rtc: Ramtron FM3130 RTC support

Ramtron FM3130 is a chip with two separate devices inside, RTC clock and
FRAM.  This driver provides only RTC functionality.

This chip is met in lots of custom boards with AT91SAMXXXX CPU I work
with, is cheap and in no way better or worse than any other RTC on market.
 While it is mostly met on much smaller devices, I think it is great to
have it supported in Linux.

Signed-off-by: Sergey Lapin <slapin@ossfans.org>
Signed-off-by: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

3 files changed, 514 insertions, 1 deletions

diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
index 60f8afc7a56e..4949dc4859be 100644
--- a/drivers/rtc/Kconfig
+++ b/drivers/rtc/Kconfig
@@ -256,6 +256,17 @@ config RTC_DRV_S35390A
           This driver can also be built as a module. If so the module
           will be called rtc-s35390a.
 
+config RTC_DRV_FM3130
+        tristate "Ramtron FM3130"
+        help
+          If you say Y here you will get support for the
+          Ramtron FM3130 RTC chips.
+          Ramtron FM3130 is a chip with two separate devices inside,
+          RTC clock and FRAM. This driver provides only RTC functionality.
+
+          This driver can also be built as a module. If so the module
+          will be called rtc-fm3130.
+
 endif # I2C
 
 comment "SPI RTC drivers"
diff --git a/drivers/rtc/Makefile b/drivers/rtc/Makefile
index ebe871cf16c1..b6e14d51670b 100644
--- a/drivers/rtc/Makefile
+++ b/drivers/rtc/Makefile
@@ -31,6 +31,7 @@ obj-$(CONFIG_RTC_DRV_DS1553)	+= rtc-ds1553.o
 obj-$(CONFIG_RTC_DRV_DS1672)    += rtc-ds1672.o
 obj-$(CONFIG_RTC_DRV_DS1742)    += rtc-ds1742.o
 obj-$(CONFIG_RTC_DRV_EP93XX)    += rtc-ep93xx.o
+obj-$(CONFIG_RTC_DRV_FM3130)    += rtc-fm3130.o
 obj-$(CONFIG_RTC_DRV_ISL1208)   += rtc-isl1208.o
 obj-$(CONFIG_RTC_DRV_M41T80)    += rtc-m41t80.o
 obj-$(CONFIG_RTC_DRV_M48T59)    += rtc-m48t59.o
@@ -41,6 +42,7 @@ obj-$(CONFIG_RTC_DRV_OMAP)	+= rtc-omap.o
 obj-$(CONFIG_RTC_DRV_PCF8563)   += rtc-pcf8563.o
 obj-$(CONFIG_RTC_DRV_PCF8583)   += rtc-pcf8583.o
 obj-$(CONFIG_RTC_DRV_PL031)     += rtc-pl031.o
+obj-$(CONFIG_RTC_DRV_PPC)       += rtc-ppc.o
 obj-$(CONFIG_RTC_DRV_R9701)     += rtc-r9701.o
 obj-$(CONFIG_RTC_DRV_RS5C313)   += rtc-rs5c313.o
 obj-$(CONFIG_RTC_DRV_RS5C348)   += rtc-rs5c348.o
@@ -54,4 +56,3 @@ obj-$(CONFIG_RTC_DRV_TEST)	+= rtc-test.o
 obj-$(CONFIG_RTC_DRV_V3020)     += rtc-v3020.o
 obj-$(CONFIG_RTC_DRV_VR41XX)    += rtc-vr41xx.o
 obj-$(CONFIG_RTC_DRV_X1205)     += rtc-x1205.o
-obj-$(CONFIG_RTC_DRV_PPC)       += rtc-ppc.o
diff --git a/drivers/rtc/rtc-fm3130.c b/drivers/rtc/rtc-fm3130.c
new file mode 100644
index 000000000000..11644c8fca82
--- /dev/null
+++ b/drivers/rtc/rtc-fm3130.c
@@ -0,0 +1,501 @@
+/*
+ * rtc-fm3130.c - RTC driver for Ramtron FM3130 I2C chip.
+ *
+ *  Copyright (C) 2008 Sergey Lapin
+ *  Based on ds1307 driver by James Chapman and David Brownell
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/i2c.h>
+#include <linux/rtc.h>
+#include <linux/bcd.h>
+
+#define FM3130_RTC_CONTROL      (0x0)
+#define FM3130_CAL_CONTROL      (0x1)
+#define FM3130_RTC_SECONDS      (0x2)
+#define FM3130_RTC_MINUTES      (0x3)
+#define FM3130_RTC_HOURS        (0x4)
+#define FM3130_RTC_DAY          (0x5)
+#define FM3130_RTC_DATE         (0x6)
+#define FM3130_RTC_MONTHS       (0x7)
+#define FM3130_RTC_YEARS        (0x8)
+
+#define FM3130_ALARM_SECONDS    (0x9)
+#define FM3130_ALARM_MINUTES    (0xa)
+#define FM3130_ALARM_HOURS      (0xb)
+#define FM3130_ALARM_DATE       (0xc)
+#define FM3130_ALARM_MONTHS     (0xd)
+#define FM3130_ALARM_WP_CONTROL (0xe)
+
+#define FM3130_CAL_CONTROL_BIT_nOSCEN (1 << 7) /* Osciallator enabled */
+#define FM3130_RTC_CONTROL_BIT_LB (1 << 7) /* Low battery */
+#define FM3130_RTC_CONTROL_BIT_AF (1 << 6) /* Alarm flag */
+#define FM3130_RTC_CONTROL_BIT_CF (1 << 5) /* Century overflow */
+#define FM3130_RTC_CONTROL_BIT_POR (1 << 4) /* Power on reset */
+#define FM3130_RTC_CONTROL_BIT_AEN (1 << 3) /* Alarm enable */
+#define FM3130_RTC_CONTROL_BIT_CAL (1 << 2) /* Calibration mode */
+#define FM3130_RTC_CONTROL_BIT_WRITE (1 << 1) /* W=1 -> write mode W=0 normal */
+#define FM3130_RTC_CONTROL_BIT_READ (1 << 0) /* R=1 -> read mode R=0 normal */
+
+#define FM3130_CLOCK_REGS 7
+#define FM3130_ALARM_REGS 5
+
+struct fm3130 {
+        u8                      reg_addr_time;
+        u8                      reg_addr_alarm;
+        u8                      regs[15];
+        struct i2c_msg          msg[4];
+        struct i2c_client       *client;
+        struct rtc_device       *rtc;
+        int                     data_valid;
+        int                     alarm;
+};
+static const struct i2c_device_id fm3130_id[] = {
+        { "fm3130-rtc", 0 },
+        { }
+};
+MODULE_DEVICE_TABLE(i2c, fm3130_id);
+
+#define FM3130_MODE_NORMAL              0
+#define FM3130_MODE_WRITE               1
+#define FM3130_MODE_READ                2
+
+static void fm3130_rtc_mode(struct device *dev, int mode)
+{
+        struct fm3130 *fm3130 = dev_get_drvdata(dev);
+
+        fm3130->regs[FM3130_RTC_CONTROL] =
+                i2c_smbus_read_byte_data(fm3130->client, FM3130_RTC_CONTROL);
+        switch (mode) {
+        case FM3130_MODE_NORMAL:
+                fm3130->regs[FM3130_RTC_CONTROL] &=
+                        ~(FM3130_RTC_CONTROL_BIT_WRITE |
+                        FM3130_RTC_CONTROL_BIT_READ);
+                break;
+        case FM3130_MODE_WRITE:
+                fm3130->regs[FM3130_RTC_CONTROL] |= FM3130_RTC_CONTROL_BIT_WRITE;
+                break;
+        case FM3130_MODE_READ:
+                fm3130->regs[FM3130_RTC_CONTROL] |= FM3130_RTC_CONTROL_BIT_READ;
+                break;
+        default:
+                dev_dbg(dev, "invalid mode %d\n", mode);
+                break;
+        }
+        /* Checking for alarm */
+        if (fm3130->regs[FM3130_RTC_CONTROL] & FM3130_RTC_CONTROL_BIT_AF) {
+                fm3130->alarm = 1;
+                fm3130->regs[FM3130_RTC_CONTROL] &= ~FM3130_RTC_CONTROL_BIT_AF;
+        }
+        i2c_smbus_write_byte_data(fm3130->client,
+                 FM3130_RTC_CONTROL, fm3130->regs[FM3130_RTC_CONTROL]);
+}
+
+static int fm3130_get_time(struct device *dev, struct rtc_time *t)
+{
+        struct fm3130 *fm3130 = dev_get_drvdata(dev);
+        int             tmp;
+
+        if (!fm3130->data_valid) {
+                /* We have invalid data in RTC, probably due
+                to battery faults or other problems. Return EIO
+                for now, it will allow us to set data later insted
+                of error during probing which disables device */
+                return -EIO;
+        }
+        fm3130_rtc_mode(dev, FM3130_MODE_READ);
+
+        /* read the RTC date and time registers all at once */
+        tmp = i2c_transfer(to_i2c_adapter(fm3130->client->dev.parent),
+                        fm3130->msg, 2);
+        if (tmp != 2) {
+                dev_err(dev, "%s error %d\n", "read", tmp);
+                return -EIO;
+        }
+
+        fm3130_rtc_mode(dev, FM3130_MODE_NORMAL);
+
+        dev_dbg(dev, "%s: %02x %02x %02x %02x %02x %02x %02x %02x"
+                        "%02x %02x %02x %02x %02x %02x %02x\n",
+                        "read",
+                        fm3130->regs[0], fm3130->regs[1],
+                        fm3130->regs[2], fm3130->regs[3],
+                        fm3130->regs[4], fm3130->regs[5],
+                        fm3130->regs[6], fm3130->regs[7],
+                        fm3130->regs[8], fm3130->regs[9],
+                        fm3130->regs[0xa], fm3130->regs[0xb],
+                        fm3130->regs[0xc], fm3130->regs[0xd],
+                        fm3130->regs[0xe]);
+
+        t->tm_sec = BCD2BIN(fm3130->regs[FM3130_RTC_SECONDS] & 0x7f);
+        t->tm_min = BCD2BIN(fm3130->regs[FM3130_RTC_MINUTES] & 0x7f);
+        tmp = fm3130->regs[FM3130_RTC_HOURS] & 0x3f;
+        t->tm_hour = BCD2BIN(tmp);
+        t->tm_wday = BCD2BIN(fm3130->regs[FM3130_RTC_DAY] & 0x07) - 1;
+        t->tm_mday = BCD2BIN(fm3130->regs[FM3130_RTC_DATE] & 0x3f);
+        tmp = fm3130->regs[FM3130_RTC_MONTHS] & 0x1f;
+        t->tm_mon = BCD2BIN(tmp) - 1;
+
+        /* assume 20YY not 19YY, and ignore CF bit */
+        t->tm_year = BCD2BIN(fm3130->regs[FM3130_RTC_YEARS]) + 100;
+
+        dev_dbg(dev, "%s secs=%d, mins=%d, "
+                "hours=%d, mday=%d, mon=%d, year=%d, wday=%d\n",
+                "read", t->tm_sec, t->tm_min,
+                t->tm_hour, t->tm_mday,
+                t->tm_mon, t->tm_year, t->tm_wday);
+
+        /* initial clock setting can be undefined */
+        return rtc_valid_tm(t);
+}
+
+
+static int fm3130_set_time(struct device *dev, struct rtc_time *t)
+{
+        struct fm3130 *fm3130 = dev_get_drvdata(dev);
+        int             tmp, i;
+        u8              *buf = fm3130->regs;
+
+        dev_dbg(dev, "%s secs=%d, mins=%d, "
+                "hours=%d, mday=%d, mon=%d, year=%d, wday=%d\n",
+                "write", t->tm_sec, t->tm_min,
+                t->tm_hour, t->tm_mday,
+                t->tm_mon, t->tm_year, t->tm_wday);
+
+        /* first register addr */
+        buf[FM3130_RTC_SECONDS] = BIN2BCD(t->tm_sec);
+        buf[FM3130_RTC_MINUTES] = BIN2BCD(t->tm_min);
+        buf[FM3130_RTC_HOURS] = BIN2BCD(t->tm_hour);
+        buf[FM3130_RTC_DAY] = BIN2BCD(t->tm_wday + 1);
+        buf[FM3130_RTC_DATE] = BIN2BCD(t->tm_mday);
+        buf[FM3130_RTC_MONTHS] = BIN2BCD(t->tm_mon + 1);
+
+        /* assume 20YY not 19YY */
+        tmp = t->tm_year - 100;
+        buf[FM3130_RTC_YEARS] = BIN2BCD(tmp);
+
+        dev_dbg(dev, "%s: %02x %02x %02x %02x %02x %02x %02x"
+                "%02x %02x %02x %02x %02x %02x %02x %02x\n",
+                "write", buf[0], buf[1], buf[2], buf[3],
+                buf[4], buf[5], buf[6], buf[7],
+                buf[8], buf[9], buf[0xa], buf[0xb],
+                buf[0xc], buf[0xd], buf[0xe]);
+
+        fm3130_rtc_mode(dev, FM3130_MODE_WRITE);
+
+        /* Writing time registers, we don't support multibyte transfers */
+        for (i = 0; i < FM3130_CLOCK_REGS; i++) {
+                i2c_smbus_write_byte_data(fm3130->client,
+                                        FM3130_RTC_SECONDS + i,
+                                        fm3130->regs[FM3130_RTC_SECONDS + i]);
+        }
+
+        fm3130_rtc_mode(dev, FM3130_MODE_NORMAL);
+
+        /* We assume here that data are valid once written */
+        if (!fm3130->data_valid)
+                fm3130->data_valid = 1;
+        return 0;
+}
+
+static int fm3130_read_alarm(struct device *dev, struct rtc_wkalrm *alrm)
+{
+        struct fm3130 *fm3130 = dev_get_drvdata(dev);
+        int tmp;
+        struct rtc_time *tm = &alrm->time;
+        /* read the RTC alarm registers all at once */
+        tmp = i2c_transfer(to_i2c_adapter(fm3130->client->dev.parent),
+                        &fm3130->msg[2], 2);
+        if (tmp != 2) {
+                dev_err(dev, "%s error %d\n", "read", tmp);
+                return -EIO;
+        }
+        dev_dbg(dev, "alarm read %02x %02x %02x %02x %02x\n",
+                        fm3130->regs[FM3130_ALARM_SECONDS],
+                        fm3130->regs[FM3130_ALARM_MINUTES],
+                        fm3130->regs[FM3130_ALARM_HOURS],
+                        fm3130->regs[FM3130_ALARM_DATE],
+                        fm3130->regs[FM3130_ALARM_MONTHS]);
+
+
+        tm->tm_sec      = BCD2BIN(fm3130->regs[FM3130_ALARM_SECONDS] & 0x7F);
+        tm->tm_min      = BCD2BIN(fm3130->regs[FM3130_ALARM_MINUTES] & 0x7F);
+        tm->tm_hour     = BCD2BIN(fm3130->regs[FM3130_ALARM_HOURS] & 0x3F);
+        tm->tm_mday     = BCD2BIN(fm3130->regs[FM3130_ALARM_DATE] & 0x3F);
+        tm->tm_mon      = BCD2BIN(fm3130->regs[FM3130_ALARM_MONTHS] & 0x1F);
+        if (tm->tm_mon > 0)
+                tm->tm_mon -= 1; /* RTC is 1-12, tm_mon is 0-11 */
+        dev_dbg(dev, "%s secs=%d, mins=%d, "
+                "hours=%d, mday=%d, mon=%d, year=%d, wday=%d\n",
+                "read alarm", tm->tm_sec, tm->tm_min,
+                tm->tm_hour, tm->tm_mday,
+                tm->tm_mon, tm->tm_year, tm->tm_wday);
+
+        return 0;
+}
+
+static int fm3130_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
+{
+        struct fm3130 *fm3130 = dev_get_drvdata(dev);
+        struct rtc_time *tm = &alrm->time;
+        int i;
+
+        dev_dbg(dev, "%s secs=%d, mins=%d, "
+                "hours=%d, mday=%d, mon=%d, year=%d, wday=%d\n",
+                "write alarm", tm->tm_sec, tm->tm_min,
+                tm->tm_hour, tm->tm_mday,
+                tm->tm_mon, tm->tm_year, tm->tm_wday);
+
+        if (tm->tm_sec != -1)
+                fm3130->regs[FM3130_ALARM_SECONDS] =
+                        BIN2BCD(tm->tm_sec) | 0x80;
+
+        if (tm->tm_min != -1)
+                fm3130->regs[FM3130_ALARM_MINUTES] =
+                        BIN2BCD(tm->tm_min) | 0x80;
+
+        if (tm->tm_hour != -1)
+                fm3130->regs[FM3130_ALARM_HOURS] =
+                        BIN2BCD(tm->tm_hour) | 0x80;
+
+        if (tm->tm_mday != -1)
+                fm3130->regs[FM3130_ALARM_DATE] =
+                        BIN2BCD(tm->tm_mday) | 0x80;
+
+        if (tm->tm_mon != -1)
+                fm3130->regs[FM3130_ALARM_MONTHS] =
+                        BIN2BCD(tm->tm_mon + 1) | 0x80;
+
+        dev_dbg(dev, "alarm write %02x %02x %02x %02x %02x\n",
+                        fm3130->regs[FM3130_ALARM_SECONDS],
+                        fm3130->regs[FM3130_ALARM_MINUTES],
+                        fm3130->regs[FM3130_ALARM_HOURS],
+                        fm3130->regs[FM3130_ALARM_DATE],
+                        fm3130->regs[FM3130_ALARM_MONTHS]);
+        /* Writing time registers, we don't support multibyte transfers */
+        for (i = 0; i < FM3130_ALARM_REGS; i++) {
+                i2c_smbus_write_byte_data(fm3130->client,
+                                        FM3130_ALARM_SECONDS + i,
+                                        fm3130->regs[FM3130_ALARM_SECONDS + i]);
+        }
+        fm3130->regs[FM3130_RTC_CONTROL] =
+                i2c_smbus_read_byte_data(fm3130->client, FM3130_RTC_CONTROL);
+        /* Checking for alarm */
+        if (fm3130->regs[FM3130_RTC_CONTROL] & FM3130_RTC_CONTROL_BIT_AF) {
+                fm3130->alarm = 1;
+                fm3130->regs[FM3130_RTC_CONTROL] &= ~FM3130_RTC_CONTROL_BIT_AF;
+        }
+        if (alrm->enabled) {
+                i2c_smbus_write_byte_data(fm3130->client, FM3130_RTC_CONTROL,
+                        (fm3130->regs[FM3130_RTC_CONTROL] &
+                                ~(FM3130_RTC_CONTROL_BIT_CAL)) |
+                                        FM3130_RTC_CONTROL_BIT_AEN);
+        } else {
+                i2c_smbus_write_byte_data(fm3130->client, FM3130_RTC_CONTROL,
+                        fm3130->regs[FM3130_RTC_CONTROL] &
+                                ~(FM3130_RTC_CONTROL_BIT_AEN));
+        }
+        return 0;
+}
+
+static const struct rtc_class_ops fm3130_rtc_ops = {
+        .read_time      = fm3130_get_time,
+        .set_time       = fm3130_set_time,
+        .read_alarm     = fm3130_read_alarm,
+        .set_alarm      = fm3130_set_alarm,
+};
+
+static struct i2c_driver fm3130_driver;
+
+static int __devinit fm3130_probe(struct i2c_client *client,
+                                  const struct i2c_device_id *id)
+{
+        struct fm3130           *fm3130;
+        int                     err = -ENODEV;
+        int                     tmp;
+        struct i2c_adapter      *adapter = to_i2c_adapter(client->dev.parent);
+
+        if (!i2c_check_functionality(adapter,
+                        I2C_FUNC_I2C | I2C_FUNC_SMBUS_WRITE_BYTE_DATA))
+                return -EIO;
+
+        fm3130 = kzalloc(sizeof(struct fm3130), GFP_KERNEL);
+
+        if (!fm3130)
+                return -ENOMEM;
+
+        fm3130->client = client;
+        i2c_set_clientdata(client, fm3130);
+        fm3130->reg_addr_time = FM3130_RTC_SECONDS;
+        fm3130->reg_addr_alarm = FM3130_ALARM_SECONDS;
+
+        /* Messages to read time */
+        fm3130->msg[0].addr = client->addr;
+        fm3130->msg[0].flags = 0;
+        fm3130->msg[0].len = 1;
+        fm3130->msg[0].buf = &fm3130->reg_addr_time;
+
+        fm3130->msg[1].addr = client->addr;
+        fm3130->msg[1].flags = I2C_M_RD;
+        fm3130->msg[1].len = FM3130_CLOCK_REGS;
+        fm3130->msg[1].buf = &fm3130->regs[FM3130_RTC_SECONDS];
+
+        /* Messages to read alarm */
+        fm3130->msg[2].addr = client->addr;
+        fm3130->msg[2].flags = 0;
+        fm3130->msg[2].len = 1;
+        fm3130->msg[2].buf = &fm3130->reg_addr_alarm;
+
+        fm3130->msg[3].addr = client->addr;
+        fm3130->msg[3].flags = I2C_M_RD;
+        fm3130->msg[3].len = FM3130_ALARM_REGS;
+        fm3130->msg[3].buf = &fm3130->regs[FM3130_ALARM_SECONDS];
+
+        fm3130->data_valid = 0;
+
+        tmp = i2c_transfer(adapter, fm3130->msg, 4);
+        if (tmp != 4) {
+                pr_debug("read error %d\n", tmp);
+                err = -EIO;
+                goto exit_free;
+        }
+
+        fm3130->regs[FM3130_RTC_CONTROL] =
+                i2c_smbus_read_byte_data(client, FM3130_RTC_CONTROL);
+        fm3130->regs[FM3130_CAL_CONTROL] =
+                i2c_smbus_read_byte_data(client, FM3130_CAL_CONTROL);
+
+        /* Checking for alarm */
+        if (fm3130->regs[FM3130_RTC_CONTROL] & FM3130_RTC_CONTROL_BIT_AF) {
+                fm3130->alarm = 1;
+                fm3130->regs[FM3130_RTC_CONTROL] &= ~FM3130_RTC_CONTROL_BIT_AF;
+        }
+
+        /* Disabling calibration mode */
+        if (fm3130->regs[FM3130_RTC_CONTROL] & FM3130_RTC_CONTROL_BIT_CAL)
+                i2c_smbus_write_byte_data(client, FM3130_RTC_CONTROL,
+                        fm3130->regs[FM3130_RTC_CONTROL] &
+                                ~(FM3130_RTC_CONTROL_BIT_CAL));
+                dev_warn(&client->dev, "Disabling calibration mode!\n");
+
+        /* Disabling read and write modes */
+        if (fm3130->regs[FM3130_RTC_CONTROL] & FM3130_RTC_CONTROL_BIT_WRITE ||
+            fm3130->regs[FM3130_RTC_CONTROL] & FM3130_RTC_CONTROL_BIT_READ)
+                i2c_smbus_write_byte_data(client, FM3130_RTC_CONTROL,
+                        fm3130->regs[FM3130_RTC_CONTROL] &
+                                ~(FM3130_RTC_CONTROL_BIT_READ |
+                                        FM3130_RTC_CONTROL_BIT_WRITE));
+                dev_warn(&client->dev, "Disabling READ or WRITE mode!\n");
+
+        /* oscillator off?  turn it on, so clock can tick. */
+        if (fm3130->regs[FM3130_CAL_CONTROL] & FM3130_CAL_CONTROL_BIT_nOSCEN)
+                i2c_smbus_write_byte_data(client, FM3130_CAL_CONTROL,
+                        fm3130->regs[FM3130_CAL_CONTROL] &
+                                ~(FM3130_CAL_CONTROL_BIT_nOSCEN));
+
+        /* oscillator fault?  clear flag, and warn */
+        if (fm3130->regs[FM3130_RTC_CONTROL] & FM3130_RTC_CONTROL_BIT_LB)
+                dev_warn(&client->dev, "Low battery!\n");
+
+        /* oscillator fault?  clear flag, and warn */
+        if (fm3130->regs[FM3130_RTC_CONTROL] & FM3130_RTC_CONTROL_BIT_POR) {
+                i2c_smbus_write_byte_data(client, FM3130_RTC_CONTROL,
+                        fm3130->regs[FM3130_RTC_CONTROL] &
+                                ~FM3130_RTC_CONTROL_BIT_POR);
+                dev_warn(&client->dev, "SET TIME!\n");
+        }
+        /* ACS is controlled by alarm */
+        i2c_smbus_write_byte_data(client, FM3130_ALARM_WP_CONTROL, 0x80);
+
+        /* TODO */
+        /* TODO need to sanity check alarm */
+        tmp = fm3130->regs[FM3130_RTC_SECONDS];
+        tmp = BCD2BIN(tmp & 0x7f);
+        if (tmp > 60)
+                goto exit_bad;
+        tmp = BCD2BIN(fm3130->regs[FM3130_RTC_MINUTES] & 0x7f);
+        if (tmp > 60)
+                goto exit_bad;
+
+        tmp = BCD2BIN(fm3130->regs[FM3130_RTC_DATE] & 0x3f);
+        if (tmp == 0 || tmp > 31)
+                goto exit_bad;
+
+        tmp = BCD2BIN(fm3130->regs[FM3130_RTC_MONTHS] & 0x1f);
+        if (tmp == 0 || tmp > 12)
+                goto exit_bad;
+
+        tmp = fm3130->regs[FM3130_RTC_HOURS];
+
+        fm3130->data_valid = 1;
+
+exit_bad:
+        if (!fm3130->data_valid)
+                dev_dbg(&client->dev,
+                                "%s: %02x %02x %02x %02x %02x %02x %02x %02x"
+                                "%02x %02x %02x %02x %02x %02x %02x\n",
+                        "bogus registers",
+                        fm3130->regs[0], fm3130->regs[1],
+                        fm3130->regs[2], fm3130->regs[3],
+                        fm3130->regs[4], fm3130->regs[5],
+                        fm3130->regs[6], fm3130->regs[7],
+                        fm3130->regs[8], fm3130->regs[9],
+                        fm3130->regs[0xa], fm3130->regs[0xb],
+                        fm3130->regs[0xc], fm3130->regs[0xd],
+                        fm3130->regs[0xe]);
+
+        /* We won't bail out here because we just got invalid data.
+           Time setting from u-boot doesn't work anyway */
+        fm3130->rtc = rtc_device_register(client->name, &client->dev,
+                                &fm3130_rtc_ops, THIS_MODULE);
+        if (IS_ERR(fm3130->rtc)) {
+                err = PTR_ERR(fm3130->rtc);
+                dev_err(&client->dev,
+                        "unable to register the class device\n");
+                goto exit_free;
+        }
+        return 0;
+exit_free:
+        kfree(fm3130);
+        return err;
+}
+
+static int __devexit fm3130_remove(struct i2c_client *client)
+{
+        struct fm3130 *fm3130 = i2c_get_clientdata(client);
+
+        rtc_device_unregister(fm3130->rtc);
+        kfree(fm3130);
+        return 0;
+}
+
+static struct i2c_driver fm3130_driver = {
+        .driver = {
+                .name   = "rtc-fm3130",
+                .owner  = THIS_MODULE,
+        },
+        .probe          = fm3130_probe,
+        .remove         = __devexit_p(fm3130_remove),
+        .id_table       = fm3130_id,
+};
+
+static int __init fm3130_init(void)
+{
+        return i2c_add_driver(&fm3130_driver);
+}
+module_init(fm3130_init);
+
+static void __exit fm3130_exit(void)
+{
+        i2c_del_driver(&fm3130_driver);
+}
+module_exit(fm3130_exit);
+
+MODULE_DESCRIPTION("RTC driver for FM3130");
+MODULE_AUTHOR("Sergey Lapin <slapin@ossfans.org>");
+MODULE_LICENSE("GPL");
+