[SCSI] 2.6 aacraid: Variable FIB size (updated patch)

New code from the Adaptec driver.  Performance enhancement for newer
adapters.  I hope that this isn't too big for a single patch.  I believe
that other than the few small cleanups mentioned, that the changes are
all related.

- Added Variable FIB size negotiation for new adapters.
- Added support to maximize scatter gather tables and thus permit
  requests larger than 64KB/each.
- Limit Scatter Gather to 34 elements for ROMB platforms.
- aac_printf is only enabled with AAC_QUIRK_34SG
- Large FIB ioctl support
- some minor cleanup

Passes sparse check.
I have tested it on x86 and ppc64 machines.

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

1 files changed, 23 insertions, 17 deletions

diff --git a/drivers/scsi/aacraid/rx.c b/drivers/scsi/aacraid/rx.c
index d447f45f70d1..1ff25f49fada 100644
--- a/drivers/scsi/aacraid/rx.c
+++ b/drivers/scsi/aacraid/rx.c
@@ -98,7 +98,9 @@ static irqreturn_t aac_rx_intr(int irq, void *dev_id, struct pt_regs *regs)
  *      for its completion.
  */
 
-static int rx_sync_cmd(struct aac_dev *dev, u32 command, u32 p1, u32 *status)
+static int rx_sync_cmd(struct aac_dev *dev, u32 command,
+        u32 p1, u32 p2, u32 p3, u32 p4, u32 p5, u32 p6,
+        u32 *status, u32 * r1, u32 * r2, u32 * r3, u32 * r4)
 {
         unsigned long start;
         int ok;
@@ -107,12 +109,12 @@ static int rx_sync_cmd(struct aac_dev *dev, u32 command, u32 p1, u32 *status)
          */
         rx_writel(dev, InboundMailbox0, command);
         /*
-         *      Write the parameters into Mailboxes 1 - 4
+         *      Write the parameters into Mailboxes 1 - 6
          */
         rx_writel(dev, InboundMailbox1, p1);
-        rx_writel(dev, InboundMailbox2, 0);
-        rx_writel(dev, InboundMailbox3, 0);
-        rx_writel(dev, InboundMailbox4, 0);
+        rx_writel(dev, InboundMailbox2, p2);
+        rx_writel(dev, InboundMailbox3, p3);
+        rx_writel(dev, InboundMailbox4, p4);
         /*
          *      Clear the synch command doorbell to start on a clean slate.
          */
@@ -120,7 +122,7 @@ static int rx_sync_cmd(struct aac_dev *dev, u32 command, u32 p1, u32 *status)
         /*
          *      Disable doorbell interrupts
          */
-        rx_writeb(dev, MUnit.OIMR, dev->OIMR |= 0x04);
+        rx_writeb(dev, MUnit.OIMR, dev->OIMR = 0xff);
         /*
          *      Force the completion of the mask register write before issuing
          *      the interrupt.
@@ -169,6 +171,14 @@ static int rx_sync_cmd(struct aac_dev *dev, u32 command, u32 p1, u32 *status)
          */
         if (status)
                 *status = rx_readl(dev, IndexRegs.Mailbox[0]);
+        if (r1)
+                *r1 = rx_readl(dev, IndexRegs.Mailbox[1]);
+        if (r2)
+                *r2 = rx_readl(dev, IndexRegs.Mailbox[2]);
+        if (r3)
+                *r3 = rx_readl(dev, IndexRegs.Mailbox[3]);
+        if (r4)
+                *r4 = rx_readl(dev, IndexRegs.Mailbox[4]);
         /*
          *      Clear the synch command doorbell.
          */
@@ -190,8 +200,7 @@ static int rx_sync_cmd(struct aac_dev *dev, u32 command, u32 p1, u32 *status)
 
 static void aac_rx_interrupt_adapter(struct aac_dev *dev)
 {
-        u32 ret;
-        rx_sync_cmd(dev, BREAKPOINT_REQUEST, 0, &ret);
+        rx_sync_cmd(dev, BREAKPOINT_REQUEST, 0, 0, 0, 0, 0, 0, NULL, NULL, NULL, NULL, NULL);
 }
 
 /**
@@ -220,7 +229,8 @@ static void aac_rx_notify_adapter(struct aac_dev *dev, u32 event)
                 rx_writel(dev, MUnit.IDR,INBOUNDDOORBELL_3);
                 break;
         case HostShutdown:
-//              rx_sync_cmd(dev, HOST_CRASHING, 0, 0, 0, 0, &ret);
+//              rx_sync_cmd(dev, HOST_CRASHING, 0, 0, 0, 0, 0, 0,
+//                NULL, NULL, NULL, NULL, NULL);
                 break;
         case FastIo:
                 rx_writel(dev, MUnit.IDR,INBOUNDDOORBELL_6);
@@ -243,17 +253,11 @@ static void aac_rx_notify_adapter(struct aac_dev *dev, u32 event)
 
 static void aac_rx_start_adapter(struct aac_dev *dev)
 {
-        u32 status;
         struct aac_init *init;
 
         init = dev->init;
         init->HostElapsedSeconds = cpu_to_le32(get_seconds());
         /*
-         *      Tell the adapter we are back and up and running so it will scan
-         *      its command queues and enable our interrupts
-         */
-        dev->irq_mask = (DoorBellPrintfReady | OUTBOUNDDOORBELL_1 | OUTBOUNDDOORBELL_2 | OUTBOUNDDOORBELL_3 | OUTBOUNDDOORBELL_4);
-        /*
          *      First clear out all interrupts.  Then enable the one's that we
          *      can handle.
          */
@@ -263,7 +267,8 @@ static void aac_rx_start_adapter(struct aac_dev *dev)
         rx_writeb(dev, MUnit.OIMR, dev->OIMR = 0xfb);
 
         // We can only use a 32 bit address here
-        rx_sync_cmd(dev, INIT_STRUCT_BASE_ADDRESS, (u32)(ulong)dev->init_pa, &status);
+        rx_sync_cmd(dev, INIT_STRUCT_BASE_ADDRESS, (u32)(ulong)dev->init_pa,
+          0, 0, 0, 0, 0, NULL, NULL, NULL, NULL, NULL);
 }
 
 /**
@@ -310,7 +315,8 @@ static int aac_rx_check_health(struct aac_dev *dev)
                 post->Post_Command = cpu_to_le32(COMMAND_POST_RESULTS);
                 post->Post_Address = cpu_to_le32(baddr);
                 rx_writel(dev, MUnit.IMRx[0], paddr);
-                rx_sync_cmd(dev, COMMAND_POST_RESULTS, baddr, &status);
+                rx_sync_cmd(dev, COMMAND_POST_RESULTS, baddr, 0, 0, 0, 0, 0,
+                  NULL, NULL, NULL, NULL, NULL);
                 pci_free_consistent(dev->pdev, sizeof(struct POSTSTATUS),
                   post, paddr);
                 if ((buffer[0] == '0') && (buffer[1] == 'x')) {