charger-manager: Set current limit of regulator for over current protection

This patch support the protection of host device from over current.
The Charger-manager set proper current limit of charger(regulator) for
charging according to type of charger cable when external connector
is attached.

Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Myungjoo Ham <myungjoo.ham@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>

1 files changed, 15 insertions, 0 deletions

diff --git a/drivers/power/charger-manager.c b/drivers/power/charger-manager.c
index d1e99e7957d2..526e5c931294 100644
--- a/drivers/power/charger-manager.c
+++ b/drivers/power/charger-manager.c
@@ -1001,6 +1001,21 @@ static void charger_extcon_work(struct work_struct *work)
 {
         struct charger_cable *cable =
                         container_of(work, struct charger_cable, wq);
+        int ret;
+
+        if (cable->attached && cable->min_uA != 0 && cable->max_uA != 0) {
+                ret = regulator_set_current_limit(cable->charger->consumer,
+                                        cable->min_uA, cable->max_uA);
+                if (ret < 0) {
+                        pr_err("Cannot set current limit of %s (%s)\n",
+                                cable->charger->regulator_name, cable->name);
+                        return;
+                }
+
+                pr_info("Set current limit of %s : %duA ~ %duA\n",
+                                        cable->charger->regulator_name,
+                                        cable->min_uA, cable->max_uA);
+        }
 
         try_charger_enable(cable->cm, cable->attached);
 }