[PATCH] yenta TI: turn off interrupts during card power-on #2

- make boot-up card recognition more reliable (ie.  redo interrogation
  always if there is no valid 'card inserted' state) (and yes, i saw it
  happening on an o2micro controller that both CB_CBARD and CB_16BITCARD
  bits were set at the same time)

- also redo interrogation before probing the ISA interrupts.  it's safer
  to do the probing with the socket in a clean state.

- make card insert detect more reliable.  yenta_get_status() now returns
  SS_PENDING as long as the card is not completley inserted and one of the
  voltage bits is set.  also !CB_CBARD doesn't mean CB_16BITCARD.  there is
  CB_NOTACARD as well, so make an explicit check for CB_16BITCARD.

- for TI bridges: disable IRQs during power-on.  in all-serial and tied
  interrupt mode the interrupts are always disabled for single-slot
  controllers.  for two-slot contollers the disabling is only done when the
  other slot is empty.  to force disabling there is a new module parameter
  now: pwr_irqs_off=Y (which is a regression for working setups.  that's
  why it's an option, only use when required)

- modparm to disable ISA interrupt probing (isa_probe, defaults to on)

- remove unneeded code/cleanups (ie.  merge yenta_events() into
  yenta_interrupts())

Signed-off-by: Daniel Ritz <daniel.ritz@gmx.ch>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

1 files changed, 38 insertions, 22 deletions

diff --git a/drivers/pcmcia/yenta_socket.c b/drivers/pcmcia/yenta_socket.c
index 6404d97a12eb..bee05362fd24 100644
--- a/drivers/pcmcia/yenta_socket.c
+++ b/drivers/pcmcia/yenta_socket.c
@@ -32,6 +32,14 @@ static int disable_clkrun;
 module_param(disable_clkrun, bool, 0444);
 MODULE_PARM_DESC(disable_clkrun, "If PC card doesn't function properly, please try this option");
 
+static int isa_probe = 1;
+module_param(isa_probe, bool, 0444);
+MODULE_PARM_DESC(isa_probe, "If set ISA interrupts are probed (default). Set to N to disable probing");
+
+static int pwr_irqs_off;
+module_param(pwr_irqs_off, bool, 0644);
+MODULE_PARM_DESC(pwr_irqs_off, "Force IRQs off during power-on of slot. Use only when seeing IRQ storms!");
+
 #if 0
 #define debug(x,args...) printk(KERN_DEBUG "%s: " x, __func__ , ##args)
 #else
@@ -150,15 +158,16 @@ static int yenta_get_status(struct pcmcia_socket *sock, unsigned int *value)
 
         val  = (state & CB_3VCARD) ? SS_3VCARD : 0;
         val |= (state & CB_XVCARD) ? SS_XVCARD : 0;
-        val |= (state & (CB_CDETECT1 | CB_CDETECT2 | CB_5VCARD | CB_3VCARD
-                         | CB_XVCARD | CB_YVCARD)) ? 0 : SS_PENDING;
+        val |= (state & (CB_5VCARD | CB_3VCARD | CB_XVCARD | CB_YVCARD)) ? 0 : SS_PENDING;
+        val |= (state & (CB_CDETECT1 | CB_CDETECT2)) ? SS_PENDING : 0;
+
 
         if (state & CB_CBCARD) {
                 val |= SS_CARDBUS;      
                 val |= (state & CB_CARDSTS) ? SS_STSCHG : 0;
                 val |= (state & (CB_CDETECT1 | CB_CDETECT2)) ? 0 : SS_DETECT;
                 val |= (state & CB_PWRCYCLE) ? SS_POWERON | SS_READY : 0;
-        } else {
+        } else if (state & CB_16BITCARD) {
                 u8 status = exca_readb(socket, I365_STATUS);
                 val |= ((status & I365_CS_DETECT) == I365_CS_DETECT) ? SS_DETECT : 0;
                 if (exca_readb(socket, I365_INTCTL) & I365_PC_IOCARD) {
@@ -405,11 +414,13 @@ static int yenta_set_mem_map(struct pcmcia_socket *sock, struct pccard_mem_map *
 }
 
 
-static unsigned int yenta_events(struct yenta_socket *socket)
+
+static irqreturn_t yenta_interrupt(int irq, void *dev_id, struct pt_regs *regs)
 {
+        unsigned int events;
+        struct yenta_socket *socket = (struct yenta_socket *) dev_id;
         u8 csc;
         u32 cb_event;
-        unsigned int events;
 
         /* Clear interrupt status for the event */
         cb_event = cb_readl(socket, CB_SOCKET_EVENT);
@@ -426,20 +437,13 @@ static unsigned int yenta_events(struct yenta_socket *socket)
                 events |= (csc & I365_CSC_BVD2) ? SS_BATWARN : 0;
                 events |= (csc & I365_CSC_READY) ? SS_READY : 0;
         }
-        return events;
-}
-
-
-static irqreturn_t yenta_interrupt(int irq, void *dev_id, struct pt_regs *regs)
-{
-        unsigned int events;
-        struct yenta_socket *socket = (struct yenta_socket *) dev_id;
 
-        events = yenta_events(socket);
-        if (events) {
+        if (events)
                 pcmcia_parse_events(&socket->socket, events);
+
+        if (cb_event || csc)
                 return IRQ_HANDLED;
-        }
+
         return IRQ_NONE;
 }
 
@@ -470,11 +474,22 @@ static void yenta_clear_maps(struct yenta_socket *socket)
         }
 }
 
+/* redoes voltage interrogation if required */
+static void yenta_interrogate(struct yenta_socket *socket)
+{
+        u32 state;
+
+        state = cb_readl(socket, CB_SOCKET_STATE);
+        if (!(state & (CB_5VCARD | CB_3VCARD | CB_XVCARD | CB_YVCARD)) ||
+            (state & (CB_CDETECT1 | CB_CDETECT2 | CB_NOTACARD | CB_BADVCCREQ)) ||
+            ((state & (CB_16BITCARD | CB_CBCARD)) == (CB_16BITCARD | CB_CBCARD)))
+                cb_writel(socket, CB_SOCKET_FORCE, CB_CVSTEST);
+}
+
 /* Called at resume and initialization events */
 static int yenta_sock_init(struct pcmcia_socket *sock)
 {
         struct yenta_socket *socket = container_of(sock, struct yenta_socket, socket);
-        u32 state;
         u16 bridge;
 
         bridge = config_readw(socket, CB_BRIDGE_CONTROL) & ~CB_BRIDGE_INTR;
@@ -486,10 +501,7 @@ static int yenta_sock_init(struct pcmcia_socket *sock)
         exca_writeb(socket, I365_GENCTL, 0x00);
 
         /* Redo card voltage interrogation */
-        state = cb_readl(socket, CB_SOCKET_STATE);
-        if (!(state & (CB_CDETECT1 | CB_CDETECT2 | CB_5VCARD |
-                       CB_3VCARD | CB_XVCARD | CB_YVCARD)))
-                cb_writel(socket, CB_SOCKET_FORCE, CB_CVSTEST);
+        yenta_interrogate(socket);
 
         yenta_clear_maps(socket);
 
@@ -856,7 +868,10 @@ static void yenta_get_socket_capabilities(struct yenta_socket *socket, u32 isa_i
         socket->socket.features |= SS_CAP_PAGE_REGS | SS_CAP_PCCARD | SS_CAP_CARDBUS;
         socket->socket.map_size = 0x1000;
         socket->socket.pci_irq = socket->cb_irq;
-        socket->socket.irq_mask = yenta_probe_irq(socket, isa_irq_mask);
+        if (isa_probe)
+                socket->socket.irq_mask = yenta_probe_irq(socket, isa_irq_mask);
+        else
+                socket->socket.irq_mask = 0;
         socket->socket.cb_dev = socket->dev;
 
         printk(KERN_INFO "Yenta: ISA IRQ mask 0x%04x, PCI irq %d\n",
@@ -996,6 +1011,7 @@ static int __devinit yenta_probe (struct pci_dev *dev, const struct pci_device_i
         }
 
         /* Figure out what the dang thing can do for the PCMCIA layer... */
+        yenta_interrogate(socket);
         yenta_get_socket_capabilities(socket, isa_interrupts);
         printk(KERN_INFO "Socket status: %08x\n", cb_readl(socket, CB_SOCKET_STATE));