diff options
author | Wu, Bryan <bryan.wu@analog.com> | 2007-05-06 17:50:32 -0400 |
---|---|---|
committer | Linus Torvalds <torvalds@woody.linux-foundation.org> | 2007-05-07 15:12:58 -0400 |
commit | 8cc75c9a1498913d668b6d3559940c6837cee8bf (patch) | |
tree | 1eafc75f1f5481ed809959024edb64f83c96fdf2 /drivers/rtc/rtc-bfin.c | |
parent | 0851a2848cfd40012063ca9cf86fb67b7bebceff (diff) |
Blackfin: on-chip RTC controller driver
This patch implements the driver necessary use the Analog Devices Blackfin
processor's on-chip RTC controller.
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Diffstat (limited to 'drivers/rtc/rtc-bfin.c')
-rw-r--r-- | drivers/rtc/rtc-bfin.c | 445 |
1 files changed, 445 insertions, 0 deletions
diff --git a/drivers/rtc/rtc-bfin.c b/drivers/rtc/rtc-bfin.c new file mode 100644 index 000000000000..260ead959918 --- /dev/null +++ b/drivers/rtc/rtc-bfin.c | |||
@@ -0,0 +1,445 @@ | |||
1 | /* | ||
2 | * Blackfin On-Chip Real Time Clock Driver | ||
3 | * Supports BF531/BF532/BF533/BF534/BF536/BF537 | ||
4 | * | ||
5 | * Copyright 2004-2007 Analog Devices Inc. | ||
6 | * | ||
7 | * Enter bugs at http://blackfin.uclinux.org/ | ||
8 | * | ||
9 | * Licensed under the GPL-2 or later. | ||
10 | */ | ||
11 | |||
12 | /* The biggest issue we deal with in this driver is that register writes are | ||
13 | * synced to the RTC frequency of 1Hz. So if you write to a register and | ||
14 | * attempt to write again before the first write has completed, the new write | ||
15 | * is simply discarded. This can easily be troublesome if userspace disables | ||
16 | * one event (say periodic) and then right after enables an event (say alarm). | ||
17 | * Since all events are maintained in the same interrupt mask register, if | ||
18 | * we wrote to it to disable the first event and then wrote to it again to | ||
19 | * enable the second event, that second event would not be enabled as the | ||
20 | * write would be discarded and things quickly fall apart. | ||
21 | * | ||
22 | * To keep this delay from significantly degrading performance (we, in theory, | ||
23 | * would have to sleep for up to 1 second everytime we wanted to write a | ||
24 | * register), we only check the write pending status before we start to issue | ||
25 | * a new write. We bank on the idea that it doesnt matter when the sync | ||
26 | * happens so long as we don't attempt another write before it does. The only | ||
27 | * time userspace would take this penalty is when they try and do multiple | ||
28 | * operations right after another ... but in this case, they need to take the | ||
29 | * sync penalty, so we should be OK. | ||
30 | * | ||
31 | * Also note that the RTC_ISTAT register does not suffer this penalty; its | ||
32 | * writes to clear status registers complete immediately. | ||
33 | */ | ||
34 | |||
35 | #include <linux/module.h> | ||
36 | #include <linux/kernel.h> | ||
37 | #include <linux/bcd.h> | ||
38 | #include <linux/rtc.h> | ||
39 | #include <linux/init.h> | ||
40 | #include <linux/platform_device.h> | ||
41 | #include <linux/seq_file.h> | ||
42 | #include <linux/interrupt.h> | ||
43 | #include <linux/spinlock.h> | ||
44 | #include <linux/delay.h> | ||
45 | |||
46 | #include <asm/blackfin.h> | ||
47 | |||
48 | #define stamp(fmt, args...) pr_debug("%s:%i: " fmt "\n", __FUNCTION__, __LINE__, ## args) | ||
49 | #define stampit() stamp("here i am") | ||
50 | |||
51 | struct bfin_rtc { | ||
52 | struct rtc_device *rtc_dev; | ||
53 | struct rtc_time rtc_alarm; | ||
54 | spinlock_t lock; | ||
55 | }; | ||
56 | |||
57 | /* Bit values for the ISTAT / ICTL registers */ | ||
58 | #define RTC_ISTAT_WRITE_COMPLETE 0x8000 | ||
59 | #define RTC_ISTAT_WRITE_PENDING 0x4000 | ||
60 | #define RTC_ISTAT_ALARM_DAY 0x0040 | ||
61 | #define RTC_ISTAT_24HR 0x0020 | ||
62 | #define RTC_ISTAT_HOUR 0x0010 | ||
63 | #define RTC_ISTAT_MIN 0x0008 | ||
64 | #define RTC_ISTAT_SEC 0x0004 | ||
65 | #define RTC_ISTAT_ALARM 0x0002 | ||
66 | #define RTC_ISTAT_STOPWATCH 0x0001 | ||
67 | |||
68 | /* Shift values for RTC_STAT register */ | ||
69 | #define DAY_BITS_OFF 17 | ||
70 | #define HOUR_BITS_OFF 12 | ||
71 | #define MIN_BITS_OFF 6 | ||
72 | #define SEC_BITS_OFF 0 | ||
73 | |||
74 | /* Some helper functions to convert between the common RTC notion of time | ||
75 | * and the internal Blackfin notion that is stored in 32bits. | ||
76 | */ | ||
77 | static inline u32 rtc_time_to_bfin(unsigned long now) | ||
78 | { | ||
79 | u32 sec = (now % 60); | ||
80 | u32 min = (now % (60 * 60)) / 60; | ||
81 | u32 hour = (now % (60 * 60 * 24)) / (60 * 60); | ||
82 | u32 days = (now / (60 * 60 * 24)); | ||
83 | return (sec << SEC_BITS_OFF) + | ||
84 | (min << MIN_BITS_OFF) + | ||
85 | (hour << HOUR_BITS_OFF) + | ||
86 | (days << DAY_BITS_OFF); | ||
87 | } | ||
88 | static inline unsigned long rtc_bfin_to_time(u32 rtc_bfin) | ||
89 | { | ||
90 | return (((rtc_bfin >> SEC_BITS_OFF) & 0x003F)) + | ||
91 | (((rtc_bfin >> MIN_BITS_OFF) & 0x003F) * 60) + | ||
92 | (((rtc_bfin >> HOUR_BITS_OFF) & 0x001F) * 60 * 60) + | ||
93 | (((rtc_bfin >> DAY_BITS_OFF) & 0x7FFF) * 60 * 60 * 24); | ||
94 | } | ||
95 | static inline void rtc_bfin_to_tm(u32 rtc_bfin, struct rtc_time *tm) | ||
96 | { | ||
97 | rtc_time_to_tm(rtc_bfin_to_time(rtc_bfin), tm); | ||
98 | } | ||
99 | |||
100 | /* Wait for the previous write to a RTC register to complete. | ||
101 | * Unfortunately, we can't sleep here as that introduces a race condition when | ||
102 | * turning on interrupt events. Consider this: | ||
103 | * - process sets alarm | ||
104 | * - process enables alarm | ||
105 | * - process sleeps while waiting for rtc write to sync | ||
106 | * - interrupt fires while process is sleeping | ||
107 | * - interrupt acks the event by writing to ISTAT | ||
108 | * - interrupt sets the WRITE PENDING bit | ||
109 | * - interrupt handler finishes | ||
110 | * - process wakes up, sees WRITE PENDING bit set, goes to sleep | ||
111 | * - interrupt fires while process is sleeping | ||
112 | * If anyone can point out the obvious solution here, i'm listening :). This | ||
113 | * shouldn't be an issue on an SMP or preempt system as this function should | ||
114 | * only be called with the rtc lock held. | ||
115 | */ | ||
116 | static void rtc_bfin_sync_pending(void) | ||
117 | { | ||
118 | stampit(); | ||
119 | while (!(bfin_read_RTC_ISTAT() & RTC_ISTAT_WRITE_COMPLETE)) { | ||
120 | if (!(bfin_read_RTC_ISTAT() & RTC_ISTAT_WRITE_PENDING)) | ||
121 | break; | ||
122 | } | ||
123 | bfin_write_RTC_ISTAT(RTC_ISTAT_WRITE_COMPLETE); | ||
124 | } | ||
125 | |||
126 | static void rtc_bfin_reset(struct bfin_rtc *rtc) | ||
127 | { | ||
128 | /* Initialize the RTC. Enable pre-scaler to scale RTC clock | ||
129 | * to 1Hz and clear interrupt/status registers. */ | ||
130 | spin_lock_irq(&rtc->lock); | ||
131 | rtc_bfin_sync_pending(); | ||
132 | bfin_write_RTC_PREN(0x1); | ||
133 | bfin_write_RTC_ICTL(0); | ||
134 | bfin_write_RTC_SWCNT(0); | ||
135 | bfin_write_RTC_ALARM(0); | ||
136 | bfin_write_RTC_ISTAT(0xFFFF); | ||
137 | spin_unlock_irq(&rtc->lock); | ||
138 | } | ||
139 | |||
140 | static irqreturn_t bfin_rtc_interrupt(int irq, void *dev_id) | ||
141 | { | ||
142 | struct platform_device *pdev = to_platform_device(dev_id); | ||
143 | struct bfin_rtc *rtc = platform_get_drvdata(pdev); | ||
144 | unsigned long events = 0; | ||
145 | u16 rtc_istat; | ||
146 | |||
147 | stampit(); | ||
148 | |||
149 | spin_lock_irq(&rtc->lock); | ||
150 | |||
151 | rtc_istat = bfin_read_RTC_ISTAT(); | ||
152 | |||
153 | if (rtc_istat & (RTC_ISTAT_ALARM | RTC_ISTAT_ALARM_DAY)) { | ||
154 | bfin_write_RTC_ISTAT(RTC_ISTAT_ALARM | RTC_ISTAT_ALARM_DAY); | ||
155 | events |= RTC_AF | RTC_IRQF; | ||
156 | } | ||
157 | |||
158 | if (rtc_istat & RTC_ISTAT_STOPWATCH) { | ||
159 | bfin_write_RTC_ISTAT(RTC_ISTAT_STOPWATCH); | ||
160 | events |= RTC_PF | RTC_IRQF; | ||
161 | bfin_write_RTC_SWCNT(rtc->rtc_dev->irq_freq); | ||
162 | } | ||
163 | |||
164 | if (rtc_istat & RTC_ISTAT_SEC) { | ||
165 | bfin_write_RTC_ISTAT(RTC_ISTAT_SEC); | ||
166 | events |= RTC_UF | RTC_IRQF; | ||
167 | } | ||
168 | |||
169 | rtc_update_irq(rtc->rtc_dev, 1, events); | ||
170 | |||
171 | spin_unlock_irq(&rtc->lock); | ||
172 | |||
173 | return IRQ_HANDLED; | ||
174 | } | ||
175 | |||
176 | static int bfin_rtc_open(struct device *dev) | ||
177 | { | ||
178 | struct bfin_rtc *rtc = dev_get_drvdata(dev); | ||
179 | int ret; | ||
180 | |||
181 | stampit(); | ||
182 | |||
183 | ret = request_irq(IRQ_RTC, bfin_rtc_interrupt, IRQF_DISABLED, "rtc-bfin", dev); | ||
184 | if (unlikely(ret)) { | ||
185 | dev_err(dev, "request RTC IRQ failed with %d\n", ret); | ||
186 | return ret; | ||
187 | } | ||
188 | |||
189 | rtc_bfin_reset(rtc); | ||
190 | |||
191 | return ret; | ||
192 | } | ||
193 | |||
194 | static void bfin_rtc_release(struct device *dev) | ||
195 | { | ||
196 | struct bfin_rtc *rtc = dev_get_drvdata(dev); | ||
197 | stampit(); | ||
198 | rtc_bfin_reset(rtc); | ||
199 | free_irq(IRQ_RTC, dev); | ||
200 | } | ||
201 | |||
202 | static int bfin_rtc_ioctl(struct device *dev, unsigned int cmd, unsigned long arg) | ||
203 | { | ||
204 | struct bfin_rtc *rtc = dev_get_drvdata(dev); | ||
205 | |||
206 | stampit(); | ||
207 | |||
208 | switch (cmd) { | ||
209 | case RTC_PIE_ON: | ||
210 | stampit(); | ||
211 | spin_lock_irq(&rtc->lock); | ||
212 | rtc_bfin_sync_pending(); | ||
213 | bfin_write_RTC_ISTAT(RTC_ISTAT_STOPWATCH); | ||
214 | bfin_write_RTC_SWCNT(rtc->rtc_dev->irq_freq); | ||
215 | bfin_write_RTC_ICTL(bfin_read_RTC_ICTL() | RTC_ISTAT_STOPWATCH); | ||
216 | spin_unlock_irq(&rtc->lock); | ||
217 | return 0; | ||
218 | case RTC_PIE_OFF: | ||
219 | stampit(); | ||
220 | spin_lock_irq(&rtc->lock); | ||
221 | rtc_bfin_sync_pending(); | ||
222 | bfin_write_RTC_SWCNT(0); | ||
223 | bfin_write_RTC_ICTL(bfin_read_RTC_ICTL() & ~RTC_ISTAT_STOPWATCH); | ||
224 | spin_unlock_irq(&rtc->lock); | ||
225 | return 0; | ||
226 | |||
227 | case RTC_UIE_ON: | ||
228 | stampit(); | ||
229 | spin_lock_irq(&rtc->lock); | ||
230 | rtc_bfin_sync_pending(); | ||
231 | bfin_write_RTC_ISTAT(RTC_ISTAT_SEC); | ||
232 | bfin_write_RTC_ICTL(bfin_read_RTC_ICTL() | RTC_ISTAT_SEC); | ||
233 | spin_unlock_irq(&rtc->lock); | ||
234 | return 0; | ||
235 | case RTC_UIE_OFF: | ||
236 | stampit(); | ||
237 | spin_lock_irq(&rtc->lock); | ||
238 | rtc_bfin_sync_pending(); | ||
239 | bfin_write_RTC_ICTL(bfin_read_RTC_ICTL() & ~RTC_ISTAT_SEC); | ||
240 | spin_unlock_irq(&rtc->lock); | ||
241 | return 0; | ||
242 | |||
243 | case RTC_AIE_ON: { | ||
244 | unsigned long rtc_alarm; | ||
245 | u16 which_alarm; | ||
246 | int ret = 0; | ||
247 | |||
248 | stampit(); | ||
249 | |||
250 | spin_lock_irq(&rtc->lock); | ||
251 | |||
252 | rtc_bfin_sync_pending(); | ||
253 | if (rtc->rtc_alarm.tm_yday == -1) { | ||
254 | struct rtc_time now; | ||
255 | rtc_bfin_to_tm(bfin_read_RTC_STAT(), &now); | ||
256 | now.tm_sec = rtc->rtc_alarm.tm_sec; | ||
257 | now.tm_min = rtc->rtc_alarm.tm_min; | ||
258 | now.tm_hour = rtc->rtc_alarm.tm_hour; | ||
259 | ret = rtc_tm_to_time(&now, &rtc_alarm); | ||
260 | which_alarm = RTC_ISTAT_ALARM; | ||
261 | } else { | ||
262 | ret = rtc_tm_to_time(&rtc->rtc_alarm, &rtc_alarm); | ||
263 | which_alarm = RTC_ISTAT_ALARM_DAY; | ||
264 | } | ||
265 | if (ret == 0) { | ||
266 | bfin_write_RTC_ISTAT(which_alarm); | ||
267 | bfin_write_RTC_ALARM(rtc_time_to_bfin(rtc_alarm)); | ||
268 | bfin_write_RTC_ICTL(bfin_read_RTC_ICTL() | which_alarm); | ||
269 | } | ||
270 | |||
271 | spin_unlock_irq(&rtc->lock); | ||
272 | |||
273 | return ret; | ||
274 | } | ||
275 | case RTC_AIE_OFF: | ||
276 | stampit(); | ||
277 | spin_lock_irq(&rtc->lock); | ||
278 | rtc_bfin_sync_pending(); | ||
279 | bfin_write_RTC_ICTL(bfin_read_RTC_ICTL() & ~(RTC_ISTAT_ALARM | RTC_ISTAT_ALARM_DAY)); | ||
280 | spin_unlock_irq(&rtc->lock); | ||
281 | return 0; | ||
282 | } | ||
283 | |||
284 | return -ENOIOCTLCMD; | ||
285 | } | ||
286 | |||
287 | static int bfin_rtc_read_time(struct device *dev, struct rtc_time *tm) | ||
288 | { | ||
289 | struct bfin_rtc *rtc = dev_get_drvdata(dev); | ||
290 | |||
291 | stampit(); | ||
292 | |||
293 | spin_lock_irq(&rtc->lock); | ||
294 | rtc_bfin_sync_pending(); | ||
295 | rtc_bfin_to_tm(bfin_read_RTC_STAT(), tm); | ||
296 | spin_unlock_irq(&rtc->lock); | ||
297 | |||
298 | return 0; | ||
299 | } | ||
300 | |||
301 | static int bfin_rtc_set_time(struct device *dev, struct rtc_time *tm) | ||
302 | { | ||
303 | struct bfin_rtc *rtc = dev_get_drvdata(dev); | ||
304 | int ret; | ||
305 | unsigned long now; | ||
306 | |||
307 | stampit(); | ||
308 | |||
309 | spin_lock_irq(&rtc->lock); | ||
310 | |||
311 | ret = rtc_tm_to_time(tm, &now); | ||
312 | if (ret == 0) { | ||
313 | rtc_bfin_sync_pending(); | ||
314 | bfin_write_RTC_STAT(rtc_time_to_bfin(now)); | ||
315 | } | ||
316 | |||
317 | spin_unlock_irq(&rtc->lock); | ||
318 | |||
319 | return ret; | ||
320 | } | ||
321 | |||
322 | static int bfin_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm) | ||
323 | { | ||
324 | struct bfin_rtc *rtc = dev_get_drvdata(dev); | ||
325 | stampit(); | ||
326 | memcpy(&alrm->time, &rtc->rtc_alarm, sizeof(struct rtc_time)); | ||
327 | alrm->pending = !!(bfin_read_RTC_ICTL() & (RTC_ISTAT_ALARM | RTC_ISTAT_ALARM_DAY)); | ||
328 | return 0; | ||
329 | } | ||
330 | |||
331 | static int bfin_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm) | ||
332 | { | ||
333 | struct bfin_rtc *rtc = dev_get_drvdata(dev); | ||
334 | stampit(); | ||
335 | memcpy(&rtc->rtc_alarm, &alrm->time, sizeof(struct rtc_time)); | ||
336 | return 0; | ||
337 | } | ||
338 | |||
339 | static int bfin_rtc_proc(struct device *dev, struct seq_file *seq) | ||
340 | { | ||
341 | #define yesno(x) (x ? "yes" : "no") | ||
342 | u16 ictl = bfin_read_RTC_ICTL(); | ||
343 | stampit(); | ||
344 | seq_printf(seq, "alarm_IRQ\t: %s\n", yesno(ictl & RTC_ISTAT_ALARM)); | ||
345 | seq_printf(seq, "wkalarm_IRQ\t: %s\n", yesno(ictl & RTC_ISTAT_ALARM_DAY)); | ||
346 | seq_printf(seq, "seconds_IRQ\t: %s\n", yesno(ictl & RTC_ISTAT_SEC)); | ||
347 | seq_printf(seq, "periodic_IRQ\t: %s\n", yesno(ictl & RTC_ISTAT_STOPWATCH)); | ||
348 | #ifdef DEBUG | ||
349 | seq_printf(seq, "RTC_STAT\t: 0x%08X\n", bfin_read_RTC_STAT()); | ||
350 | seq_printf(seq, "RTC_ICTL\t: 0x%04X\n", bfin_read_RTC_ICTL()); | ||
351 | seq_printf(seq, "RTC_ISTAT\t: 0x%04X\n", bfin_read_RTC_ISTAT()); | ||
352 | seq_printf(seq, "RTC_SWCNT\t: 0x%04X\n", bfin_read_RTC_SWCNT()); | ||
353 | seq_printf(seq, "RTC_ALARM\t: 0x%08X\n", bfin_read_RTC_ALARM()); | ||
354 | seq_printf(seq, "RTC_PREN\t: 0x%04X\n", bfin_read_RTC_PREN()); | ||
355 | #endif | ||
356 | return 0; | ||
357 | } | ||
358 | |||
359 | static int bfin_irq_set_freq(struct device *dev, int freq) | ||
360 | { | ||
361 | struct bfin_rtc *rtc = dev_get_drvdata(dev); | ||
362 | stampit(); | ||
363 | rtc->rtc_dev->irq_freq = freq; | ||
364 | return 0; | ||
365 | } | ||
366 | |||
367 | static struct rtc_class_ops bfin_rtc_ops = { | ||
368 | .open = bfin_rtc_open, | ||
369 | .release = bfin_rtc_release, | ||
370 | .ioctl = bfin_rtc_ioctl, | ||
371 | .read_time = bfin_rtc_read_time, | ||
372 | .set_time = bfin_rtc_set_time, | ||
373 | .read_alarm = bfin_rtc_read_alarm, | ||
374 | .set_alarm = bfin_rtc_set_alarm, | ||
375 | .proc = bfin_rtc_proc, | ||
376 | .irq_set_freq = bfin_irq_set_freq, | ||
377 | }; | ||
378 | |||
379 | static int __devinit bfin_rtc_probe(struct platform_device *pdev) | ||
380 | { | ||
381 | struct bfin_rtc *rtc; | ||
382 | int ret = 0; | ||
383 | |||
384 | stampit(); | ||
385 | |||
386 | rtc = kzalloc(sizeof(*rtc), GFP_KERNEL); | ||
387 | if (unlikely(!rtc)) | ||
388 | return -ENOMEM; | ||
389 | |||
390 | spin_lock_init(&rtc->lock); | ||
391 | |||
392 | rtc->rtc_dev = rtc_device_register(pdev->name, &pdev->dev, &bfin_rtc_ops, THIS_MODULE); | ||
393 | if (unlikely(IS_ERR(rtc))) { | ||
394 | ret = PTR_ERR(rtc->rtc_dev); | ||
395 | goto err; | ||
396 | } | ||
397 | rtc->rtc_dev->irq_freq = 0; | ||
398 | rtc->rtc_dev->max_user_freq = (2 << 16); /* stopwatch is an unsigned 16 bit reg */ | ||
399 | |||
400 | platform_set_drvdata(pdev, rtc); | ||
401 | |||
402 | return 0; | ||
403 | |||
404 | err: | ||
405 | kfree(rtc); | ||
406 | return ret; | ||
407 | } | ||
408 | |||
409 | static int __devexit bfin_rtc_remove(struct platform_device *pdev) | ||
410 | { | ||
411 | struct bfin_rtc *rtc = platform_get_drvdata(pdev); | ||
412 | |||
413 | rtc_device_unregister(rtc->rtc_dev); | ||
414 | platform_set_drvdata(pdev, NULL); | ||
415 | kfree(rtc); | ||
416 | |||
417 | return 0; | ||
418 | } | ||
419 | |||
420 | static struct platform_driver bfin_rtc_driver = { | ||
421 | .driver = { | ||
422 | .name = "rtc-bfin", | ||
423 | .owner = THIS_MODULE, | ||
424 | }, | ||
425 | .probe = bfin_rtc_probe, | ||
426 | .remove = __devexit_p(bfin_rtc_remove), | ||
427 | }; | ||
428 | |||
429 | static int __init bfin_rtc_init(void) | ||
430 | { | ||
431 | stampit(); | ||
432 | return platform_driver_register(&bfin_rtc_driver); | ||
433 | } | ||
434 | |||
435 | static void __exit bfin_rtc_exit(void) | ||
436 | { | ||
437 | platform_driver_unregister(&bfin_rtc_driver); | ||
438 | } | ||
439 | |||
440 | module_init(bfin_rtc_init); | ||
441 | module_exit(bfin_rtc_exit); | ||
442 | |||
443 | MODULE_DESCRIPTION("Blackfin On-Chip Real Time Clock Driver"); | ||
444 | MODULE_AUTHOR("Mike Frysinger <vapier@gentoo.org>"); | ||
445 | MODULE_LICENSE("GPL"); | ||