Merge branch 'next-rebase' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci

* 'next-rebase' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci:
  PCI: Clean-up MPS debug output
  pci: Clamp pcie_set_readrq() when using "performance" settings
  PCI: enable MPS "performance" setting to properly handle bridge MPS
  PCI: Workaround for Intel MPS errata
  PCI: Add support for PASID capability
  PCI: Add implementation for PRI capability
  PCI: Export ATS functions to modules
  PCI: Move ATS implementation into own file
  PCI / PM: Remove unnecessary error variable from acpi_dev_run_wake()
  PCI hotplug: acpiphp: Prevent deadlock on PCI-to-PCI bridge remove
  PCI / PM: Extend PME polling to all PCI devices
  PCI quirk: mmc: Always check for lower base frequency quirk for Ricoh 1180:e823
  PCI: Make pci_setup_bridge() non-static for use by arch code
  x86: constify PCI raw ops structures
  PCI: Add quirk for known incorrect MPSS
  PCI: Add Solarflare vendor ID and SFC4000 device IDs

1 files changed, 97 insertions, 14 deletions

diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index b23856aaf6eb..7285145ac1c9 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -2745,20 +2745,6 @@ static void ricoh_mmc_fixup_r5c832(struct pci_dev *dev)
         /* disable must be done via function #0 */
         if (PCI_FUNC(dev->devfn))
                 return;
-
-        pci_read_config_byte(dev, 0xCB, &disable);
-
-        if (disable & 0x02)
-                return;
-
-        pci_read_config_byte(dev, 0xCA, &write_enable);
-        pci_write_config_byte(dev, 0xCA, 0x57);
-        pci_write_config_byte(dev, 0xCB, disable | 0x02);
-        pci_write_config_byte(dev, 0xCA, write_enable);
-
-        dev_notice(&dev->dev, "proprietary Ricoh MMC controller disabled (via firewire function)\n");
-        dev_notice(&dev->dev, "MMC cards are now supported by standard SDHCI controller\n");
-
         /*
          * RICOH 0xe823 SD/MMC card reader fails to recognize
          * certain types of SD/MMC cards. Lowering the SD base
@@ -2781,6 +2767,20 @@ static void ricoh_mmc_fixup_r5c832(struct pci_dev *dev)
 
                 dev_notice(&dev->dev, "MMC controller base frequency changed to 50Mhz.\n");
         }
+
+        pci_read_config_byte(dev, 0xCB, &disable);
+
+        if (disable & 0x02)
+                return;
+
+        pci_read_config_byte(dev, 0xCA, &write_enable);
+        pci_write_config_byte(dev, 0xCA, 0x57);
+        pci_write_config_byte(dev, 0xCB, disable | 0x02);
+        pci_write_config_byte(dev, 0xCA, write_enable);
+
+        dev_notice(&dev->dev, "proprietary Ricoh MMC controller disabled (via firewire function)\n");
+        dev_notice(&dev->dev, "MMC cards are now supported by standard SDHCI controller\n");
+
 }
 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_R5C832, ricoh_mmc_fixup_r5c832);
 DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_R5C832, ricoh_mmc_fixup_r5c832);
@@ -2822,6 +2822,89 @@ static void __devinit fixup_ti816x_class(struct pci_dev* dev)
 }
 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_TI, 0xb800, fixup_ti816x_class);
 
+/* Some PCIe devices do not work reliably with the claimed maximum
+ * payload size supported.
+ */
+static void __devinit fixup_mpss_256(struct pci_dev *dev)
+{
+        dev->pcie_mpss = 1; /* 256 bytes */
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SOLARFLARE,
+                         PCI_DEVICE_ID_SOLARFLARE_SFC4000A_0, fixup_mpss_256);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SOLARFLARE,
+                         PCI_DEVICE_ID_SOLARFLARE_SFC4000A_1, fixup_mpss_256);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SOLARFLARE,
+                         PCI_DEVICE_ID_SOLARFLARE_SFC4000B, fixup_mpss_256);
+
+/* Intel 5000 and 5100 Memory controllers have an errata with read completion
+ * coalescing (which is enabled by default on some BIOSes) and MPS of 256B.
+ * Since there is no way of knowing what the PCIE MPS on each fabric will be
+ * until all of the devices are discovered and buses walked, read completion
+ * coalescing must be disabled.  Unfortunately, it cannot be re-enabled because
+ * it is possible to hotplug a device with MPS of 256B.
+ */
+static void __devinit quirk_intel_mc_errata(struct pci_dev *dev)
+{
+        int err;
+        u16 rcc;
+
+        if (pcie_bus_config == PCIE_BUS_TUNE_OFF)
+                return;
+
+        /* Intel errata specifies bits to change but does not say what they are.
+         * Keeping them magical until such time as the registers and values can
+         * be explained.
+         */
+        err = pci_read_config_word(dev, 0x48, &rcc);
+        if (err) {
+                dev_err(&dev->dev, "Error attempting to read the read "
+                        "completion coalescing register.\n");
+                return;
+        }
+
+        if (!(rcc & (1 << 10)))
+                return;
+
+        rcc &= ~(1 << 10);
+
+        err = pci_write_config_word(dev, 0x48, rcc);
+        if (err) {
+                dev_err(&dev->dev, "Error attempting to write the read "
+                        "completion coalescing register.\n");
+                return;
+        }
+
+        pr_info_once("Read completion coalescing disabled due to hardware "
+                     "errata relating to 256B MPS.\n");
+}
+/* Intel 5000 series memory controllers and ports 2-7 */
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x25c0, quirk_intel_mc_errata);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x25d0, quirk_intel_mc_errata);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x25d4, quirk_intel_mc_errata);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x25d8, quirk_intel_mc_errata);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x25e2, quirk_intel_mc_errata);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x25e3, quirk_intel_mc_errata);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x25e4, quirk_intel_mc_errata);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x25e5, quirk_intel_mc_errata);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x25e6, quirk_intel_mc_errata);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x25e7, quirk_intel_mc_errata);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x25f7, quirk_intel_mc_errata);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x25f8, quirk_intel_mc_errata);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x25f9, quirk_intel_mc_errata);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x25fa, quirk_intel_mc_errata);
+/* Intel 5100 series memory controllers and ports 2-7 */
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x65c0, quirk_intel_mc_errata);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x65e2, quirk_intel_mc_errata);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x65e3, quirk_intel_mc_errata);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x65e4, quirk_intel_mc_errata);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x65e5, quirk_intel_mc_errata);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x65e6, quirk_intel_mc_errata);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x65e7, quirk_intel_mc_errata);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x65f7, quirk_intel_mc_errata);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x65f8, quirk_intel_mc_errata);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x65f9, quirk_intel_mc_errata);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x65fa, quirk_intel_mc_errata);
+
 static void pci_do_fixups(struct pci_dev *dev, struct pci_fixup *f,
                           struct pci_fixup *end)
 {