rtc-bfin: fix state restoration when resuming

Much (but not all) of the RTC state is kept in the RTC peripheral which
has its own power domain.  Periodically (1 HZ), that state is synced from
one power domain to the other (peripheral->core).  When we are resuming,
we need to wait for the sync to occur so that we don't get a mismatch of
reading undefined state in the rest of the driver.

Further, once the externally maintained bits have been synced back into
the core, we then need to restore the bits maintained in the core.  In our
particular case, that is just the write completion interrupt bit.

If we don't do any of this, working with the RTC causes ~5 second delays
from time to time after waking up due to the write completion interrupt
never firing.

Reported-by: Michael Dean <mdean@aeronix.com>
Reported-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Acked-by: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

1 files changed, 11 insertions, 2 deletions

diff --git a/drivers/rtc/rtc-bfin.c b/drivers/rtc/rtc-bfin.c
index 65facfbe70fb..d4fb82d85e9b 100644
--- a/drivers/rtc/rtc-bfin.c
+++ b/drivers/rtc/rtc-bfin.c
@@ -435,8 +435,17 @@ static int bfin_rtc_resume(struct platform_device *pdev)
 {
         if (device_may_wakeup(&pdev->dev))
                 disable_irq_wake(IRQ_RTC);
-        else
-                bfin_write_RTC_ISTAT(-1);
+
+        /*
+         * Since only some of the RTC bits are maintained externally in the
+         * Vbat domain, we need to wait for the RTC MMRs to be synced into
+         * the core after waking up.  This happens every RTC 1HZ.  Once that
+         * has happened, we can go ahead and re-enable the important write
+         * complete interrupt event.
+         */
+        while (!(bfin_read_RTC_ISTAT() & RTC_ISTAT_SEC))
+                continue;
+        bfin_rtc_int_set(RTC_ISTAT_WRITE_COMPLETE);
 
         return 0;
 }