rtc: Add twl6030 RTC support

This patch adds support for RTC in phoenix TWL6030.
Register offset addresses have changed in TWL6030
rtc-twl.c will hence forth support all twl RTC (4030, 5030, 6030 ..)

Signed-off-by: Balaji T K <balajitk@ti.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Reviewed-by: Tony Lindgren <tony@atomide.com>
Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

1 files changed, 111 insertions, 41 deletions

diff --git a/drivers/rtc/rtc-twl.c b/drivers/rtc/rtc-twl.c
index 7cea920ff6ac..c6a83a2a722c 100644
--- a/drivers/rtc/rtc-twl.c
+++ b/drivers/rtc/rtc-twl.c
@@ -34,27 +34,75 @@
 /*
  * RTC block register offsets (use TWL_MODULE_RTC)
  */
-#define REG_SECONDS_REG                          0x00
-#define REG_MINUTES_REG                          0x01
-#define REG_HOURS_REG                            0x02
-#define REG_DAYS_REG                             0x03
-#define REG_MONTHS_REG                           0x04
-#define REG_YEARS_REG                            0x05
-#define REG_WEEKS_REG                            0x06
-
-#define REG_ALARM_SECONDS_REG                    0x07
-#define REG_ALARM_MINUTES_REG                    0x08
-#define REG_ALARM_HOURS_REG                      0x09
-#define REG_ALARM_DAYS_REG                       0x0A
-#define REG_ALARM_MONTHS_REG                     0x0B
-#define REG_ALARM_YEARS_REG                      0x0C
-
-#define REG_RTC_CTRL_REG                         0x0D
-#define REG_RTC_STATUS_REG                       0x0E
-#define REG_RTC_INTERRUPTS_REG                   0x0F
-
-#define REG_RTC_COMP_LSB_REG                     0x10
-#define REG_RTC_COMP_MSB_REG                     0x11
+enum {
+        REG_SECONDS_REG = 0,
+        REG_MINUTES_REG,
+        REG_HOURS_REG,
+        REG_DAYS_REG,
+        REG_MONTHS_REG,
+        REG_YEARS_REG,
+        REG_WEEKS_REG,
+
+        REG_ALARM_SECONDS_REG,
+        REG_ALARM_MINUTES_REG,
+        REG_ALARM_HOURS_REG,
+        REG_ALARM_DAYS_REG,
+        REG_ALARM_MONTHS_REG,
+        REG_ALARM_YEARS_REG,
+
+        REG_RTC_CTRL_REG,
+        REG_RTC_STATUS_REG,
+        REG_RTC_INTERRUPTS_REG,
+
+        REG_RTC_COMP_LSB_REG,
+        REG_RTC_COMP_MSB_REG,
+};
+const static u8 twl4030_rtc_reg_map[] = {
+        [REG_SECONDS_REG] = 0x00,
+        [REG_MINUTES_REG] = 0x01,
+        [REG_HOURS_REG] = 0x02,
+        [REG_DAYS_REG] = 0x03,
+        [REG_MONTHS_REG] = 0x04,
+        [REG_YEARS_REG] = 0x05,
+        [REG_WEEKS_REG] = 0x06,
+
+        [REG_ALARM_SECONDS_REG] = 0x07,
+        [REG_ALARM_MINUTES_REG] = 0x08,
+        [REG_ALARM_HOURS_REG] = 0x09,
+        [REG_ALARM_DAYS_REG] = 0x0A,
+        [REG_ALARM_MONTHS_REG] = 0x0B,
+        [REG_ALARM_YEARS_REG] = 0x0C,
+
+        [REG_RTC_CTRL_REG] = 0x0D,
+        [REG_RTC_STATUS_REG] = 0x0E,
+        [REG_RTC_INTERRUPTS_REG] = 0x0F,
+
+        [REG_RTC_COMP_LSB_REG] = 0x10,
+        [REG_RTC_COMP_MSB_REG] = 0x11,
+};
+const static u8 twl6030_rtc_reg_map[] = {
+        [REG_SECONDS_REG] = 0x00,
+        [REG_MINUTES_REG] = 0x01,
+        [REG_HOURS_REG] = 0x02,
+        [REG_DAYS_REG] = 0x03,
+        [REG_MONTHS_REG] = 0x04,
+        [REG_YEARS_REG] = 0x05,
+        [REG_WEEKS_REG] = 0x06,
+
+        [REG_ALARM_SECONDS_REG] = 0x08,
+        [REG_ALARM_MINUTES_REG] = 0x09,
+        [REG_ALARM_HOURS_REG] = 0x0A,
+        [REG_ALARM_DAYS_REG] = 0x0B,
+        [REG_ALARM_MONTHS_REG] = 0x0C,
+        [REG_ALARM_YEARS_REG] = 0x0D,
+
+        [REG_RTC_CTRL_REG] = 0x10,
+        [REG_RTC_STATUS_REG] = 0x11,
+        [REG_RTC_INTERRUPTS_REG] = 0x12,
+
+        [REG_RTC_COMP_LSB_REG] = 0x13,
+        [REG_RTC_COMP_MSB_REG] = 0x14,
+};
 
 /* RTC_CTRL_REG bitfields */
 #define BIT_RTC_CTRL_REG_STOP_RTC_M              0x01
@@ -84,6 +132,7 @@
 #define ALL_TIME_REGS           6
 
 /*----------------------------------------------------------------------*/
+static u8  *rtc_reg_map;
 
 /*
  * Supports 1 byte read from TWL RTC register.
@@ -92,7 +141,7 @@ static int twl_rtc_read_u8(u8 *data, u8 reg)
 {
         int ret;
 
-        ret = twl_i2c_read_u8(TWL_MODULE_RTC, data, reg);
+        ret = twl_i2c_read_u8(TWL_MODULE_RTC, data, (rtc_reg_map[reg]));
         if (ret < 0)
                 pr_err("twl_rtc: Could not read TWL"
                        "register %X - error %d\n", reg, ret);
@@ -106,7 +155,7 @@ static int twl_rtc_write_u8(u8 data, u8 reg)
 {
         int ret;
 
-        ret = twl_i2c_write_u8(TWL_MODULE_RTC, data, reg);
+        ret = twl_i2c_write_u8(TWL_MODULE_RTC, data, (rtc_reg_map[reg]));
         if (ret < 0)
                 pr_err("twl_rtc: Could not write TWL"
                        "register %X - error %d\n", reg, ret);
@@ -202,7 +251,7 @@ static int twl_rtc_read_time(struct device *dev, struct rtc_time *tm)
                 return ret;
 
         ret = twl_i2c_read(TWL_MODULE_RTC, rtc_data,
-                               REG_SECONDS_REG, ALL_TIME_REGS);
+                        (rtc_reg_map[REG_SECONDS_REG]), ALL_TIME_REGS);
 
         if (ret < 0) {
                 dev_err(dev, "rtc_read_time error %d\n", ret);
@@ -244,7 +293,7 @@ static int twl_rtc_set_time(struct device *dev, struct rtc_time *tm)
 
         /* update all the time registers in one shot */
         ret = twl_i2c_write(TWL_MODULE_RTC, rtc_data,
-                        REG_SECONDS_REG, ALL_TIME_REGS);
+                (rtc_reg_map[REG_SECONDS_REG]), ALL_TIME_REGS);
         if (ret < 0) {
                 dev_err(dev, "rtc_set_time error %d\n", ret);
                 goto out;
@@ -267,7 +316,7 @@ static int twl_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alm)
         int ret;
 
         ret = twl_i2c_read(TWL_MODULE_RTC, rtc_data,
-                               REG_ALARM_SECONDS_REG, ALL_TIME_REGS);
+                        (rtc_reg_map[REG_ALARM_SECONDS_REG]), ALL_TIME_REGS);
         if (ret < 0) {
                 dev_err(dev, "rtc_read_alarm error %d\n", ret);
                 return ret;
@@ -306,7 +355,7 @@ static int twl_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alm)
 
         /* update all the alarm registers in one shot */
         ret = twl_i2c_write(TWL_MODULE_RTC, alarm_data,
-                        REG_ALARM_SECONDS_REG, ALL_TIME_REGS);
+                (rtc_reg_map[REG_ALARM_SECONDS_REG]), ALL_TIME_REGS);
         if (ret) {
                 dev_err(dev, "rtc_set_alarm error %d\n", ret);
                 goto out;
@@ -352,21 +401,23 @@ static irqreturn_t twl_rtc_interrupt(int irq, void *rtc)
         if (res)
                 goto out;
 
-        /* Clear on Read enabled. RTC_IT bit of TWL4030_INT_PWR_ISR1
-         * needs 2 reads to clear the interrupt. One read is done in
-         * do_twl_pwrirq(). Doing the second read, to clear
-         * the bit.
-         *
-         * FIXME the reason PWR_ISR1 needs an extra read is that
-         * RTC_IF retriggered until we cleared REG_ALARM_M above.
-         * But re-reading like this is a bad hack; by doing so we
-         * risk wrongly clearing status for some other IRQ (losing
-         * the interrupt).  Be smarter about handling RTC_UF ...
-         */
-        res = twl_i2c_read_u8(TWL4030_MODULE_INT,
+        if (twl_class_is_4030()) {
+                /* Clear on Read enabled. RTC_IT bit of TWL4030_INT_PWR_ISR1
+                 * needs 2 reads to clear the interrupt. One read is done in
+                 * do_twl_pwrirq(). Doing the second read, to clear
+                 * the bit.
+                 *
+                 * FIXME the reason PWR_ISR1 needs an extra read is that
+                 * RTC_IF retriggered until we cleared REG_ALARM_M above.
+                 * But re-reading like this is a bad hack; by doing so we
+                 * risk wrongly clearing status for some other IRQ (losing
+                 * the interrupt).  Be smarter about handling RTC_UF ...
+                 */
+                res = twl_i2c_read_u8(TWL4030_MODULE_INT,
                         &rd_reg, TWL4030_INT_PWR_ISR1);
-        if (res)
-                goto out;
+                if (res)
+                        goto out;
+        }
 
         /* Notify RTC core on event */
         rtc_update_irq(rtc, 1, events);
@@ -432,6 +483,13 @@ static int __devinit twl_rtc_probe(struct platform_device *pdev)
                 goto out1;
         }
 
+        if (twl_class_is_6030()) {
+                twl6030_interrupt_unmask(TWL6030_RTC_INT_MASK,
+                        REG_INT_MSK_LINE_A);
+                twl6030_interrupt_unmask(TWL6030_RTC_INT_MASK,
+                        REG_INT_MSK_STS_A);
+        }
+
         /* Check RTC module status, Enable if it is off */
         ret = twl_rtc_read_u8(&rd_reg, REG_RTC_CTRL_REG);
         if (ret < 0)
@@ -472,6 +530,13 @@ static int __devexit twl_rtc_remove(struct platform_device *pdev)
 
         mask_rtc_irq_bit(BIT_RTC_INTERRUPTS_REG_IT_ALARM_M);
         mask_rtc_irq_bit(BIT_RTC_INTERRUPTS_REG_IT_TIMER_M);
+        if (twl_class_is_6030()) {
+                twl6030_interrupt_mask(TWL6030_RTC_INT_MASK,
+                        REG_INT_MSK_LINE_A);
+                twl6030_interrupt_mask(TWL6030_RTC_INT_MASK,
+                        REG_INT_MSK_STS_A);
+        }
+
 
         free_irq(irq, rtc);
 
@@ -526,6 +591,11 @@ static struct platform_driver twl4030rtc_driver = {
 
 static int __init twl_rtc_init(void)
 {
+        if (twl_class_is_4030())
+                rtc_reg_map = (u8 *) twl4030_rtc_reg_map;
+        else
+                rtc_reg_map = (u8 *) twl6030_rtc_reg_map;
+
         return platform_driver_register(&twl4030rtc_driver);
 }
 module_init(twl_rtc_init);