Merge branch 'drivers-platform' into release

Conflicts:
	drivers/misc/Kconfig

Signed-off-by: Len Brown <len.brown@intel.com>

1 files changed, 1266 insertions, 0 deletions

diff --git a/drivers/platform/x86/asus-laptop.c b/drivers/platform/x86/asus-laptop.c
new file mode 100644
index 000000000000..8fb8b3591048
--- /dev/null
+++ b/drivers/platform/x86/asus-laptop.c
@@ -0,0 +1,1266 @@
+/*
+ *  asus-laptop.c - Asus Laptop Support
+ *
+ *
+ *  Copyright (C) 2002-2005 Julien Lerouge, 2003-2006 Karol Kozimor
+ *  Copyright (C) 2006-2007 Corentin Chary
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ *
+ *  The development page for this driver is located at
+ *  http://sourceforge.net/projects/acpi4asus/
+ *
+ *  Credits:
+ *  Pontus Fuchs   - Helper functions, cleanup
+ *  Johann Wiesner - Small compile fixes
+ *  John Belmonte  - ACPI code for Toshiba laptop was a good starting point.
+ *  Eric Burghard  - LED display support for W1N
+ *  Josh Green     - Light Sens support
+ *  Thomas Tuttle  - His first patch for led support was very helpfull
+ *  Sam Lin        - GPS support
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/err.h>
+#include <linux/proc_fs.h>
+#include <linux/backlight.h>
+#include <linux/fb.h>
+#include <linux/leds.h>
+#include <linux/platform_device.h>
+#include <acpi/acpi_drivers.h>
+#include <acpi/acpi_bus.h>
+#include <asm/uaccess.h>
+
+#define ASUS_LAPTOP_VERSION "0.42"
+
+#define ASUS_HOTK_NAME          "Asus Laptop Support"
+#define ASUS_HOTK_CLASS         "hotkey"
+#define ASUS_HOTK_DEVICE_NAME   "Hotkey"
+#define ASUS_HOTK_FILE          "asus-laptop"
+#define ASUS_HOTK_PREFIX        "\\_SB.ATKD."
+
+/*
+ * Some events we use, same for all Asus
+ */
+#define ATKD_BR_UP       0x10
+#define ATKD_BR_DOWN     0x20
+#define ATKD_LCD_ON      0x33
+#define ATKD_LCD_OFF     0x34
+
+/*
+ * Known bits returned by \_SB.ATKD.HWRS
+ */
+#define WL_HWRS     0x80
+#define BT_HWRS     0x100
+
+/*
+ * Flags for hotk status
+ * WL_ON and BT_ON are also used for wireless_status()
+ */
+#define WL_ON       0x01        //internal Wifi
+#define BT_ON       0x02        //internal Bluetooth
+#define MLED_ON     0x04        //mail LED
+#define TLED_ON     0x08        //touchpad LED
+#define RLED_ON     0x10        //Record LED
+#define PLED_ON     0x20        //Phone LED
+#define GLED_ON     0x40        //Gaming LED
+#define LCD_ON      0x80        //LCD backlight
+#define GPS_ON      0x100       //GPS
+
+#define ASUS_LOG    ASUS_HOTK_FILE ": "
+#define ASUS_ERR    KERN_ERR    ASUS_LOG
+#define ASUS_WARNING    KERN_WARNING    ASUS_LOG
+#define ASUS_NOTICE KERN_NOTICE ASUS_LOG
+#define ASUS_INFO   KERN_INFO   ASUS_LOG
+#define ASUS_DEBUG  KERN_DEBUG  ASUS_LOG
+
+MODULE_AUTHOR("Julien Lerouge, Karol Kozimor, Corentin Chary");
+MODULE_DESCRIPTION(ASUS_HOTK_NAME);
+MODULE_LICENSE("GPL");
+
+/* WAPF defines the behavior of the Fn+Fx wlan key
+ * The significance of values is yet to be found, but
+ * most of the time:
+ * 0x0 will do nothing
+ * 0x1 will allow to control the device with Fn+Fx key.
+ * 0x4 will send an ACPI event (0x88) while pressing the Fn+Fx key
+ * 0x5 like 0x1 or 0x4
+ * So, if something doesn't work as you want, just try other values =)
+ */
+static uint wapf = 1;
+module_param(wapf, uint, 0644);
+MODULE_PARM_DESC(wapf, "WAPF value");
+
+#define ASUS_HANDLE(object, paths...)                                   \
+        static acpi_handle  object##_handle = NULL;                     \
+        static char *object##_paths[] = { paths }
+
+/* LED */
+ASUS_HANDLE(mled_set, ASUS_HOTK_PREFIX "MLED");
+ASUS_HANDLE(tled_set, ASUS_HOTK_PREFIX "TLED");
+ASUS_HANDLE(rled_set, ASUS_HOTK_PREFIX "RLED"); /* W1JC */
+ASUS_HANDLE(pled_set, ASUS_HOTK_PREFIX "PLED"); /* A7J */
+ASUS_HANDLE(gled_set, ASUS_HOTK_PREFIX "GLED"); /* G1, G2 (probably) */
+
+/* LEDD */
+ASUS_HANDLE(ledd_set, ASUS_HOTK_PREFIX "SLCM");
+
+/* Bluetooth and WLAN
+ * WLED and BLED are not handled like other XLED, because in some dsdt
+ * they also control the WLAN/Bluetooth device.
+ */
+ASUS_HANDLE(wl_switch, ASUS_HOTK_PREFIX "WLED");
+ASUS_HANDLE(bt_switch, ASUS_HOTK_PREFIX "BLED");
+ASUS_HANDLE(wireless_status, ASUS_HOTK_PREFIX "RSTS");  /* All new models */
+
+/* Brightness */
+ASUS_HANDLE(brightness_set, ASUS_HOTK_PREFIX "SPLV");
+ASUS_HANDLE(brightness_get, ASUS_HOTK_PREFIX "GPLV");
+
+/* Backlight */
+ASUS_HANDLE(lcd_switch, "\\_SB.PCI0.SBRG.EC0._Q10",     /* All new models */
+            "\\_SB.PCI0.ISA.EC0._Q10",  /* A1x */
+            "\\_SB.PCI0.PX40.ECD0._Q10",        /* L3C */
+            "\\_SB.PCI0.PX40.EC0.Q10",  /* M1A */
+            "\\_SB.PCI0.LPCB.EC0._Q10", /* P30 */
+            "\\_SB.PCI0.LPCB.EC0._Q0E", /* P30/P35 */
+            "\\_SB.PCI0.PX40.Q10",      /* S1x */
+            "\\Q10");           /* A2x, L2D, L3D, M2E */
+
+/* Display */
+ASUS_HANDLE(display_set, ASUS_HOTK_PREFIX "SDSP");
+ASUS_HANDLE(display_get, "\\_SB.PCI0.P0P1.VGA.GETD",    /*  A6B, A6K A6R A7D F3JM L4R M6R A3G
+                                                           M6A M6V VX-1 V6J V6V W3Z */
+            "\\_SB.PCI0.P0P2.VGA.GETD", /* A3E A4K, A4D A4L A6J A7J A8J Z71V M9V
+                                           S5A M5A z33A W1Jc W2V G1 */
+            "\\_SB.PCI0.P0P3.VGA.GETD", /* A6V A6Q */
+            "\\_SB.PCI0.P0PA.VGA.GETD", /* A6T, A6M */
+            "\\_SB.PCI0.PCI1.VGAC.NMAP",        /* L3C */
+            "\\_SB.PCI0.VGA.GETD",      /* Z96F */
+            "\\ACTD",           /* A2D */
+            "\\ADVG",           /* A4G Z71A W1N W5A W5F M2N M3N M5N M6N S1N S5N */
+            "\\DNXT",           /* P30 */
+            "\\INFB",           /* A2H D1 L2D L3D L3H L2E L5D L5C M1A M2E L4L W3V */
+            "\\SSTE");          /* A3F A6F A3N A3L M6N W3N W6A */
+
+ASUS_HANDLE(ls_switch, ASUS_HOTK_PREFIX "ALSC");        /* Z71A Z71V */
+ASUS_HANDLE(ls_level, ASUS_HOTK_PREFIX "ALSL"); /* Z71A Z71V */
+
+/* GPS */
+/* R2H use different handle for GPS on/off */
+ASUS_HANDLE(gps_on, ASUS_HOTK_PREFIX "SDON");   /* R2H */
+ASUS_HANDLE(gps_off, ASUS_HOTK_PREFIX "SDOF");  /* R2H */
+ASUS_HANDLE(gps_status, ASUS_HOTK_PREFIX "GPST");
+
+/*
+ * This is the main structure, we can use it to store anything interesting
+ * about the hotk device
+ */
+struct asus_hotk {
+        char *name;             //laptop name
+        struct acpi_device *device;     //the device we are in
+        acpi_handle handle;     //the handle of the hotk device
+        char status;            //status of the hotk, for LEDs, ...
+        u32 ledd_status;        //status of the LED display
+        u8 light_level;         //light sensor level
+        u8 light_switch;        //light sensor switch value
+        u16 event_count[128];   //count for each event TODO make this better
+};
+
+/*
+ * This header is made available to allow proper configuration given model,
+ * revision number , ... this info cannot go in struct asus_hotk because it is
+ * available before the hotk
+ */
+static struct acpi_table_header *asus_info;
+
+/* The actual device the driver binds to */
+static struct asus_hotk *hotk;
+
+/*
+ * The hotkey driver declaration
+ */
+static const struct acpi_device_id asus_device_ids[] = {
+        {"ATK0100", 0},
+        {"", 0},
+};
+MODULE_DEVICE_TABLE(acpi, asus_device_ids);
+
+static int asus_hotk_add(struct acpi_device *device);
+static int asus_hotk_remove(struct acpi_device *device, int type);
+static struct acpi_driver asus_hotk_driver = {
+        .name = ASUS_HOTK_NAME,
+        .class = ASUS_HOTK_CLASS,
+        .ids = asus_device_ids,
+        .ops = {
+                .add = asus_hotk_add,
+                .remove = asus_hotk_remove,
+                },
+};
+
+/* The backlight device /sys/class/backlight */
+static struct backlight_device *asus_backlight_device;
+
+/*
+ * The backlight class declaration
+ */
+static int read_brightness(struct backlight_device *bd);
+static int update_bl_status(struct backlight_device *bd);
+static struct backlight_ops asusbl_ops = {
+        .get_brightness = read_brightness,
+        .update_status = update_bl_status,
+};
+
+/* These functions actually update the LED's, and are called from a
+ * workqueue. By doing this as separate work rather than when the LED
+ * subsystem asks, we avoid messing with the Asus ACPI stuff during a
+ * potentially bad time, such as a timer interrupt. */
+static struct workqueue_struct *led_workqueue;
+
+#define ASUS_LED(object, ledname)                                       \
+        static void object##_led_set(struct led_classdev *led_cdev,     \
+                                     enum led_brightness value);        \
+        static void object##_led_update(struct work_struct *ignored);   \
+        static int object##_led_wk;                                     \
+        static DECLARE_WORK(object##_led_work, object##_led_update);    \
+        static struct led_classdev object##_led = {                     \
+                .name           = "asus::" ledname,                     \
+                .brightness_set = object##_led_set,                     \
+        }
+
+ASUS_LED(mled, "mail");
+ASUS_LED(tled, "touchpad");
+ASUS_LED(rled, "record");
+ASUS_LED(pled, "phone");
+ASUS_LED(gled, "gaming");
+
+/*
+ * This function evaluates an ACPI method, given an int as parameter, the
+ * method is searched within the scope of the handle, can be NULL. The output
+ * of the method is written is output, which can also be NULL
+ *
+ * returns 0 if write is successful, -1 else.
+ */
+static int write_acpi_int(acpi_handle handle, const char *method, int val,
+                          struct acpi_buffer *output)
+{
+        struct acpi_object_list params; //list of input parameters (an int here)
+        union acpi_object in_obj;       //the only param we use
+        acpi_status status;
+
+        if (!handle)
+                return 0;
+
+        params.count = 1;
+        params.pointer = &in_obj;
+        in_obj.type = ACPI_TYPE_INTEGER;
+        in_obj.integer.value = val;
+
+        status = acpi_evaluate_object(handle, (char *)method, &params, output);
+        if (status == AE_OK)
+                return 0;
+        else
+                return -1;
+}
+
+static int read_wireless_status(int mask)
+{
+        unsigned long long status;
+        acpi_status rv = AE_OK;
+
+        if (!wireless_status_handle)
+                return (hotk->status & mask) ? 1 : 0;
+
+        rv = acpi_evaluate_integer(wireless_status_handle, NULL, NULL, &status);
+        if (ACPI_FAILURE(rv))
+                printk(ASUS_WARNING "Error reading Wireless status\n");
+        else
+                return (status & mask) ? 1 : 0;
+
+        return (hotk->status & mask) ? 1 : 0;
+}
+
+static int read_gps_status(void)
+{
+        unsigned long long status;
+        acpi_status rv = AE_OK;
+
+        rv = acpi_evaluate_integer(gps_status_handle, NULL, NULL, &status);
+        if (ACPI_FAILURE(rv))
+                printk(ASUS_WARNING "Error reading GPS status\n");
+        else
+                return status ? 1 : 0;
+
+        return (hotk->status & GPS_ON) ? 1 : 0;
+}
+
+/* Generic LED functions */
+static int read_status(int mask)
+{
+        /* There is a special method for both wireless devices */
+        if (mask == BT_ON || mask == WL_ON)
+                return read_wireless_status(mask);
+        else if (mask == GPS_ON)
+                return read_gps_status();
+
+        return (hotk->status & mask) ? 1 : 0;
+}
+
+static void write_status(acpi_handle handle, int out, int mask)
+{
+        hotk->status = (out) ? (hotk->status | mask) : (hotk->status & ~mask);
+
+        switch (mask) {
+        case MLED_ON:
+                out = !(out & 0x1);
+                break;
+        case GLED_ON:
+                out = (out & 0x1) + 1;
+                break;
+        case GPS_ON:
+                handle = (out) ? gps_on_handle : gps_off_handle;
+                out = 0x02;
+                break;
+        default:
+                out &= 0x1;
+                break;
+        }
+
+        if (write_acpi_int(handle, NULL, out, NULL))
+                printk(ASUS_WARNING " write failed %x\n", mask);
+}
+
+/* /sys/class/led handlers */
+#define ASUS_LED_HANDLER(object, mask)                                  \
+        static void object##_led_set(struct led_classdev *led_cdev,     \
+                                     enum led_brightness value)         \
+        {                                                               \
+                object##_led_wk = (value > 0) ? 1 : 0;                  \
+                queue_work(led_workqueue, &object##_led_work);          \
+        }                                                               \
+        static void object##_led_update(struct work_struct *ignored)    \
+        {                                                               \
+                int value = object##_led_wk;                            \
+                write_status(object##_set_handle, value, (mask));       \
+        }
+
+ASUS_LED_HANDLER(mled, MLED_ON);
+ASUS_LED_HANDLER(pled, PLED_ON);
+ASUS_LED_HANDLER(rled, RLED_ON);
+ASUS_LED_HANDLER(tled, TLED_ON);
+ASUS_LED_HANDLER(gled, GLED_ON);
+
+static int get_lcd_state(void)
+{
+        return read_status(LCD_ON);
+}
+
+static int set_lcd_state(int value)
+{
+        int lcd = 0;
+        acpi_status status = 0;
+
+        lcd = value ? 1 : 0;
+
+        if (lcd == get_lcd_state())
+                return 0;
+
+        if (lcd_switch_handle) {
+                status = acpi_evaluate_object(lcd_switch_handle,
+                                              NULL, NULL, NULL);
+
+                if (ACPI_FAILURE(status))
+                        printk(ASUS_WARNING "Error switching LCD\n");
+        }
+
+        write_status(NULL, lcd, LCD_ON);
+        return 0;
+}
+
+static void lcd_blank(int blank)
+{
+        struct backlight_device *bd = asus_backlight_device;
+
+        if (bd) {
+                bd->props.power = blank;
+                backlight_update_status(bd);
+        }
+}
+
+static int read_brightness(struct backlight_device *bd)
+{
+        unsigned long long value;
+        acpi_status rv = AE_OK;
+
+        rv = acpi_evaluate_integer(brightness_get_handle, NULL, NULL, &value);
+        if (ACPI_FAILURE(rv))
+                printk(ASUS_WARNING "Error reading brightness\n");
+
+        return value;
+}
+
+static int set_brightness(struct backlight_device *bd, int value)
+{
+        int ret = 0;
+
+        value = (0 < value) ? ((15 < value) ? 15 : value) : 0;
+        /* 0 <= value <= 15 */
+
+        if (write_acpi_int(brightness_set_handle, NULL, value, NULL)) {
+                printk(ASUS_WARNING "Error changing brightness\n");
+                ret = -EIO;
+        }
+
+        return ret;
+}
+
+static int update_bl_status(struct backlight_device *bd)
+{
+        int rv;
+        int value = bd->props.brightness;
+
+        rv = set_brightness(bd, value);
+        if (rv)
+                return rv;
+
+        value = (bd->props.power == FB_BLANK_UNBLANK) ? 1 : 0;
+        return set_lcd_state(value);
+}
+
+/*
+ * Platform device handlers
+ */
+
+/*
+ * We write our info in page, we begin at offset off and cannot write more
+ * than count bytes. We set eof to 1 if we handle those 2 values. We return the
+ * number of bytes written in page
+ */
+static ssize_t show_infos(struct device *dev,
+                          struct device_attribute *attr, char *page)
+{
+        int len = 0;
+        unsigned long long temp;
+        char buf[16];           //enough for all info
+        acpi_status rv = AE_OK;
+
+        /*
+         * We use the easy way, we don't care of off and count, so we don't set eof
+         * to 1
+         */
+
+        len += sprintf(page, ASUS_HOTK_NAME " " ASUS_LAPTOP_VERSION "\n");
+        len += sprintf(page + len, "Model reference    : %s\n", hotk->name);
+        /*
+         * The SFUN method probably allows the original driver to get the list
+         * of features supported by a given model. For now, 0x0100 or 0x0800
+         * bit signifies that the laptop is equipped with a Wi-Fi MiniPCI card.
+         * The significance of others is yet to be found.
+         */
+        rv = acpi_evaluate_integer(hotk->handle, "SFUN", NULL, &temp);
+        if (!ACPI_FAILURE(rv))
+                len += sprintf(page + len, "SFUN value         : 0x%04x\n",
+                               (uint) temp);
+        /*
+         * Another value for userspace: the ASYM method returns 0x02 for
+         * battery low and 0x04 for battery critical, its readings tend to be
+         * more accurate than those provided by _BST.
+         * Note: since not all the laptops provide this method, errors are
+         * silently ignored.
+         */
+        rv = acpi_evaluate_integer(hotk->handle, "ASYM", NULL, &temp);
+        if (!ACPI_FAILURE(rv))
+                len += sprintf(page + len, "ASYM value         : 0x%04x\n",
+                               (uint) temp);
+        if (asus_info) {
+                snprintf(buf, 16, "%d", asus_info->length);
+                len += sprintf(page + len, "DSDT length        : %s\n", buf);
+                snprintf(buf, 16, "%d", asus_info->checksum);
+                len += sprintf(page + len, "DSDT checksum      : %s\n", buf);
+                snprintf(buf, 16, "%d", asus_info->revision);
+                len += sprintf(page + len, "DSDT revision      : %s\n", buf);
+                snprintf(buf, 7, "%s", asus_info->oem_id);
+                len += sprintf(page + len, "OEM id             : %s\n", buf);
+                snprintf(buf, 9, "%s", asus_info->oem_table_id);
+                len += sprintf(page + len, "OEM table id       : %s\n", buf);
+                snprintf(buf, 16, "%x", asus_info->oem_revision);
+                len += sprintf(page + len, "OEM revision       : 0x%s\n", buf);
+                snprintf(buf, 5, "%s", asus_info->asl_compiler_id);
+                len += sprintf(page + len, "ASL comp vendor id : %s\n", buf);
+                snprintf(buf, 16, "%x", asus_info->asl_compiler_revision);
+                len += sprintf(page + len, "ASL comp revision  : 0x%s\n", buf);
+        }
+
+        return len;
+}
+
+static int parse_arg(const char *buf, unsigned long count, int *val)
+{
+        if (!count)
+                return 0;
+        if (count > 31)
+                return -EINVAL;
+        if (sscanf(buf, "%i", val) != 1)
+                return -EINVAL;
+        return count;
+}
+
+static ssize_t store_status(const char *buf, size_t count,
+                            acpi_handle handle, int mask)
+{
+        int rv, value;
+        int out = 0;
+
+        rv = parse_arg(buf, count, &value);
+        if (rv > 0)
+                out = value ? 1 : 0;
+
+        write_status(handle, out, mask);
+
+        return rv;
+}
+
+/*
+ * LEDD display
+ */
+static ssize_t show_ledd(struct device *dev,
+                         struct device_attribute *attr, char *buf)
+{
+        return sprintf(buf, "0x%08x\n", hotk->ledd_status);
+}
+
+static ssize_t store_ledd(struct device *dev, struct device_attribute *attr,
+                          const char *buf, size_t count)
+{
+        int rv, value;
+
+        rv = parse_arg(buf, count, &value);
+        if (rv > 0) {
+                if (write_acpi_int(ledd_set_handle, NULL, value, NULL))
+                        printk(ASUS_WARNING "LED display write failed\n");
+                else
+                        hotk->ledd_status = (u32) value;
+        }
+        return rv;
+}
+
+/*
+ * WLAN
+ */
+static ssize_t show_wlan(struct device *dev,
+                         struct device_attribute *attr, char *buf)
+{
+        return sprintf(buf, "%d\n", read_status(WL_ON));
+}
+
+static ssize_t store_wlan(struct device *dev, struct device_attribute *attr,
+                          const char *buf, size_t count)
+{
+        return store_status(buf, count, wl_switch_handle, WL_ON);
+}
+
+/*
+ * Bluetooth
+ */
+static ssize_t show_bluetooth(struct device *dev,
+                              struct device_attribute *attr, char *buf)
+{
+        return sprintf(buf, "%d\n", read_status(BT_ON));
+}
+
+static ssize_t store_bluetooth(struct device *dev,
+                               struct device_attribute *attr, const char *buf,
+                               size_t count)
+{
+        return store_status(buf, count, bt_switch_handle, BT_ON);
+}
+
+/*
+ * Display
+ */
+static void set_display(int value)
+{
+        /* no sanity check needed for now */
+        if (write_acpi_int(display_set_handle, NULL, value, NULL))
+                printk(ASUS_WARNING "Error setting display\n");
+        return;
+}
+
+static int read_display(void)
+{
+        unsigned long long value = 0;
+        acpi_status rv = AE_OK;
+
+        /* In most of the case, we know how to set the display, but sometime
+           we can't read it */
+        if (display_get_handle) {
+                rv = acpi_evaluate_integer(display_get_handle, NULL,
+                                           NULL, &value);
+                if (ACPI_FAILURE(rv))
+                        printk(ASUS_WARNING "Error reading display status\n");
+        }
+
+        value &= 0x0F;          /* needed for some models, shouldn't hurt others */
+
+        return value;
+}
+
+/*
+ * Now, *this* one could be more user-friendly, but so far, no-one has
+ * complained. The significance of bits is the same as in store_disp()
+ */
+static ssize_t show_disp(struct device *dev,
+                         struct device_attribute *attr, char *buf)
+{
+        return sprintf(buf, "%d\n", read_display());
+}
+
+/*
+ * Experimental support for display switching. As of now: 1 should activate
+ * the LCD output, 2 should do for CRT, 4 for TV-Out and 8 for DVI.
+ * Any combination (bitwise) of these will suffice. I never actually tested 4
+ * displays hooked up simultaneously, so be warned. See the acpi4asus README
+ * for more info.
+ */
+static ssize_t store_disp(struct device *dev, struct device_attribute *attr,
+                          const char *buf, size_t count)
+{
+        int rv, value;
+
+        rv = parse_arg(buf, count, &value);
+        if (rv > 0)
+                set_display(value);
+        return rv;
+}
+
+/*
+ * Light Sens
+ */
+static void set_light_sens_switch(int value)
+{
+        if (write_acpi_int(ls_switch_handle, NULL, value, NULL))
+                printk(ASUS_WARNING "Error setting light sensor switch\n");
+        hotk->light_switch = value;
+}
+
+static ssize_t show_lssw(struct device *dev,
+                         struct device_attribute *attr, char *buf)
+{
+        return sprintf(buf, "%d\n", hotk->light_switch);
+}
+
+static ssize_t store_lssw(struct device *dev, struct device_attribute *attr,
+                          const char *buf, size_t count)
+{
+        int rv, value;
+
+        rv = parse_arg(buf, count, &value);
+        if (rv > 0)
+                set_light_sens_switch(value ? 1 : 0);
+
+        return rv;
+}
+
+static void set_light_sens_level(int value)
+{
+        if (write_acpi_int(ls_level_handle, NULL, value, NULL))
+                printk(ASUS_WARNING "Error setting light sensor level\n");
+        hotk->light_level = value;
+}
+
+static ssize_t show_lslvl(struct device *dev,
+                          struct device_attribute *attr, char *buf)
+{
+        return sprintf(buf, "%d\n", hotk->light_level);
+}
+
+static ssize_t store_lslvl(struct device *dev, struct device_attribute *attr,
+                           const char *buf, size_t count)
+{
+        int rv, value;
+
+        rv = parse_arg(buf, count, &value);
+        if (rv > 0) {
+                value = (0 < value) ? ((15 < value) ? 15 : value) : 0;
+                /* 0 <= value <= 15 */
+                set_light_sens_level(value);
+        }
+
+        return rv;
+}
+
+/*
+ * GPS
+ */
+static ssize_t show_gps(struct device *dev,
+                        struct device_attribute *attr, char *buf)
+{
+        return sprintf(buf, "%d\n", read_status(GPS_ON));
+}
+
+static ssize_t store_gps(struct device *dev, struct device_attribute *attr,
+                         const char *buf, size_t count)
+{
+        return store_status(buf, count, NULL, GPS_ON);
+}
+
+static void asus_hotk_notify(acpi_handle handle, u32 event, void *data)
+{
+        /* TODO Find a better way to handle events count. */
+        if (!hotk)
+                return;
+
+        /*
+         * We need to tell the backlight device when the backlight power is
+         * switched
+         */
+        if (event == ATKD_LCD_ON) {
+                write_status(NULL, 1, LCD_ON);
+                lcd_blank(FB_BLANK_UNBLANK);
+        } else if (event == ATKD_LCD_OFF) {
+                write_status(NULL, 0, LCD_ON);
+                lcd_blank(FB_BLANK_POWERDOWN);
+        }
+
+        acpi_bus_generate_proc_event(hotk->device, event,
+                                hotk->event_count[event % 128]++);
+
+        return;
+}
+
+#define ASUS_CREATE_DEVICE_ATTR(_name)                                  \
+        struct device_attribute dev_attr_##_name = {                    \
+                .attr = {                                               \
+                        .name = __stringify(_name),                     \
+                        .mode = 0 },                                    \
+                .show   = NULL,                                         \
+                .store  = NULL,                                         \
+        }
+
+#define ASUS_SET_DEVICE_ATTR(_name, _mode, _show, _store)               \
+        do {                                                            \
+                dev_attr_##_name.attr.mode = _mode;                     \
+                dev_attr_##_name.show = _show;                          \
+                dev_attr_##_name.store = _store;                        \
+        } while(0)
+
+static ASUS_CREATE_DEVICE_ATTR(infos);
+static ASUS_CREATE_DEVICE_ATTR(wlan);
+static ASUS_CREATE_DEVICE_ATTR(bluetooth);
+static ASUS_CREATE_DEVICE_ATTR(display);
+static ASUS_CREATE_DEVICE_ATTR(ledd);
+static ASUS_CREATE_DEVICE_ATTR(ls_switch);
+static ASUS_CREATE_DEVICE_ATTR(ls_level);
+static ASUS_CREATE_DEVICE_ATTR(gps);
+
+static struct attribute *asuspf_attributes[] = {
+        &dev_attr_infos.attr,
+        &dev_attr_wlan.attr,
+        &dev_attr_bluetooth.attr,
+        &dev_attr_display.attr,
+        &dev_attr_ledd.attr,
+        &dev_attr_ls_switch.attr,
+        &dev_attr_ls_level.attr,
+        &dev_attr_gps.attr,
+        NULL
+};
+
+static struct attribute_group asuspf_attribute_group = {
+        .attrs = asuspf_attributes
+};
+
+static struct platform_driver asuspf_driver = {
+        .driver = {
+                   .name = ASUS_HOTK_FILE,
+                   .owner = THIS_MODULE,
+                   }
+};
+
+static struct platform_device *asuspf_device;
+
+static void asus_hotk_add_fs(void)
+{
+        ASUS_SET_DEVICE_ATTR(infos, 0444, show_infos, NULL);
+
+        if (wl_switch_handle)
+                ASUS_SET_DEVICE_ATTR(wlan, 0644, show_wlan, store_wlan);
+
+        if (bt_switch_handle)
+                ASUS_SET_DEVICE_ATTR(bluetooth, 0644,
+                                     show_bluetooth, store_bluetooth);
+
+        if (display_set_handle && display_get_handle)
+                ASUS_SET_DEVICE_ATTR(display, 0644, show_disp, store_disp);
+        else if (display_set_handle)
+                ASUS_SET_DEVICE_ATTR(display, 0200, NULL, store_disp);
+
+        if (ledd_set_handle)
+                ASUS_SET_DEVICE_ATTR(ledd, 0644, show_ledd, store_ledd);
+
+        if (ls_switch_handle && ls_level_handle) {
+                ASUS_SET_DEVICE_ATTR(ls_level, 0644, show_lslvl, store_lslvl);
+                ASUS_SET_DEVICE_ATTR(ls_switch, 0644, show_lssw, store_lssw);
+        }
+
+        if (gps_status_handle && gps_on_handle && gps_off_handle)
+                ASUS_SET_DEVICE_ATTR(gps, 0644, show_gps, store_gps);
+}
+
+static int asus_handle_init(char *name, acpi_handle * handle,
+                            char **paths, int num_paths)
+{
+        int i;
+        acpi_status status;
+
+        for (i = 0; i < num_paths; i++) {
+                status = acpi_get_handle(NULL, paths[i], handle);
+                if (ACPI_SUCCESS(status))
+                        return 0;
+        }
+
+        *handle = NULL;
+        return -ENODEV;
+}
+
+#define ASUS_HANDLE_INIT(object)                                        \
+        asus_handle_init(#object, &object##_handle, object##_paths,     \
+                         ARRAY_SIZE(object##_paths))
+
+/*
+ * This function is used to initialize the hotk with right values. In this
+ * method, we can make all the detection we want, and modify the hotk struct
+ */
+static int asus_hotk_get_info(void)
+{
+        struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
+        union acpi_object *model = NULL;
+        unsigned long long bsts_result, hwrs_result;
+        char *string = NULL;
+        acpi_status status;
+
+        /*
+         * Get DSDT headers early enough to allow for differentiating between
+         * models, but late enough to allow acpi_bus_register_driver() to fail
+         * before doing anything ACPI-specific. Should we encounter a machine,
+         * which needs special handling (i.e. its hotkey device has a different
+         * HID), this bit will be moved. A global variable asus_info contains
+         * the DSDT header.
+         */
+        status = acpi_get_table(ACPI_SIG_DSDT, 1, &asus_info);
+        if (ACPI_FAILURE(status))
+                printk(ASUS_WARNING "Couldn't get the DSDT table header\n");
+
+        /* We have to write 0 on init this far for all ASUS models */
+        if (write_acpi_int(hotk->handle, "INIT", 0, &buffer)) {
+                printk(ASUS_ERR "Hotkey initialization failed\n");
+                return -ENODEV;
+        }
+
+        /* This needs to be called for some laptops to init properly */
+        status =
+            acpi_evaluate_integer(hotk->handle, "BSTS", NULL, &bsts_result);
+        if (ACPI_FAILURE(status))
+                printk(ASUS_WARNING "Error calling BSTS\n");
+        else if (bsts_result)
+                printk(ASUS_NOTICE "BSTS called, 0x%02x returned\n",
+                       (uint) bsts_result);
+
+        /* This too ... */
+        write_acpi_int(hotk->handle, "CWAP", wapf, NULL);
+
+        /*
+         * Try to match the object returned by INIT to the specific model.
+         * Handle every possible object (or the lack of thereof) the DSDT
+         * writers might throw at us. When in trouble, we pass NULL to
+         * asus_model_match() and try something completely different.
+         */
+        if (buffer.pointer) {
+                model = buffer.pointer;
+                switch (model->type) {
+                case ACPI_TYPE_STRING:
+                        string = model->string.pointer;
+                        break;
+                case ACPI_TYPE_BUFFER:
+                        string = model->buffer.pointer;
+                        break;
+                default:
+                        string = "";
+                        break;
+                }
+        }
+        hotk->name = kstrdup(string, GFP_KERNEL);
+        if (!hotk->name)
+                return -ENOMEM;
+
+        if (*string)
+                printk(ASUS_NOTICE "  %s model detected\n", string);
+
+        ASUS_HANDLE_INIT(mled_set);
+        ASUS_HANDLE_INIT(tled_set);
+        ASUS_HANDLE_INIT(rled_set);
+        ASUS_HANDLE_INIT(pled_set);
+        ASUS_HANDLE_INIT(gled_set);
+
+        ASUS_HANDLE_INIT(ledd_set);
+
+        /*
+         * The HWRS method return informations about the hardware.
+         * 0x80 bit is for WLAN, 0x100 for Bluetooth.
+         * The significance of others is yet to be found.
+         * If we don't find the method, we assume the device are present.
+         */
+        status =
+            acpi_evaluate_integer(hotk->handle, "HRWS", NULL, &hwrs_result);
+        if (ACPI_FAILURE(status))
+                hwrs_result = WL_HWRS | BT_HWRS;
+
+        if (hwrs_result & WL_HWRS)
+                ASUS_HANDLE_INIT(wl_switch);
+        if (hwrs_result & BT_HWRS)
+                ASUS_HANDLE_INIT(bt_switch);
+
+        ASUS_HANDLE_INIT(wireless_status);
+
+        ASUS_HANDLE_INIT(brightness_set);
+        ASUS_HANDLE_INIT(brightness_get);
+
+        ASUS_HANDLE_INIT(lcd_switch);
+
+        ASUS_HANDLE_INIT(display_set);
+        ASUS_HANDLE_INIT(display_get);
+
+        /* There is a lot of models with "ALSL", but a few get
+           a real light sens, so we need to check it. */
+        if (!ASUS_HANDLE_INIT(ls_switch))
+                ASUS_HANDLE_INIT(ls_level);
+
+        ASUS_HANDLE_INIT(gps_on);
+        ASUS_HANDLE_INIT(gps_off);
+        ASUS_HANDLE_INIT(gps_status);
+
+        kfree(model);
+
+        return AE_OK;
+}
+
+static int asus_hotk_check(void)
+{
+        int result = 0;
+
+        result = acpi_bus_get_status(hotk->device);
+        if (result)
+                return result;
+
+        if (hotk->device->status.present) {
+                result = asus_hotk_get_info();
+        } else {
+                printk(ASUS_ERR "Hotkey device not present, aborting\n");
+                return -EINVAL;
+        }
+
+        return result;
+}
+
+static int asus_hotk_found;
+
+static int asus_hotk_add(struct acpi_device *device)
+{
+        acpi_status status = AE_OK;
+        int result;
+
+        if (!device)
+                return -EINVAL;
+
+        printk(ASUS_NOTICE "Asus Laptop Support version %s\n",
+               ASUS_LAPTOP_VERSION);
+
+        hotk = kzalloc(sizeof(struct asus_hotk), GFP_KERNEL);
+        if (!hotk)
+                return -ENOMEM;
+
+        hotk->handle = device->handle;
+        strcpy(acpi_device_name(device), ASUS_HOTK_DEVICE_NAME);
+        strcpy(acpi_device_class(device), ASUS_HOTK_CLASS);
+        device->driver_data = hotk;
+        hotk->device = device;
+
+        result = asus_hotk_check();
+        if (result)
+                goto end;
+
+        asus_hotk_add_fs();
+
+        /*
+         * We install the handler, it will receive the hotk in parameter, so, we
+         * could add other data to the hotk struct
+         */
+        status = acpi_install_notify_handler(hotk->handle, ACPI_ALL_NOTIFY,
+                                             asus_hotk_notify, hotk);
+        if (ACPI_FAILURE(status))
+                printk(ASUS_ERR "Error installing notify handler\n");
+
+        asus_hotk_found = 1;
+
+        /* WLED and BLED are on by default */
+        write_status(bt_switch_handle, 1, BT_ON);
+        write_status(wl_switch_handle, 1, WL_ON);
+
+        /* If the h/w switch is off, we need to check the real status */
+        write_status(NULL, read_status(BT_ON), BT_ON);
+        write_status(NULL, read_status(WL_ON), WL_ON);
+
+        /* LCD Backlight is on by default */
+        write_status(NULL, 1, LCD_ON);
+
+        /* LED display is off by default */
+        hotk->ledd_status = 0xFFF;
+
+        /* Set initial values of light sensor and level */
+        hotk->light_switch = 1; /* Default to light sensor disabled */
+        hotk->light_level = 0;  /* level 5 for sensor sensitivity */
+
+        if (ls_switch_handle)
+                set_light_sens_switch(hotk->light_switch);
+
+        if (ls_level_handle)
+                set_light_sens_level(hotk->light_level);
+
+        /* GPS is on by default */
+        write_status(NULL, 1, GPS_ON);
+
+      end:
+        if (result) {
+                kfree(hotk->name);
+                kfree(hotk);
+        }
+
+        return result;
+}
+
+static int asus_hotk_remove(struct acpi_device *device, int type)
+{
+        acpi_status status = 0;
+
+        if (!device || !acpi_driver_data(device))
+                return -EINVAL;
+
+        status = acpi_remove_notify_handler(hotk->handle, ACPI_ALL_NOTIFY,
+                                            asus_hotk_notify);
+        if (ACPI_FAILURE(status))
+                printk(ASUS_ERR "Error removing notify handler\n");
+
+        kfree(hotk->name);
+        kfree(hotk);
+
+        return 0;
+}
+
+static void asus_backlight_exit(void)
+{
+        if (asus_backlight_device)
+                backlight_device_unregister(asus_backlight_device);
+}
+
+#define  ASUS_LED_UNREGISTER(object)                            \
+        if (object##_led.dev)                                   \
+                led_classdev_unregister(&object##_led)
+
+static void asus_led_exit(void)
+{
+        destroy_workqueue(led_workqueue);
+        ASUS_LED_UNREGISTER(mled);
+        ASUS_LED_UNREGISTER(tled);
+        ASUS_LED_UNREGISTER(pled);
+        ASUS_LED_UNREGISTER(rled);
+        ASUS_LED_UNREGISTER(gled);
+}
+
+static void __exit asus_laptop_exit(void)
+{
+        asus_backlight_exit();
+        asus_led_exit();
+
+        acpi_bus_unregister_driver(&asus_hotk_driver);
+        sysfs_remove_group(&asuspf_device->dev.kobj, &asuspf_attribute_group);
+        platform_device_unregister(asuspf_device);
+        platform_driver_unregister(&asuspf_driver);
+}
+
+static int asus_backlight_init(struct device *dev)
+{
+        struct backlight_device *bd;
+
+        if (brightness_set_handle && lcd_switch_handle) {
+                bd = backlight_device_register(ASUS_HOTK_FILE, dev,
+                                               NULL, &asusbl_ops);
+                if (IS_ERR(bd)) {
+                        printk(ASUS_ERR
+                               "Could not register asus backlight device\n");
+                        asus_backlight_device = NULL;
+                        return PTR_ERR(bd);
+                }
+
+                asus_backlight_device = bd;
+
+                bd->props.max_brightness = 15;
+                bd->props.brightness = read_brightness(NULL);
+                bd->props.power = FB_BLANK_UNBLANK;
+                backlight_update_status(bd);
+        }
+        return 0;
+}
+
+static int asus_led_register(acpi_handle handle,
+                             struct led_classdev *ldev, struct device *dev)
+{
+        if (!handle)
+                return 0;
+
+        return led_classdev_register(dev, ldev);
+}
+
+#define ASUS_LED_REGISTER(object, device)                               \
+        asus_led_register(object##_set_handle, &object##_led, device)
+
+static int asus_led_init(struct device *dev)
+{
+        int rv;
+
+        rv = ASUS_LED_REGISTER(mled, dev);
+        if (rv)
+                goto out;
+
+        rv = ASUS_LED_REGISTER(tled, dev);
+        if (rv)
+                goto out1;
+
+        rv = ASUS_LED_REGISTER(rled, dev);
+        if (rv)
+                goto out2;
+
+        rv = ASUS_LED_REGISTER(pled, dev);
+        if (rv)
+                goto out3;
+
+        rv = ASUS_LED_REGISTER(gled, dev);
+        if (rv)
+                goto out4;
+
+        led_workqueue = create_singlethread_workqueue("led_workqueue");
+        if (!led_workqueue)
+                goto out5;
+
+        return 0;
+out5:
+        rv = -ENOMEM;
+        ASUS_LED_UNREGISTER(gled);
+out4:
+        ASUS_LED_UNREGISTER(pled);
+out3:
+        ASUS_LED_UNREGISTER(rled);
+out2:
+        ASUS_LED_UNREGISTER(tled);
+out1:
+        ASUS_LED_UNREGISTER(mled);
+out:
+        return rv;
+}
+
+static int __init asus_laptop_init(void)
+{
+        struct device *dev;
+        int result;
+
+        if (acpi_disabled)
+                return -ENODEV;
+
+        result = acpi_bus_register_driver(&asus_hotk_driver);
+        if (result < 0)
+                return result;
+
+        /*
+         * This is a bit of a kludge.  We only want this module loaded
+         * for ASUS systems, but there's currently no way to probe the
+         * ACPI namespace for ASUS HIDs.  So we just return failure if
+         * we didn't find one, which will cause the module to be
+         * unloaded.
+         */
+        if (!asus_hotk_found) {
+                acpi_bus_unregister_driver(&asus_hotk_driver);
+                return -ENODEV;
+        }
+
+        dev = acpi_get_physical_device(hotk->device->handle);
+
+        if (!acpi_video_backlight_support()) {
+                result = asus_backlight_init(dev);
+                if (result)
+                        goto fail_backlight;
+        } else
+                printk(ASUS_INFO "Brightness ignored, must be controlled by "
+                       "ACPI video driver\n");
+
+        result = asus_led_init(dev);
+        if (result)
+                goto fail_led;
+
+        /* Register platform stuff */
+        result = platform_driver_register(&asuspf_driver);
+        if (result)
+                goto fail_platform_driver;
+
+        asuspf_device = platform_device_alloc(ASUS_HOTK_FILE, -1);
+        if (!asuspf_device) {
+                result = -ENOMEM;
+                goto fail_platform_device1;
+        }
+
+        result = platform_device_add(asuspf_device);
+        if (result)
+                goto fail_platform_device2;
+
+        result = sysfs_create_group(&asuspf_device->dev.kobj,
+                                    &asuspf_attribute_group);
+        if (result)
+                goto fail_sysfs;
+
+        return 0;
+
+      fail_sysfs:
+        platform_device_del(asuspf_device);
+
+      fail_platform_device2:
+        platform_device_put(asuspf_device);
+
+      fail_platform_device1:
+        platform_driver_unregister(&asuspf_driver);
+
+      fail_platform_driver:
+        asus_led_exit();
+
+      fail_led:
+        asus_backlight_exit();
+
+      fail_backlight:
+
+        return result;
+}
+
+module_init(asus_laptop_init);
+module_exit(asus_laptop_exit);