[PATCH] PCI Hotplug: CPCI update

[PATCH] CPCI: update

I have finally done some work to update the CompactPCI hotplug driver to
fix some of the outstanding issues in 2.6:
- Added adapter and latch status ops so that those files will get created
  by the current PCI hotplug core.  This used to not be required, but
  seems to be now after some of the sysfs rework in the core.
- Replaced slot list spinlock with a r/w semaphore to avoid any potential
  issues with sleeping.  This quiets all of the runtime warnings.
- Reworked interrupt driven hot extraction handling to remove need for a
  polling operator for ENUM# status.  There are a lot of boards that only
  have an interrupt driven by ENUM#, so this lowers the bar to entry.
- Replaced pci_visit_dev usage with better use of the PCI core functions.
  The new code is functionally equivalent to the previous code, but the
  use of pci_enable_device on insert needs to be investigated further, as
  I need to do some more testing to see if it is still necessary.

Signed-off-by: Scott Murray <scottm@somanetworks.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

1 files changed, 25 insertions, 327 deletions

diff --git a/drivers/pci/hotplug/cpci_hotplug_pci.c b/drivers/pci/hotplug/cpci_hotplug_pci.c
index 2e969616f298..69eb4fc54f2f 100644
--- a/drivers/pci/hotplug/cpci_hotplug_pci.c
+++ b/drivers/pci/hotplug/cpci_hotplug_pci.c
@@ -32,11 +32,7 @@
 #include "pci_hotplug.h"
 #include "cpci_hotplug.h"
 
-#if !defined(MODULE)
 #define MY_NAME "cpci_hotplug"
-#else
-#define MY_NAME THIS_MODULE->name
-#endif
 
 extern int cpci_debug;
 
@@ -127,38 +123,6 @@ u16 cpci_get_hs_csr(struct slot* slot)
         return hs_csr;
 }
 
-#if 0
-u16 cpci_set_hs_csr(struct slot* slot, u16 hs_csr)
-{
-        int hs_cap;
-        u16 new_hs_csr;
-
-        hs_cap = pci_bus_find_capability(slot->bus,
-                                         slot->devfn,
-                                         PCI_CAP_ID_CHSWP);
-        if(!hs_cap) {
-                return 0xFFFF;
-        }
-
-        /* Write out the new value */
-        if(pci_bus_write_config_word(slot->bus,
-                                      slot->devfn,
-                                      hs_cap + 2,
-                                      hs_csr)) {
-                return 0xFFFF;
-        }
-
-        /* Read back what we just wrote out */
-        if(pci_bus_read_config_word(slot->bus,
-                                     slot->devfn,
-                                     hs_cap + 2,
-                                     &new_hs_csr)) {
-                return 0xFFFF;
-        }
-        return new_hs_csr;
-}
-#endif
-
 int cpci_check_and_clear_ins(struct slot* slot)
 {
         int hs_cap;
@@ -261,7 +225,6 @@ int cpci_led_on(struct slot* slot)
                 return -ENODEV;
         }
         if((hs_csr & HS_CSR_LOO) != HS_CSR_LOO) {
-                /* Set LOO */
                 hs_csr |= HS_CSR_LOO;
                 if(pci_bus_write_config_word(slot->bus,
                                               slot->devfn,
@@ -293,7 +256,6 @@ int cpci_led_off(struct slot* slot)
                 return -ENODEV;
         }
         if(hs_csr & HS_CSR_LOO) {
-                /* Clear LOO */
                 hs_csr &= ~HS_CSR_LOO;
                 if(pci_bus_write_config_word(slot->bus,
                                               slot->devfn,
@@ -312,257 +274,23 @@ int cpci_led_off(struct slot* slot)
  * Device configuration functions
  */
 
-static int cpci_configure_dev(struct pci_bus *bus, struct pci_dev *dev)
-{
-        u8 irq_pin;
-        int r;
-
-        dbg("%s - enter", __FUNCTION__);
-
-        /* NOTE: device already setup from prior scan */
-
-        /* FIXME: How would we know if we need to enable the expansion ROM? */
-        pci_write_config_word(dev, PCI_ROM_ADDRESS, 0x00L);
-
-        /* Assign resources */
-        dbg("assigning resources for %02x:%02x.%x",
-            dev->bus->number, PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn));
-        for (r = 0; r < 6; r++) {
-                struct resource *res = dev->resource + r;
-                if(res->flags)
-                        pci_assign_resource(dev, r);
-        }
-        dbg("finished assigning resources for %02x:%02x.%x",
-            dev->bus->number, PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn));
-
-        /* Does this function have an interrupt at all? */
-        dbg("checking for function interrupt");
-        pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &irq_pin);
-        if(irq_pin) {
-                dbg("function uses interrupt pin %d", irq_pin);
-        }
-
-        /*
-         * Need to explicitly set irq field to 0 so that it'll get assigned
-         * by the pcibios platform dependent code called by pci_enable_device.
-         */
-        dev->irq = 0;
-
-        dbg("enabling device");
-        pci_enable_device(dev); /* XXX check return */
-        dbg("now dev->irq = %d", dev->irq);
-        if(irq_pin && dev->irq) {
-                pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq);
-        }
-
-        /* Can't use pci_insert_device at the moment, do it manually for now */
-        pci_proc_attach_device(dev);
-        dbg("notifying drivers");
-        //pci_announce_device_to_drivers(dev);
-        dbg("%s - exit", __FUNCTION__);
-        return 0;
-}
-
-static int cpci_configure_bridge(struct pci_bus* bus, struct pci_dev* dev)
+static void cpci_enable_device(struct pci_dev *dev)
 {
-        int rc;
-        struct pci_bus* child;
-        struct resource* r;
-        u8 max, n;
-        u16 command;
-
-        dbg("%s - enter", __FUNCTION__);
+        struct pci_bus *bus;
 
-        /* Do basic bridge initialization */
-        rc = pci_write_config_byte(dev, PCI_LATENCY_TIMER, 0x40);
-        if(rc) {
-                printk(KERN_ERR "%s - write of PCI_LATENCY_TIMER failed\n", __FUNCTION__);
-        }
-        rc = pci_write_config_byte(dev, PCI_SEC_LATENCY_TIMER, 0x40);
-        if(rc) {
-                printk(KERN_ERR "%s - write of PCI_SEC_LATENCY_TIMER failed\n", __FUNCTION__);
-        }
-        rc = pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, L1_CACHE_BYTES / 4);
-        if(rc) {
-                printk(KERN_ERR "%s - write of PCI_CACHE_LINE_SIZE failed\n", __FUNCTION__);
-        }
-
-        /*
-         * Set parent bridge's subordinate field so that configuration space
-         * access will work in pci_scan_bridge and friends.
-         */
-        max = pci_max_busnr();
-        bus->subordinate = max + 1;
-        pci_write_config_byte(bus->self, PCI_SUBORDINATE_BUS, max + 1);
-
-        /* Scan behind bridge */
-        n = pci_scan_bridge(bus, dev, max, 2);
-        child = pci_find_bus(0, max + 1);
-        if (!child)
-                return -ENODEV;
-        pci_proc_attach_bus(child);
-
-        /*
-         * Update parent bridge's subordinate field if there were more bridges
-         * behind the bridge that was scanned.
-         */
-        if(n > max) {
-                bus->subordinate = n;
-                pci_write_config_byte(bus->self, PCI_SUBORDINATE_BUS, n);
-        }
-
-        /*
-         * Update the bridge resources of the bridge to accommodate devices
-         * behind it.
-         */
-        pci_bus_size_bridges(child);
-        pci_bus_assign_resources(child);
-
-        /* Enable resource mapping via command register */
-        command = PCI_COMMAND_MASTER | PCI_COMMAND_INVALIDATE | PCI_COMMAND_PARITY | PCI_COMMAND_SERR;
-        r = child->resource[0];
-        if(r && r->start) {
-                command |= PCI_COMMAND_IO;
-        }
-        r = child->resource[1];
-        if(r && r->start) {
-                command |= PCI_COMMAND_MEMORY;
-        }
-        r = child->resource[2];
-        if(r && r->start) {
-                command |= PCI_COMMAND_MEMORY;
-        }
-        rc = pci_write_config_word(dev, PCI_COMMAND, command);
-        if(rc) {
-                err("Error setting command register");
-                return rc;
-        }
-
-        /* Set bridge control register */
-        command = PCI_BRIDGE_CTL_PARITY | PCI_BRIDGE_CTL_SERR | PCI_BRIDGE_CTL_NO_ISA;
-        rc = pci_write_config_word(dev, PCI_BRIDGE_CONTROL, command);
-        if(rc) {
-                err("Error setting bridge control register");
-                return rc;
-        }
-        dbg("%s - exit", __FUNCTION__);
-        return 0;
-}
-
-static int configure_visit_pci_dev(struct pci_dev_wrapped *wrapped_dev,
-                                   struct pci_bus_wrapped *wrapped_bus)
-{
-        int rc;
-        struct pci_dev *dev = wrapped_dev->dev;
-        struct pci_bus *bus = wrapped_bus->bus;
-        struct slot* slot;
-
-        dbg("%s - enter", __FUNCTION__);
-
-        /*
-         * We need to fix up the hotplug representation with the Linux
-         * representation.
-         */
-        if(wrapped_dev->data) {
-                slot = (struct slot*) wrapped_dev->data;
-                slot->dev = dev;
-        }
-
-        /* If it's a bridge, scan behind it for devices */
+        pci_enable_device(dev);
         if(dev->hdr_type == PCI_HEADER_TYPE_BRIDGE) {
-                rc = cpci_configure_bridge(bus, dev);
-                if(rc)
-                        return rc;
-        }
-
-        /* Actually configure device */
-        if(dev) {
-                rc = cpci_configure_dev(bus, dev);
-                if(rc)
-                        return rc;
-        }
-        dbg("%s - exit", __FUNCTION__);
-        return 0;
-}
-
-static int unconfigure_visit_pci_dev_phase2(struct pci_dev_wrapped *wrapped_dev,
-                                            struct pci_bus_wrapped *wrapped_bus)
-{
-        struct pci_dev *dev = wrapped_dev->dev;
-        struct slot* slot;
-
-        dbg("%s - enter", __FUNCTION__);
-        if(!dev)
-                return -ENODEV;
-
-        /* Remove the Linux representation */
-        if(pci_remove_device_safe(dev)) {
-                err("Could not remove device\n");
-                return -1;
-        }
-
-        /*
-         * Now remove the hotplug representation.
-         */
-        if(wrapped_dev->data) {
-                slot = (struct slot*) wrapped_dev->data;
-                slot->dev = NULL;
-        } else {
-                dbg("No hotplug representation for %02x:%02x.%x",
-                    dev->bus->number, PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn));
-        }
-        dbg("%s - exit", __FUNCTION__);
-        return 0;
-}
-
-static int unconfigure_visit_pci_bus_phase2(struct pci_bus_wrapped *wrapped_bus,
-                                            struct pci_dev_wrapped *wrapped_dev)
-{
-        struct pci_bus *bus = wrapped_bus->bus;
-        struct pci_bus *parent = bus->self->bus;
-
-        dbg("%s - enter", __FUNCTION__);
-
-        /* The cleanup code for proc entries regarding buses should be in the kernel... */
-        if(bus->procdir)
-                dbg("detach_pci_bus %s", bus->procdir->name);
-        pci_proc_detach_bus(bus);
-
-        /* The cleanup code should live in the kernel... */
-        bus->self->subordinate = NULL;
-
-        /* unlink from parent bus */
-        list_del(&bus->node);
-
-        /* Now, remove */
-        if(bus)
-                kfree(bus);
-
-        /* Update parent's subordinate field */
-        if(parent) {
-                u8 n = pci_bus_max_busnr(parent);
-                if(n < parent->subordinate) {
-                        parent->subordinate = n;
-                        pci_write_config_byte(parent->self, PCI_SUBORDINATE_BUS, n);
+                bus = dev->subordinate;
+                list_for_each_entry(dev, &bus->devices, bus_list) {
+                        cpci_enable_device(dev);
                 }
         }
-        dbg("%s - exit", __FUNCTION__);
-        return 0;
 }
 
-static struct pci_visit configure_functions = {
-        .visit_pci_dev = configure_visit_pci_dev,
-};
-
-static struct pci_visit unconfigure_functions_phase2 = {
-        .post_visit_pci_bus = unconfigure_visit_pci_bus_phase2,
-        .post_visit_pci_dev = unconfigure_visit_pci_dev_phase2
-};
-
-
 int cpci_configure_slot(struct slot* slot)
 {
-        int rc = 0;
+        unsigned char busnr;
+        struct pci_bus *child;
 
         dbg("%s - enter", __FUNCTION__);
 
@@ -588,74 +316,44 @@ int cpci_configure_slot(struct slot* slot)
                 slot->dev = pci_find_slot(slot->bus->number, slot->devfn);
                 if(slot->dev == NULL) {
                         err("Could not find PCI device for slot %02x", slot->number);
-                        return 0;
+                        return 1;
                 }
         }
-        dbg("slot->dev = %p", slot->dev);
-        if(slot->dev) {
-                struct pci_dev *dev;
-                struct pci_dev_wrapped wrapped_dev;
-                struct pci_bus_wrapped wrapped_bus;
-                int i;
-
-                memset(&wrapped_dev, 0, sizeof (struct pci_dev_wrapped));
-                memset(&wrapped_bus, 0, sizeof (struct pci_bus_wrapped));
-
-                for (i = 0; i < 8; i++) {
-                        dev = pci_find_slot(slot->bus->number,
-                                            PCI_DEVFN(PCI_SLOT(slot->dev->devfn), i));
-                        if(!dev)
-                                continue;
-                        wrapped_dev.dev = dev;
-                        wrapped_bus.bus = slot->dev->bus;
-                        if(i)
-                                wrapped_dev.data = NULL;
-                        else
-                                wrapped_dev.data = (void*) slot;
-                        rc = pci_visit_dev(&configure_functions, &wrapped_dev, &wrapped_bus);
-                }
+
+        if (slot->dev->hdr_type == PCI_HEADER_TYPE_BRIDGE) {
+                pci_read_config_byte(slot->dev, PCI_SECONDARY_BUS, &busnr);
+                child = pci_add_new_bus(slot->dev->bus, slot->dev, busnr);
+                pci_do_scan_bus(child);
+                pci_bus_size_bridges(child);
         }
 
-        dbg("%s - exit, rc = %d", __FUNCTION__, rc);
-        return rc;
+        pci_bus_assign_resources(slot->dev->bus);
+
+        cpci_enable_device(slot->dev);
+
+        dbg("%s - exit", __FUNCTION__);
+        return 0;
 }
 
 int cpci_unconfigure_slot(struct slot* slot)
 {
-        int rc = 0;
         int i;
-        struct pci_dev_wrapped wrapped_dev;
-        struct pci_bus_wrapped wrapped_bus;
         struct pci_dev *dev;
 
         dbg("%s - enter", __FUNCTION__);
-
         if(!slot->dev) {
                 err("No device for slot %02x\n", slot->number);
                 return -ENODEV;
         }
 
-        memset(&wrapped_dev, 0, sizeof (struct pci_dev_wrapped));
-        memset(&wrapped_bus, 0, sizeof (struct pci_bus_wrapped));
-
         for (i = 0; i < 8; i++) {
                 dev = pci_find_slot(slot->bus->number,
                                     PCI_DEVFN(PCI_SLOT(slot->devfn), i));
                 if(dev) {
-                        wrapped_dev.dev = dev;
-                        wrapped_bus.bus = dev->bus;
-                        if(i)
-                                wrapped_dev.data = NULL;
-                        else
-                                wrapped_dev.data = (void*) slot;
-                        dbg("%s - unconfigure phase 2", __FUNCTION__);
-                        rc = pci_visit_dev(&unconfigure_functions_phase2,
-                                           &wrapped_dev,
-                                           &wrapped_bus);
-                        if(rc)
-                                break;
+                        pci_remove_bus_device(dev);
+                        slot->dev = NULL;
                 }
         }
-        dbg("%s - exit, rc = %d", __FUNCTION__, rc);
-        return rc;
+        dbg("%s - exit", __FUNCTION__);
+        return 0;
 }