[PATCH] PCI Express Hotplug: clear sticky power-fault bit

Per the PCI Express spec, the power-fault-detected bit in the
slot status register can be set anytime hardware detects a power
fault, regardless of whether the slot has a device populated in
it or not. This bit is sticky and must be explicitly cleared.
This patch is needed to allow hot-add after such a power fault
has been detected.

Signed-off-by: Rajesh Shah <rajesh.shah@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

1 files changed, 2 insertions, 13 deletions

diff --git a/drivers/pci/hotplug/pciehp_ctrl.c b/drivers/pci/hotplug/pciehp_ctrl.c
index 5e582eca21d8..83c4b865718a 100644
--- a/drivers/pci/hotplug/pciehp_ctrl.c
+++ b/drivers/pci/hotplug/pciehp_ctrl.c
@@ -207,7 +207,6 @@ u8 pciehp_handle_power_fault(u8 hp_slot, void *inst_id)
                  * power fault Cleared
                  */
                 info("Power fault cleared on Slot(%d)\n", ctrl->first_slot + hp_slot);
-                p_slot->status = 0x00;
                 taskInfo->event_type = INT_POWER_FAULT_CLEAR;
         } else {
                 /*
@@ -215,8 +214,6 @@ u8 pciehp_handle_power_fault(u8 hp_slot, void *inst_id)
                  */
                 info("Power fault on Slot(%d)\n", ctrl->first_slot + hp_slot);
                 taskInfo->event_type = INT_POWER_FAULT;
-                /* set power fault status for this board */
-                p_slot->status = 0xFF;
                 info("power fault bit %x set\n", hp_slot);
         }
         if (rc)
@@ -317,13 +314,10 @@ static int board_added(struct slot *p_slot)
                 return rc;
         }
 
-        dbg("%s: slot status = %x\n", __FUNCTION__, p_slot->status);
-
         /* Check for a power fault */
-        if (p_slot->status == 0xFF) {
-                /* power fault occurred, but it was benign */
+        if (p_slot->hpc_ops->query_power_fault(p_slot)) {
+                dbg("%s: power fault detected\n", __FUNCTION__);
                 rc = POWER_FAILURE;
-                p_slot->status = 0;
                 goto err_exit;
         }
 
@@ -334,8 +328,6 @@ static int board_added(struct slot *p_slot)
                 goto err_exit;
         }
 
-        p_slot->status = 0;
-
         /*
          * Some PCI Express root ports require fixup after hot-plug operation.
          */
@@ -382,9 +374,6 @@ static int remove_board(struct slot *p_slot)
 
         dbg("In %s, hp_slot = %d\n", __FUNCTION__, hp_slot);
 
-        /* Change status to shutdown */
-        p_slot->status = 0x01;
-
         /* Wait for exclusive access to hardware */
         down(&ctrl->crit_sect);