxfrctl1 = STPWEN;
799 our_id = 7;
800 scsiseq = 0;
801 }
802
803 error = ahc_reset(ahc, /*reinit*/FALSE);
804 if (error != 0)
805 return (ENXIO);
806
807 if ((ahc->features & AHC_DT) != 0) {
808 u_int sfunct;
809
810 /* Perform ALT-Mode Setup */
811 sfunct = ahc_inb(ahc, SFUNCT) & ~ALT_MODE;
812 ahc_outb(ahc, SFUNCT, sfunct | ALT_MODE);
813 ahc_outb(ahc, OPTIONMODE,
814 OPTIONMODE_DEFAULTS|AUTOACKEN|BUSFREEREV|EXPPHASEDIS);
815 ahc_outb(ahc, SFUNCT, sfunct);
816
817 /* Normal mode setup */
818 ahc_outb(ahc, CRCCONTROL1, CRCVALCHKEN|CRCENDCHKEN|CRCREQCHKEN
819 |TARGCRCENDEN);
820 }
821
822 dscommand0 = ahc_inb(ahc, DSCOMMAND0);
823 dscommand0 |= MPARCKEN|CACHETHEN;
824 if ((ahc->features & AHC_ULTRA2) != 0) {
825
826 /*
827 * DPARCKEN doesn't work correctly on
828 * some MBs so don't use it.
829 */
830 dscommand0 &= ~DPARCKEN;
831 }
832
833 /*
834 * Handle chips that must have cache line
835 * streaming (dis/en)abled.
836 */
837 if ((ahc->bugs & AHC_CACHETHEN_DIS_BUG) != 0)
838 dscommand0 |= CACHETHEN;
839
840 if ((ahc->bugs & AHC_CACHETHEN_BUG) != 0)
841 dscommand0 &= ~CACHETHEN;
842
843 ahc_outb(ahc, DSCOMMAND0, dscommand0);
844
845 ahc->pci_cachesize =
846 ahc_pci_read_config(ahc->dev_softc, CSIZE_LATTIME,
847 /*bytes*/1) & CACHESIZE;
848 ahc->pci_cachesize *= 4;
849
850 if ((ahc->bugs & AHC_PCI_2_1_RETRY_BUG) != 0
851 && ahc->pci_cachesize == 4) {
852
853 ahc_pci_write_config(ahc->dev_softc, CSIZE_LATTIME,
854 0, /*bytes*/1);
855 ahc->pci_cachesize = 0;
856 }
857
858 /*
859 * We cannot perform ULTRA speeds without the presense
860 * of the external precision resistor.
861 */
862 if ((ahc->features & AHC_ULTRA) != 0) {
863 uint32_t devconfig;
864
865 devconfig = ahc_pci_read_config(ahc->dev_softc,
866 DEVCONFIG, /*bytes*/4);
867 if ((devconfig & REXTVALID) == 0)
868 ahc->features &= ~AHC_ULTRA;
869 }
870
871 /* See if we have a SEEPROM and perform auto-term */
872 check_extport(ahc, &sxfrctl1);
873
874 /*
875 * Take the LED out of diagnostic mode
876 */
877 sblkctl = ahc_inb(ahc, SBLKCTL);
878 ahc_outb(ahc, SBLKCTL, (sblkctl & ~(DIAGLEDEN|DIAGLEDON)));
879
880 if ((ahc->features & AHC_ULTRA2) != 0) {
881 ahc_outb(ahc, DFF_THRSH, RD_DFTHRSH_MAX|WR_DFTHRSH_MAX);
882 } else {
883 ahc_outb(ahc, DSPCISTATUS, DFTHRSH_100);
884 }
885
886 if (ahc->flags & AHC_USEDEFAULTS) {
887 /*
888 * PCI Adapter default setup
889 * Should only be used if the adapter does not have
890 * a SEEPROM.
891 */
892 /* See if someone else set us up already */
893 if ((ahc->flags & AHC_NO_BIOS_INIT) == 0
894 && scsiseq != 0) {
895 printf("%s: Using left over BIOS settings\n",
896 ahc_name(ahc));
897 ahc->flags &= ~AHC_USEDEFAULTS;
898 ahc->flags |= AHC_BIOS_ENABLED;
899 } else {
900 /*
901 * Assume only one connector and always turn
902 * on termination.
903 */
904 our_id = 0x07;
905 sxfrctl1 = STPWEN;
906 }
907 ahc_outb(ahc, SCSICONF, our_id|ENSPCHK|RESET_SCSI);
908
909 ahc->our_id = our_id;
910 }
911
912 /*
913 * Take a look to see if we have external SRAM.
914 * We currently do not attempt to use SRAM that is
915 * shared among multiple controllers.
916 */
917 ahc_probe_ext_scbram(ahc);
918
919 /*
920 * Record our termination setting for the
921 * generic initialization routine.
922 */
923 if ((sxfrctl1 & STPWEN) != 0)
924 ahc->flags |= AHC_TERM_ENB_A;
925
926 /*
927 * Save chip register configuration data for chip resets
928 * that occur during runtime and resume events.
929 */
930 ahc->bus_softc.pci_softc.devconfig =
931 ahc_pci_read_config(ahc->dev_softc, DEVCONFIG, /*bytes*/4);
932 ahc->bus_softc.pci_softc.command =
933 ahc_pci_read_config(ahc->dev_softc, PCIR_COMMAND, /*bytes*/1);
934 ahc->bus_softc.pci_softc.csize_lattime =
935 ahc_pci_read_config(ahc->dev_softc, CSIZE_LATTIME, /*bytes*/1);
936 ahc->bus_softc.pci_softc.dscommand0 = ahc_inb(ahc, DSCOMMAND0);
937 ahc->bus_softc.pci_softc.dspcistatus = ahc_inb(ahc, DSPCISTATUS);
938 if ((ahc->features & AHC_DT) != 0) {
939 u_int sfunct;
940
941 sfunct = ahc_inb(ahc, SFUNCT) & ~ALT_MODE;
942 ahc_outb(ahc, SFUNCT, sfunct | ALT_MODE);
943 ahc->bus_softc.pci_softc.optionmode = ahc_inb(ahc, OPTIONMODE);
944 ahc->bus_softc.pci_softc.targcrccnt = ahc_inw(ahc, TARGCRCCNT);
945 ahc_outb(ahc, SFUNCT, sfunct);
946 ahc->bus_softc.pci_softc.crccontrol1 =
947 ahc_inb(ahc, CRCCONTROL1);
948 }
949 if ((ahc->features & AHC_MULTI_FUNC) != 0)
950 ahc->bus_softc.pci_softc.scbbaddr = ahc_inb(ahc, SCBBADDR);
951
952 if ((ahc->features & AHC_ULTRA2) != 0)
953 ahc->bus_softc.pci_softc.dff_thrsh = ahc_inb(ahc, DFF_THRSH);
954
955 /* Core initialization */
956 error = ahc_init(ahc);
957 if (error != 0)
958 return (error);
959
960 /*
961 * Allow interrupts now that we are completely setup.
962 */
963 error = ahc_pci_map_int(ahc);
964 if (error != 0)
965 return (error);
966
967 ahc_list_lock(&l);
968 /*
969 * Link this softc in with all other ahc instances.
970 */
971 ahc_softc_insert(ahc);
972 ahc_list_unlock(&l);
973 return (0);
974}
975
976/*
977 * Test for the presense of external sram in an
978 * "unshared" configuration.
979 */
980static int
981ahc_ext_scbram_present(struct ahc_softc *ahc)
982{
983 u_int chip;
984 int ramps;
985 int single_user;
986 uint32_t devconfig;
987
988 chip = ahc->chip & AHC_CHIPID_MASK;
989 devconfig = ahc_pci_read_config(ahc->dev_softc,
990 DEVCONFIG, /*bytes*/4);
991 single_user = (devconfig & MPORTMODE) != 0;
992
993 if ((ahc->features & AHC_ULTRA2) != 0)
994 ramps = (ahc_inb(ahc, DSCOMMAND0) & RAMPS) != 0;
995 else if (chip == AHC_AIC7895 || chip == AHC_AIC7895C)
996 /*
997 * External SCBRAM arbitration is flakey
998 * on these chips. Unfortunately this means
999 * we don't use the extra SCB ram space on the
1000 * 3940AUW.
1001 */
1002 ramps = 0;
1003 else if (chip >= AHC_AIC7870)
1004 ramps = (devconfig & RAMPSM) != 0;
1005 else
1006 ramps = 0;
1007
1008 if (ramps && single_user)
1009 return (1);
1010 return (0);
1011}
1012
1013/*
1014 * Enable external scbram.
1015 */
1016static void
1017ahc_scbram_config(struct ahc_softc *ahc, int enable, int pcheck,
1018 int fast, int large)
1019{
1020 uint32_t devconfig;
1021
1022 if (ahc->features & AHC_MULTI_FUNC) {
1023 /*
1024 * Set the SCB Base addr (highest address bit)
1025 * depending on which channel we are.
1026 */
1027 ahc_outb(ahc, SCBBADDR, ahc_get_pci_function(ahc->dev_softc));
1028 }
1029
1030 ahc->flags &= ~AHC_LSCBS_ENABLED;
1031 if (large)
1032 ahc->flags |= AHC_LSCBS_ENABLED;
1033 devconfig = ahc_pci_read_config(ahc->dev_softc, DEVCONFIG, /*bytes*/4);
1034 if ((ahc->features & AHC_ULTRA2) != 0) {
1035 u_int dscommand0;
1036
1037 dscommand0 = ahc_inb(ahc, DSCOMMAND0);
1038 if (enable)
1039 dscommand0 &= ~INTSCBRAMSEL;
1040 else
1041 dscommand0 |= INTSCBRAMSEL;
1042 if (large)
1043 dscommand0 &= ~USCBSIZE32;
1044 else
1045 dscommand0 |= USCBSIZE32;
1046 ahc_outb(ahc, DSCOMMAND0, dscommand0);
1047 } else {
1048 if (fast)
1049 devconfig &= ~EXTSCBTIME;
1050 else
1051 devconfig |= EXTSCBTIME;
1052 if (enable)
1053 devconfig &= ~SCBRAMSEL;
1054 else
1055 devconfig |= SCBRAMSEL;
1056 if (large)
1057 devconfig &= ~SCBSIZE32;
1058 else
1059 devconfig |= SCBSIZE32;
1060 }
1061 if (pcheck)
1062 devconfig |= EXTSCBPEN;
1063 else
1064 devconfig &= ~EXTSCBPEN;
1065
1066 ahc_pci_write_config(ahc->dev_softc, DEVCONFIG, devconfig, /*bytes*/4);
1067}
1068
1069/*
1070 * Take a look to see if we have external SRAM.
1071 * We currently do not attempt to use SRAM that is
1072 * shared among multiple controllers.
1073 */
1074static void
1075ahc_probe_ext_scbram(struct ahc_softc *ahc)
1076{
1077 int num_scbs;
1078 int test_num_scbs;
1079 int enable;
1080 int pcheck;
1081 int fast;
1082 int large;
1083
1084 enable = FALSE;
1085 pcheck = FALSE;
1086 fast = FALSE;
1087 large = FALSE;
1088 num_scbs = 0;
1089
1090 if (ahc_ext_scbram_present(ahc) == 0)
1091 goto done;
1092
1093 /*
1094 * Probe for the best parameters to use.
1095 */
1096 ahc_scbram_config(ahc, /*enable*/TRUE, pcheck, fast, large);
1097 num_scbs = ahc_probe_scbs(ahc);
1098 if (num_scbs == 0) {
1099 /* The SRAM wasn't really present. */
1100 goto done;
1101 }
1102 enable = TRUE;
1103
1104 /*
1105 * Clear any outstanding parity error
1106 * and ensure that parity error reporting
1107 * is enabled.
1108 */
1109 ahc_outb(ahc, SEQCTL, 0);
1110 ahc_outb(ahc, CLRINT, CLRPARERR);
1111 ahc_outb(ahc, CLRINT, CLRBRKADRINT);
1112
1113 /* Now see if we can do parity */
1114 ahc_scbram_config(ahc, enable, /*pcheck*/TRUE, fast, large);
1115 num_scbs = ahc_probe_scbs(ahc);
1116 if ((ahc_inb(ahc, INTSTAT) & BRKADRINT) == 0
1117 || (ahc_inb(ahc, ERROR) & MPARERR) == 0)
1118 pcheck = TRUE;
1119
1120 /* Clear any resulting parity error */
1121 ahc_outb(ahc, CLRINT, CLRPARERR);
1122 ahc_outb(ahc, CLRINT, CLRBRKADRINT);
1123
1124 /* Now see if we can do fast timing */
1125 ahc_scbram_config(ahc, enable, pcheck, /*fast*/TRUE, large);
1126 test_num_scbs = ahc_probe_scbs(ahc);
1127 if (test_num_scbs == num_scbs
1128 && ((ahc_inb(ahc, INTSTAT) & BRKADRINT) == 0
1129 || (ahc_inb(ahc, ERROR) & MPARERR) == 0))
1130 fast = TRUE;
1131
1132 /*
1133 * See if we can use large SCBs and still maintain
1134 * the same overall count of SCBs.
1135 */
1136 if ((ahc->features & AHC_LARGE_SCBS) != 0) {
1137 ahc_scbram_config(ahc, enable, pcheck, fast, /*large*/TRUE);
1138 test_num_scbs = ahc_probe_scbs(ahc);
1139 if (test_num_scbs >= num_scbs) {
1140 large = TRUE;
1141 num_scbs = test_num_scbs;
1142 if (num_scbs >= 64) {
1143 /*
1144 * We have enough space to move the
1145 * "busy targets table" into SCB space
1146 * and make it qualify all the way to the
1147 * lun level.
1148 */
1149 ahc->flags |= AHC_SCB_BTT;
1150 }
1151 }
1152 }
1153done:
1154 /*
1155 * Disable parity error reporting until we
1156 * can load instruction ram.
1157 */
1158 ahc_outb(ahc, SEQCTL, PERRORDIS|FAILDIS);
1159 /* Clear any latched parity error */
1160 ahc_outb(ahc, CLRINT, CLRPARERR);
1161 ahc_outb(ahc, CLRINT, CLRBRKADRINT);
1162 if (bootverbose && enable) {
1163 printf("%s: External SRAM, %s access%s, %dbytes/SCB\n",
1164 ahc_name(ahc), fast ? "fast" : "slow",
1165 pcheck ? ", parity checking enabled" : "",
1166 large ? 64 : 32);
1167 }
1168 ahc_scbram_config(ahc, enable, pcheck, fast, large);
1169}
1170
1171/*
1172 * Perform some simple tests that should catch situations where
1173 * our registers are invalidly mapped.
1174 */
1175int
1176ahc_pci_test_register_access(struct ahc_softc *ahc)
1177{
1178 int error;
1179 u_int status1;
1180 uint32_t cmd;
1181 uint8_t hcntrl;
1182
1183 error = EIO;
1184
1185 /*
1186 * Enable PCI error interrupt status, but suppress NMIs
1187 * generated by SERR raised due to target aborts.
1188 */
1189 cmd = ahc_pci_read_config(ahc->dev_softc, PCIR_COMMAND, /*bytes*/2);
1190 ahc_pci_write_config(ahc->dev_softc, PCIR_COMMAND,
1191 cmd & ~PCIM_CMD_SERRESPEN, /*bytes*/2);
1192
1193 /*
1194 * First a simple test to see if any
1195 * registers can be read. Reading
1196 * HCNTRL has no side effects and has
1197 * at least one bit that is guaranteed to
1198 * be zero so it is a good register to
1199 * use for this test.
1200 */
1201 hcntrl = ahc_inb(ahc, HCNTRL);
1202 if (hcntrl == 0xFF)
1203 goto fail;
1204
1205 /*
1206 * Next create a situation where write combining
1207 * or read prefetching could be initiated by the
1208 * CPU or host bridge. Our device does not support
1209 * either, so look for data corruption and/or flagged
1210 * PCI errors. First pause without causing another
1211 * chip reset.
1212 */
1213 hcntrl &= ~CHIPRST;
1214 ahc_outb(ahc, HCNTRL, hcntrl|PAUSE);
1215 while (ahc_is_paused(ahc) == 0)
1216 ;
1217
1218 /* Clear any PCI errors that occurred before our driver attached. */
1219 status1 = ahc_pci_read_config(ahc->dev_softc,
1220 PCIR_STATUS + 1, /*bytes*/1);
1221 ahc_pci_write_config(ahc->dev_softc, PCIR_STATUS + 1,
1222 status1, /*bytes*/1);
1223 ahc_outb(ahc, CLRINT, CLRPARERR);
1224
1225 ahc_outb(ahc, SEQCTL, PERRORDIS);
1226 ahc_outb(ahc, SCBPTR, 0);
1227 ahc_outl(ahc, SCB_BASE, 0x5aa555aa);
1228 if (ahc_inl(ahc, SCB_BASE) != 0x5aa555aa)
1229 goto fail;
1230
1231 status1 = ahc_pci_read_config(ahc->dev_softc,
1232 PCIR_STATUS + 1, /*bytes*/1);
1233 if ((status1 & STA) != 0)
1234 goto fail;
1235
1236 error = 0;
1237
1238fail:
1239 /* Silently clear any latched errors. */
1240 status1 = ahc_pci_read_config(ahc->dev_softc,
1241 PCIR_STATUS + 1, /*bytes*/1);
1242 ahc_pci_write_config(ahc->dev_softc, PCIR_STATUS + 1,
1243 status1, /*bytes*/1);
1244 ahc_outb(ahc, CLRINT, CLRPARERR);
1245 ahc_outb(ahc, SEQCTL, PERRORDIS|FAILDIS);
1246 ahc_pci_write_config(ahc->dev_softc, PCIR_COMMAND, cmd, /*bytes*/2);
1247 return (error);
1248}
1249
1250/*
1251 * Check the external port logic for a serial eeprom
1252 * and termination/cable detection contrls.
1253 */
1254static void
1255check_extport(struct ahc_softc *ahc, u_int *sxfrctl1)
1256{
1257 struct seeprom_descriptor sd;
1258 struct seeprom_config *sc;
1259 int have_seeprom;
1260 int have_autoterm;
1261
1262 sd.sd_ahc = ahc;
1263 sd.sd_control_offset = SEECTL;
1264 sd.sd_status_offset = SEECTL;
1265 sd.sd_dataout_offset = SEECTL;
1266 sc = ahc->seep_config;
1267
1268 /*
1269 * For some multi-channel devices, the c46 is simply too
1270 * small to work. For the other controller types, we can
1271 * get our information from either SEEPROM type. Set the
1272 * type to start our probe with accordingly.
1273 */
1274 if (ahc->flags & AHC_LARGE_SEEPROM)
1275 sd.sd_chip = C56_66;
1276 else
1277 sd.sd_chip = C46;
1278
1279 sd.sd_MS = SEEMS;
1280 sd.sd_RDY = SEERDY;
1281 sd.sd_CS = SEECS;
1282 sd.sd_CK = SEECK;
1283 sd.sd_DO = SEEDO;
1284 sd.sd_DI = SEEDI;
1285
1286 have_seeprom = ahc_acquire_seeprom(ahc, &sd);
1287 if (have_seeprom) {
1288
1289 if (bootverbose)
1290 printf("%s: Reading SEEPROM...", ahc_name(ahc));
1291
1292 for (;;) {
1293 u_int start_addr;
1294
1295 start_addr = 32 * (ahc->channel - 'A');
1296
1297 have_seeprom = ahc_read_seeprom(&sd, (uint16_t *)sc,
1298 start_addr,
1299 sizeof(*sc)/2);
1300
1301 if (have_seeprom)
1302 have_seeprom = ahc_verify_cksum(sc);
1303
1304 if (have_seeprom != 0 || sd.sd_chip == C56_66) {
1305 if (bootverbose) {
1306 if (have_seeprom == 0)
1307 printf ("checksum error\n");
1308 else
1309 printf ("done.\n");
1310 }
1311 break;
1312 }
1313 sd.sd_chip = C56_66;
1314 }
1315 ahc_release_seeprom(&sd);
1316 }
1317
1318 if (!have_seeprom) {
1319 /*
1320 * Pull scratch ram settings and treat them as
1321 * if they are the contents of an seeprom if
1322 * the 'ADPT' signature is found in SCB2.
1323 * We manually compose the data as 16bit values
1324 * to avoid endian issues.
1325 */
1326 ahc_outb(ahc, SCBPTR, 2);
1327 if (ahc_inb(ahc, SCB_BASE) == 'A'
1328 && ahc_inb(ahc, SCB_BASE + 1) == 'D'
1329 && ahc_inb(ahc, SCB_BASE + 2) == 'P'
1330 && ahc_inb(ahc, SCB_BASE + 3) == 'T') {
1331 uint16_t *sc_data;
1332 int i;
1333
1334 sc_data = (uint16_t *)sc;
1335 for (i = 0; i < 32; i++, sc_data++) {
1336 int j;
1337
1338 j = i * 2;
1339 *sc_data = ahc_inb(ahc, SRAM_BASE + j)
1340 | ahc_inb(ahc, SRAM_BASE + j + 1) << 8;
1341 }
1342 have_seeprom = ahc_verify_cksum(sc);
1343 if (have_seeprom)
1344 ahc->flags |= AHC_SCB_CONFIG_USED;
1345 }
1346 /*
1347 * Clear any SCB parity errors in case this data and
1348 * its associated parity was not initialized by the BIOS
1349 */
1350 ahc_outb(ahc, CLRINT, CLRPARERR);
1351 ahc_outb(ahc, CLRINT, CLRBRKADRINT);
1352 }
1353
1354 if (!have_seeprom) {
1355 if (bootverbose)
1356 printf("%s: No SEEPROM available.\n", ahc_name(ahc));
1357 ahc->flags |= AHC_USEDEFAULTS;
1358 free(ahc->seep_config, M_DEVBUF);
1359 ahc->seep_config = NULL;
1360 sc = NULL;
1361 } else {
1362 ahc_parse_pci_eeprom(ahc, sc);
1363 }
1364
1365 /*
1366 * Cards that have the external logic necessary to talk to
1367 * a SEEPROM, are almost certain to have the remaining logic
1368 * necessary for auto-termination control. This assumption
1369 * hasn't failed yet...
1370 */
1371 have_autoterm = have_seeprom;
1372
1373 /*
1374 * Some low-cost chips have SEEPROM and auto-term control built
1375 * in, instead of using a GAL. They can tell us directly
1376 * if the termination logic is enabled.
1377 */
1378 if ((ahc->features & AHC_SPIOCAP) != 0) {
1379 if ((ahc_inb(ahc, SPIOCAP) & SSPIOCPS) == 0)
1380 have_autoterm = FALSE;
1381 }
1382
1383 if (have_autoterm) {
1384 ahc->flags |= AHC_HAS_TERM_LOGIC;
1385 ahc_acquire_seeprom(ahc, &sd);
1386 configure_termination(ahc, &sd, sc->adapter_control, sxfrctl1);
1387 ahc_release_seeprom(&sd);
1388 } else if (have_seeprom) {
1389 *sxfrctl1 &= ~STPWEN;
1390 if ((sc->adapter_control & CFSTERM) != 0)
1391 *sxfrctl1 |= STPWEN;
1392 if (bootverbose)
1393 printf("%s: Low byte termination %sabled\n",
1394 ahc_name(ahc),
1395 (*sxfrctl1 & STPWEN) ? "en" : "dis");
1396 }
1397}
1398
1399static void
1400ahc_parse_pci_eeprom(struct ahc_softc *ahc, struct seeprom_config *sc)
1401{
1402 /*
1403 * Put the data we've collected down into SRAM
1404 * where ahc_init will find it.
1405 */
1406 int i;
1407 int max_targ = sc->max_targets & CFMAXTARG;
1408 u_int scsi_conf;
1409 uint16_t discenable;
1410 uint16_t ultraenb;
1411
1412 discenable = 0;
1413 ultraenb = 0;
1414 if ((sc->adapter_control & CFULTRAEN) != 0) {
1415 /*
1416 * Determine if this adapter has a "newstyle"
1417 * SEEPROM format.
1418 */
1419 for (i = 0; i < max_targ; i++) {
1420 if ((sc->device_flags[i] & CFSYNCHISULTRA) != 0) {
1421 ahc->flags |= AHC_NEWEEPROM_FMT;
1422 break;
1423 }
1424 }
1425 }
1426
1427 for (i = 0; i < max_targ; i++) {
1428 u_int scsirate;
1429 uint16_t target_mask;
1430
1431 target_mask = 0x01 << i;
1432 if (sc->device_flags[i] & CFDISC)
1433 discenable |= target_mask;
1434 if ((ahc->flags & AHC_NEWEEPROM_FMT) != 0) {
1435 if ((sc->device_flags[i] & CFSYNCHISULTRA) != 0)
1436 ultraenb |= target_mask;
1437 } else if ((sc->adapter_control & CFULTRAEN) != 0) {
1438 ultraenb |= target_mask;
1439 }
1440 if ((sc->device_flags[i] & CFXFER) == 0x04
1441 && (ultraenb & target_mask) != 0) {
1442 /* Treat 10MHz as a non-ultra speed */
1443 sc->device_flags[i] &= ~CFXFER;
1444 ultraenb &= ~target_mask;
1445 }
1446 if ((ahc->features & AHC_ULTRA2) != 0) {
1447 u_int offset;
1448
1449 if (sc->device_flags[i] & CFSYNCH)
1450 offset = MAX_OFFSET_ULTRA2;
1451 else
1452 offset = 0;
1453 ahc_outb(ahc, TARG_OFFSET + i, offset);
1454
1455 /*
1456 * The ultra enable bits contain the
1457 * high bit of the ultra2 sync rate
1458 * field.
1459 */
1460 scsirate = (sc->device_flags[i] & CFXFER)
1461 | ((ultraenb & target_mask) ? 0x8 : 0x0);
1462 if (sc->device_flags[i] & CFWIDEB)
1463 scsirate |= WIDEXFER;
1464 } else {
1465 scsirate = (sc->device_flags[i] & CFXFER) << 4;
1466 if (sc->device_flags[i] & CFSYNCH)
1467 scsirate |= SOFS;
1468 if (sc->device_flags[i] & CFWIDEB)
1469 scsirate |= WIDEXFER;
1470 }
1471 ahc_outb(ahc, TARG_SCSIRATE + i, scsirate);
1472 }
1473 ahc->our_id = sc->brtime_id & CFSCSIID;
1474
1475 scsi_conf = (ahc->our_id & 0x7);
1476 if (sc->adapter_control & CFSPARITY)
1477 scsi_conf |= ENSPCHK;
1478 if (sc->adapter_control & CFRESETB)
1479 scsi_conf |= RESET_SCSI;
1480
1481 ahc->flags |= (sc->adapter_control & CFBOOTCHAN) >> CFBOOTCHANSHIFT;
1482
1483 if (sc->bios_control & CFEXTEND)
1484 ahc->flags |= AHC_EXTENDED_TRANS_A;
1485
1486 if (sc->bios_control & CFBIOSEN)
1487 ahc->flags |= AHC_BIOS_ENABLED;
1488 if (ahc->features & AHC_ULTRA
1489 && (ahc->flags & AHC_NEWEEPROM_FMT) == 0) {
1490 /* Should we enable Ultra mode? */
1491 if (!(sc->adapter_control & CFULTRAEN))
1492 /* Treat us as a non-ultra card */
1493 ultraenb = 0;
1494 }
1495
1496 if (sc->signature == CFSIGNATURE
1497 || sc->signature == CFSIGNATURE2) {
1498 uint32_t devconfig;
1499
1500 /* Honor the STPWLEVEL settings */
1501 devconfig = ahc_pci_read_config(ahc->dev_softc,
1502 DEVCONFIG, /*bytes*/4);
1503 devconfig &= ~STPWLEVEL;
1504 if ((sc->bios_control & CFSTPWLEVEL) != 0)
1505 devconfig |= STPWLEVEL;
1506 ahc_pci_write_config(ahc->dev_softc, DEVCONFIG,
1507 devconfig, /*bytes*/4);
1508 }
1509 /* Set SCSICONF info */
1510 ahc_outb(ahc, SCSICONF, scsi_conf);
1511 ahc_outb(ahc, DISC_DSB, ~(discenable & 0xff));
1512 ahc_outb(ahc, DISC_DSB + 1, ~((discenable >> 8) & 0xff));
1513 ahc_outb(ahc, ULTRA_ENB, ultraenb & 0xff);
1514 ahc_outb(ahc, ULTRA_ENB + 1, (ultraenb >> 8) & 0xff);
1515}
1516
1517static void
1518configure_termination(struct ahc_softc *ahc,
1519 struct seeprom_descriptor *sd,
1520 u_int adapter_control,
1521 u_int *sxfrctl1)
1522{
1523 uint8_t brddat;
1524
1525 brddat = 0;
1526
1527 /*
1528 * Update the settings in sxfrctl1 to match the
1529 * termination settings
1530 */
1531 *sxfrctl1 = 0;
1532
1533 /*
1534 * SEECS must be on for the GALS to latch
1535 * the data properly. Be sure to leave MS
1536 * on or we will release the seeprom.
1537 */
1538 SEEPROM_OUTB(sd, sd->sd_MS | sd->sd_CS);
1539 if ((adapter_control & CFAUTOTERM) != 0
1540 || (ahc->features & AHC_NEW_TERMCTL) != 0) {
1541 int internal50_present;
1542 int internal68_present;
1543 int externalcable_present;
1544 int eeprom_present;
1545 int enableSEC_low;
1546 int enableSEC_high;
1547 int enablePRI_low;
1548 int enablePRI_high;
1549 int sum;
1550
1551 enableSEC_low = 0;
1552 enableSEC_high = 0;
1553 enablePRI_low = 0;
1554 enablePRI_high = 0;
1555 if ((ahc->features & AHC_NEW_TERMCTL) != 0) {
1556 ahc_new_term_detect(ahc, &enableSEC_low,
1557 &enableSEC_high,
1558 &enablePRI_low,
1559 &enablePRI_high,
1560 &eeprom_present);
1561 if ((adapter_control & CFSEAUTOTERM) == 0) {
1562 if (bootverbose)
1563 printf("%s: Manual SE Termination\n",
1564 ahc_name(ahc));
1565 enableSEC_low = (adapter_control & CFSELOWTERM);
1566 enableSEC_high =
1567 (adapter_control & CFSEHIGHTERM);
1568 }
1569 if ((adapter_control & CFAUTOTERM) == 0) {
1570 if (bootverbose)
1571 printf("%s: Manual LVD Termination\n",
1572 ahc_name(ahc));
1573 enablePRI_low = (adapter_control & CFSTERM);
1574 enablePRI_high = (adapter_control & CFWSTERM);
1575 }
1576 /* Make the table calculations below happy */
1577 internal50_present = 0;
1578 internal68_present = 1;
1579 externalcable_present = 1;
1580 } else if ((ahc->features & AHC_SPIOCAP) != 0) {
1581 aic785X_cable_detect(ahc, &internal50_present,
1582 &externalcable_present,
1583 &eeprom_present);
1584 /* Can never support a wide connector. */
1585 internal68_present = 0;
1586 } else {
1587 aic787X_cable_detect(ahc, &internal50_present,
1588 &internal68_present,
1589 &externalcable_present,
1590 &eeprom_present);
1591 }
1592
1593 if ((ahc->features & AHC_WIDE) == 0)
1594 internal68_present = 0;
1595
1596 if (bootverbose
1597 && (ahc->features & AHC_ULTRA2) == 0) {
1598 printf("%s: internal 50 cable %s present",
1599 ahc_name(ahc),
1600 internal50_present ? "is":"not");
1601
1602 if ((ahc->features & AHC_WIDE) != 0)
1603 printf(", internal 68 cable %s present",
1604 internal68_present ? "is":"not");
1605 printf("\n%s: external cable %s present\n",
1606 ahc_name(ahc),
1607 externalcable_present ? "is":"not");
1608 }
1609 if (bootverbose)
1610 printf("%s: BIOS eeprom %s present\n",
1611 ahc_name(ahc), eeprom_present ? "is" : "not");
1612
1613 if ((ahc->flags & AHC_INT50_SPEEDFLEX) != 0) {
1614 /*
1615 * The 50 pin connector is a separate bus,
1616 * so force it to always be terminated.
1617 * In the future, perform current sensing
1618 * to determine if we are in the middle of
1619 * a properly terminated bus.
1620 */
1621 internal50_present = 0;
1622 }
1623
1624 /*
1625 * Now set the termination based on what
1626 * we found.
1627 * Flash Enable = BRDDAT7
1628 * Secondary High Term Enable = BRDDAT6
1629 * Secondary Low Term Enable = BRDDAT5 (7890)
1630 * Primary High Term Enable = BRDDAT4 (7890)
1631 */
1632 if ((ahc->features & AHC_ULTRA2) == 0
1633 && (internal50_present != 0)
1634 && (internal68_present != 0)
1635 && (externalcable_present != 0)) {
1636 printf("%s: Illegal cable configuration!!. "
1637 "Only two connectors on the "
1638 "adapter may be used at a "
1639 "time!\n", ahc_name(ahc));
1640
1641 /*
1642 * Pretend there are no cables in the hope
1643 * that having all of the termination on
1644 * gives us a more stable bus.
1645 */
1646 internal50_present = 0;
1647 internal68_present = 0;
1648 externalcable_present = 0;
1649 }
1650
1651 if ((ahc->features & AHC_WIDE) != 0
1652 && ((externalcable_present == 0)
1653 || (internal68_present == 0)
1654 || (enableSEC_high != 0))) {
1655 brddat |= BRDDAT6;
1656 if (bootverbose) {
1657 if ((ahc->flags & AHC_INT50_SPEEDFLEX) != 0)
1658 printf("%s: 68 pin termination "
1659 "Enabled\n", ahc_name(ahc));
1660 else
1661 printf("%s: %sHigh byte termination "
1662 "Enabled\n", ahc_name(ahc),
1663 enableSEC_high ? "Secondary "
1664 : "");
1665 }
1666 }
1667
1668 sum = internal50_present + internal68_present
1669 + externalcable_present;
1670 if (sum < 2 || (enableSEC_low != 0)) {
1671 if ((ahc->features & AHC_ULTRA2) != 0)
1672 brddat |= BRDDAT5;
1673 else
1674 *sxfrctl1 |= STPWEN;
1675 if (bootverbose) {
1676 if ((ahc->flags & AHC_INT50_SPEEDFLEX) != 0)
1677 printf("%s: 50 pin termination "
1678 "Enabled\n", ahc_name(ahc));
1679 else
1680 printf("%s: %sLow byte termination "
1681 "Enabled\n", ahc_name(ahc),
1682 enableSEC_low ? "Secondary "
1683 : "");
1684 }
1685 }
1686
1687 if (enablePRI_low != 0) {
1688 *sxfrctl1 |= STPWEN;
1689 if (bootverbose)
1690 printf("%s: Primary Low Byte termination "
1691 "Enabled\n", ahc_name(ahc));
1692 }
1693
1694 /*
1695 * Setup STPWEN before setting up the rest of
1696 * the termination per the tech note on the U160 cards.
1697 */
1698 ahc_outb(ahc, SXFRCTL1, *sxfrctl1);
1699
1700 if (enablePRI_high != 0) {
1701 brddat |= BRDDAT4;
1702 if (bootverbose)
1703 printf("%s: Primary High Byte "
1704 "termination Enabled\n",
1705 ahc_name(ahc));
1706 }
1707
1708 write_brdctl(ahc, brddat);
1709
1710 } else {
1711 if ((adapter_control & CFSTERM) != 0) {
1712 *sxfrctl1 |= STPWEN;
1713
1714 if (bootverbose)
1715 printf("%s: %sLow byte termination Enabled\n",
1716 ahc_name(ahc),
1717 (ahc->features & AHC_ULTRA2) ? "Primary "
1718 : "");
1719 }
1720
1721 if ((adapter_control & CFWSTERM) != 0
1722 && (ahc->features & AHC_WIDE) != 0) {
1723 brddat |= BRDDAT6;
1724 if (bootverbose)
1725 printf("%s: %sHigh byte termination Enabled\n",
1726 ahc_name(ahc),
1727 (ahc->features & AHC_ULTRA2)
1728 ? "Secondary " : "");
1729 }
1730
1731 /*
1732 * Setup STPWEN before setting up the rest of
1733 * the termination per the tech note on the U160 cards.
1734 */
1735 ahc_outb(ahc, SXFRCTL1, *sxfrctl1);
1736
1737 if ((ahc->features & AHC_WIDE) != 0)
1738 write_brdctl(ahc, brddat);
1739 }
1740 SEEPROM_OUTB(sd, sd->sd_MS); /* Clear CS */
1741}
1742
1743static void
1744ahc_new_term_detect(struct ahc_softc *ahc, int *enableSEC_low,
1745 int *enableSEC_high, int *enablePRI_low,
1746 int *enablePRI_high, int *eeprom_present)
1747{
1748 uint8_t brdctl;
1749
1750 /*
1751 * BRDDAT7 = Eeprom
1752 * BRDDAT6 = Enable Secondary High Byte termination
1753 * BRDDAT5 = Enable Secondary Low Byte termination
1754 * BRDDAT4 = Enable Primary high byte termination
1755 * BRDDAT3 = Enable Primary low byte termination
1756 */
1757 brdctl = read_brdctl(ahc);
1758 *eeprom_present = brdctl & BRDDAT7;
1759 *enableSEC_high = (brdctl & BRDDAT6);
1760 *enableSEC_low = (brdctl & BRDDAT5);
1761 *enablePRI_high = (brdctl & BRDDAT4);
1762 *enablePRI_low = (brdctl & BRDDAT3);
1763}
1764
1765static void
1766aic787X_cable_detect(struct ahc_softc *ahc, int *internal50_present,
1767 int *internal68_present, int *externalcable_present,
1768 int *eeprom_present)
1769{
1770 uint8_t brdctl;
1771
1772 /*
1773 * First read the status of our cables.
1774 * Set the rom bank to 0 since the
1775 * bank setting serves as a multiplexor
1776 * for the cable detection logic.
1777 * BRDDAT5 controls the bank switch.
1778 */
1779 write_brdctl(ahc, 0);
1780
1781 /*
1782 * Now read the state of the internal
1783 * connectors. BRDDAT6 is INT50 and
1784 * BRDDAT7 is INT68.
1785 */
1786 brdctl = read_brdctl(ahc);
1787 *internal50_present = (brdctl & BRDDAT6) ? 0 : 1;
1788 *internal68_present = (brdctl & BRDDAT7) ? 0 : 1;
1789
1790 /*
1791 * Set the rom bank to 1 and determine
1792 * the other signals.
1793 */
1794 write_brdctl(ahc, BRDDAT5);
1795
1796 /*
1797 * Now read the state of the external
1798 * connectors. BRDDAT6 is EXT68 and
1799 * BRDDAT7 is EPROMPS.
1800 */
1801 brdctl = read_brdctl(ahc);
1802 *externalcable_present = (brdctl & BRDDAT6) ? 0 : 1;
1803 *eeprom_present = (brdctl & BRDDAT7) ? 1 : 0;
1804}
1805
1806static void
1807aic785X_cable_detect(struct ahc_softc *ahc, int *internal50_present,
1808 int *externalcable_present, int *eeprom_present)
1809{
1810 uint8_t brdctl;
1811 uint8_t spiocap;
1812
1813 spiocap = ahc_inb(ahc, SPIOCAP);
1814 spiocap &= ~SOFTCMDEN;
1815 spiocap |= EXT_BRDCTL;
1816 ahc_outb(ahc, SPIOCAP, spiocap);
1817 ahc_outb(ahc, BRDCTL, BRDRW|BRDCS);
1818 ahc_flush_device_writes(ahc);
1819 ahc_delay(500);
1820 ahc_outb(ahc, BRDCTL, 0);
1821 ahc_flush_device_writes(ahc);
1822 ahc_delay(500);
1823 brdctl = ahc_inb(ahc, BRDCTL);
1824 *internal50_present = (brdctl & BRDDAT5) ? 0 : 1;
1825 *externalcable_present = (brdctl & BRDDAT6) ? 0 : 1;
1826 *eeprom_present = (ahc_inb(ahc, SPIOCAP) & EEPROM) ? 1 : 0;
1827}
1828
1829int
1830ahc_acquire_seeprom(struct ahc_softc *ahc, struct seeprom_descriptor *sd)
1831{
1832 int wait;
1833
1834 if ((ahc->features & AHC_SPIOCAP) != 0
1835 && (ahc_inb(ahc, SPIOCAP) & SEEPROM) == 0)
1836 return (0);
1837
1838 /*
1839 * Request access of the memory port. When access is
1840 * granted, SEERDY will go high. We use a 1 second
1841 * timeout which should be near 1 second more than
1842 * is needed. Reason: after the chip reset, there
1843 * should be no contention.
1844 */
1845 SEEPROM_OUTB(sd, sd->sd_MS);
1846 wait = 1000; /* 1 second timeout in msec */
1847 while (--wait && ((SEEPROM_STATUS_INB(sd) & sd->sd_RDY) == 0)) {
1848 ahc_delay(1000); /* delay 1 msec */
1849 }
1850 if ((SEEPROM_STATUS_INB(sd) & sd->sd_RDY) == 0) {
1851 SEEPROM_OUTB(sd, 0);
1852 return (0);
1853 }
1854 return(1);
1855}
1856
1857void
1858ahc_release_seeprom(struct seeprom_descriptor *sd)
1859{
1860 /* Release access to the memory port and the serial EEPROM. */
1861 SEEPROM_OUTB(sd, 0);
1862}
1863
1864static void
1865write_brdctl(struct ahc_softc *ahc, uint8_t value)
1866{
1867 uint8_t brdctl;
1868
1869 if ((ahc->chip & AHC_CHIPID_MASK) == AHC_AIC7895) {
1870 brdctl = BRDSTB;
1871 if (ahc->channel == 'B')
1872 brdctl |= BRDCS;
1873 } else if ((ahc->features & AHC_ULTRA2) != 0) {
1874 brdctl = 0;
1875 } else {
1876 brdctl = BRDSTB|BRDCS;
1877 }
1878 ahc_outb(ahc, BRDCTL, brdctl);
1879 ahc_flush_device_writes(ahc);
1880 brdctl |= value;
1881 ahc_outb(ahc, BRDCTL, brdctl);
1882 ahc_flush_device_writes(ahc);
1883 if ((ahc->features & AHC_ULTRA2) != 0)
1884 brdctl |= BRDSTB_ULTRA2;
1885 else
1886 brdctl &= ~BRDSTB;
1887 ahc_outb(ahc, BRDCTL, brdctl);
1888 ahc_flush_device_writes(ahc);
1889 if ((ahc->features & AHC_ULTRA2) != 0)
1890 brdctl = 0;
1891 else
1892 brdctl &= ~BRDCS;
1893 ahc_outb(ahc, BRDCTL, brdctl);
1894}
1895
1896static uint8_t
1897read_brdctl(struct ahc_softc *ahc)
1898{
1899 uint8_t brdctl;
1900 uint8_t value;
1901
1902 if ((ahc->chip & AHC_CHIPID_MASK) == AHC_AIC7895) {
1903 brdctl = BRDRW;
1904 if (ahc->channel == 'B')
1905 brdctl |= BRDCS;
1906 } else if ((ahc->features & AHC_ULTRA2) != 0) {
1907 brdctl = BRDRW_ULTRA2;
1908 } else {
1909 brdctl = BRDRW|BRDCS;
1910 }
1911 ahc_outb(ahc, BRDCTL, brdctl);
1912 ahc_flush_device_writes(ahc);
1913 value = ahc_inb(ahc, BRDCTL);
1914 ahc_outb(ahc, BRDCTL, 0);
1915 return (value);
1916}
1917
1918static void
1919ahc_pci_intr(struct ahc_softc *ahc)
1920{
1921 u_int error;
1922 u_int status1;
1923
1924 error = ahc_inb(ahc, ERROR);
1925 if ((error & PCIERRSTAT) == 0)
1926 return;
1927
1928 status1 = ahc_pci_read_config(ahc->dev_softc,
1929 PCIR_STATUS + 1, /*bytes*/1);
1930
1931 printf("%s: PCI error Interrupt at seqaddr = 0x%x\n",
1932 ahc_name(ahc),
1933 ahc_inb(ahc, SEQADDR0) | (ahc_inb(ahc, SEQADDR1) << 8));
1934
1935 if (status1 & DPE) {
1936 ahc->pci_target_perr_count++;
1937 printf("%s: Data Parity Error Detected during address "
1938 "or write data phase\n", ahc_name(ahc));
1939 }
1940 if (status1 & SSE) {
1941 printf("%s: Signal System Error Detected\n", ahc_name(ahc));
1942 }
1943 if (status1 & RMA) {
1944 printf("%s: Received a Master Abort\n", ahc_name(ahc));
1945 }
1946 if (status1 & RTA) {
1947 printf("%s: Received a Target Abort\n", ahc_name(ahc));
1948 }
1949 if (status1 & STA) {
1950 printf("%s: Signaled a Target Abort\n", ahc_name(ahc));
1951 }
1952 if (status1 & DPR) {
1953 printf("%s: Data Parity Error has been reported via PERR#\n",
1954 ahc_name(ahc));
1955 }
1956
1957 /* Clear latched errors. */
1958 ahc_pci_write_config(ahc->dev_softc, PCIR_STATUS + 1,
1959 status1, /*bytes*/1);
1960
1961 if ((status1 & (DPE|SSE|RMA|RTA|STA|DPR)) == 0) {
1962 printf("%s: Latched PCIERR interrupt with "
1963 "no status bits set\n", ahc_name(ahc));
1964 } else {
1965 ahc_outb(ahc, CLRINT, CLRPARERR);
1966 }
1967
1968 if (ahc->pci_target_perr_count > AHC_PCI_TARGET_PERR_THRESH) {
1969 printf(
1970"%s: WARNING WARNING WARNING WARNING\n"
1971"%s: Too many PCI parity errors observed as a target.\n"
1972"%s: Some device on this bus is generating bad parity.\n"
1973"%s: This is an error *observed by*, not *generated by*, this controller.\n"
1974"%s: PCI parity error checking has been disabled.\n"
1975"%s: WARNING WARNING WARNING WARNING\n",
1976 ahc_name(ahc), ahc_name(ahc), ahc_name(ahc),
1977 ahc_name(ahc), ahc_name(ahc), ahc_name(ahc));
1978 ahc->seqctl |= FAILDIS;
1979 ahc_outb(ahc, SEQCTL, ahc->seqctl);
1980 }
1981 ahc_unpause(ahc);
1982}
1983
1984static int
1985ahc_pci_chip_init(struct ahc_softc *ahc)
1986{
1987 ahc_outb(ahc, DSCOMMAND0, ahc->bus_softc.pci_softc.dscommand0);
1988 ahc_outb(ahc, DSPCISTATUS, ahc->bus_softc.pci_softc.dspcistatus);
1989 if ((ahc->features & AHC_DT) != 0) {
1990 u_int sfunct;
1991
1992 sfunct = ahc_inb(ahc, SFUNCT) & ~ALT_MODE;
1993 ahc_outb(ahc, SFUNCT, sfunct | ALT_MODE);
1994 ahc_outb(ahc, OPTIONMODE, ahc->bus_softc.pci_softc.optionmode);
1995 ahc_outw(ahc, TARGCRCCNT, ahc->bus_softc.pci_softc.targcrccnt);
1996 ahc_outb(ahc, SFUNCT, sfunct);
1997 ahc_outb(ahc, CRCCONTROL1,
1998 ahc->bus_softc.pci_softc.crccontrol1);
1999 }
2000 if ((ahc->features & AHC_MULTI_FUNC) != 0)
2001 ahc_outb(ahc, SCBBADDR, ahc->bus_softc.pci_softc.scbbaddr);
2002
2003 if ((ahc->features & AHC_ULTRA2) != 0)
2004 ahc_outb(ahc, DFF_THRSH, ahc->bus_softc.pci_softc.dff_thrsh);
2005
2006 return (ahc_chip_init(ahc));
2007}
2008
2009static int
2010ahc_pci_suspend(struct ahc_softc *ahc)
2011{
2012 return (ahc_suspend(ahc));
2013}
2014
2015static int
2016ahc_pci_resume(struct ahc_softc *ahc)
2017{
2018
2019 pci_set_power_state(ahc->dev_softc, AHC_POWER_STATE_D0);
2020
2021 /*
2022 * We assume that the OS has restored our register
2023 * mappings, etc. Just update the config space registers
2024 * that the OS doesn't know about and rely on our chip
2025 * reset handler to handle the rest.
2026 */
2027 ahc_pci_write_config(ahc->dev_softc, DEVCONFIG, /*bytes*/4,
2028 ahc->bus_softc.pci_softc.devconfig);
2029 ahc_pci_write_config(ahc->dev_softc, PCIR_COMMAND, /*bytes*/1,
2030 ahc->bus_softc.pci_softc.command);
2031 ahc_pci_write_config(ahc->dev_softc, CSIZE_LATTIME, /*bytes*/1,
2032 ahc->bus_softc.pci_softc.csize_lattime);
2033 if ((ahc->flags & AHC_HAS_TERM_LOGIC) != 0) {
2034 struct seeprom_descriptor sd;
2035 u_int sxfrctl1;
2036
2037 sd.sd_ahc = ahc;
2038 sd.sd_control_offset = SEECTL;
2039 sd.sd_status_offset = SEECTL;
2040 sd.sd_dataout_offset = SEECTL;
2041
2042 ahc_acquire_seeprom(ahc, &sd);
2043 configure_termination(ahc, &sd,
2044 ahc->seep_config->adapter_control,
2045 &sxfrctl1);
2046 ahc_release_seeprom(&sd);
2047 }
2048 return (ahc_resume(ahc));
2049}
2050
2051static int
2052ahc_aic785X_setup(struct ahc_softc *ahc)
2053{
2054 ahc_dev_softc_t pci;
2055 uint8_t rev;
2056
2057 pci = ahc->dev_softc;
2058 ahc->channel = 'A';
2059 ahc->chip = AHC_AIC7850;
2060 ahc->features = AHC_AIC7850_FE;
2061 ahc->bugs |= AHC_TMODE_WIDEODD_BUG|AHC_CACHETHEN_BUG|AHC_PCI_MWI_BUG;
2062 rev = ahc_pci_read_config(pci, PCIR_REVID, /*bytes*/1);
2063 if (rev >= 1)
2064 ahc->bugs |= AHC_PCI_2_1_RETRY_BUG;
2065 ahc->instruction_ram_size = 512;
2066 return (0);
2067}
2068
2069static int
2070ahc_aic7860_setup(struct ahc_softc *ahc)
2071{
2072 ahc_dev_softc_t pci;
2073 uint8_t rev;
2074
2075 pci = ahc->dev_softc;
2076 ahc->channel = 'A';
2077 ahc->chip = AHC_AIC7860;
2078 ahc->features = AHC_AIC7860_FE;
2079 ahc->bugs |= AHC_TMODE_WIDEODD_BUG|AHC_CACHETHEN_BUG|AHC_PCI_MWI_BUG;
2080 rev = ahc_pci_read_config(pci, PCIR_REVID, /*bytes*/1);
2081 if (rev >= 1)
2082 ahc->bugs |= AHC_PCI_2_1_RETRY_BUG;
2083 ahc->instruction_ram_size = 512;
2084 return (0);
2085}
2086
2087static int
2088ahc_apa1480_setup(struct ahc_softc *ahc)
2089{
2090 int error;
2091
2092 error = ahc_aic7860_setup(ahc);
2093 if (error != 0)
2094 return (error);
2095 ahc->features |= AHC_REMOVABLE;
2096 return (0);
2097}
2098
2099static int
2100ahc_aic7870_setup(struct ahc_softc *ahc)
2101{
2102
2103 ahc->channel = 'A';
2104 ahc->chip = AHC_AIC7870;
2105 ahc->features = AHC_AIC7870_FE;
2106 ahc->bugs |= AHC_TMODE_WIDEODD_BUG|AHC_CACHETHEN_BUG|AHC_PCI_MWI_BUG;
2107 ahc->instruction_ram_size = 512;
2108 return (0);
2109}
2110
2111static int
2112ahc_aha394X_setup(struct ahc_softc *ahc)
2113{
2114 int error;
2115
2116 error = ahc_aic7870_setup(ahc);
2117 if (error == 0)
2118 error = ahc_aha394XX_setup(ahc);
2119 return (error);
2120}
2121
2122static int
2123ahc_aha398X_setup(struct ahc_softc *ahc)
2124{
2125 int error;
2126
2127 error = ahc_aic7870_setup(ahc);
2128 if (error == 0)
2129 error = ahc_aha398XX_setup(ahc);
2130 return (error);
2131}
2132
2133static int
2134ahc_aha494X_setup(struct ahc_softc *ahc)
2135{
2136 int error;
2137
2138 error = ahc_aic7870_setup(ahc);
2139 if (error == 0)
2140 error = ahc_aha494XX_setup(ahc);
2141 return (error);
2142}
2143
2144static int
2145ahc_aic7880_setup(struct ahc_softc *ahc)
2146{
2147 ahc_dev_softc_t pci;
2148 uint8_t rev;
2149
2150 pci = ahc->dev_softc;
2151 ahc->channel = 'A';
2152 ahc->chip = AHC_AIC7880;
2153 ahc->features = AHC_AIC7880_FE;
2154 ahc->bugs |= AHC_TMODE_WIDEODD_BUG;
2155 rev = ahc_pci_read_config(pci, PCIR_REVID, /*bytes*/1);
2156 if (rev >= 1) {
2157 ahc->bugs |= AHC_PCI_2_1_RETRY_BUG;
2158 } else {
2159 ahc->bugs |= AHC_CACHETHEN_BUG|AHC_PCI_MWI_BUG;
2160 }
2161 ahc->instruction_ram_size = 512;
2162 return (0);
2163}
2164
2165static int
2166ahc_aha2940Pro_setup(struct ahc_softc *ahc)
2167{
2168
2169 ahc->flags |= AHC_INT50_SPEEDFLEX;
2170 return (ahc_aic7880_setup(ahc));
2171}
2172
2173static int
2174ahc_aha394XU_setup(struct ahc_softc *ahc)
2175{
2176 int error;
2177
2178 error = ahc_aic7880_setup(ahc);
2179 if (error == 0)
2180 error = ahc_aha394XX_setup(ahc);
2181 return (error);
2182}
2183
2184static int
2185ahc_aha398XU_setup(struct ahc_softc *ahc)
2186{
2187 int error;
2188
2189 error = ahc_aic7880_setup(ahc);
2190 if (error == 0)
2191 error = ahc_aha398XX_setup(ahc);
2192 return (error);
2193}
2194
2195static int
2196ahc_aic7890_setup(struct ahc_softc *ahc)
2197{
2198 ahc_dev_softc_t pci;
2199 uint8_t rev;
2200
2201 pci = ahc->dev_softc;
2202 ahc->channel = 'A';
2203 ahc->chip = AHC_AIC7890;
2204 ahc->features = AHC_AIC7890_FE;
2205 ahc->flags |= AHC_NEWEEPROM_FMT;
2206 rev = ahc_pci_read_config(pci, PCIR_REVID, /*bytes*/1);
2207 if (rev == 0)
2208 ahc->bugs |= AHC_AUTOFLUSH_BUG|AHC_CACHETHEN_BUG;
2209 ahc->instruction_ram_size = 768;
2210 return (0);
2211}
2212
2213static int
2214ahc_aic7892_setup(struct ahc_softc *ahc)
2215{
2216
2217 ahc->channel = 'A';
2218 ahc->chip = AHC_AIC7892;
2219 ahc->features = AHC_AIC7892_FE;
2220 ahc->flags |= AHC_NEWEEPROM_FMT;
2221 ahc->bugs |= AHC_SCBCHAN_UPLOAD_BUG;
2222 ahc->instruction_ram_size = 1024;
2223 return (0);
2224}
2225
2226static int
2227ahc_aic7895_setup(struct ahc_softc *ahc)
2228{
2229 ahc_dev_softc_t pci;
2230 uint8_t rev;
2231
2232 pci = ahc->dev_softc;
2233 ahc->channel = ahc_get_pci_function(pci) == 1 ? 'B' : 'A';
2234 /*
2235 * The 'C' revision of the aic7895 has a few additional features.
2236 */
2237 rev = ahc_pci_read_config(pci, PCIR_REVID, /*bytes*/1);
2238 if (rev >= 4) {
2239 ahc->chip = AHC_AIC7895C;
2240 ahc->features = AHC_AIC7895C_FE;
2241 } else {
2242 u_int command;
2243
2244 ahc->chip = AHC_AIC7895;
2245 ahc->features = AHC_AIC7895_FE;
2246
2247 /*
2248 * The BIOS disables the use of MWI transactions
2249 * since it does not have the MWI bug work around
2250 * we have. Disabling MWI reduces performance, so
2251 * turn it on again.
2252 */
2253 command = ahc_pci_read_config(pci, PCIR_COMMAND, /*bytes*/1);
2254 command |= PCIM_CMD_MWRICEN;
2255 ahc_pci_write_config(pci, PCIR_COMMAND, command, /*bytes*/1);
2256 ahc->bugs |= AHC_PCI_MWI_BUG;
2257 }
2258 /*
2259 * XXX Does CACHETHEN really not work??? What about PCI retry?
2260 * on C level chips. Need to test, but for now, play it safe.
2261 */
2262 ahc->bugs |= AHC_TMODE_WIDEODD_BUG|AHC_PCI_2_1_RETRY_BUG
2263 | AHC_CACHETHEN_BUG;
2264
2265#if 0
2266 uint32_t devconfig;
2267
2268 /*
2269 * Cachesize must also be zero due to stray DAC
2270 * problem when sitting behind some bridges.
2271 */
2272 ahc_pci_write_config(pci, CSIZE_LATTIME, 0, /*bytes*/1);
2273 devconfig = ahc_pci_read_config(pci, DEVCONFIG, /*bytes*/1);
2274 devconfig |= MRDCEN;
2275 ahc_pci_write_config(pci, DEVCONFIG, devconfig, /*bytes*/1);
2276#endif
2277 ahc->flags |= AHC_NEWEEPROM_FMT;
2278 ahc->instruction_ram_size = 512;
2279 return (0);
2280}
2281
2282static int
2283ahc_aic7896_setup(struct ahc_softc *ahc)
2284{
2285 ahc_dev_softc_t pci;
2286
2287 pci = ahc->dev_softc;
2288 ahc->channel = ahc_get_pci_function(pci) == 1 ? 'B' : 'A';
2289 ahc->chip = AHC_AIC7896;
2290 ahc->features = AHC_AIC7896_FE;
2291 ahc->flags |= AHC_NEWEEPROM_FMT;
2292 ahc->bugs |= AHC_CACHETHEN_DIS_BUG;
2293 ahc->instruction_ram_size = 768;
2294 return (0);
2295}
2296
2297static int
2298ahc_aic7899_setup(struct ahc_softc *ahc)
2299{
2300 ahc_dev_softc_t pci;
2301
2302 pci = ahc->dev_softc;
2303 ahc->channel = ahc_get_pci_function(pci) == 1 ? 'B' : 'A';
2304 ahc->chip = AHC_AIC7899;
2305 ahc->features = AHC_AIC7899_FE;
2306 ahc->flags |= AHC_NEWEEPROM_FMT;
2307 ahc->bugs |= AHC_SCBCHAN_UPLOAD_BUG;
2308 ahc->instruction_ram_size = 1024;
2309 return (0);
2310}
2311
2312static int
2313ahc_aha29160C_setup(struct ahc_softc *ahc)
2314{
2315 int error;
2316
2317 error = ahc_aic7899_setup(ahc);
2318 if (error != 0)
2319 return (error);
2320 ahc->features |= AHC_REMOVABLE;
2321 return (0);
2322}
2323
2324static int
2325ahc_raid_setup(struct ahc_softc *ahc)
2326{
2327 printf("RAID functionality unsupported\n");
2328 return (ENXIO);
2329}
2330
2331static int
2332ahc_aha394XX_setup(struct ahc_softc *ahc)
2333{
2334 ahc_dev_softc_t pci;
2335
2336 pci = ahc->dev_softc;
2337 switch (ahc_get_pci_slot(pci)) {
2338 case AHC_394X_SLOT_CHANNEL_A:
2339 ahc->channel = 'A';
2340 break;
2341 case AHC_394X_SLOT_CHANNEL_B:
2342 ahc->channel = 'B';
2343 break;
2344 default:
2345 printf("adapter at unexpected slot %d\n"
2346 "unable to map to a channel\n",
2347 ahc_get_pci_slot(pci));
2348 ahc->channel = 'A';
2349 }
2350 return (0);
2351}
2352
2353static int
2354ahc_aha398XX_setup(struct ahc_softc *ahc)
2355{
2356 ahc_dev_softc_t pci;
2357
2358 pci = ahc->dev_softc;
2359 switch (ahc_get_pci_slot(pci)) {
2360 case AHC_398X_SLOT_CHANNEL_A:
2361 ahc->channel = 'A';
2362 break;
2363 case AHC_398X_SLOT_CHANNEL_B:
2364 ahc->channel = 'B';
2365 break;
2366 case AHC_398X_SLOT_CHANNEL_C:
2367 ahc->channel = 'C';
2368 break;
2369 default:
2370 printf("adapter at unexpected slot %d\n"
2371 "unable to map to a channel\n",
2372 ahc_get_pci_slot(pci));
2373 ahc->channel = 'A';
2374 break;
2375 }
2376 ahc->flags |= AHC_LARGE_SEEPROM;
2377 return (0);
2378}
2379
2380static int
2381ahc_aha494XX_setup(struct ahc_softc *ahc)
2382{
2383 ahc_dev_softc_t pci;
2384
2385 pci = ahc->dev_softc;
2386 switch (ahc_get_pci_slot(pci)) {
2387 case AHC_494X_SLOT_CHANNEL_A:
2388 ahc->channel = 'A';
2389 break;
2390 case AHC_494X_SLOT_CHANNEL_B:
2391 ahc->channel = 'B';
2392 break;
2393 case AHC_494X_SLOT_CHANNEL_C:
2394 ahc->channel = 'C';
2395 break;
2396 case AHC_494X_SLOT_CHANNEL_D:
2397 ahc->channel = 'D';
2398 break;
2399 default:
2400 printf("adapter at unexpected slot %d\n"
2401 "unable to map to a channel\n",
2402 ahc_get_pci_slot(pci));
2403 ahc->channel = 'A';
2404 }
2405 ahc->flags |= AHC_LARGE_SEEPROM;
2406 return (0);
2407}