Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 124 insertions, 0 deletions

diff --git a/drivers/pcmcia/sa1100_jornada720.c b/drivers/pcmcia/sa1100_jornada720.c
new file mode 100644
index 000000000000..0a387106acb0
--- /dev/null
+++ b/drivers/pcmcia/sa1100_jornada720.c
@@ -0,0 +1,124 @@
+/*
+ * drivers/pcmcia/sa1100_jornada720.c
+ *
+ * Jornada720 PCMCIA specific routines
+ *
+ */
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/device.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+
+#include <asm/hardware.h>
+#include <asm/hardware/sa1111.h>
+#include <asm/mach-types.h>
+
+#include "sa1111_generic.h"
+
+#define SOCKET0_POWER   GPIO_GPIO0
+#define SOCKET0_3V      GPIO_GPIO2
+#define SOCKET1_POWER   (GPIO_GPIO1 | GPIO_GPIO3)
+#warning *** Does SOCKET1_3V actually do anything?
+#define SOCKET1_3V      GPIO_GPIO3
+
+static int jornada720_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
+{
+  /*
+   * What is all this crap for?
+   */
+  GRER |= 0x00000002;
+  /* Set GPIO_A<3:1> to be outputs for PCMCIA/CF power controller: */
+  PA_DDR = 0;
+  PA_DWR = 0;
+  PA_SDR = 0;
+  PA_SSR = 0;
+
+  PB_DDR = 0;
+  PB_DWR = 0x01;
+  PB_SDR = 0;
+  PB_SSR = 0;
+
+  PC_DDR = 0x88;
+  PC_DWR = 0x20;
+  PC_SDR = 0;
+  PC_SSR = 0;
+
+  return sa1111_pcmcia_hw_init(skt);
+}
+
+static int
+jornada720_pcmcia_configure_socket(struct soc_pcmcia_socket *skt, const socket_state_t *state)
+{
+  unsigned int pa_dwr_mask, pa_dwr_set;
+  int ret;
+
+printk("%s(): config socket %d vcc %d vpp %d\n", __FUNCTION__,
+        skt->nr, state->Vcc, state->Vpp);
+
+  switch (skt->nr) {
+  case 0:
+    pa_dwr_mask = SOCKET0_POWER | SOCKET0_3V;
+
+    switch (state->Vcc) {
+    default:
+    case 0:     pa_dwr_set = 0;                                 break;
+    case 33:    pa_dwr_set = SOCKET0_POWER | SOCKET0_3V;        break;
+    case 50:    pa_dwr_set = SOCKET0_POWER;                     break;
+    }
+    break;
+
+  case 1:
+    pa_dwr_mask = SOCKET1_POWER;
+
+    switch (state->Vcc) {
+    default:
+    case 0:     pa_dwr_set = 0;                                 break;
+    case 33:    pa_dwr_set = SOCKET1_POWER;                     break;
+    case 50:    pa_dwr_set = SOCKET1_POWER;                     break;
+    }
+    break;
+
+  default:
+    return -1;
+  }
+
+  if (state->Vpp != state->Vcc && state->Vpp != 0) {
+    printk(KERN_ERR "%s(): slot cannot support VPP %u\n",
+           __FUNCTION__, state->Vpp);
+    return -1;
+  }
+
+  ret = sa1111_pcmcia_configure_socket(skt, state);
+  if (ret == 0) {
+    unsigned long flags;
+
+    local_irq_save(flags);
+    PA_DWR = (PA_DWR & ~pa_dwr_mask) | pa_dwr_set;
+    local_irq_restore(flags);
+  }
+
+  return ret;
+}
+
+static struct pcmcia_low_level jornada720_pcmcia_ops = {
+  .owner                = THIS_MODULE,
+  .hw_init              = jornada720_pcmcia_hw_init,
+  .hw_shutdown          = sa1111_pcmcia_hw_shutdown,
+  .socket_state         = sa1111_pcmcia_socket_state,
+  .configure_socket     = jornada720_pcmcia_configure_socket,
+
+  .socket_init          = sa1111_pcmcia_socket_init,
+  .socket_suspend       = sa1111_pcmcia_socket_suspend,
+};
+
+int __init pcmcia_jornada720_init(struct device *dev)
+{
+        int ret = -ENODEV;
+
+        if (machine_is_jornada720())
+                ret = sa11xx_drv_pcmcia_probe(dev, &jornada720_pcmcia_ops, 0, 2);
+
+        return ret;
+}