Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 197 insertions, 0 deletions

diff --git a/drivers/pci/hotplug/Kconfig b/drivers/pci/hotplug/Kconfig
new file mode 100644
index 000000000000..1a4d4ca2a4dc
--- /dev/null
+++ b/drivers/pci/hotplug/Kconfig
@@ -0,0 +1,197 @@
+#
+# PCI Hotplug support
+#
+
+menu "PCI Hotplug Support"
+
+config HOTPLUG_PCI
+        tristate "Support for PCI Hotplug (EXPERIMENTAL)"
+        depends on PCI && EXPERIMENTAL
+        select HOTPLUG
+        ---help---
+          Say Y here if you have a motherboard with a PCI Hotplug controller.
+          This allows you to add and remove PCI cards while the machine is
+          powered up and running.  The file system pcihpfs must be mounted
+          in order to interact with any PCI Hotplug controllers.
+
+          To compile this driver as a module, choose M here: the
+          module will be called pci_hotplug.
+
+          When in doubt, say N.
+
+config HOTPLUG_PCI_FAKE
+        tristate "Fake PCI Hotplug driver"
+        depends on HOTPLUG_PCI
+        help
+          Say Y here if you want to use the fake PCI hotplug driver. It can
+          be used to simulate PCI hotplug events if even if your system is
+          not PCI hotplug capable.
+
+          This driver will "emulate" removing PCI devices from the system.
+          If the "power" file is written to with "0" then the specified PCI
+          device will be completely removed from the kernel.
+
+          WARNING, this does NOT turn off the power to the PCI device.
+          This is a "logical" removal, not a physical or electrical
+          removal.
+
+          Use this module at your own risk.  You have been warned!
+
+          To compile this driver as a module, choose M here: the
+          module will be called fakephp.
+
+          When in doubt, say N.
+
+config HOTPLUG_PCI_COMPAQ
+        tristate "Compaq PCI Hotplug driver"
+        depends on HOTPLUG_PCI && X86 && PCI_BIOS
+        help
+          Say Y here if you have a motherboard with a Compaq PCI Hotplug
+          controller.
+
+          To compile this driver as a module, choose M here: the
+          module will be called cpqphp.
+
+          When in doubt, say N.
+
+config HOTPLUG_PCI_COMPAQ_NVRAM
+        bool "Save configuration into NVRAM on Compaq servers"
+        depends on HOTPLUG_PCI_COMPAQ
+        help
+          Say Y here if you have a Compaq server that has a PCI Hotplug
+          controller.  This will allow the PCI Hotplug driver to store the PCI
+          system configuration options in NVRAM.
+
+          When in doubt, say N.
+
+config HOTPLUG_PCI_IBM
+        tristate "IBM PCI Hotplug driver"
+        depends on HOTPLUG_PCI && X86_IO_APIC && X86 && PCI_BIOS
+        help
+          Say Y here if you have a motherboard with a IBM PCI Hotplug
+          controller.
+
+          To compile this driver as a module, choose M here: the
+          module will be called ibmphp.
+
+          When in doubt, say N.
+
+config HOTPLUG_PCI_ACPI
+        tristate "ACPI PCI Hotplug driver"
+        depends on ACPI_BUS && HOTPLUG_PCI
+        help
+          Say Y here if you have a system that supports PCI Hotplug using
+          ACPI.
+
+          To compile this driver as a module, choose M here: the
+          module will be called acpiphp.
+
+          When in doubt, say N.
+
+config HOTPLUG_PCI_ACPI_IBM
+        tristate "ACPI PCI Hotplug driver IBM extensions"
+        depends on HOTPLUG_PCI_ACPI
+        help
+          Say Y here if you have an IBM system that supports PCI Hotplug using
+          ACPI.
+
+          To compile this driver as a module, choose M here: the
+          module will be called acpiphp_ibm.
+
+          When in doubt, say N.
+
+config HOTPLUG_PCI_CPCI
+        bool "CompactPCI Hotplug driver"
+        depends on HOTPLUG_PCI
+        help
+          Say Y here if you have a CompactPCI system card with CompactPCI
+          hotswap support per the PICMG 2.1 specification.
+
+          When in doubt, say N.
+
+config HOTPLUG_PCI_CPCI_ZT5550
+        tristate "Ziatech ZT5550 CompactPCI Hotplug driver"
+        depends on HOTPLUG_PCI && HOTPLUG_PCI_CPCI && X86
+        help
+          Say Y here if you have an Performance Technologies (formerly Intel,
+          formerly just Ziatech) Ziatech ZT5550 CompactPCI system card.
+
+          To compile this driver as a module, choose M here: the
+          module will be called cpcihp_zt5550.
+
+          When in doubt, say N.
+
+config HOTPLUG_PCI_CPCI_GENERIC
+        tristate "Generic port I/O CompactPCI Hotplug driver"
+        depends on HOTPLUG_PCI && HOTPLUG_PCI_CPCI && X86
+        help
+          Say Y here if you have a CompactPCI system card that exposes the #ENUM
+          hotswap signal as a bit in a system register that can be read through
+          standard port I/O.
+
+          To compile this driver as a module, choose M here: the
+          module will be called cpcihp_generic.
+
+          When in doubt, say N.
+
+config HOTPLUG_PCI_SHPC
+        tristate "SHPC PCI Hotplug driver"
+        depends on HOTPLUG_PCI
+        help
+          Say Y here if you have a motherboard with a SHPC PCI Hotplug
+          controller.
+
+          To compile this driver as a module, choose M here: the
+          module will be called shpchp.
+
+          When in doubt, say N.
+
+config HOTPLUG_PCI_SHPC_POLL_EVENT_MODE
+        bool "Use polling mechanism for hot-plug events (for testing purpose)"
+        depends on HOTPLUG_PCI_SHPC
+        help
+          Say Y here if you want to use the polling mechanism for hot-plug 
+          events for early platform testing.
+
+          When in doubt, say N.
+
+config HOTPLUG_PCI_SHPC_PHPRM_LEGACY
+        bool "For AMD SHPC only: Use $HRT for resource/configuration"
+        depends on HOTPLUG_PCI_SHPC && !ACPI_BUS 
+        help
+          Say Y here for AMD SHPC. You have to select this option if you are 
+          using this driver on platform with AMD SHPC.
+
+config HOTPLUG_PCI_RPA
+        tristate "RPA PCI Hotplug driver"
+        depends on HOTPLUG_PCI && PPC_PSERIES && PPC64 && !HOTPLUG_PCI_FAKE
+        help
+          Say Y here if you have a a RPA system that supports PCI Hotplug.
+
+          To compile this driver as a module, choose M here: the
+          module will be called rpaphp.
+
+          When in doubt, say N.
+
+config HOTPLUG_PCI_RPA_DLPAR
+        tristate "RPA Dynamic Logical Partitioning for I/O slots"
+        depends on HOTPLUG_PCI_RPA
+        help
+          Say Y here if your system supports Dynamic Logical Partitioning
+          for I/O slots.
+
+          To compile this driver as a module, choose M here: the
+          module will be called rpadlpar_io.
+ 
+          When in doubt, say N.
+
+config HOTPLUG_PCI_SGI
+        tristate "SGI PCI Hotplug Support"
+        depends on HOTPLUG_PCI && IA64_SGI_SN2
+        help
+          Say Y here if you have an SGI IA64 Altix system.
+
+          When in doubt, say N.
+
+endmenu
+