[SCSI] 3ware 9000 add support for 9650SE

Updates the 3ware 9000 driver:

- Free irq handler in __twa_shutdown().
- Serialize reset code.
- Add support for 9650SE controllers.

Signed-off-by: Adam Radford <linuxraid@amcc.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

1 files changed, 85 insertions, 56 deletions

diff --git a/drivers/scsi/3w-9xxx.c b/drivers/scsi/3w-9xxx.c
index 5f8c26cd66ca..b091a0fc4eb0 100644
--- a/drivers/scsi/3w-9xxx.c
+++ b/drivers/scsi/3w-9xxx.c
@@ -66,6 +66,9 @@
    2.26.02.006 - Fix 9550SX pchip reset timeout.
                  Add big endian support.
    2.26.02.007 - Disable local interrupts during kmap/unmap_atomic().
+   2.26.02.008 - Free irq handler in __twa_shutdown().
+                 Serialize reset code.
+                 Add support for 9650SE controllers.
 */
 
 #include <linux/module.h>
@@ -89,7 +92,7 @@
 #include "3w-9xxx.h"
 
 /* Globals */
-#define TW_DRIVER_VERSION "2.26.02.007"
+#define TW_DRIVER_VERSION "2.26.02.008"
 static TW_Device_Extension *twa_device_extension_list[TW_MAX_SLOT];
 static unsigned int twa_device_extension_count;
 static int twa_major = -1;
@@ -566,9 +569,9 @@ static int twa_check_srl(TW_Device_Extension *tw_dev, int *flashed)
                 goto out;
         }
 
-        tw_dev->working_srl = fw_on_ctlr_srl;
-        tw_dev->working_branch = fw_on_ctlr_branch;
-        tw_dev->working_build = fw_on_ctlr_build;
+        tw_dev->tw_compat_info.working_srl = fw_on_ctlr_srl;
+        tw_dev->tw_compat_info.working_branch = fw_on_ctlr_branch;
+        tw_dev->tw_compat_info.working_build = fw_on_ctlr_build;
 
         /* Try base mode compatibility */
         if (!(init_connect_result & TW_CTLR_FW_COMPATIBLE)) {
@@ -590,10 +593,23 @@ static int twa_check_srl(TW_Device_Extension *tw_dev, int *flashed)
                         }
                         goto out;
                 }
-                tw_dev->working_srl = TW_BASE_FW_SRL;
-                tw_dev->working_branch = TW_BASE_FW_BRANCH;
-                tw_dev->working_build = TW_BASE_FW_BUILD;
-        }
+                tw_dev->tw_compat_info.working_srl = TW_BASE_FW_SRL;
+                tw_dev->tw_compat_info.working_branch = TW_BASE_FW_BRANCH;
+                tw_dev->tw_compat_info.working_build = TW_BASE_FW_BUILD;
+        }
+
+        /* Load rest of compatibility struct */
+        strncpy(tw_dev->tw_compat_info.driver_version, TW_DRIVER_VERSION, strlen(TW_DRIVER_VERSION));
+        tw_dev->tw_compat_info.driver_srl_high = TW_CURRENT_DRIVER_SRL;
+        tw_dev->tw_compat_info.driver_branch_high = TW_CURRENT_DRIVER_BRANCH;
+        tw_dev->tw_compat_info.driver_build_high = TW_CURRENT_DRIVER_BUILD;
+        tw_dev->tw_compat_info.driver_srl_low = TW_BASE_FW_SRL;
+        tw_dev->tw_compat_info.driver_branch_low = TW_BASE_FW_BRANCH;
+        tw_dev->tw_compat_info.driver_build_low = TW_BASE_FW_BUILD;
+        tw_dev->tw_compat_info.fw_on_ctlr_srl = fw_on_ctlr_srl;
+        tw_dev->tw_compat_info.fw_on_ctlr_branch = fw_on_ctlr_branch;
+        tw_dev->tw_compat_info.fw_on_ctlr_build = fw_on_ctlr_build;
+
         retval = 0;
 out:
         return retval;
@@ -631,7 +647,7 @@ static int twa_chrdev_ioctl(struct inode *inode, struct file *file, unsigned int
                 goto out2;
 
         /* Check data buffer size */
-        if (driver_command.buffer_length > TW_MAX_SECTORS * 512) {
+        if (driver_command.buffer_length > TW_MAX_SECTORS * 2048) {
                 retval = TW_IOCTL_ERROR_OS_EINVAL;
                 goto out2;
         }
@@ -680,13 +696,6 @@ static int twa_chrdev_ioctl(struct inode *inode, struct file *file, unsigned int
                 /* Now wait for command to complete */
                 timeout = wait_event_timeout(tw_dev->ioctl_wqueue, tw_dev->chrdev_request_id == TW_IOCTL_CHRDEV_FREE, timeout);
 
-                /* See if we reset while waiting for the ioctl to complete */
-                if (test_bit(TW_IN_RESET, &tw_dev->flags)) {
-                        clear_bit(TW_IN_RESET, &tw_dev->flags);
-                        retval = TW_IOCTL_ERROR_OS_ERESTARTSYS;
-                        goto out3;
-                }
-
                 /* We timed out, and didn't get an interrupt */
                 if (tw_dev->chrdev_request_id != TW_IOCTL_CHRDEV_FREE) {
                         /* Now we need to reset the board */
@@ -694,11 +703,6 @@ static int twa_chrdev_ioctl(struct inode *inode, struct file *file, unsigned int
                                tw_dev->host->host_no, TW_DRIVER, 0xc,
                                cmd);
                         retval = TW_IOCTL_ERROR_OS_EIO;
-                        spin_lock_irqsave(tw_dev->host->host_lock, flags);
-                        tw_dev->state[request_id] = TW_S_COMPLETED;
-                        twa_free_request_id(tw_dev, request_id);
-                        tw_dev->posted_request_count--;
-                        spin_unlock_irqrestore(tw_dev->host->host_lock, flags);
                         twa_reset_device_extension(tw_dev, 1);
                         goto out3;
                 }
@@ -717,16 +721,7 @@ static int twa_chrdev_ioctl(struct inode *inode, struct file *file, unsigned int
                 tw_ioctl->driver_command.status = 0;
                 /* Copy compatiblity struct into ioctl data buffer */
                 tw_compat_info = (TW_Compatibility_Info *)tw_ioctl->data_buffer;
-                strncpy(tw_compat_info->driver_version, TW_DRIVER_VERSION, strlen(TW_DRIVER_VERSION));
-                tw_compat_info->working_srl = tw_dev->working_srl;
-                tw_compat_info->working_branch = tw_dev->working_branch;
-                tw_compat_info->working_build = tw_dev->working_build;
-                tw_compat_info->driver_srl_high = TW_CURRENT_DRIVER_SRL;
-                tw_compat_info->driver_branch_high = TW_CURRENT_DRIVER_BRANCH;
-                tw_compat_info->driver_build_high = TW_CURRENT_DRIVER_BUILD;
-                tw_compat_info->driver_srl_low = TW_BASE_FW_SRL;
-                tw_compat_info->driver_branch_low = TW_BASE_FW_BRANCH;
-                tw_compat_info->driver_build_low = TW_BASE_FW_BUILD;
+                memcpy(tw_compat_info, &tw_dev->tw_compat_info, sizeof(TW_Compatibility_Info));
                 break;
         case TW_IOCTL_GET_LAST_EVENT:
                 if (tw_dev->event_queue_wrapped) {
@@ -895,7 +890,8 @@ static int twa_decode_bits(TW_Device_Extension *tw_dev, u32 status_reg_value)
         }
 
         if (status_reg_value & TW_STATUS_QUEUE_ERROR) {
-                TW_PRINTK(tw_dev->host, TW_DRIVER, 0xe, "Controller Queue Error: clearing");
+                if ((tw_dev->tw_pci_dev->device != PCI_DEVICE_ID_3WARE_9650SE) || (!test_bit(TW_IN_RESET, &tw_dev->flags)))
+                        TW_PRINTK(tw_dev->host, TW_DRIVER, 0xe, "Controller Queue Error: clearing");
                 writel(TW_CONTROL_CLEAR_QUEUE_ERROR, TW_CONTROL_REG_ADDR(tw_dev));
         }
 
@@ -939,10 +935,12 @@ static int twa_empty_response_queue_large(TW_Device_Extension *tw_dev)
         unsigned long before;
         int retval = 1;
 
-        if (tw_dev->tw_pci_dev->device == PCI_DEVICE_ID_3WARE_9550SX) {
+        if ((tw_dev->tw_pci_dev->device == PCI_DEVICE_ID_3WARE_9550SX) ||
+            (tw_dev->tw_pci_dev->device == PCI_DEVICE_ID_3WARE_9650SE)) {
                 before = jiffies;
                 while ((response_que_value & TW_9550SX_DRAIN_COMPLETED) != TW_9550SX_DRAIN_COMPLETED) {
                         response_que_value = readl(TW_RESPONSE_QUEUE_REG_ADDR_LARGE(tw_dev));
+                        msleep(1);
                         if (time_after(jiffies, before + HZ * 30))
                                 goto out;
                 }
@@ -1214,6 +1212,10 @@ static irqreturn_t twa_interrupt(int irq, void *dev_instance)
 
         handled = 1;
 
+        /* If we are resetting, bail */
+        if (test_bit(TW_IN_RESET, &tw_dev->flags))
+                goto twa_interrupt_bail;
+
         /* Check controller for errors */
         if (twa_check_bits(status_reg_value)) {
                 if (twa_decode_bits(tw_dev, status_reg_value)) {
@@ -1355,8 +1357,8 @@ static void twa_load_sgl(TW_Command_Full *full_command_packet, int request_id, d
 
         if (TW_OP_OUT(full_command_packet->command.newcommand.opcode__reserved) == TW_OP_EXECUTE_SCSI) {
                 newcommand = &full_command_packet->command.newcommand;
-                newcommand->request_id__lunl = 
-                        TW_REQ_LUN_IN(TW_LUN_OUT(newcommand->request_id__lunl), request_id);
+                newcommand->request_id__lunl =
+                        cpu_to_le16(TW_REQ_LUN_IN(TW_LUN_OUT(newcommand->request_id__lunl), request_id));
                 newcommand->sg_list[0].address = TW_CPU_TO_SGL(dma_handle + sizeof(TW_Ioctl_Buf_Apache) - 1);
                 newcommand->sg_list[0].length = cpu_to_le32(length);
                 newcommand->sgl_entries__lunh =
@@ -1531,6 +1533,13 @@ static int twa_post_command_packet(TW_Device_Extension *tw_dev, int request_id,
         int retval = 1;
 
         command_que_value = tw_dev->command_packet_phys[request_id];
+
+        /* For 9650SE write low 4 bytes first */
+        if (tw_dev->tw_pci_dev->device == PCI_DEVICE_ID_3WARE_9650SE) {
+                command_que_value += TW_COMMAND_OFFSET;
+                writel((u32)command_que_value, TW_COMMAND_QUEUE_REG_ADDR_LARGE(tw_dev));
+        }
+
         status_reg_value = readl(TW_STATUS_REG_ADDR(tw_dev));
 
         if (twa_check_bits(status_reg_value))
@@ -1557,13 +1566,17 @@ static int twa_post_command_packet(TW_Device_Extension *tw_dev, int request_id,
                 TW_UNMASK_COMMAND_INTERRUPT(tw_dev);
                 goto out;
         } else {
-                /* We successfully posted the command packet */
-                if (sizeof(dma_addr_t) > 4) {
-                        command_que_value += TW_COMMAND_OFFSET;
-                        writel((u32)command_que_value, TW_COMMAND_QUEUE_REG_ADDR(tw_dev));
-                        writel((u32)((u64)command_que_value >> 32), TW_COMMAND_QUEUE_REG_ADDR(tw_dev) + 0x4);
+                if (tw_dev->tw_pci_dev->device == PCI_DEVICE_ID_3WARE_9650SE) {
+                        /* Now write upper 4 bytes */
+                        writel((u32)((u64)command_que_value >> 32), TW_COMMAND_QUEUE_REG_ADDR_LARGE(tw_dev) + 0x4);
                 } else {
-                        writel(TW_COMMAND_OFFSET + command_que_value, TW_COMMAND_QUEUE_REG_ADDR(tw_dev));
+                        if (sizeof(dma_addr_t) > 4) {
+                                command_que_value += TW_COMMAND_OFFSET;
+                                writel((u32)command_que_value, TW_COMMAND_QUEUE_REG_ADDR(tw_dev));
+                                writel((u32)((u64)command_que_value >> 32), TW_COMMAND_QUEUE_REG_ADDR(tw_dev) + 0x4);
+                        } else {
+                                writel(TW_COMMAND_OFFSET + command_que_value, TW_COMMAND_QUEUE_REG_ADDR(tw_dev));
+                        }
                 }
                 tw_dev->state[request_id] = TW_S_POSTED;
                 tw_dev->posted_request_count++;
@@ -1620,14 +1633,9 @@ static int twa_reset_device_extension(TW_Device_Extension *tw_dev, int ioctl_res
                 goto out;
 
         TW_ENABLE_AND_CLEAR_INTERRUPTS(tw_dev);
+        clear_bit(TW_IN_RESET, &tw_dev->flags);
+        tw_dev->chrdev_request_id = TW_IOCTL_CHRDEV_FREE;
 
-        /* Wake up any ioctl that was pending before the reset */
-        if ((tw_dev->chrdev_request_id == TW_IOCTL_CHRDEV_FREE) || (ioctl_reset)) {
-                clear_bit(TW_IN_RESET, &tw_dev->flags);
-        } else {
-                tw_dev->chrdev_request_id = TW_IOCTL_CHRDEV_FREE;
-                wake_up(&tw_dev->ioctl_wqueue);
-        }
         retval = 0;
 out:
         return retval;
@@ -1736,6 +1744,9 @@ static int twa_scsi_eh_reset(struct scsi_cmnd *SCpnt)
                 "WARNING: (0x%02X:0x%04X): Command (0x%x) timed out, resetting card.\n",
                 TW_DRIVER, 0x2c, SCpnt->cmnd[0]);
 
+        /* Make sure we are not issuing an ioctl or resetting from ioctl */
+        mutex_lock(&tw_dev->ioctl_lock);
+
         /* Now reset the card and some of the device extension data */
         if (twa_reset_device_extension(tw_dev, 0)) {
                 TW_PRINTK(tw_dev->host, TW_DRIVER, 0x2b, "Controller reset failed during scsi host reset");
@@ -1744,6 +1755,7 @@ static int twa_scsi_eh_reset(struct scsi_cmnd *SCpnt)
 
         retval = SUCCESS;
 out:
+        mutex_unlock(&tw_dev->ioctl_lock);
         return retval;
 } /* End twa_scsi_eh_reset() */
 
@@ -1753,8 +1765,14 @@ static int twa_scsi_queue(struct scsi_cmnd *SCpnt, void (*done)(struct scsi_cmnd
         int request_id, retval;
         TW_Device_Extension *tw_dev = (TW_Device_Extension *)SCpnt->device->host->hostdata;
 
+        /* If we are resetting due to timed out ioctl, report as busy */
+        if (test_bit(TW_IN_RESET, &tw_dev->flags)) {
+                retval = SCSI_MLQUEUE_HOST_BUSY;
+                goto out;
+        }
+
         /* Check if this FW supports luns */
-        if ((SCpnt->device->lun != 0) && (tw_dev->working_srl < TW_FW_SRL_LUNS_SUPPORTED)) {
+        if ((SCpnt->device->lun != 0) && (tw_dev->tw_compat_info.working_srl < TW_FW_SRL_LUNS_SUPPORTED)) {
                 SCpnt->result = (DID_BAD_TARGET << 16);
                 done(SCpnt);
                 retval = 0;
@@ -1960,6 +1978,9 @@ static void __twa_shutdown(TW_Device_Extension *tw_dev)
         /* Disable interrupts */
         TW_DISABLE_INTERRUPTS(tw_dev);
 
+        /* Free up the IRQ */
+        free_irq(tw_dev->tw_pci_dev->irq, tw_dev);
+
         printk(KERN_WARNING "3w-9xxx: Shutting down host %d.\n", tw_dev->host->host_no);
 
         /* Tell the card we are shutting down */
@@ -2091,21 +2112,25 @@ static int __devinit twa_probe(struct pci_dev *pdev, const struct pci_device_id
 
         /* Initialize the card */
         if (twa_reset_sequence(tw_dev, 0))
-                goto out_release_mem_region;
+                goto out_iounmap;
 
         /* Set host specific parameters */
-        host->max_id = TW_MAX_UNITS;
+        if (pdev->device == PCI_DEVICE_ID_3WARE_9650SE)
+                host->max_id = TW_MAX_UNITS_9650SE;
+        else
+                host->max_id = TW_MAX_UNITS;
+
         host->max_cmd_len = TW_MAX_CDB_LEN;
 
         /* Channels aren't supported by adapter */
-        host->max_lun = TW_MAX_LUNS(tw_dev->working_srl);
+        host->max_lun = TW_MAX_LUNS(tw_dev->tw_compat_info.working_srl);
         host->max_channel = 0;
 
         /* Register the card with the kernel SCSI layer */
         retval = scsi_add_host(host, &pdev->dev);
         if (retval) {
                 TW_PRINTK(tw_dev->host, TW_DRIVER, 0x27, "scsi add host failed");
-                goto out_release_mem_region;
+                goto out_iounmap;
         }
 
         pci_set_drvdata(pdev, host);
@@ -2145,6 +2170,8 @@ static int __devinit twa_probe(struct pci_dev *pdev, const struct pci_device_id
 
 out_remove_host:
         scsi_remove_host(host);
+out_iounmap:
+        iounmap(tw_dev->base_addr);
 out_release_mem_region:
         pci_release_regions(pdev);
 out_free_device_extension:
@@ -2170,12 +2197,12 @@ static void twa_remove(struct pci_dev *pdev)
                 twa_major = -1;
         }
 
-        /* Free up the IRQ */
-        free_irq(tw_dev->tw_pci_dev->irq, tw_dev);
-
         /* Shutdown the card */
         __twa_shutdown(tw_dev);
 
+        /* Free IO remapping */
+        iounmap(tw_dev->base_addr);
+
         /* Free up the mem region */
         pci_release_regions(pdev);
 
@@ -2193,6 +2220,8 @@ static struct pci_device_id twa_pci_tbl[] __devinitdata = {
           PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
         { PCI_VENDOR_ID_3WARE, PCI_DEVICE_ID_3WARE_9550SX,
           PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
+        { PCI_VENDOR_ID_3WARE, PCI_DEVICE_ID_3WARE_9650SE,
+          PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
         { }
 };
 MODULE_DEVICE_TABLE(pci, twa_pci_tbl);