pwm: add pca9685 driver

Add pwm driver for the NXP pca9685 16 channel pwm-led controller.

The driver is really barebones at this stage. E.g. the OE' pin and
therefore the corresponding registers are not supported.
The driver was tested on a HW where this pin is tied to GND.

Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
[thierry.reding@gmail.com: style and whitespace cleanups]
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>

1 files changed, 1 insertions, 0 deletions

diff --git a/drivers/pwm/Makefile b/drivers/pwm/Makefile
index 94ba21e24bd6..b3afc0a1800b 100644
--- a/drivers/pwm/Makefile
+++ b/drivers/pwm/Makefile
@@ -6,6 +6,7 @@ obj-$(CONFIG_PWM_IMX)		+= pwm-imx.o
 obj-$(CONFIG_PWM_JZ4740)        += pwm-jz4740.o
 obj-$(CONFIG_PWM_LPC32XX)       += pwm-lpc32xx.o
 obj-$(CONFIG_PWM_MXS)           += pwm-mxs.o
+obj-$(CONFIG_PWM_PCA9685)       += pwm-pca9685.o
 obj-$(CONFIG_PWM_PUV3)          += pwm-puv3.o
 obj-$(CONFIG_PWM_PXA)           += pwm-pxa.o
 obj-$(CONFIG_PWM_SAMSUNG)       += pwm-samsung.o