pcmcia: do not autoadd root PCI bus resources

On the PCI root bus on the x86 architecture, the risk of hitting
some strange system devices is too high: If a driver isn't loaded,
the resources are not claimed; even if a driver is loaded, it
may not request all resources or even the wrong one. We can neither
trust the rest of the kernel nor ACPI/PNP and CRS parsing to get it
right.

Therefore, explicitly spell out what safeguards we provide, and add
a safeguard to only use resources which are set up exclusively for
the secondary PCI bus (non-subtractive mode): the risk of hitting
system devices is quite low, as they usually aren't connected to
the secondary PCI bus.

CC: Jesse Barnes <jbarnes@virtuousgeek.org>
CC: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>

1 files changed, 29 insertions, 6 deletions

diff --git a/drivers/pcmcia/rsrc_nonstatic.c b/drivers/pcmcia/rsrc_nonstatic.c
index ba5256debde2..dcd1a4ad3d63 100644
--- a/drivers/pcmcia/rsrc_nonstatic.c
+++ b/drivers/pcmcia/rsrc_nonstatic.c
@@ -935,23 +935,42 @@ static int nonstatic_autoadd_resources(struct pcmcia_socket *s)
                 return -ENODEV;
 
 #if defined(CONFIG_X86)
-        /* If this is the root bus, the risk of hitting
-         * some strange system devices which aren't protected
-         * by either ACPI resource tables or properly requested
-         * resources is too big. Therefore, don't do auto-adding
-         * of resources at the moment.
+        /* If this is the root bus, the risk of hitting some strange
+         * system devices is too high: If a driver isn't loaded, the
+         * resources are not claimed; even if a driver is loaded, it
+         * may not request all resources or even the wrong one. We
+         * can neither trust the rest of the kernel nor ACPI/PNP and
+         * CRS parsing to get it right. Therefore, use several
+         * safeguards:
+         *
+         * - Do not auto-add resources if the CardBus bridge is on
+         *   the PCI root bus
+         *
+         * - Avoid any I/O ports < 0x100.
+         *
+         * - On PCI-PCI bridges, only use resources which are set up
+         *   exclusively for the secondary PCI bus: the risk of hitting
+         *   system devices is quite low, as they usually aren't
+         *   connected to the secondary PCI bus.
          */
         if (s->cb_dev->bus->number == 0)
                 return -EINVAL;
-#endif
 
+        for (i = 0; i < PCI_BRIDGE_RESOURCE_NUM; i++) {
+                res = s->cb_dev->bus->resource[i];
+#else
         pci_bus_for_each_resource(s->cb_dev->bus, res, i) {
+#endif
                 if (!res)
                         continue;
 
                 if (res->flags & IORESOURCE_IO) {
+                        /* safeguard against the root resource, where the
+                         * risk of hitting any other device would be too
+                         * high */
                         if (res == &ioport_resource)
                                 continue;
+
                         dev_printk(KERN_INFO, &s->cb_dev->dev,
                                    "pcmcia: parent PCI bridge window: %pR\n",
                                    res);
@@ -961,8 +980,12 @@ static int nonstatic_autoadd_resources(struct pcmcia_socket *s)
                 }
 
                 if (res->flags & IORESOURCE_MEM) {
+                        /* safeguard against the root resource, where the
+                         * risk of hitting any other device would be too
+                         * high */
                         if (res == &iomem_resource)
                                 continue;
+
                         dev_printk(KERN_INFO, &s->cb_dev->dev,
                                    "pcmcia: parent PCI bridge window: %pR\n",
                                    res);