diff options
author | Linus Torvalds <torvalds@ppc970.osdl.org> | 2005-04-16 18:20:36 -0400 |
---|---|---|
committer | Linus Torvalds <torvalds@ppc970.osdl.org> | 2005-04-16 18:20:36 -0400 |
commit | 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 (patch) | |
tree | 0bba044c4ce775e45a88a51686b5d9f90697ea9d /drivers/pcmcia/pxa2xx_sharpsl.c |
Linux-2.6.12-rc2v2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
Diffstat (limited to 'drivers/pcmcia/pxa2xx_sharpsl.c')
-rw-r--r-- | drivers/pcmcia/pxa2xx_sharpsl.c | 264 |
1 files changed, 264 insertions, 0 deletions
diff --git a/drivers/pcmcia/pxa2xx_sharpsl.c b/drivers/pcmcia/pxa2xx_sharpsl.c new file mode 100644 index 000000000000..42efe218867a --- /dev/null +++ b/drivers/pcmcia/pxa2xx_sharpsl.c | |||
@@ -0,0 +1,264 @@ | |||
1 | /* | ||
2 | * Sharp SL-C7xx Series PCMCIA routines | ||
3 | * | ||
4 | * Copyright (c) 2004-2005 Richard Purdie | ||
5 | * | ||
6 | * Based on Sharp's 2.4 kernel patches and pxa2xx_mainstone.c | ||
7 | * | ||
8 | * This program is free software; you can redistribute it and/or modify | ||
9 | * it under the terms of the GNU General Public License version 2 as | ||
10 | * published by the Free Software Foundation. | ||
11 | * | ||
12 | */ | ||
13 | |||
14 | #include <linux/module.h> | ||
15 | #include <linux/init.h> | ||
16 | #include <linux/kernel.h> | ||
17 | #include <linux/errno.h> | ||
18 | #include <linux/interrupt.h> | ||
19 | #include <linux/device.h> | ||
20 | |||
21 | #include <asm/hardware.h> | ||
22 | #include <asm/irq.h> | ||
23 | |||
24 | #include <asm/hardware/scoop.h> | ||
25 | #include <asm/arch/corgi.h> | ||
26 | #include <asm/arch/pxa-regs.h> | ||
27 | |||
28 | #include "soc_common.h" | ||
29 | |||
30 | #define NO_KEEP_VS 0x0001 | ||
31 | |||
32 | static unsigned char keep_vs; | ||
33 | static unsigned char keep_rd; | ||
34 | |||
35 | static struct pcmcia_irqs irqs[] = { | ||
36 | { 0, CORGI_IRQ_GPIO_CF_CD, "PCMCIA0 CD"}, | ||
37 | }; | ||
38 | |||
39 | static void sharpsl_pcmcia_init_reset(void) | ||
40 | { | ||
41 | reset_scoop(&corgiscoop_device.dev); | ||
42 | keep_vs = NO_KEEP_VS; | ||
43 | keep_rd = 0; | ||
44 | } | ||
45 | |||
46 | static int sharpsl_pcmcia_hw_init(struct soc_pcmcia_socket *skt) | ||
47 | { | ||
48 | int ret; | ||
49 | |||
50 | /* | ||
51 | * Setup default state of GPIO outputs | ||
52 | * before we enable them as outputs. | ||
53 | */ | ||
54 | GPSR(GPIO48_nPOE) = | ||
55 | GPIO_bit(GPIO48_nPOE) | | ||
56 | GPIO_bit(GPIO49_nPWE) | | ||
57 | GPIO_bit(GPIO50_nPIOR) | | ||
58 | GPIO_bit(GPIO51_nPIOW) | | ||
59 | GPIO_bit(GPIO52_nPCE_1) | | ||
60 | GPIO_bit(GPIO53_nPCE_2); | ||
61 | |||
62 | pxa_gpio_mode(GPIO48_nPOE_MD); | ||
63 | pxa_gpio_mode(GPIO49_nPWE_MD); | ||
64 | pxa_gpio_mode(GPIO50_nPIOR_MD); | ||
65 | pxa_gpio_mode(GPIO51_nPIOW_MD); | ||
66 | pxa_gpio_mode(GPIO52_nPCE_1_MD); | ||
67 | pxa_gpio_mode(GPIO53_nPCE_2_MD); | ||
68 | pxa_gpio_mode(GPIO54_pSKTSEL_MD); | ||
69 | pxa_gpio_mode(GPIO55_nPREG_MD); | ||
70 | pxa_gpio_mode(GPIO56_nPWAIT_MD); | ||
71 | pxa_gpio_mode(GPIO57_nIOIS16_MD); | ||
72 | |||
73 | /* Register interrupts */ | ||
74 | ret = soc_pcmcia_request_irqs(skt, irqs, ARRAY_SIZE(irqs)); | ||
75 | |||
76 | if (ret) { | ||
77 | printk(KERN_ERR "Request for Compact Flash IRQ failed\n"); | ||
78 | return ret; | ||
79 | } | ||
80 | |||
81 | /* Enable interrupt */ | ||
82 | write_scoop_reg(&corgiscoop_device.dev, SCOOP_IMR, 0x00C0); | ||
83 | write_scoop_reg(&corgiscoop_device.dev, SCOOP_MCR, 0x0101); | ||
84 | keep_vs = NO_KEEP_VS; | ||
85 | |||
86 | skt->irq = CORGI_IRQ_GPIO_CF_IRQ; | ||
87 | |||
88 | return 0; | ||
89 | } | ||
90 | |||
91 | static void sharpsl_pcmcia_hw_shutdown(struct soc_pcmcia_socket *skt) | ||
92 | { | ||
93 | soc_pcmcia_free_irqs(skt, irqs, ARRAY_SIZE(irqs)); | ||
94 | |||
95 | /* CF_BUS_OFF */ | ||
96 | sharpsl_pcmcia_init_reset(); | ||
97 | } | ||
98 | |||
99 | |||
100 | static void sharpsl_pcmcia_socket_state(struct soc_pcmcia_socket *skt, | ||
101 | struct pcmcia_state *state) | ||
102 | { | ||
103 | unsigned short cpr, csr; | ||
104 | |||
105 | cpr = read_scoop_reg(&corgiscoop_device.dev, SCOOP_CPR); | ||
106 | |||
107 | write_scoop_reg(&corgiscoop_device.dev, SCOOP_IRM, 0x00FF); | ||
108 | write_scoop_reg(&corgiscoop_device.dev, SCOOP_ISR, 0x0000); | ||
109 | write_scoop_reg(&corgiscoop_device.dev, SCOOP_IRM, 0x0000); | ||
110 | csr = read_scoop_reg(&corgiscoop_device.dev, SCOOP_CSR); | ||
111 | if (csr & 0x0004) { | ||
112 | /* card eject */ | ||
113 | write_scoop_reg(&corgiscoop_device.dev, SCOOP_CDR, 0x0000); | ||
114 | keep_vs = NO_KEEP_VS; | ||
115 | } | ||
116 | else if (!(keep_vs & NO_KEEP_VS)) { | ||
117 | /* keep vs1,vs2 */ | ||
118 | write_scoop_reg(&corgiscoop_device.dev, SCOOP_CDR, 0x0000); | ||
119 | csr |= keep_vs; | ||
120 | } | ||
121 | else if (cpr & 0x0003) { | ||
122 | /* power on */ | ||
123 | write_scoop_reg(&corgiscoop_device.dev, SCOOP_CDR, 0x0000); | ||
124 | keep_vs = (csr & 0x00C0); | ||
125 | } | ||
126 | else { | ||
127 | /* card detect */ | ||
128 | write_scoop_reg(&corgiscoop_device.dev, SCOOP_CDR, 0x0002); | ||
129 | } | ||
130 | |||
131 | state->detect = (csr & 0x0004) ? 0 : 1; | ||
132 | state->ready = (csr & 0x0002) ? 1 : 0; | ||
133 | state->bvd1 = (csr & 0x0010) ? 1 : 0; | ||
134 | state->bvd2 = (csr & 0x0020) ? 1 : 0; | ||
135 | state->wrprot = (csr & 0x0008) ? 1 : 0; | ||
136 | state->vs_3v = (csr & 0x0040) ? 0 : 1; | ||
137 | state->vs_Xv = (csr & 0x0080) ? 0 : 1; | ||
138 | |||
139 | if ((cpr & 0x0080) && ((cpr & 0x8040) != 0x8040)) { | ||
140 | printk(KERN_ERR "sharpsl_pcmcia_socket_state(): CPR=%04X, Low voltage!\n", cpr); | ||
141 | } | ||
142 | |||
143 | } | ||
144 | |||
145 | |||
146 | static int sharpsl_pcmcia_configure_socket(struct soc_pcmcia_socket *skt, | ||
147 | const socket_state_t *state) | ||
148 | { | ||
149 | unsigned long flags; | ||
150 | |||
151 | unsigned short cpr, ncpr, ccr, nccr, mcr, nmcr, imr, nimr; | ||
152 | |||
153 | switch (state->Vcc) { | ||
154 | case 0: break; | ||
155 | case 33: break; | ||
156 | case 50: break; | ||
157 | default: | ||
158 | printk(KERN_ERR "sharpsl_pcmcia_configure_socket(): bad Vcc %u\n", state->Vcc); | ||
159 | return -1; | ||
160 | } | ||
161 | |||
162 | if ((state->Vpp!=state->Vcc) && (state->Vpp!=0)) { | ||
163 | printk(KERN_ERR "CF slot cannot support Vpp %u\n", state->Vpp); | ||
164 | return -1; | ||
165 | } | ||
166 | |||
167 | local_irq_save(flags); | ||
168 | |||
169 | nmcr = (mcr = read_scoop_reg(&corgiscoop_device.dev, SCOOP_MCR)) & ~0x0010; | ||
170 | ncpr = (cpr = read_scoop_reg(&corgiscoop_device.dev, SCOOP_CPR)) & ~0x0083; | ||
171 | nccr = (ccr = read_scoop_reg(&corgiscoop_device.dev, SCOOP_CCR)) & ~0x0080; | ||
172 | nimr = (imr = read_scoop_reg(&corgiscoop_device.dev, SCOOP_IMR)) & ~0x003E; | ||
173 | |||
174 | ncpr |= (state->Vcc == 33) ? 0x0001 : | ||
175 | (state->Vcc == 50) ? 0x0002 : 0; | ||
176 | nmcr |= (state->flags&SS_IOCARD) ? 0x0010 : 0; | ||
177 | ncpr |= (state->flags&SS_OUTPUT_ENA) ? 0x0080 : 0; | ||
178 | nccr |= (state->flags&SS_RESET)? 0x0080: 0; | ||
179 | nimr |= ((skt->status&SS_DETECT) ? 0x0004 : 0)| | ||
180 | ((skt->status&SS_READY) ? 0x0002 : 0)| | ||
181 | ((skt->status&SS_BATDEAD)? 0x0010 : 0)| | ||
182 | ((skt->status&SS_BATWARN)? 0x0020 : 0)| | ||
183 | ((skt->status&SS_STSCHG) ? 0x0010 : 0)| | ||
184 | ((skt->status&SS_WRPROT) ? 0x0008 : 0); | ||
185 | |||
186 | if (!(ncpr & 0x0003)) { | ||
187 | keep_rd = 0; | ||
188 | } else if (!keep_rd) { | ||
189 | if (nccr & 0x0080) | ||
190 | keep_rd = 1; | ||
191 | else | ||
192 | nccr |= 0x0080; | ||
193 | } | ||
194 | |||
195 | if (mcr != nmcr) | ||
196 | write_scoop_reg(&corgiscoop_device.dev, SCOOP_MCR, nmcr); | ||
197 | if (cpr != ncpr) | ||
198 | write_scoop_reg(&corgiscoop_device.dev, SCOOP_CPR, ncpr); | ||
199 | if (ccr != nccr) | ||
200 | write_scoop_reg(&corgiscoop_device.dev, SCOOP_CCR, nccr); | ||
201 | if (imr != nimr) | ||
202 | write_scoop_reg(&corgiscoop_device.dev, SCOOP_IMR, nimr); | ||
203 | |||
204 | local_irq_restore(flags); | ||
205 | |||
206 | return 0; | ||
207 | } | ||
208 | |||
209 | static void sharpsl_pcmcia_socket_init(struct soc_pcmcia_socket *skt) | ||
210 | { | ||
211 | } | ||
212 | |||
213 | static void sharpsl_pcmcia_socket_suspend(struct soc_pcmcia_socket *skt) | ||
214 | { | ||
215 | } | ||
216 | |||
217 | static struct pcmcia_low_level sharpsl_pcmcia_ops = { | ||
218 | .owner = THIS_MODULE, | ||
219 | .hw_init = sharpsl_pcmcia_hw_init, | ||
220 | .hw_shutdown = sharpsl_pcmcia_hw_shutdown, | ||
221 | .socket_state = sharpsl_pcmcia_socket_state, | ||
222 | .configure_socket = sharpsl_pcmcia_configure_socket, | ||
223 | .socket_init = sharpsl_pcmcia_socket_init, | ||
224 | .socket_suspend = sharpsl_pcmcia_socket_suspend, | ||
225 | .first = 0, | ||
226 | .nr = 1, | ||
227 | }; | ||
228 | |||
229 | static struct platform_device *sharpsl_pcmcia_device; | ||
230 | |||
231 | static int __init sharpsl_pcmcia_init(void) | ||
232 | { | ||
233 | int ret; | ||
234 | |||
235 | sharpsl_pcmcia_device = kmalloc(sizeof(*sharpsl_pcmcia_device), GFP_KERNEL); | ||
236 | if (!sharpsl_pcmcia_device) | ||
237 | return -ENOMEM; | ||
238 | memset(sharpsl_pcmcia_device, 0, sizeof(*sharpsl_pcmcia_device)); | ||
239 | sharpsl_pcmcia_device->name = "pxa2xx-pcmcia"; | ||
240 | sharpsl_pcmcia_device->dev.platform_data = &sharpsl_pcmcia_ops; | ||
241 | |||
242 | ret = platform_device_register(sharpsl_pcmcia_device); | ||
243 | if (ret) | ||
244 | kfree(sharpsl_pcmcia_device); | ||
245 | |||
246 | return ret; | ||
247 | } | ||
248 | |||
249 | static void __exit sharpsl_pcmcia_exit(void) | ||
250 | { | ||
251 | /* | ||
252 | * This call is supposed to free our sharpsl_pcmcia_device. | ||
253 | * Unfortunately platform_device don't have a free method, and | ||
254 | * we can't assume it's free of any reference at this point so we | ||
255 | * can't free it either. | ||
256 | */ | ||
257 | platform_device_unregister(sharpsl_pcmcia_device); | ||
258 | } | ||
259 | |||
260 | module_init(sharpsl_pcmcia_init); | ||
261 | module_exit(sharpsl_pcmcia_exit); | ||
262 | |||
263 | MODULE_DESCRIPTION("Sharp SL Series PCMCIA Support"); | ||
264 | MODULE_LICENSE("GPL"); | ||