PCI: add D3 power state avoidance quirk

Libata has some hacks to deal with certain controllers going silly in D3
state. The right way to handle this is to keep a PCI device flag for
such devices. That can then be generalised for no ATA devices with power
problems.

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>

2 files changed, 17 insertions, 0 deletions

diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index c95f77d65718..0a3d856833fc 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -572,6 +572,10 @@ int pci_set_power_state(struct pci_dev *dev, pci_power_t state)
                 if (!ret)
                         pci_update_current_state(dev);
         }
+        /* This device is quirked not to be put into D3, so
+           don't put it in D3 */
+        if (state == PCI_D3hot && (dev->dev_flags & PCI_DEV_FLAGS_NO_D3))
+                return 0;
 
         error = pci_raw_set_power_state(dev, state);
 
diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index 12d489395fad..0fb365074288 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -923,6 +923,19 @@ static void __init quirk_ide_samemode(struct pci_dev *pdev)
 }
 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_10, quirk_ide_samemode);
 
+/*
+ * Some ATA devices break if put into D3
+ */
+
+static void __devinit quirk_no_ata_d3(struct pci_dev *pdev)
+{
+        /* Quirk the legacy ATA devices only. The AHCI ones are ok */
+        if ((pdev->class >> 8) == PCI_CLASS_STORAGE_IDE)
+                pdev->dev_flags |= PCI_DEV_FLAGS_NO_D3;
+}
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_SERVERWORKS, PCI_ANY_ID, quirk_no_ata_d3);
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_ATI, PCI_ANY_ID, quirk_no_ata_d3);
+
 /* This was originally an Alpha specific thing, but it really fits here.
  * The i82375 PCI/EISA bridge appears as non-classified. Fix that.
  */