DS2781 Maxim Stand-Alone Fuel Gauge battery and w1 slave drivers

Signed-off-by: Renata Sayakhova <rsayakhova@gmail.com>
Acked-by: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

3 files changed, 889 insertions, 0 deletions

diff --git a/drivers/power/Kconfig b/drivers/power/Kconfig
index 3a8daf858742..459f66437fe9 100644
--- a/drivers/power/Kconfig
+++ b/drivers/power/Kconfig
@@ -76,6 +76,20 @@ config BATTERY_DS2780
         help
           Say Y here to enable support for batteries with ds2780 chip.
 
+config BATTERY_DS2781
+        tristate "2781 battery driver"
+        depends on HAS_IOMEM
+        select W1
+        select W1_SLAVE_DS2781
+        help
+          If you enable this you will have the DS2781 battery driver support.
+
+          The battery monitor chip is used in many batteries/devices
+          as the one who is responsible for charging/discharging/monitoring
+          Li+ batteries.
+
+          If you are unsure, say N.
+
 config BATTERY_DS2782
         tristate "DS2782/DS2786 standalone gas-gauge"
         depends on I2C
diff --git a/drivers/power/Makefile b/drivers/power/Makefile
index e429008eaf10..c590fa533406 100644
--- a/drivers/power/Makefile
+++ b/drivers/power/Makefile
@@ -16,6 +16,7 @@ obj-$(CONFIG_TEST_POWER)	+= test_power.o
 
 obj-$(CONFIG_BATTERY_DS2760)    += ds2760_battery.o
 obj-$(CONFIG_BATTERY_DS2780)    += ds2780_battery.o
+obj-$(CONFIG_BATTERY_DS2781)    += ds2781_battery.o
 obj-$(CONFIG_BATTERY_DS2782)    += ds2782_battery.o
 obj-$(CONFIG_BATTERY_PMU)       += pmu_battery.o
 obj-$(CONFIG_BATTERY_OLPC)      += olpc_battery.o
diff --git a/drivers/power/ds2781_battery.c b/drivers/power/ds2781_battery.c
new file mode 100644
index 000000000000..ca0d653d0a7a
--- /dev/null
+++ b/drivers/power/ds2781_battery.c
@@ -0,0 +1,874 @@
+/*
+ * 1-wire client/driver for the Maxim/Dallas DS2781 Stand-Alone Fuel Gauge IC
+ *
+ * Author: Renata Sayakhova <renata@oktetlabs.ru>
+ *
+ * Based on ds2780_battery drivers
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/param.h>
+#include <linux/pm.h>
+#include <linux/platform_device.h>
+#include <linux/power_supply.h>
+#include <linux/idr.h>
+
+#include "../w1/w1.h"
+#include "../w1/slaves/w1_ds2781.h"
+
+/* Current unit measurement in uA for a 1 milli-ohm sense resistor */
+#define DS2781_CURRENT_UNITS    1563
+/* Charge unit measurement in uAh for a 1 milli-ohm sense resistor */
+#define DS2781_CHARGE_UNITS             6250
+/* Number of bytes in user EEPROM space */
+#define DS2781_USER_EEPROM_SIZE         (DS2781_EEPROM_BLOCK0_END - \
+                                        DS2781_EEPROM_BLOCK0_START + 1)
+/* Number of bytes in parameter EEPROM space */
+#define DS2781_PARAM_EEPROM_SIZE        (DS2781_EEPROM_BLOCK1_END - \
+                                        DS2781_EEPROM_BLOCK1_START + 1)
+
+struct ds2781_device_info {
+        struct device *dev;
+        struct power_supply bat;
+        struct device *w1_dev;
+        struct task_struct *mutex_holder;
+};
+
+enum current_types {
+        CURRENT_NOW,
+        CURRENT_AVG,
+};
+
+static const char model[] = "DS2781";
+static const char manufacturer[] = "Maxim/Dallas";
+
+static inline struct ds2781_device_info *
+to_ds2781_device_info(struct power_supply *psy)
+{
+        return container_of(psy, struct ds2781_device_info, bat);
+}
+
+static inline struct power_supply *to_power_supply(struct device *dev)
+{
+        return dev_get_drvdata(dev);
+}
+
+static inline int ds2781_battery_io(struct ds2781_device_info *dev_info,
+        char *buf, int addr, size_t count, int io)
+{
+        if (dev_info->mutex_holder == current)
+                return w1_ds2781_io_nolock(dev_info->w1_dev, buf, addr,
+                                count, io);
+        else
+                return w1_ds2781_io(dev_info->w1_dev, buf, addr, count, io);
+}
+
+int w1_ds2781_read(struct ds2781_device_info *dev_info, char *buf,
+                int addr, size_t count)
+{
+        return ds2781_battery_io(dev_info, buf, addr, count, 0);
+}
+
+static inline int ds2781_read8(struct ds2781_device_info *dev_info, u8 *val,
+        int addr)
+{
+        return ds2781_battery_io(dev_info, val, addr, sizeof(u8), 0);
+}
+
+static int ds2781_read16(struct ds2781_device_info *dev_info, s16 *val,
+        int addr)
+{
+        int ret;
+        u8 raw[2];
+
+        ret = ds2781_battery_io(dev_info, raw, addr, sizeof(raw), 0);
+        if (ret < 0)
+                return ret;
+
+        *val = (raw[0] << 8) | raw[1];
+
+        return 0;
+}
+
+static inline int ds2781_read_block(struct ds2781_device_info *dev_info,
+        u8 *val, int addr, size_t count)
+{
+        return ds2781_battery_io(dev_info, val, addr, count, 0);
+}
+
+static inline int ds2781_write(struct ds2781_device_info *dev_info, u8 *val,
+        int addr, size_t count)
+{
+        return ds2781_battery_io(dev_info, val, addr, count, 1);
+}
+
+static inline int ds2781_store_eeprom(struct device *dev, int addr)
+{
+        return w1_ds2781_eeprom_cmd(dev, addr, W1_DS2781_COPY_DATA);
+}
+
+static inline int ds2781_recall_eeprom(struct device *dev, int addr)
+{
+        return w1_ds2781_eeprom_cmd(dev, addr, W1_DS2781_RECALL_DATA);
+}
+
+static int ds2781_save_eeprom(struct ds2781_device_info *dev_info, int reg)
+{
+        int ret;
+
+        ret = ds2781_store_eeprom(dev_info->w1_dev, reg);
+        if (ret < 0)
+                return ret;
+
+        ret = ds2781_recall_eeprom(dev_info->w1_dev, reg);
+        if (ret < 0)
+                return ret;
+
+        return 0;
+}
+
+/* Set sense resistor value in mhos */
+static int ds2781_set_sense_register(struct ds2781_device_info *dev_info,
+        u8 conductance)
+{
+        int ret;
+
+        ret = ds2781_write(dev_info, &conductance,
+                                DS2781_RSNSP, sizeof(u8));
+        if (ret < 0)
+                return ret;
+
+        return ds2781_save_eeprom(dev_info, DS2781_RSNSP);
+}
+
+/* Get RSGAIN value from 0 to 1.999 in steps of 0.001 */
+static int ds2781_get_rsgain_register(struct ds2781_device_info *dev_info,
+        u16 *rsgain)
+{
+        return ds2781_read16(dev_info, rsgain, DS2781_RSGAIN_MSB);
+}
+
+/* Set RSGAIN value from 0 to 1.999 in steps of 0.001 */
+static int ds2781_set_rsgain_register(struct ds2781_device_info *dev_info,
+        u16 rsgain)
+{
+        int ret;
+        u8 raw[] = {rsgain >> 8, rsgain & 0xFF};
+
+        ret = ds2781_write(dev_info, raw,
+                                DS2781_RSGAIN_MSB, sizeof(raw));
+        if (ret < 0)
+                return ret;
+
+        return ds2781_save_eeprom(dev_info, DS2781_RSGAIN_MSB);
+}
+
+static int ds2781_get_voltage(struct ds2781_device_info *dev_info,
+        int *voltage_uV)
+{
+        int ret;
+        char val[2];
+        int voltage_raw;
+
+        ret = w1_ds2781_read(dev_info, val, DS2781_VOLT_MSB, 2 * sizeof(u8));
+        if (ret < 0)
+                return ret;
+        /*
+         * The voltage value is located in 10 bits across the voltage MSB
+         * and LSB registers in two's compliment form
+         * Sign bit of the voltage value is in bit 7 of the voltage MSB register
+         * Bits 9 - 3 of the voltage value are in bits 6 - 0 of the
+         * voltage MSB register
+         * Bits 2 - 0 of the voltage value are in bits 7 - 5 of the
+         * voltage LSB register
+         */
+        voltage_raw = (val[0] << 3) |
+                (val[1] >> 5);
+
+        /* DS2781 reports voltage in units of 9.76mV, but the battery class
+         * reports in units of uV, so convert by multiplying by 9760. */
+        *voltage_uV = voltage_raw * 9760;
+
+        return 0;
+}
+
+static int ds2781_get_temperature(struct ds2781_device_info *dev_info,
+        int *temp)
+{
+        int ret;
+        char val[2];
+        int temp_raw;
+
+        ret = w1_ds2781_read(dev_info, val, DS2781_TEMP_MSB, 2 * sizeof(u8));
+        if (ret < 0)
+                return ret;
+        /*
+         * The temperature value is located in 10 bits across the temperature
+         * MSB and LSB registers in two's compliment form
+         * Sign bit of the temperature value is in bit 7 of the temperature
+         * MSB register
+         * Bits 9 - 3 of the temperature value are in bits 6 - 0 of the
+         * temperature MSB register
+         * Bits 2 - 0 of the temperature value are in bits 7 - 5 of the
+         * temperature LSB register
+         */
+        temp_raw = ((val[0]) << 3) |
+                (val[1] >> 5);
+        *temp = temp_raw + (temp_raw / 4);
+
+        return 0;
+}
+
+static int ds2781_get_current(struct ds2781_device_info *dev_info,
+        enum current_types type, int *current_uA)
+{
+        int ret, sense_res;
+        s16 current_raw;
+        u8 sense_res_raw, reg_msb;
+
+        /*
+         * The units of measurement for current are dependent on the value of
+         * the sense resistor.
+         */
+        ret = ds2781_read8(dev_info, &sense_res_raw, DS2781_RSNSP);
+        if (ret < 0)
+                return ret;
+
+        if (sense_res_raw == 0) {
+                dev_err(dev_info->dev, "sense resistor value is 0\n");
+                return -EINVAL;
+        }
+        sense_res = 1000 / sense_res_raw;
+
+        if (type == CURRENT_NOW)
+                reg_msb = DS2781_CURRENT_MSB;
+        else if (type == CURRENT_AVG)
+                reg_msb = DS2781_IAVG_MSB;
+        else
+                return -EINVAL;
+
+        /*
+         * The current value is located in 16 bits across the current MSB
+         * and LSB registers in two's compliment form
+         * Sign bit of the current value is in bit 7 of the current MSB register
+         * Bits 14 - 8 of the current value are in bits 6 - 0 of the current
+         * MSB register
+         * Bits 7 - 0 of the current value are in bits 7 - 0 of the current
+         * LSB register
+         */
+        ret = ds2781_read16(dev_info, &current_raw, reg_msb);
+        if (ret < 0)
+                return ret;
+
+        *current_uA = current_raw * (DS2781_CURRENT_UNITS / sense_res);
+        return 0;
+}
+
+static int ds2781_get_accumulated_current(struct ds2781_device_info *dev_info,
+        int *accumulated_current)
+{
+        int ret, sense_res;
+        s16 current_raw;
+        u8 sense_res_raw;
+
+        /*
+         * The units of measurement for accumulated current are dependent on
+         * the value of the sense resistor.
+         */
+        ret = ds2781_read8(dev_info, &sense_res_raw, DS2781_RSNSP);
+        if (ret < 0)
+                return ret;
+
+        if (sense_res_raw == 0) {
+                dev_err(dev_info->dev, "sense resistor value is 0\n");
+                return -EINVAL;
+        }
+        sense_res = 1000 / sense_res_raw;
+
+        /*
+         * The ACR value is located in 16 bits across the ACR MSB and
+         * LSB registers
+         * Bits 15 - 8 of the ACR value are in bits 7 - 0 of the ACR
+         * MSB register
+         * Bits 7 - 0 of the ACR value are in bits 7 - 0 of the ACR
+         * LSB register
+         */
+        ret = ds2781_read16(dev_info, &current_raw, DS2781_ACR_MSB);
+        if (ret < 0)
+                return ret;
+
+        *accumulated_current = current_raw * (DS2781_CHARGE_UNITS / sense_res);
+        return 0;
+}
+
+static int ds2781_get_capacity(struct ds2781_device_info *dev_info,
+        int *capacity)
+{
+        int ret;
+        u8 raw;
+
+        ret = ds2781_read8(dev_info, &raw, DS2781_RARC);
+        if (ret < 0)
+                return ret;
+
+        *capacity = raw;
+        return 0;
+}
+
+static int ds2781_get_status(struct ds2781_device_info *dev_info, int *status)
+{
+        int ret, current_uA, capacity;
+
+        ret = ds2781_get_current(dev_info, CURRENT_NOW, &current_uA);
+        if (ret < 0)
+                return ret;
+
+        ret = ds2781_get_capacity(dev_info, &capacity);
+        if (ret < 0)
+                return ret;
+
+        if (power_supply_am_i_supplied(&dev_info->bat)) {
+                if (capacity == 100)
+                        *status = POWER_SUPPLY_STATUS_FULL;
+                else if (current_uA > 50000)
+                        *status = POWER_SUPPLY_STATUS_CHARGING;
+                else
+                        *status = POWER_SUPPLY_STATUS_NOT_CHARGING;
+        } else {
+                *status = POWER_SUPPLY_STATUS_DISCHARGING;
+        }
+        return 0;
+}
+
+static int ds2781_get_charge_now(struct ds2781_device_info *dev_info,
+        int *charge_now)
+{
+        int ret;
+        u16 charge_raw;
+
+        /*
+         * The RAAC value is located in 16 bits across the RAAC MSB and
+         * LSB registers
+         * Bits 15 - 8 of the RAAC value are in bits 7 - 0 of the RAAC
+         * MSB register
+         * Bits 7 - 0 of the RAAC value are in bits 7 - 0 of the RAAC
+         * LSB register
+         */
+        ret = ds2781_read16(dev_info, &charge_raw, DS2781_RAAC_MSB);
+        if (ret < 0)
+                return ret;
+
+        *charge_now = charge_raw * 1600;
+        return 0;
+}
+
+static int ds2781_get_control_register(struct ds2781_device_info *dev_info,
+        u8 *control_reg)
+{
+        return ds2781_read8(dev_info, control_reg, DS2781_CONTROL);
+}
+
+static int ds2781_set_control_register(struct ds2781_device_info *dev_info,
+        u8 control_reg)
+{
+        int ret;
+
+        ret = ds2781_write(dev_info, &control_reg,
+                                DS2781_CONTROL, sizeof(u8));
+        if (ret < 0)
+                return ret;
+
+        return ds2781_save_eeprom(dev_info, DS2781_CONTROL);
+}
+
+static int ds2781_battery_get_property(struct power_supply *psy,
+        enum power_supply_property psp,
+        union power_supply_propval *val)
+{
+        int ret = 0;
+        struct ds2781_device_info *dev_info = to_ds2781_device_info(psy);
+
+        switch (psp) {
+        case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+                ret = ds2781_get_voltage(dev_info, &val->intval);
+                break;
+
+        case POWER_SUPPLY_PROP_TEMP:
+                ret = ds2781_get_temperature(dev_info, &val->intval);
+                break;
+
+        case POWER_SUPPLY_PROP_MODEL_NAME:
+                val->strval = model;
+                break;
+
+        case POWER_SUPPLY_PROP_MANUFACTURER:
+                val->strval = manufacturer;
+                break;
+
+        case POWER_SUPPLY_PROP_CURRENT_NOW:
+                ret = ds2781_get_current(dev_info, CURRENT_NOW, &val->intval);
+                break;
+
+        case POWER_SUPPLY_PROP_CURRENT_AVG:
+                ret = ds2781_get_current(dev_info, CURRENT_AVG, &val->intval);
+                break;
+
+        case POWER_SUPPLY_PROP_STATUS:
+                ret = ds2781_get_status(dev_info, &val->intval);
+                break;
+
+        case POWER_SUPPLY_PROP_CAPACITY:
+                ret = ds2781_get_capacity(dev_info, &val->intval);
+                break;
+
+        case POWER_SUPPLY_PROP_CHARGE_COUNTER:
+                ret = ds2781_get_accumulated_current(dev_info, &val->intval);
+                break;
+
+        case POWER_SUPPLY_PROP_CHARGE_NOW:
+                ret = ds2781_get_charge_now(dev_info, &val->intval);
+                break;
+
+        default:
+                ret = -EINVAL;
+        }
+
+        return ret;
+}
+
+static enum power_supply_property ds2781_battery_props[] = {
+        POWER_SUPPLY_PROP_STATUS,
+        POWER_SUPPLY_PROP_VOLTAGE_NOW,
+        POWER_SUPPLY_PROP_TEMP,
+        POWER_SUPPLY_PROP_MODEL_NAME,
+        POWER_SUPPLY_PROP_MANUFACTURER,
+        POWER_SUPPLY_PROP_CURRENT_NOW,
+        POWER_SUPPLY_PROP_CURRENT_AVG,
+        POWER_SUPPLY_PROP_CAPACITY,
+        POWER_SUPPLY_PROP_CHARGE_COUNTER,
+        POWER_SUPPLY_PROP_CHARGE_NOW,
+};
+
+static ssize_t ds2781_get_pmod_enabled(struct device *dev,
+        struct device_attribute *attr,
+        char *buf)
+{
+        int ret;
+        u8 control_reg;
+        struct power_supply *psy = to_power_supply(dev);
+        struct ds2781_device_info *dev_info = to_ds2781_device_info(psy);
+
+        /* Get power mode */
+        ret = ds2781_get_control_register(dev_info, &control_reg);
+        if (ret < 0)
+                return ret;
+
+        return sprintf(buf, "%d\n",
+                 !!(control_reg & DS2781_CONTROL_PMOD));
+}
+
+static ssize_t ds2781_set_pmod_enabled(struct device *dev,
+        struct device_attribute *attr,
+        const char *buf,
+        size_t count)
+{
+        int ret;
+        u8 control_reg, new_setting;
+        struct power_supply *psy = to_power_supply(dev);
+        struct ds2781_device_info *dev_info = to_ds2781_device_info(psy);
+
+        /* Set power mode */
+        ret = ds2781_get_control_register(dev_info, &control_reg);
+        if (ret < 0)
+                return ret;
+
+        ret = kstrtou8(buf, 0, &new_setting);
+        if (ret < 0)
+                return ret;
+
+        if ((new_setting != 0) && (new_setting != 1)) {
+                dev_err(dev_info->dev, "Invalid pmod setting (0 or 1)\n");
+                return -EINVAL;
+        }
+
+        if (new_setting)
+                control_reg |= DS2781_CONTROL_PMOD;
+        else
+                control_reg &= ~DS2781_CONTROL_PMOD;
+
+        ret = ds2781_set_control_register(dev_info, control_reg);
+        if (ret < 0)
+                return ret;
+
+        return count;
+}
+
+static ssize_t ds2781_get_sense_resistor_value(struct device *dev,
+        struct device_attribute *attr,
+        char *buf)
+{
+        int ret;
+        u8 sense_resistor;
+        struct power_supply *psy = to_power_supply(dev);
+        struct ds2781_device_info *dev_info = to_ds2781_device_info(psy);
+
+        ret = ds2781_read8(dev_info, &sense_resistor, DS2781_RSNSP);
+        if (ret < 0)
+                return ret;
+
+        ret = sprintf(buf, "%d\n", sense_resistor);
+        return ret;
+}
+
+static ssize_t ds2781_set_sense_resistor_value(struct device *dev,
+        struct device_attribute *attr,
+        const char *buf,
+        size_t count)
+{
+        int ret;
+        u8 new_setting;
+        struct power_supply *psy = to_power_supply(dev);
+        struct ds2781_device_info *dev_info = to_ds2781_device_info(psy);
+
+        ret = kstrtou8(buf, 0, &new_setting);
+        if (ret < 0)
+                return ret;
+
+        ret = ds2781_set_sense_register(dev_info, new_setting);
+        if (ret < 0)
+                return ret;
+
+        return count;
+}
+
+static ssize_t ds2781_get_rsgain_setting(struct device *dev,
+        struct device_attribute *attr,
+        char *buf)
+{
+        int ret;
+        u16 rsgain;
+        struct power_supply *psy = to_power_supply(dev);
+        struct ds2781_device_info *dev_info = to_ds2781_device_info(psy);
+
+        ret = ds2781_get_rsgain_register(dev_info, &rsgain);
+        if (ret < 0)
+                return ret;
+
+        return sprintf(buf, "%d\n", rsgain);
+}
+
+static ssize_t ds2781_set_rsgain_setting(struct device *dev,
+        struct device_attribute *attr,
+        const char *buf,
+        size_t count)
+{
+        int ret;
+        u16 new_setting;
+        struct power_supply *psy = to_power_supply(dev);
+        struct ds2781_device_info *dev_info = to_ds2781_device_info(psy);
+
+        ret = kstrtou16(buf, 0, &new_setting);
+        if (ret < 0)
+                return ret;
+
+        /* Gain can only be from 0 to 1.999 in steps of .001 */
+        if (new_setting > 1999) {
+                dev_err(dev_info->dev, "Invalid rsgain setting (0 - 1999)\n");
+                return -EINVAL;
+        }
+
+        ret = ds2781_set_rsgain_register(dev_info, new_setting);
+        if (ret < 0)
+                return ret;
+
+        return count;
+}
+
+static ssize_t ds2781_get_pio_pin(struct device *dev,
+        struct device_attribute *attr,
+        char *buf)
+{
+        int ret;
+        u8 sfr;
+        struct power_supply *psy = to_power_supply(dev);
+        struct ds2781_device_info *dev_info = to_ds2781_device_info(psy);
+
+        ret = ds2781_read8(dev_info, &sfr, DS2781_SFR);
+        if (ret < 0)
+                return ret;
+
+        ret = sprintf(buf, "%d\n", sfr & DS2781_SFR_PIOSC);
+        return ret;
+}
+
+static ssize_t ds2781_set_pio_pin(struct device *dev,
+        struct device_attribute *attr,
+        const char *buf,
+        size_t count)
+{
+        int ret;
+        u8 new_setting;
+        struct power_supply *psy = to_power_supply(dev);
+        struct ds2781_device_info *dev_info = to_ds2781_device_info(psy);
+
+        ret = kstrtou8(buf, 0, &new_setting);
+        if (ret < 0)
+                return ret;
+
+        if ((new_setting != 0) && (new_setting != 1)) {
+                dev_err(dev_info->dev, "Invalid pio_pin setting (0 or 1)\n");
+                return -EINVAL;
+        }
+
+        ret = ds2781_write(dev_info, &new_setting,
+                                DS2781_SFR, sizeof(u8));
+        if (ret < 0)
+                return ret;
+
+        return count;
+}
+
+static ssize_t ds2781_read_param_eeprom_bin(struct file *filp,
+                                struct kobject *kobj,
+                                struct bin_attribute *bin_attr,
+                                char *buf, loff_t off, size_t count)
+{
+        struct device *dev = container_of(kobj, struct device, kobj);
+        struct power_supply *psy = to_power_supply(dev);
+        struct ds2781_device_info *dev_info = to_ds2781_device_info(psy);
+
+        count = min_t(loff_t, count,
+                DS2781_EEPROM_BLOCK1_END -
+                DS2781_EEPROM_BLOCK1_START + 1 - off);
+
+        return ds2781_read_block(dev_info, buf,
+                                DS2781_EEPROM_BLOCK1_START + off, count);
+}
+
+static ssize_t ds2781_write_param_eeprom_bin(struct file *filp,
+                                struct kobject *kobj,
+                                struct bin_attribute *bin_attr,
+                                char *buf, loff_t off, size_t count)
+{
+        struct device *dev = container_of(kobj, struct device, kobj);
+        struct power_supply *psy = to_power_supply(dev);
+        struct ds2781_device_info *dev_info = to_ds2781_device_info(psy);
+        int ret;
+
+        count = min_t(loff_t, count,
+                DS2781_EEPROM_BLOCK1_END -
+                DS2781_EEPROM_BLOCK1_START + 1 - off);
+
+        ret = ds2781_write(dev_info, buf,
+                                DS2781_EEPROM_BLOCK1_START + off, count);
+        if (ret < 0)
+                return ret;
+
+        ret = ds2781_save_eeprom(dev_info, DS2781_EEPROM_BLOCK1_START);
+        if (ret < 0)
+                return ret;
+
+        return count;
+}
+
+static struct bin_attribute ds2781_param_eeprom_bin_attr = {
+        .attr = {
+                .name = "param_eeprom",
+                .mode = S_IRUGO | S_IWUSR,
+        },
+        .size = DS2781_EEPROM_BLOCK1_END - DS2781_EEPROM_BLOCK1_START + 1,
+        .read = ds2781_read_param_eeprom_bin,
+        .write = ds2781_write_param_eeprom_bin,
+};
+
+static ssize_t ds2781_read_user_eeprom_bin(struct file *filp,
+                                struct kobject *kobj,
+                                struct bin_attribute *bin_attr,
+                                char *buf, loff_t off, size_t count)
+{
+        struct device *dev = container_of(kobj, struct device, kobj);
+        struct power_supply *psy = to_power_supply(dev);
+        struct ds2781_device_info *dev_info = to_ds2781_device_info(psy);
+
+        count = min_t(loff_t, count,
+                DS2781_EEPROM_BLOCK0_END -
+                DS2781_EEPROM_BLOCK0_START + 1 - off);
+
+        return ds2781_read_block(dev_info, buf,
+                                DS2781_EEPROM_BLOCK0_START + off, count);
+
+}
+
+static ssize_t ds2781_write_user_eeprom_bin(struct file *filp,
+                                struct kobject *kobj,
+                                struct bin_attribute *bin_attr,
+                                char *buf, loff_t off, size_t count)
+{
+        struct device *dev = container_of(kobj, struct device, kobj);
+        struct power_supply *psy = to_power_supply(dev);
+        struct ds2781_device_info *dev_info = to_ds2781_device_info(psy);
+        int ret;
+
+        count = min_t(loff_t, count,
+                DS2781_EEPROM_BLOCK0_END -
+                DS2781_EEPROM_BLOCK0_START + 1 - off);
+
+        ret = ds2781_write(dev_info, buf,
+                                DS2781_EEPROM_BLOCK0_START + off, count);
+        if (ret < 0)
+                return ret;
+
+        ret = ds2781_save_eeprom(dev_info, DS2781_EEPROM_BLOCK0_START);
+        if (ret < 0)
+                return ret;
+
+        return count;
+}
+
+static struct bin_attribute ds2781_user_eeprom_bin_attr = {
+        .attr = {
+                .name = "user_eeprom",
+                .mode = S_IRUGO | S_IWUSR,
+        },
+        .size = DS2781_EEPROM_BLOCK0_END - DS2781_EEPROM_BLOCK0_START + 1,
+        .read = ds2781_read_user_eeprom_bin,
+        .write = ds2781_write_user_eeprom_bin,
+};
+
+static DEVICE_ATTR(pmod_enabled, S_IRUGO | S_IWUSR, ds2781_get_pmod_enabled,
+        ds2781_set_pmod_enabled);
+static DEVICE_ATTR(sense_resistor_value, S_IRUGO | S_IWUSR,
+        ds2781_get_sense_resistor_value, ds2781_set_sense_resistor_value);
+static DEVICE_ATTR(rsgain_setting, S_IRUGO | S_IWUSR, ds2781_get_rsgain_setting,
+        ds2781_set_rsgain_setting);
+static DEVICE_ATTR(pio_pin, S_IRUGO | S_IWUSR, ds2781_get_pio_pin,
+        ds2781_set_pio_pin);
+
+
+static struct attribute *ds2781_attributes[] = {
+        &dev_attr_pmod_enabled.attr,
+        &dev_attr_sense_resistor_value.attr,
+        &dev_attr_rsgain_setting.attr,
+        &dev_attr_pio_pin.attr,
+        NULL
+};
+
+static const struct attribute_group ds2781_attr_group = {
+        .attrs = ds2781_attributes,
+};
+
+static int __devinit ds2781_battery_probe(struct platform_device *pdev)
+{
+        int ret = 0;
+        struct ds2781_device_info *dev_info;
+
+        dev_info = kzalloc(sizeof(*dev_info), GFP_KERNEL);
+        if (!dev_info) {
+                ret = -ENOMEM;
+                goto fail;
+        }
+
+        platform_set_drvdata(pdev, dev_info);
+
+        dev_info->dev                   = &pdev->dev;
+        dev_info->w1_dev                = pdev->dev.parent;
+        dev_info->bat.name              = dev_name(&pdev->dev);
+        dev_info->bat.type              = POWER_SUPPLY_TYPE_BATTERY;
+        dev_info->bat.properties        = ds2781_battery_props;
+        dev_info->bat.num_properties    = ARRAY_SIZE(ds2781_battery_props);
+        dev_info->bat.get_property      = ds2781_battery_get_property;
+        dev_info->mutex_holder          = current;
+
+        ret = power_supply_register(&pdev->dev, &dev_info->bat);
+        if (ret) {
+                dev_err(dev_info->dev, "failed to register battery\n");
+                goto fail_free_info;
+        }
+
+        ret = sysfs_create_group(&dev_info->bat.dev->kobj, &ds2781_attr_group);
+        if (ret) {
+                dev_err(dev_info->dev, "failed to create sysfs group\n");
+                goto fail_unregister;
+        }
+
+        ret = sysfs_create_bin_file(&dev_info->bat.dev->kobj,
+                                        &ds2781_param_eeprom_bin_attr);
+        if (ret) {
+                dev_err(dev_info->dev,
+                                "failed to create param eeprom bin file");
+                goto fail_remove_group;
+        }
+
+        ret = sysfs_create_bin_file(&dev_info->bat.dev->kobj,
+                                        &ds2781_user_eeprom_bin_attr);
+        if (ret) {
+                dev_err(dev_info->dev,
+                                "failed to create user eeprom bin file");
+                goto fail_remove_bin_file;
+        }
+
+        dev_info->mutex_holder = NULL;
+
+        return 0;
+
+fail_remove_bin_file:
+        sysfs_remove_bin_file(&dev_info->bat.dev->kobj,
+                                &ds2781_param_eeprom_bin_attr);
+fail_remove_group:
+        sysfs_remove_group(&dev_info->bat.dev->kobj, &ds2781_attr_group);
+fail_unregister:
+        power_supply_unregister(&dev_info->bat);
+fail_free_info:
+        kfree(dev_info);
+fail:
+        return ret;
+}
+
+static int __devexit ds2781_battery_remove(struct platform_device *pdev)
+{
+        struct ds2781_device_info *dev_info = platform_get_drvdata(pdev);
+
+        dev_info->mutex_holder = current;
+
+        /* remove attributes */
+        sysfs_remove_group(&dev_info->bat.dev->kobj, &ds2781_attr_group);
+
+        power_supply_unregister(&dev_info->bat);
+
+        kfree(dev_info);
+        return 0;
+}
+
+static struct platform_driver ds2781_battery_driver = {
+        .driver = {
+                .name = "ds2781-battery",
+        },
+        .probe    = ds2781_battery_probe,
+        .remove   = __devexit_p(ds2781_battery_remove),
+};
+
+static int __init ds2781_battery_init(void)
+{
+        return platform_driver_register(&ds2781_battery_driver);
+}
+
+static void __exit ds2781_battery_exit(void)
+{
+        platform_driver_unregister(&ds2781_battery_driver);
+}
+
+module_init(ds2781_battery_init);
+module_exit(ds2781_battery_exit);
+
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Renata Sayakhova <renata@oktetlabs.ru>");
+MODULE_DESCRIPTION("Maxim/Dallas DS2781 Stand-Alone Fuel Gauage IC driver");
+MODULE_ALIAS("platform:ds2781-battery");
+