[netdrvr s/390] trim trailing whitespace

Previous fix patches added a bunch of trailing whitespace,
which git-applymbox complained loudly about.

1 files changed, 311 insertions, 311 deletions

diff --git a/drivers/s390/net/iucv.h b/drivers/s390/net/iucv.h
index 0c4644d3d2f3..5b6b1b7241c9 100644
--- a/drivers/s390/net/iucv.h
+++ b/drivers/s390/net/iucv.h
@@ -4,7 +4,7 @@
  *
  *  S390 version
  *    Copyright (C) 2000 IBM Corporation
- *    Author(s):Alan Altmark (Alan_Altmark@us.ibm.com) 
+ *    Author(s):Alan Altmark (Alan_Altmark@us.ibm.com)
  *              Xenia Tkatschow (xenia@us.ibm.com)
  *
  *
@@ -16,17 +16,17 @@
  * CP Programming Services book, also available on the web
  * thru www.ibm.com/s390/vm/pubs, manual # SC24-5760
  *
- *      Definition of Return Codes                                    
- *      -All positive return codes including zero are reflected back  
- *       from CP except for iucv_register_program. The definition of each 
- *       return code can be found in CP Programming Services book.    
- *       Also available on the web thru www.ibm.com/s390/vm/pubs, manual # SC24-5760          
- *      - Return Code of:         
- *             (-EINVAL) Invalid value       
- *             (-ENOMEM) storage allocation failed              
+ *      Definition of Return Codes
+ *      -All positive return codes including zero are reflected back
+ *       from CP except for iucv_register_program. The definition of each
+ *       return code can be found in CP Programming Services book.
+ *       Also available on the web thru www.ibm.com/s390/vm/pubs, manual # SC24-5760
+ *      - Return Code of:
+ *             (-EINVAL) Invalid value
+ *             (-ENOMEM) storage allocation failed
  *      pgmask defined in iucv_register_program will be set depending on input
- *      paramters. 
- *      
+ *      paramters.
+ *
  */
 
 #include <linux/types.h>
@@ -124,13 +124,13 @@ iucv_hex_dump(unsigned char *buf, size_t len)
 #define iucv_handle_t void *
 
 /* flags1:
- * All flags are defined in the field IPFLAGS1 of each function   
- * and can be found in CP Programming Services.                  
- * IPLOCAL  - Indicates the connect can only be satisfied on the 
- *            local system                                       
- * IPPRTY   - Indicates a priority message                       
- * IPQUSCE  - Indicates you do not want to receive messages on a 
- *            path until an iucv_resume is issued                
+ * All flags are defined in the field IPFLAGS1 of each function
+ * and can be found in CP Programming Services.
+ * IPLOCAL  - Indicates the connect can only be satisfied on the
+ *            local system
+ * IPPRTY   - Indicates a priority message
+ * IPQUSCE  - Indicates you do not want to receive messages on a
+ *            path until an iucv_resume is issued
  * IPRMDATA - Indicates that the message is in the parameter list
  */
 #define IPLOCAL         0x01
@@ -154,14 +154,14 @@ iucv_hex_dump(unsigned char *buf, size_t len)
 #define AllInterrupts                                    0xf8
 /*
  * Mapping of external interrupt buffers should be used with the corresponding
- * interrupt types.                  
- * Names: iucv_ConnectionPending    ->  connection pending 
+ * interrupt types.
+ * Names: iucv_ConnectionPending    ->  connection pending
  *        iucv_ConnectionComplete   ->  connection complete
- *        iucv_ConnectionSevered    ->  connection severed 
- *        iucv_ConnectionQuiesced   ->  connection quiesced 
- *        iucv_ConnectionResumed    ->  connection resumed 
- *        iucv_MessagePending       ->  message pending    
- *        iucv_MessageComplete      ->  message complete   
+ *        iucv_ConnectionSevered    ->  connection severed
+ *        iucv_ConnectionQuiesced   ->  connection quiesced
+ *        iucv_ConnectionResumed    ->  connection resumed
+ *        iucv_MessagePending       ->  message pending
+ *        iucv_MessageComplete      ->  message complete
  */
 typedef struct {
         u16 ippathid;
@@ -260,16 +260,16 @@ typedef struct {
         uchar res2[3];
 } iucv_MessageComplete;
 
-/* 
- * iucv_interrupt_ops_t: Is a vector of functions that handle 
- * IUCV interrupts.                                          
- * Parameter list:                                           
- *         eib - is a pointer to a 40-byte area described    
- *               with one of the structures above.           
- *         pgm_data - this data is strictly for the          
- *                    interrupt handler that is passed by    
- *                    the application. This may be an address 
- *                    or token.                              
+/*
+ * iucv_interrupt_ops_t: Is a vector of functions that handle
+ * IUCV interrupts.
+ * Parameter list:
+ *         eib - is a pointer to a 40-byte area described
+ *               with one of the structures above.
+ *         pgm_data - this data is strictly for the
+ *                    interrupt handler that is passed by
+ *                    the application. This may be an address
+ *                    or token.
 */
 typedef struct {
         void (*ConnectionPending) (iucv_ConnectionPending * eib,
@@ -287,8 +287,8 @@ typedef struct {
 } iucv_interrupt_ops_t;
 
 /*
- *iucv_array_t : Defines buffer array.                      
- * Inside the array may be 31- bit addresses and 31-bit lengths. 
+ *iucv_array_t : Defines buffer array.
+ * Inside the array may be 31- bit addresses and 31-bit lengths.
 */
 typedef struct {
         u32 address;
@@ -299,19 +299,19 @@ extern struct bus_type iucv_bus;
 extern struct device *iucv_root;
 
 /*   -prototypes-    */
-/*                                                                
- * Name: iucv_register_program                                    
- * Purpose: Registers an application with IUCV                    
- * Input: prmname - user identification                           
+/*
+ * Name: iucv_register_program
+ * Purpose: Registers an application with IUCV
+ * Input: prmname - user identification
  *        userid  - machine identification
  *        pgmmask - indicates which bits in the prmname and userid combined will be
  *                  used to determine who is given control
- *        ops     - address of vector of interrupt handlers       
- *        pgm_data- application data passed to interrupt handlers 
- * Output: NA                                                     
- * Return: address of handler                                     
+ *        ops     - address of vector of interrupt handlers
+ *        pgm_data- application data passed to interrupt handlers
+ * Output: NA
+ * Return: address of handler
  *         (0) - Error occurred, registration not completed.
- * NOTE: Exact cause of failure will be recorded in syslog.                        
+ * NOTE: Exact cause of failure will be recorded in syslog.
 */
 iucv_handle_t iucv_register_program (uchar pgmname[16],
                                      uchar userid[8],
@@ -319,13 +319,13 @@ iucv_handle_t iucv_register_program (uchar pgmname[16],
                                      iucv_interrupt_ops_t * ops,
                                      void *pgm_data);
 
-/*                                                
- * Name: iucv_unregister_program                  
- * Purpose: Unregister application with IUCV      
- * Input: address of handler                      
- * Output: NA                                     
- * Return: (0) - Normal return                    
- *         (-EINVAL) - Internal error, wild pointer     
+/*
+ * Name: iucv_unregister_program
+ * Purpose: Unregister application with IUCV
+ * Input: address of handler
+ * Output: NA
+ * Return: (0) - Normal return
+ *         (-EINVAL) - Internal error, wild pointer
 */
 int iucv_unregister_program (iucv_handle_t handle);
 
@@ -333,7 +333,7 @@ int iucv_unregister_program (iucv_handle_t handle);
  * Name: iucv_accept
  * Purpose: This function is issued after the user receives a Connection Pending external
  *          interrupt and now wishes to complete the IUCV communication path.
- * Input:  pathid - u16 , Path identification number   
+ * Input:  pathid - u16 , Path identification number
  *         msglim_reqstd - u16, The number of outstanding messages requested.
  *         user_data - uchar[16], Data specified by the iucv_connect function.
  *         flags1 - int, Contains options for this path.
@@ -358,34 +358,34 @@ int iucv_accept (u16 pathid,
                  void *pgm_data, int *flags1_out, u16 * msglim);
 
 /*
- * Name: iucv_connect                                         
+ * Name: iucv_connect
  * Purpose: This function establishes an IUCV path. Although the connect may complete
- *          successfully, you are not able to use the path until you receive an IUCV 
- *          Connection Complete external interrupt.            
- * Input: pathid - u16 *, Path identification number          
- *        msglim_reqstd - u16, Number of outstanding messages requested       
- *        user_data - uchar[16], 16-byte user data                    
+ *          successfully, you are not able to use the path until you receive an IUCV
+ *          Connection Complete external interrupt.
+ * Input: pathid - u16 *, Path identification number
+ *        msglim_reqstd - u16, Number of outstanding messages requested
+ *        user_data - uchar[16], 16-byte user data
  *        userid - uchar[8], User identification
- *        system_name - uchar[8], 8-byte identifying the system name 
+ *        system_name - uchar[8], 8-byte identifying the system name
  *        flags1 - int, Contains options for this path.
  *          -IPPRTY -   0x20, Specifies if you want to send priority message.
  *          -IPRMDATA - 0x80, Specifies whether your program can handle a message
  *               in  the parameter list.
- *          -IPQUSCE -  0x40, Specifies whether you want to quiesce the path being       
+ *          -IPQUSCE -  0x40, Specifies whether you want to quiesce the path being
  *              established.
- *          -IPLOCAL -  0X01, Allows an application to force the partner to be on 
+ *          -IPLOCAL -  0X01, Allows an application to force the partner to be on
  *              the local system. If local is specified then target class cannot be
- *              specified.                       
+ *              specified.
  *        flags1_out - int * Contains information about the path
  *           - IPPRTY - 0x20, Indicates you may send priority messages.
  *        msglim - * u16, Number of outstanding messages
- *        handle - iucv_handle_t, Address of handler                         
- *        pgm_data - void *, Application data passed to interrupt handlers              
+ *        handle - iucv_handle_t, Address of handler
+ *        pgm_data - void *, Application data passed to interrupt handlers
  * Output: return code from CP IUCV call
  *         rc - return code from iucv_declare_buffer
- *         -EINVAL - Invalid handle passed by application 
- *         -EINVAL - Pathid address is NULL 
- *         add_pathid_result - Return code from internal function add_pathid         
+ *         -EINVAL - Invalid handle passed by application
+ *         -EINVAL - Pathid address is NULL
+ *         add_pathid_result - Return code from internal function add_pathid
 */
 int
     iucv_connect (u16 * pathid,
@@ -397,16 +397,16 @@ int
                   int *flags1_out,
                   u16 * msglim, iucv_handle_t handle, void *pgm_data);
 
-/*                                                                     
- * Name: iucv_purge                                                    
- * Purpose: This function cancels a message that you have sent.        
- * Input: pathid - Path identification number.                          
+/*
+ * Name: iucv_purge
+ * Purpose: This function cancels a message that you have sent.
+ * Input: pathid - Path identification number.
  *        msgid - Specifies the message ID of the message to be purged.
- *        srccls - Specifies the source message class.                  
- * Output: audit - Contains information about asynchronous error       
- *                 that may have affected the normal completion        
- *                 of this message.                                    
- * Return: Return code from CP IUCV call.                           
+ *        srccls - Specifies the source message class.
+ * Output: audit - Contains information about asynchronous error
+ *                 that may have affected the normal completion
+ *                 of this message.
+ * Return: Return code from CP IUCV call.
 */
 int iucv_purge (u16 pathid, u32 msgid, u32 srccls, __u32 *audit);
 /*
@@ -426,38 +426,38 @@ ulong iucv_query_maxconn (void);
  */
 ulong iucv_query_bufsize (void);
 
-/*                                                                     
- * Name: iucv_quiesce                                                  
- * Purpose: This function temporarily suspends incoming messages on an 
- *          IUCV path. You can later reactivate the path by invoking   
- *          the iucv_resume function.                                  
- * Input: pathid - Path identification number                          
- *        user_data  - 16-bytes of user data                           
- * Output: NA                                                          
- * Return: Return code from CP IUCV call.                           
+/*
+ * Name: iucv_quiesce
+ * Purpose: This function temporarily suspends incoming messages on an
+ *          IUCV path. You can later reactivate the path by invoking
+ *          the iucv_resume function.
+ * Input: pathid - Path identification number
+ *        user_data  - 16-bytes of user data
+ * Output: NA
+ * Return: Return code from CP IUCV call.
 */
 int iucv_quiesce (u16 pathid, uchar user_data[16]);
 
-/*                                                                     
- * Name: iucv_receive                                                  
- * Purpose: This function receives messages that are being sent to you 
+/*
+ * Name: iucv_receive
+ * Purpose: This function receives messages that are being sent to you
  *          over established paths. Data will be returned in buffer for length of
  *          buflen.
- * Input: 
- *       pathid - Path identification number.                          
- *       buffer - Address of buffer to receive.                        
- *       buflen - Length of buffer to receive.                         
- *       msgid - Specifies the message ID.          
- *       trgcls - Specifies target class.                       
- * Output: 
+ * Input:
+ *       pathid - Path identification number.
+ *       buffer - Address of buffer to receive.
+ *       buflen - Length of buffer to receive.
+ *       msgid - Specifies the message ID.
+ *       trgcls - Specifies target class.
+ * Output:
  *       flags1_out: int *, Contains information about this path.
  *         IPNORPY - 0x10 Specifies this is a one-way message and no reply is
- *         expected.      
- *         IPPRTY  - 0x20 Specifies if you want to send priority message.       
+ *         expected.
+ *         IPPRTY  - 0x20 Specifies if you want to send priority message.
  *         IPRMDATA - 0x80 specifies the data is contained in the parameter list
  *       residual_buffer - address of buffer updated by the number
  *                         of bytes you have received.
- *       residual_length -      
+ *       residual_length -
  *              Contains one of the following values, if the receive buffer is:
  *               The same length as the message, this field is zero.
  *               Longer than the message, this field contains the number of
@@ -466,8 +466,8 @@ int iucv_quiesce (u16 pathid, uchar user_data[16]);
  *                count (that is, the number of bytes remaining in the
  *                message that does not fit into the buffer. In this
  *                case b2f0_result = 5.
- * Return: Return code from CP IUCV call.                           
- *         (-EINVAL) - buffer address is pointing to NULL                   
+ * Return: Return code from CP IUCV call.
+ *         (-EINVAL) - buffer address is pointing to NULL
 */
 int iucv_receive (u16 pathid,
                   u32 msgid,
@@ -477,16 +477,16 @@ int iucv_receive (u16 pathid,
                   int *flags1_out,
                   ulong * residual_buffer, ulong * residual_length);
 
- /*                                                                     
-  * Name: iucv_receive_array                                            
-  * Purpose: This function receives messages that are being sent to you 
+ /*
+  * Name: iucv_receive_array
+  * Purpose: This function receives messages that are being sent to you
   *          over established paths. Data will be returned in first buffer for
   *          length of first buffer.
-  * Input: pathid - Path identification number.                          
+  * Input: pathid - Path identification number.
   *        msgid - specifies the message ID.
   *        trgcls - Specifies target class.
-  *        buffer - Address of array of buffers.                         
-  *        buflen - Total length of buffers.                             
+  *        buffer - Address of array of buffers.
+  *        buflen - Total length of buffers.
   * Output:
   *        flags1_out: int *, Contains information about this path.
   *          IPNORPY - 0x10 Specifies this is a one-way message and no reply is
@@ -504,8 +504,8 @@ int iucv_receive (u16 pathid,
   *                count (that is, the number of bytes remaining in the
   *                message that does not fit into the buffer. In this
   *                case b2f0_result = 5.
-  * Return: Return code from CP IUCV call.                           
-  *         (-EINVAL) - Buffer address is NULL.       
+  * Return: Return code from CP IUCV call.
+  *         (-EINVAL) - Buffer address is NULL.
   */
 int iucv_receive_array (u16 pathid,
                         u32 msgid,
@@ -515,44 +515,44 @@ int iucv_receive_array (u16 pathid,
                         int *flags1_out,
                         ulong * residual_buffer, ulong * residual_length);
 
-/*                                                                       
- * Name: iucv_reject                                                     
- * Purpose: The reject function refuses a specified message. Between the 
- *          time you are notified of a message and the time that you     
- *          complete the message, the message may be rejected.           
- * Input: pathid - Path identification number.                            
- *        msgid - Specifies the message ID.                   
- *        trgcls - Specifies target class.                                
- * Output: NA                                                            
- * Return: Return code from CP IUCV call.                             
+/*
+ * Name: iucv_reject
+ * Purpose: The reject function refuses a specified message. Between the
+ *          time you are notified of a message and the time that you
+ *          complete the message, the message may be rejected.
+ * Input: pathid - Path identification number.
+ *        msgid - Specifies the message ID.
+ *        trgcls - Specifies target class.
+ * Output: NA
+ * Return: Return code from CP IUCV call.
 */
 int iucv_reject (u16 pathid, u32 msgid, u32 trgcls);
 
-/*                                                                     
- * Name: iucv_reply                                                    
- * Purpose: This function responds to the two-way messages that you    
- *          receive. You must identify completely the message to       
- *          which you wish to reply. ie, pathid, msgid, and trgcls.    
- * Input: pathid - Path identification number.                          
- *        msgid - Specifies the message ID.                
- *        trgcls - Specifies target class.                              
+/*
+ * Name: iucv_reply
+ * Purpose: This function responds to the two-way messages that you
+ *          receive. You must identify completely the message to
+ *          which you wish to reply. ie, pathid, msgid, and trgcls.
+ * Input: pathid - Path identification number.
+ *        msgid - Specifies the message ID.
+ *        trgcls - Specifies target class.
  *        flags1 - Option for path.
- *          IPPRTY- 0x20, Specifies if you want to send priority message.        
- *        buffer - Address of reply buffer.                             
- *        buflen - Length of reply buffer.                              
- * Output: residual_buffer - Address of buffer updated by the number 
- *                    of bytes you have moved.              
+ *          IPPRTY- 0x20, Specifies if you want to send priority message.
+ *        buffer - Address of reply buffer.
+ *        buflen - Length of reply buffer.
+ * Output: residual_buffer - Address of buffer updated by the number
+ *                    of bytes you have moved.
  *         residual_length - Contains one of the following values:
  *              If the answer buffer is the same length as the reply, this field
  *               contains zero.
  *              If the answer buffer is longer than the reply, this field contains
- *               the number of bytes remaining in the buffer.  
+ *               the number of bytes remaining in the buffer.
  *              If the answer buffer is shorter than the reply, this field contains
  *               a residual count (that is, the number of bytes remianing in the
  *               reply that does not fit into the buffer. In this
  *               case b2f0_result = 5.
- * Return: Return code from CP IUCV call.                           
- *         (-EINVAL) - Buffer address is NULL.                               
+ * Return: Return code from CP IUCV call.
+ *         (-EINVAL) - Buffer address is NULL.
 */
 int iucv_reply (u16 pathid,
                 u32 msgid,
@@ -561,20 +561,20 @@ int iucv_reply (u16 pathid,
                 void *buffer, ulong buflen, ulong * residual_buffer,
                 ulong * residual_length);
 
-/*                                                                       
- * Name: iucv_reply_array                                                
- * Purpose: This function responds to the two-way messages that you      
- *          receive. You must identify completely the message to         
- *          which you wish to reply. ie, pathid, msgid, and trgcls.      
- *          The array identifies a list of addresses and lengths of      
- *          discontiguous buffers that contains the reply data.          
- * Input: pathid - Path identification number                            
- *        msgid - Specifies the message ID. 
- *        trgcls - Specifies target class.                                
+/*
+ * Name: iucv_reply_array
+ * Purpose: This function responds to the two-way messages that you
+ *          receive. You must identify completely the message to
+ *          which you wish to reply. ie, pathid, msgid, and trgcls.
+ *          The array identifies a list of addresses and lengths of
+ *          discontiguous buffers that contains the reply data.
+ * Input: pathid - Path identification number
+ *        msgid - Specifies the message ID.
+ *        trgcls - Specifies target class.
  *        flags1 - Option for path.
  *          IPPRTY- 0x20, Specifies if you want to send priority message.
- *        buffer - Address of array of reply buffers.                     
- *        buflen - Total length of reply buffers.                         
+ *        buffer - Address of array of reply buffers.
+ *        buflen - Total length of reply buffers.
  * Output: residual_buffer - Address of buffer which IUCV is currently working on.
  *         residual_length - Contains one of the following values:
  *              If the answer buffer is the same length as the reply, this field
@@ -585,8 +585,8 @@ int iucv_reply (u16 pathid,
  *               a residual count (that is, the number of bytes remianing in the
  *               reply that does not fit into the buffer. In this
  *               case b2f0_result = 5.
- * Return: Return code from CP IUCV call.                             
- *         (-EINVAL) - Buffer address is NULL.              
+ * Return: Return code from CP IUCV call.
+ *         (-EINVAL) - Buffer address is NULL.
 */
 int iucv_reply_array (u16 pathid,
                       u32 msgid,
@@ -596,77 +596,77 @@ int iucv_reply_array (u16 pathid,
                       ulong buflen, ulong * residual_address,
                       ulong * residual_length);
 
-/*                                                                  
- * Name: iucv_reply_prmmsg                                          
- * Purpose: This function responds to the two-way messages that you 
- *          receive. You must identify completely the message to    
- *          which you wish to reply. ie, pathid, msgid, and trgcls. 
- *          Prmmsg signifies the data is moved into the             
- *          parameter list.                                         
- * Input: pathid - Path identification number.                       
- *        msgid - Specifies the message ID.              
- *        trgcls - Specifies target class.                           
+/*
+ * Name: iucv_reply_prmmsg
+ * Purpose: This function responds to the two-way messages that you
+ *          receive. You must identify completely the message to
+ *          which you wish to reply. ie, pathid, msgid, and trgcls.
+ *          Prmmsg signifies the data is moved into the
+ *          parameter list.
+ * Input: pathid - Path identification number.
+ *        msgid - Specifies the message ID.
+ *        trgcls - Specifies target class.
  *        flags1 - Option for path.
  *          IPPRTY- 0x20 Specifies if you want to send priority message.
- *        prmmsg - 8-bytes of data to be placed into the parameter.  
- *                 list.                                            
- * Output: NA                                                       
- * Return: Return code from CP IUCV call.                        
+ *        prmmsg - 8-bytes of data to be placed into the parameter.
+ *                 list.
+ * Output: NA
+ * Return: Return code from CP IUCV call.
 */
 int iucv_reply_prmmsg (u16 pathid,
                        u32 msgid, u32 trgcls, int flags1, uchar prmmsg[8]);
 
-/*                                                                     
- * Name: iucv_resume                                                   
- * Purpose: This function restores communications over a quiesced path 
- * Input: pathid - Path identification number.                          
- *        user_data  - 16-bytes of user data.                           
- * Output: NA                                                          
- * Return: Return code from CP IUCV call.                           
+/*
+ * Name: iucv_resume
+ * Purpose: This function restores communications over a quiesced path
+ * Input: pathid - Path identification number.
+ *        user_data  - 16-bytes of user data.
+ * Output: NA
+ * Return: Return code from CP IUCV call.
 */
 int iucv_resume (u16 pathid, uchar user_data[16]);
 
-/*                                                                   
- * Name: iucv_send                                                   
- * Purpose: This function transmits data to another application.     
- *          Data to be transmitted is in a buffer and this is a      
- *          one-way message and the receiver will not reply to the   
- *          message.                                                 
- * Input: pathid - Path identification number.                        
- *        trgcls - Specifies target class.                            
- *        srccls - Specifies the source message class.                
- *        msgtag - Specifies a tag to be associated with the message. 
+/*
+ * Name: iucv_send
+ * Purpose: This function transmits data to another application.
+ *          Data to be transmitted is in a buffer and this is a
+ *          one-way message and the receiver will not reply to the
+ *          message.
+ * Input: pathid - Path identification number.
+ *        trgcls - Specifies target class.
+ *        srccls - Specifies the source message class.
+ *        msgtag - Specifies a tag to be associated with the message.
  *        flags1 - Option for path.
  *          IPPRTY- 0x20 Specifies if you want to send priority message.
- *        buffer - Address of send buffer.                            
- *        buflen - Length of send buffer.                             
- * Output: msgid - Specifies the message ID.                         
- * Return: Return code from CP IUCV call.                         
- *         (-EINVAL) - Buffer address is NULL.                             
+ *        buffer - Address of send buffer.
+ *        buflen - Length of send buffer.
+ * Output: msgid - Specifies the message ID.
+ * Return: Return code from CP IUCV call.
+ *         (-EINVAL) - Buffer address is NULL.
 */
 int iucv_send (u16 pathid,
                u32 * msgid,
                u32 trgcls,
                u32 srccls, u32 msgtag, int flags1, void *buffer, ulong buflen);
 
-/*                                                                   
- * Name: iucv_send_array                                             
- * Purpose: This function transmits data to another application.     
- *          The contents of buffer is the address of the array of    
- *          addresses and lengths of discontiguous buffers that hold 
- *          the message text. This is a one-way message and the      
- *          receiver will not reply to the message.                  
- * Input: pathid - Path identification number.                        
- *        trgcls - Specifies target class.                            
- *        srccls - Specifies the source message class.                
+/*
+ * Name: iucv_send_array
+ * Purpose: This function transmits data to another application.
+ *          The contents of buffer is the address of the array of
+ *          addresses and lengths of discontiguous buffers that hold
+ *          the message text. This is a one-way message and the
+ *          receiver will not reply to the message.
+ * Input: pathid - Path identification number.
+ *        trgcls - Specifies target class.
+ *        srccls - Specifies the source message class.
  *        msgtag - Specifies a tag to be associated witht the message.
  *        flags1 - Option for path.
- *          IPPRTY- specifies if you want to send priority message. 
- *        buffer - Address of array of send buffers.                  
- *        buflen - Total length of send buffers.                      
- * Output: msgid - Specifies the message ID.                         
- * Return: Return code from CP IUCV call.                         
- *         (-EINVAL) - Buffer address is NULL.                             
+ *          IPPRTY- specifies if you want to send priority message.
+ *        buffer - Address of array of send buffers.
+ *        buflen - Total length of send buffers.
+ * Output: msgid - Specifies the message ID.
+ * Return: Return code from CP IUCV call.
+ *         (-EINVAL) - Buffer address is NULL.
 */
 int iucv_send_array (u16 pathid,
                      u32 * msgid,
@@ -675,48 +675,48 @@ int iucv_send_array (u16 pathid,
                      u32 msgtag,
                      int flags1, iucv_array_t * buffer, ulong buflen);
 
-/*                                                                     
- * Name: iucv_send_prmmsg                                              
- * Purpose: This function transmits data to another application.       
- *          Prmmsg specifies that the 8-bytes of data are to be moved  
- *          into the parameter list. This is a one-way message and the 
- *          receiver will not reply to the message.                    
- * Input: pathid - Path identification number.                          
- *        trgcls - Specifies target class.                              
- *        srccls - Specifies the source message class.                  
- *        msgtag - Specifies a tag to be associated with the message.   
+/*
+ * Name: iucv_send_prmmsg
+ * Purpose: This function transmits data to another application.
+ *          Prmmsg specifies that the 8-bytes of data are to be moved
+ *          into the parameter list. This is a one-way message and the
+ *          receiver will not reply to the message.
+ * Input: pathid - Path identification number.
+ *        trgcls - Specifies target class.
+ *        srccls - Specifies the source message class.
+ *        msgtag - Specifies a tag to be associated with the message.
  *        flags1 - Option for path.
  *          IPPRTY- 0x20 specifies if you want to send priority message.
- *        prmmsg - 8-bytes of data to be placed into parameter list.    
- * Output: msgid - Specifies the message ID.                           
- * Return: Return code from CP IUCV call.                           
+ *        prmmsg - 8-bytes of data to be placed into parameter list.
+ * Output: msgid - Specifies the message ID.
+ * Return: Return code from CP IUCV call.
 */
 int iucv_send_prmmsg (u16 pathid,
                       u32 * msgid,
                       u32 trgcls,
                       u32 srccls, u32 msgtag, int flags1, uchar prmmsg[8]);
 
-/*                                                                
- * Name: iucv_send2way                                            
- * Purpose: This function transmits data to another application.  
- *          Data to be transmitted is in a buffer. The receiver   
- *          of the send is expected to reply to the message and   
- *          a buffer is provided into which IUCV moves the reply  
- *          to this message.                                      
- * Input: pathid - Path identification number.                     
- *        trgcls - Specifies target class.                         
- *        srccls - Specifies the source message class.             
- *        msgtag - Specifies a tag associated with the message.    
+/*
+ * Name: iucv_send2way
+ * Purpose: This function transmits data to another application.
+ *          Data to be transmitted is in a buffer. The receiver
+ *          of the send is expected to reply to the message and
+ *          a buffer is provided into which IUCV moves the reply
+ *          to this message.
+ * Input: pathid - Path identification number.
+ *        trgcls - Specifies target class.
+ *        srccls - Specifies the source message class.
+ *        msgtag - Specifies a tag associated with the message.
  *        flags1 - Option for path.
  *          IPPRTY- 0x20 Specifies if you want to send priority message.
- *        buffer - Address of send buffer.                         
- *        buflen - Length of send buffer.                          
- *        ansbuf - Address of buffer into which IUCV moves the reply of 
- *                 this message.        
- *        anslen - Address of length of buffer.          
- * Output: msgid - Specifies the message ID.                      
- * Return: Return code from CP IUCV call.                      
- *         (-EINVAL) - Buffer or ansbuf address is NULL.    
+ *        buffer - Address of send buffer.
+ *        buflen - Length of send buffer.
+ *        ansbuf - Address of buffer into which IUCV moves the reply of
+ *                 this message.
+ *        anslen - Address of length of buffer.
+ * Output: msgid - Specifies the message ID.
+ * Return: Return code from CP IUCV call.
+ *         (-EINVAL) - Buffer or ansbuf address is NULL.
 */
 int iucv_send2way (u16 pathid,
                    u32 * msgid,
@@ -726,28 +726,28 @@ int iucv_send2way (u16 pathid,
                    int flags1,
                    void *buffer, ulong buflen, void *ansbuf, ulong anslen);
 
-/*                                                                    
- * Name: iucv_send2way_array                                          
- * Purpose: This function transmits data to another application.      
- *          The contents of buffer is the address of the array of     
- *          addresses and lengths of discontiguous buffers that hold  
- *          the message text. The receiver of the send is expected to 
- *          reply to the message and a buffer is provided into which  
- *          IUCV moves the reply to this message.                     
- * Input: pathid - Path identification number.                         
- *        trgcls - Specifies target class.                             
- *        srccls - Specifies the source message class.                 
- *        msgtag - Specifies a tag to be associated with the message.   
+/*
+ * Name: iucv_send2way_array
+ * Purpose: This function transmits data to another application.
+ *          The contents of buffer is the address of the array of
+ *          addresses and lengths of discontiguous buffers that hold
+ *          the message text. The receiver of the send is expected to
+ *          reply to the message and a buffer is provided into which
+ *          IUCV moves the reply to this message.
+ * Input: pathid - Path identification number.
+ *        trgcls - Specifies target class.
+ *        srccls - Specifies the source message class.
+ *        msgtag - Specifies a tag to be associated with the message.
  *        flags1 - Option for path.
  *          IPPRTY- 0x20 Specifies if you want to send priority message.
- *        buffer - Sddress of array of send buffers.                   
- *        buflen - Total length of send buffers.                       
- *        ansbuf - Address of array of buffer into which IUCV moves the reply            
- *                 of this message.                         
- *        anslen - Address of length reply buffers.              
- * Output: msgid - Specifies the message ID.                          
- * Return: Return code from CP IUCV call.                          
- *         (-EINVAL) - Buffer address is NULL.                              
+ *        buffer - Sddress of array of send buffers.
+ *        buflen - Total length of send buffers.
+ *        ansbuf - Address of array of buffer into which IUCV moves the reply
+ *                 of this message.
+ *        anslen - Address of length reply buffers.
+ * Output: msgid - Specifies the message ID.
+ * Return: Return code from CP IUCV call.
+ *         (-EINVAL) - Buffer address is NULL.
 */
 int iucv_send2way_array (u16 pathid,
                          u32 * msgid,
@@ -758,27 +758,27 @@ int iucv_send2way_array (u16 pathid,
                          iucv_array_t * buffer,
                          ulong buflen, iucv_array_t * ansbuf, ulong anslen);
 
-/*                                                                     
- * Name: iucv_send2way_prmmsg                                          
- * Purpose: This function transmits data to another application.       
- *          Prmmsg specifies that the 8-bytes of data are to be moved  
- *          into the parameter list. This is a two-way message and the 
- *          receiver of the message is expected to reply. A buffer     
- *          is provided into which IUCV moves the reply to this        
- *          message.                                                   
- * Input: pathid - Rath identification number.                          
- *        trgcls - Specifies target class.                              
- *        srccls - Specifies the source message class.                  
- *        msgtag - Specifies a tag to be associated with the message.   
+/*
+ * Name: iucv_send2way_prmmsg
+ * Purpose: This function transmits data to another application.
+ *          Prmmsg specifies that the 8-bytes of data are to be moved
+ *          into the parameter list. This is a two-way message and the
+ *          receiver of the message is expected to reply. A buffer
+ *          is provided into which IUCV moves the reply to this
+ *          message.
+ * Input: pathid - Rath identification number.
+ *        trgcls - Specifies target class.
+ *        srccls - Specifies the source message class.
+ *        msgtag - Specifies a tag to be associated with the message.
  *        flags1 - Option for path.
  *          IPPRTY- 0x20 Specifies if you want to send priority message.
- *        prmmsg - 8-bytes of data to be placed in parameter list.      
- *        ansbuf - Address of buffer into which IUCV moves the reply of    
+ *        prmmsg - 8-bytes of data to be placed in parameter list.
+ *        ansbuf - Address of buffer into which IUCV moves the reply of
  *                 this message.
- *        anslen - Address of length of buffer.               
- * Output: msgid - Specifies the message ID.                           
- * Return: Return code from CP IUCV call.                           
- *         (-EINVAL) - Buffer address is NULL.         
+ *        anslen - Address of length of buffer.
+ * Output: msgid - Specifies the message ID.
+ * Return: Return code from CP IUCV call.
+ *         (-EINVAL) - Buffer address is NULL.
 */
 int iucv_send2way_prmmsg (u16 pathid,
                           u32 * msgid,
@@ -788,29 +788,29 @@ int iucv_send2way_prmmsg (u16 pathid,
                           ulong flags1,
                           uchar prmmsg[8], void *ansbuf, ulong anslen);
 
-/*                                                                      
- * Name: iucv_send2way_prmmsg_array                                     
- * Purpose: This function transmits data to another application.        
- *          Prmmsg specifies that the 8-bytes of data are to be moved   
- *          into the parameter list. This is a two-way message and the  
- *          receiver of the message is expected to reply. A buffer      
- *          is provided into which IUCV moves the reply to this         
- *          message. The contents of ansbuf is the address of the       
- *          array of addresses and lengths of discontiguous buffers     
- *          that contain the reply.                                     
- * Input: pathid - Path identification number.                           
- *        trgcls - Specifies target class.                               
- *        srccls - Specifies the source message class.                   
- *        msgtag - Specifies a tag to be associated with the message.    
+/*
+ * Name: iucv_send2way_prmmsg_array
+ * Purpose: This function transmits data to another application.
+ *          Prmmsg specifies that the 8-bytes of data are to be moved
+ *          into the parameter list. This is a two-way message and the
+ *          receiver of the message is expected to reply. A buffer
+ *          is provided into which IUCV moves the reply to this
+ *          message. The contents of ansbuf is the address of the
+ *          array of addresses and lengths of discontiguous buffers
+ *          that contain the reply.
+ * Input: pathid - Path identification number.
+ *        trgcls - Specifies target class.
+ *        srccls - Specifies the source message class.
+ *        msgtag - Specifies a tag to be associated with the message.
  *        flags1 - Option for path.
  *          IPPRTY- 0x20 specifies if you want to send priority message.
- *        prmmsg - 8-bytes of data to be placed into the parameter list. 
+ *        prmmsg - 8-bytes of data to be placed into the parameter list.
  *        ansbuf - Address of array of buffer into which IUCV moves the reply
- *                 of this message.  
- *        anslen - Address of length of reply buffers.                
- * Output: msgid - Specifies the message ID.      
- * Return: Return code from CP IUCV call.      
- *         (-EINVAL) - Ansbuf address is NULL.          
+ *                 of this message.
+ *        anslen - Address of length of reply buffers.
+ * Output: msgid - Specifies the message ID.
+ * Return: Return code from CP IUCV call.
+ *         (-EINVAL) - Ansbuf address is NULL.
 */
 int iucv_send2way_prmmsg_array (u16 pathid,
                                 u32 * msgid,
@@ -821,29 +821,29 @@ int iucv_send2way_prmmsg_array (u16 pathid,
                                 uchar prmmsg[8],
                                 iucv_array_t * ansbuf, ulong anslen);
 
-/*                                                                   
- * Name: iucv_setmask                                                
- * Purpose: This function enables or disables the following IUCV     
- *          external interruptions: Nonpriority and priority message 
- *          interrupts, nonpriority and priority reply interrupts.   
+/*
+ * Name: iucv_setmask
+ * Purpose: This function enables or disables the following IUCV
+ *          external interruptions: Nonpriority and priority message
+ *          interrupts, nonpriority and priority reply interrupts.
  * Input: SetMaskFlag - options for interrupts
- *           0x80 - Nonpriority_MessagePendingInterruptsFlag         
- *           0x40 - Priority_MessagePendingInterruptsFlag            
- *           0x20 - Nonpriority_MessageCompletionInterruptsFlag      
- *           0x10 - Priority_MessageCompletionInterruptsFlag         
+ *           0x80 - Nonpriority_MessagePendingInterruptsFlag
+ *           0x40 - Priority_MessagePendingInterruptsFlag
+ *           0x20 - Nonpriority_MessageCompletionInterruptsFlag
+ *           0x10 - Priority_MessageCompletionInterruptsFlag
  *           0x08 - IUCVControlInterruptsFlag
- * Output: NA                                                        
- * Return: Return code from CP IUCV call.                         
+ * Output: NA
+ * Return: Return code from CP IUCV call.
 */
 int iucv_setmask (int SetMaskFlag);
 
-/*                                                  
- * Name: iucv_sever                                 
- * Purpose: This function terminates an IUCV path.  
- * Input: pathid - Path identification number.       
- *        user_data - 16-bytes of user data.         
- * Output: NA       
- * Return: Return code from CP IUCV call.                                
- *         (-EINVAL) - Interal error, wild pointer.       
+/*
+ * Name: iucv_sever
+ * Purpose: This function terminates an IUCV path.
+ * Input: pathid - Path identification number.
+ *        user_data - 16-bytes of user data.
+ * Output: NA
+ * Return: Return code from CP IUCV call.
+ *         (-EINVAL) - Interal error, wild pointer.
 */
 int iucv_sever (u16 pathid, uchar user_data[16]);