rtc: add support for spear rtc

Signed-off-by: Rajeev Kumar <rajeev-dlh.kumar@st.com>
Signed-off-by: Viresh Kumar <viresh.kumar@st.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

3 files changed, 543 insertions, 0 deletions

diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
index 0a69ed9fb454..f822e13dc04b 100644
--- a/drivers/rtc/Kconfig
+++ b/drivers/rtc/Kconfig
@@ -682,6 +682,14 @@ config RTC_DRV_WM8350
           This driver can also be built as a module. If so, the module
           will be called "rtc-wm8350".
 
+config RTC_DRV_SPEAR
+        tristate "SPEAR ST RTC"
+        depends on PLAT_SPEAR
+        default y
+        help
+         If you say Y here you will get support for the RTC found on
+         spear
+
 config RTC_DRV_PCF50633
         depends on MFD_PCF50633
         tristate "NXP PCF50633 RTC"
diff --git a/drivers/rtc/Makefile b/drivers/rtc/Makefile
index 8a9b2490c9ed..213d725f16d4 100644
--- a/drivers/rtc/Makefile
+++ b/drivers/rtc/Makefile
@@ -91,6 +91,7 @@ obj-$(CONFIG_RTC_DRV_S35390A)	+= rtc-s35390a.o
 obj-$(CONFIG_RTC_DRV_S3C)       += rtc-s3c.o
 obj-$(CONFIG_RTC_DRV_SA1100)    += rtc-sa1100.o
 obj-$(CONFIG_RTC_DRV_SH)        += rtc-sh.o
+obj-$(CONFIG_RTC_DRV_SPEAR)     += rtc-spear.o
 obj-$(CONFIG_RTC_DRV_STARFIRE)  += rtc-starfire.o
 obj-$(CONFIG_RTC_DRV_STK17TA8)  += rtc-stk17ta8.o
 obj-$(CONFIG_RTC_DRV_STMP)      += rtc-stmp3xxx.o
diff --git a/drivers/rtc/rtc-spear.c b/drivers/rtc/rtc-spear.c
new file mode 100644
index 000000000000..893bac2bb21b
--- /dev/null
+++ b/drivers/rtc/rtc-spear.c
@@ -0,0 +1,534 @@
+/*
+ * drivers/rtc/rtc-spear.c
+ *
+ * Copyright (C) 2010 ST Microelectronics
+ * Rajeev Kumar<rajeev-dlh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/bcd.h>
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/rtc.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+
+/* RTC registers */
+#define TIME_REG                0x00
+#define DATE_REG                0x04
+#define ALARM_TIME_REG          0x08
+#define ALARM_DATE_REG          0x0C
+#define CTRL_REG                0x10
+#define STATUS_REG              0x14
+
+/* TIME_REG & ALARM_TIME_REG */
+#define SECONDS_UNITS           (0xf<<0)        /* seconds units position */
+#define SECONDS_TENS            (0x7<<4)        /* seconds tens position */
+#define MINUTES_UNITS           (0xf<<8)        /* minutes units position */
+#define MINUTES_TENS            (0x7<<12)       /* minutes tens position */
+#define HOURS_UNITS             (0xf<<16)       /* hours units position */
+#define HOURS_TENS              (0x3<<20)       /* hours tens position */
+
+/* DATE_REG & ALARM_DATE_REG */
+#define DAYS_UNITS              (0xf<<0)        /* days units position */
+#define DAYS_TENS               (0x3<<4)        /* days tens position */
+#define MONTHS_UNITS            (0xf<<8)        /* months units position */
+#define MONTHS_TENS             (0x1<<12)       /* months tens position */
+#define YEARS_UNITS             (0xf<<16)       /* years units position */
+#define YEARS_TENS              (0xf<<20)       /* years tens position */
+#define YEARS_HUNDREDS          (0xf<<24)       /* years hundereds position */
+#define YEARS_MILLENIUMS        (0xf<<28)       /* years millenium position */
+
+/* MASK SHIFT TIME_REG & ALARM_TIME_REG*/
+#define SECOND_SHIFT            0x00            /* seconds units */
+#define MINUTE_SHIFT            0x08            /* minutes units position */
+#define HOUR_SHIFT              0x10            /* hours units position */
+#define MDAY_SHIFT              0x00            /* Month day shift */
+#define MONTH_SHIFT             0x08            /* Month shift */
+#define YEAR_SHIFT              0x10            /* Year shift */
+
+#define SECOND_MASK             0x7F
+#define MIN_MASK                0x7F
+#define HOUR_MASK               0x3F
+#define DAY_MASK                0x3F
+#define MONTH_MASK              0x7F
+#define YEAR_MASK               0xFFFF
+
+/* date reg equal to time reg, for debug only */
+#define TIME_BYP                (1<<9)
+#define INT_ENABLE              (1<<31)         /* interrupt enable */
+
+/* STATUS_REG */
+#define CLK_UNCONNECTED         (1<<0)
+#define PEND_WR_TIME            (1<<2)
+#define PEND_WR_DATE            (1<<3)
+#define LOST_WR_TIME            (1<<4)
+#define LOST_WR_DATE            (1<<5)
+#define RTC_INT_MASK            (1<<31)
+#define STATUS_BUSY             (PEND_WR_TIME | PEND_WR_DATE)
+#define STATUS_FAIL             (LOST_WR_TIME | LOST_WR_DATE)
+
+struct spear_rtc_config {
+        struct clk *clk;
+        spinlock_t lock;
+        void __iomem *ioaddr;
+};
+
+static inline void spear_rtc_clear_interrupt(struct spear_rtc_config *config)
+{
+        unsigned int val;
+        unsigned long flags;
+
+        spin_lock_irqsave(&config->lock, flags);
+        val = readl(config->ioaddr + STATUS_REG);
+        val |= RTC_INT_MASK;
+        writel(val, config->ioaddr + STATUS_REG);
+        spin_unlock_irqrestore(&config->lock, flags);
+}
+
+static inline void spear_rtc_enable_interrupt(struct spear_rtc_config *config)
+{
+        unsigned int val;
+
+        val = readl(config->ioaddr + CTRL_REG);
+        if (!(val & INT_ENABLE)) {
+                spear_rtc_clear_interrupt(config);
+                val |= INT_ENABLE;
+                writel(val, config->ioaddr + CTRL_REG);
+        }
+}
+
+static inline void spear_rtc_disable_interrupt(struct spear_rtc_config *config)
+{
+        unsigned int val;
+
+        val = readl(config->ioaddr + CTRL_REG);
+        if (val & INT_ENABLE) {
+                val &= ~INT_ENABLE;
+                writel(val, config->ioaddr + CTRL_REG);
+        }
+}
+
+static inline int is_write_complete(struct spear_rtc_config *config)
+{
+        int ret = 0;
+        unsigned long flags;
+
+        spin_lock_irqsave(&config->lock, flags);
+        if ((readl(config->ioaddr + STATUS_REG)) & STATUS_FAIL)
+                ret = -EIO;
+        spin_unlock_irqrestore(&config->lock, flags);
+
+        return ret;
+}
+
+static void rtc_wait_not_busy(struct spear_rtc_config *config)
+{
+        int status, count = 0;
+        unsigned long flags;
+
+        /* Assuming BUSY may stay active for 80 msec) */
+        for (count = 0; count < 80; count++) {
+                spin_lock_irqsave(&config->lock, flags);
+                status = readl(config->ioaddr + STATUS_REG);
+                spin_unlock_irqrestore(&config->lock, flags);
+                if ((status & STATUS_BUSY) == 0)
+                        break;
+                /* check status busy, after each msec */
+                msleep(1);
+        }
+}
+
+static irqreturn_t spear_rtc_irq(int irq, void *dev_id)
+{
+        struct rtc_device *rtc = (struct rtc_device *)dev_id;
+        struct spear_rtc_config *config = dev_get_drvdata(&rtc->dev);
+        unsigned long flags, events = 0;
+        unsigned int irq_data;
+
+        spin_lock_irqsave(&config->lock, flags);
+        irq_data = readl(config->ioaddr + STATUS_REG);
+        spin_unlock_irqrestore(&config->lock, flags);
+
+        if ((irq_data & RTC_INT_MASK)) {
+                spear_rtc_clear_interrupt(config);
+                events = RTC_IRQF | RTC_AF;
+                rtc_update_irq(rtc, 1, events);
+                return IRQ_HANDLED;
+        } else
+                return IRQ_NONE;
+
+}
+
+static int tm2bcd(struct rtc_time *tm)
+{
+        if (rtc_valid_tm(tm) != 0)
+                return -EINVAL;
+        tm->tm_sec = bin2bcd(tm->tm_sec);
+        tm->tm_min = bin2bcd(tm->tm_min);
+        tm->tm_hour = bin2bcd(tm->tm_hour);
+        tm->tm_mday = bin2bcd(tm->tm_mday);
+        tm->tm_mon = bin2bcd(tm->tm_mon + 1);
+        tm->tm_year = bin2bcd(tm->tm_year);
+
+        return 0;
+}
+
+static void bcd2tm(struct rtc_time *tm)
+{
+        tm->tm_sec = bcd2bin(tm->tm_sec);
+        tm->tm_min = bcd2bin(tm->tm_min);
+        tm->tm_hour = bcd2bin(tm->tm_hour);
+        tm->tm_mday = bcd2bin(tm->tm_mday);
+        tm->tm_mon = bcd2bin(tm->tm_mon) - 1;
+        /* epoch == 1900 */
+        tm->tm_year = bcd2bin(tm->tm_year);
+}
+
+/*
+ * spear_rtc_read_time - set the time
+ * @dev: rtc device in use
+ * @tm: holds date and time
+ *
+ * This function read time and date. On success it will return 0
+ * otherwise -ve error is returned.
+ */
+static int spear_rtc_read_time(struct device *dev, struct rtc_time *tm)
+{
+        struct platform_device *pdev = to_platform_device(dev);
+        struct rtc_device *rtc = platform_get_drvdata(pdev);
+        struct spear_rtc_config *config = dev_get_drvdata(&rtc->dev);
+        unsigned int time, date;
+
+        /* we don't report wday/yday/isdst ... */
+        rtc_wait_not_busy(config);
+
+        time = readl(config->ioaddr + TIME_REG);
+        date = readl(config->ioaddr + DATE_REG);
+        tm->tm_sec = (time >> SECOND_SHIFT) & SECOND_MASK;
+        tm->tm_min = (time >> MINUTE_SHIFT) & MIN_MASK;
+        tm->tm_hour = (time >> HOUR_SHIFT) & HOUR_MASK;
+        tm->tm_mday = (date >> MDAY_SHIFT) & DAY_MASK;
+        tm->tm_mon = (date >> MONTH_SHIFT) & MONTH_MASK;
+        tm->tm_year = (date >> YEAR_SHIFT) & YEAR_MASK;
+
+        bcd2tm(tm);
+        return 0;
+}
+
+/*
+ * spear_rtc_set_time - set the time
+ * @dev: rtc device in use
+ * @tm: holds date and time
+ *
+ * This function set time and date. On success it will return 0
+ * otherwise -ve error is returned.
+ */
+static int spear_rtc_set_time(struct device *dev, struct rtc_time *tm)
+{
+        struct platform_device *pdev = to_platform_device(dev);
+        struct rtc_device *rtc = platform_get_drvdata(pdev);
+        struct spear_rtc_config *config = dev_get_drvdata(&rtc->dev);
+        unsigned int time, date, err = 0;
+
+        if (tm2bcd(tm) < 0)
+                return -EINVAL;
+
+        rtc_wait_not_busy(config);
+        time = (tm->tm_sec << SECOND_SHIFT) | (tm->tm_min << MINUTE_SHIFT) |
+                (tm->tm_hour << HOUR_SHIFT);
+        date = (tm->tm_mday << MDAY_SHIFT) | (tm->tm_mon << MONTH_SHIFT) |
+                (tm->tm_year << YEAR_SHIFT);
+        writel(time, config->ioaddr + TIME_REG);
+        writel(date, config->ioaddr + DATE_REG);
+        err = is_write_complete(config);
+        if (err < 0)
+                return err;
+
+        return 0;
+}
+
+/*
+ * spear_rtc_read_alarm - read the alarm time
+ * @dev: rtc device in use
+ * @alm: holds alarm date and time
+ *
+ * This function read alarm time and date. On success it will return 0
+ * otherwise -ve error is returned.
+ */
+static int spear_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alm)
+{
+        struct platform_device *pdev = to_platform_device(dev);
+        struct rtc_device *rtc = platform_get_drvdata(pdev);
+        struct spear_rtc_config *config = dev_get_drvdata(&rtc->dev);
+        unsigned int time, date;
+
+        rtc_wait_not_busy(config);
+
+        time = readl(config->ioaddr + ALARM_TIME_REG);
+        date = readl(config->ioaddr + ALARM_DATE_REG);
+        alm->time.tm_sec = (time >> SECOND_SHIFT) & SECOND_MASK;
+        alm->time.tm_min = (time >> MINUTE_SHIFT) & MIN_MASK;
+        alm->time.tm_hour = (time >> HOUR_SHIFT) & HOUR_MASK;
+        alm->time.tm_mday = (date >> MDAY_SHIFT) & DAY_MASK;
+        alm->time.tm_mon = (date >> MONTH_SHIFT) & MONTH_MASK;
+        alm->time.tm_year = (date >> YEAR_SHIFT) & YEAR_MASK;
+
+        bcd2tm(&alm->time);
+        alm->enabled = readl(config->ioaddr + CTRL_REG) & INT_ENABLE;
+
+        return 0;
+}
+
+/*
+ * spear_rtc_set_alarm - set the alarm time
+ * @dev: rtc device in use
+ * @alm: holds alarm date and time
+ *
+ * This function set alarm time and date. On success it will return 0
+ * otherwise -ve error is returned.
+ */
+static int spear_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alm)
+{
+        struct platform_device *pdev = to_platform_device(dev);
+        struct rtc_device *rtc = platform_get_drvdata(pdev);
+        struct spear_rtc_config *config = dev_get_drvdata(&rtc->dev);
+        unsigned int time, date, err = 0;
+
+        if (tm2bcd(&alm->time) < 0)
+                return -EINVAL;
+
+        rtc_wait_not_busy(config);
+
+        time = (alm->time.tm_sec << SECOND_SHIFT) | (alm->time.tm_min <<
+                        MINUTE_SHIFT) | (alm->time.tm_hour << HOUR_SHIFT);
+        date = (alm->time.tm_mday << MDAY_SHIFT) | (alm->time.tm_mon <<
+                        MONTH_SHIFT) | (alm->time.tm_year << YEAR_SHIFT);
+
+        writel(time, config->ioaddr + ALARM_TIME_REG);
+        writel(date, config->ioaddr + ALARM_DATE_REG);
+        err = is_write_complete(config);
+        if (err < 0)
+                return err;
+
+        if (alm->enabled)
+                spear_rtc_enable_interrupt(config);
+        else
+                spear_rtc_disable_interrupt(config);
+
+        return 0;
+}
+static struct rtc_class_ops spear_rtc_ops = {
+        .read_time = spear_rtc_read_time,
+        .set_time = spear_rtc_set_time,
+        .read_alarm = spear_rtc_read_alarm,
+        .set_alarm = spear_rtc_set_alarm,
+};
+
+static int __devinit spear_rtc_probe(struct platform_device *pdev)
+{
+        struct resource *res;
+        struct rtc_device *rtc;
+        struct spear_rtc_config *config;
+        unsigned int status = 0;
+        int irq;
+
+        res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+        if (!res) {
+                dev_err(&pdev->dev, "no resource defined\n");
+                return -EBUSY;
+        }
+        if (!request_mem_region(res->start, resource_size(res), pdev->name)) {
+                dev_err(&pdev->dev, "rtc region already claimed\n");
+                return -EBUSY;
+        }
+
+        config = kzalloc(sizeof(*config), GFP_KERNEL);
+        if (!config) {
+                dev_err(&pdev->dev, "out of memory\n");
+                status = -ENOMEM;
+                goto err_release_region;
+        }
+
+        config->clk = clk_get(&pdev->dev, NULL);
+        if (IS_ERR(config->clk)) {
+                status = PTR_ERR(config->clk);
+                goto err_kfree;
+        }
+
+        status = clk_enable(config->clk);
+        if (status < 0)
+                goto err_clk_put;
+
+        config->ioaddr = ioremap(res->start, resource_size(res));
+        if (!config->ioaddr) {
+                dev_err(&pdev->dev, "ioremap fail\n");
+                status = -ENOMEM;
+                goto err_disable_clock;
+        }
+
+        spin_lock_init(&config->lock);
+
+        rtc = rtc_device_register(pdev->name, &pdev->dev, &spear_rtc_ops,
+                        THIS_MODULE);
+        if (IS_ERR(rtc)) {
+                dev_err(&pdev->dev, "can't register RTC device, err %ld\n",
+                                PTR_ERR(rtc));
+                status = PTR_ERR(rtc);
+                goto err_iounmap;
+        }
+
+        platform_set_drvdata(pdev, rtc);
+        dev_set_drvdata(&rtc->dev, config);
+
+        /* alarm irqs */
+        irq = platform_get_irq(pdev, 0);
+        if (irq < 0) {
+                dev_err(&pdev->dev, "no update irq?\n");
+                status = irq;
+                goto err_clear_platdata;
+        }
+
+        status = request_irq(irq, spear_rtc_irq, 0, pdev->name, rtc);
+        if (status) {
+                dev_err(&pdev->dev, "Alarm interrupt IRQ%d already \
+                                claimed\n", irq);
+                goto err_clear_platdata;
+        }
+
+        if (!device_can_wakeup(&pdev->dev))
+                device_init_wakeup(&pdev->dev, 1);
+
+        return 0;
+
+err_clear_platdata:
+        platform_set_drvdata(pdev, NULL);
+        dev_set_drvdata(&rtc->dev, NULL);
+        rtc_device_unregister(rtc);
+err_iounmap:
+        iounmap(config->ioaddr);
+err_disable_clock:
+        clk_disable(config->clk);
+err_clk_put:
+        clk_put(config->clk);
+err_kfree:
+        kfree(config);
+err_release_region:
+        release_mem_region(res->start, resource_size(res));
+
+        return status;
+}
+
+static int __devexit spear_rtc_remove(struct platform_device *pdev)
+{
+        struct rtc_device *rtc = platform_get_drvdata(pdev);
+        struct spear_rtc_config *config = dev_get_drvdata(&rtc->dev);
+        int irq;
+        struct resource *res;
+
+        /* leave rtc running, but disable irqs */
+        spear_rtc_disable_interrupt(config);
+        device_init_wakeup(&pdev->dev, 0);
+        irq = platform_get_irq(pdev, 0);
+        if (irq)
+                free_irq(irq, pdev);
+        clk_disable(config->clk);
+        clk_put(config->clk);
+        iounmap(config->ioaddr);
+        kfree(config);
+        res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+        if (res)
+                release_mem_region(res->start, resource_size(res));
+        platform_set_drvdata(pdev, NULL);
+        dev_set_drvdata(&rtc->dev, NULL);
+        rtc_device_unregister(rtc);
+
+        return 0;
+}
+
+#ifdef CONFIG_PM
+
+static int spear_rtc_suspend(struct platform_device *pdev, pm_message_t state)
+{
+        struct rtc_device *rtc = platform_get_drvdata(pdev);
+        struct spear_rtc_config *config = dev_get_drvdata(&rtc->dev);
+        int irq;
+
+        irq = platform_get_irq(pdev, 0);
+        if (device_may_wakeup(&pdev->dev))
+                enable_irq_wake(irq);
+        else {
+                spear_rtc_disable_interrupt(config);
+                clk_disable(config->clk);
+        }
+
+        return 0;
+}
+
+static int spear_rtc_resume(struct platform_device *pdev)
+{
+        struct rtc_device *rtc = platform_get_drvdata(pdev);
+        struct spear_rtc_config *config = dev_get_drvdata(&rtc->dev);
+        int irq;
+
+        irq = platform_get_irq(pdev, 0);
+
+        if (device_may_wakeup(&pdev->dev))
+                disable_irq_wake(irq);
+        else {
+                clk_enable(config->clk);
+                spear_rtc_enable_interrupt(config);
+        }
+
+        return 0;
+}
+
+#else
+#define spear_rtc_suspend       NULL
+#define spear_rtc_resume        NULL
+#endif
+
+static void spear_rtc_shutdown(struct platform_device *pdev)
+{
+        struct rtc_device *rtc = platform_get_drvdata(pdev);
+        struct spear_rtc_config *config = dev_get_drvdata(&rtc->dev);
+
+        spear_rtc_disable_interrupt(config);
+        clk_disable(config->clk);
+}
+
+static struct platform_driver spear_rtc_driver = {
+        .probe = spear_rtc_probe,
+        .remove = __devexit_p(spear_rtc_remove),
+        .suspend = spear_rtc_suspend,
+        .resume = spear_rtc_resume,
+        .shutdown = spear_rtc_shutdown,
+        .driver = {
+                .name = "rtc-spear",
+        },
+};
+
+static int __init rtc_init(void)
+{
+        return platform_driver_register(&spear_rtc_driver);
+}
+module_init(rtc_init);
+
+static void __exit rtc_exit(void)
+{
+        platform_driver_unregister(&spear_rtc_driver);
+}
+module_exit(rtc_exit);
+
+MODULE_ALIAS("platform:rtc-spear");
+MODULE_AUTHOR("Rajeev Kumar <rajeev-dlh.kumar@st.com>");
+MODULE_DESCRIPTION("ST SPEAr Realtime Clock Driver (RTC)");
+MODULE_LICENSE("GPL");