Merge branch 'master'

1 files changed, 105 insertions, 10 deletions

diff --git a/drivers/pcmcia/ti113x.h b/drivers/pcmcia/ti113x.h
index fbe233e19ceb..da0b404561c9 100644
--- a/drivers/pcmcia/ti113x.h
+++ b/drivers/pcmcia/ti113x.h
@@ -59,6 +59,7 @@
 
 #define  TI122X_SCR_SER_STEP            0xc0000000
 #define  TI122X_SCR_INTRTIE             0x20000000
+#define  TIXX21_SCR_TIEALL              0x10000000
 #define  TI122X_SCR_CBRSVD              0x00400000
 #define  TI122X_SCR_MRBURSTDN           0x00008000
 #define  TI122X_SCR_MRBURSTUP           0x00004000
@@ -153,6 +154,12 @@
 /* EnE test register */
 #define ENE_TEST_C9                     0xc9    /* 8bit */
 #define ENE_TEST_C9_TLTENABLE           0x02
+#define ENE_TEST_C9_PFENABLE_F0         0x04
+#define ENE_TEST_C9_PFENABLE_F1         0x08
+#define ENE_TEST_C9_PFENABLE            (ENE_TEST_C9_PFENABLE_F0 | ENE_TEST_C9_PFENABLE_F0)
+#define ENE_TEST_C9_WPDISALBLE_F0       0x40
+#define ENE_TEST_C9_WPDISALBLE_F1       0x80
+#define ENE_TEST_C9_WPDISALBLE          (ENE_TEST_C9_WPDISALBLE_F0 | ENE_TEST_C9_WPDISALBLE_F1)
 
 /*
  * Texas Instruments CardBus controller overrides.
@@ -618,6 +625,7 @@ static int ti12xx_2nd_slot_empty(struct yenta_socket *socket)
         int devfn;
         unsigned int state;
         int ret = 1;
+        u32 sysctl;
 
         /* catch the two-slot controllers */
         switch (socket->dev->device) {
@@ -640,6 +648,24 @@ static int ti12xx_2nd_slot_empty(struct yenta_socket *socket)
                  */
                 break;
 
+        case PCI_DEVICE_ID_TI_X515:
+        case PCI_DEVICE_ID_TI_X420:
+        case PCI_DEVICE_ID_TI_X620:
+        case PCI_DEVICE_ID_TI_XX21_XX11:
+        case PCI_DEVICE_ID_TI_7410:
+        case PCI_DEVICE_ID_TI_7610:
+                /*
+                 * those are either single or dual slot CB with additional functions
+                 * like 1394, smartcard reader, etc. check the TIEALL flag for them
+                 * the TIEALL flag binds the IRQ of all functions toghether.
+                 * we catch the single slot variants later.
+                 */
+                sysctl = config_readl(socket, TI113X_SYSTEM_CONTROL);
+                if (sysctl & TIXX21_SCR_TIEALL)
+                        return 0;
+
+                break;
+
         /* single-slot controllers have the 2nd slot empty always :) */
         default:
                 return 1;
@@ -652,6 +678,15 @@ static int ti12xx_2nd_slot_empty(struct yenta_socket *socket)
         if (!func)
                 return 1;
 
+        /*
+         * check that the device id of both slots match. this is needed for the
+         * XX21 and the XX11 controller that share the same device id for single
+         * and dual slot controllers. return '2nd slot empty'. we already checked
+         * if the interrupt is tied to another function.
+         */
+        if (socket->dev->device != func->device)
+                goto out;
+
         slot2 = pci_get_drvdata(func);
         if (!slot2)
                 goto out;
@@ -791,16 +826,6 @@ static int ti12xx_override(struct yenta_socket *socket)
                 config_writel(socket, TI113X_SYSTEM_CONTROL, val);
 
         /*
-         * for EnE bridges only: clear testbit TLTEnable. this makes the
-         * RME Hammerfall DSP sound card working.
-         */
-        if (socket->dev->vendor == PCI_VENDOR_ID_ENE) {
-                u8 test_c9 = config_readb(socket, ENE_TEST_C9);
-                test_c9 &= ~ENE_TEST_C9_TLTENABLE;
-                config_writeb(socket, ENE_TEST_C9, test_c9);
-        }
-
-        /*
          * Yenta expects controllers to use CSCINT to route
          * CSC interrupts to PCI rather than INTVAL.
          */
@@ -841,5 +866,75 @@ static int ti1250_override(struct yenta_socket *socket)
         return ti12xx_override(socket);
 }
 
+
+/**
+ * EnE specific part. EnE bridges are register compatible with TI bridges but
+ * have their own test registers and more important their own little problems.
+ * Some fixup code to make everybody happy (TM).
+ */
+
+/**
+ * set/clear various test bits:
+ * Defaults to clear the bit.
+ * - mask (u8) defines what bits to change
+ * - bits (u8) is the values to change them to
+ * -> it's
+ *      current = (current & ~mask) | bits
+ */
+/* pci ids of devices that wants to have the bit set */
+#define DEVID(_vend,_dev,_subvend,_subdev,mask,bits) {          \
+                .vendor         = _vend,                        \
+                .device         = _dev,                         \
+                .subvendor      = _subvend,                     \
+                .subdevice      = _subdev,                      \
+                .driver_data    = ((mask) << 8 | (bits)),       \
+        }
+static struct pci_device_id ene_tune_tbl[] = {
+        /* Echo Audio products based on motorola DSP56301 and DSP56361 */
+        DEVID(PCI_VENDOR_ID_MOTOROLA, 0x1801, 0xECC0, PCI_ANY_ID,
+                ENE_TEST_C9_TLTENABLE | ENE_TEST_C9_PFENABLE, ENE_TEST_C9_TLTENABLE),
+        DEVID(PCI_VENDOR_ID_MOTOROLA, 0x3410, 0xECC0, PCI_ANY_ID,
+                ENE_TEST_C9_TLTENABLE | ENE_TEST_C9_PFENABLE, ENE_TEST_C9_TLTENABLE),
+
+        {}
+};
+
+static void ene_tune_bridge(struct pcmcia_socket *sock, struct pci_bus *bus)
+{
+        struct yenta_socket *socket = container_of(sock, struct yenta_socket, socket);
+        struct pci_dev *dev;
+        struct pci_device_id *id = NULL;
+        u8 test_c9, old_c9, mask, bits;
+
+        list_for_each_entry(dev, &bus->devices, bus_list) {
+                id = (struct pci_device_id *) pci_match_id(ene_tune_tbl, dev);
+                if (id)
+                        break;
+        }
+
+        test_c9 = old_c9 = config_readb(socket, ENE_TEST_C9);
+        if (id) {
+                mask = (id->driver_data >> 8) & 0xFF;
+                bits = id->driver_data & 0xFF;
+
+                test_c9 = (test_c9 & ~mask) | bits;
+        }
+        else
+                /* default to clear TLTEnable bit, old behaviour */
+                test_c9 &= ~ENE_TEST_C9_TLTENABLE;
+
+        printk(KERN_INFO "yenta EnE: chaning testregister 0xC9, %02x -> %02x\n", old_c9, test_c9);
+        config_writeb(socket, ENE_TEST_C9, test_c9);
+}
+
+
+static int ene_override(struct yenta_socket *socket)
+{
+        /* install tune_bridge() function */
+        socket->socket.tune_bridge = ene_tune_bridge;
+
+        return ti1250_override(socket);
+}
+
 #endif /* _LINUX_TI113X_H */