PCI: Setup disabled bridges even if buses are added

This patch sets up disabled bridges even if buses have already been
added.

pci_assign_unassigned_resources is called after buses are added.
pci_assign_unassigned_resources calls pci_bus_assign_resources.
pci_bus_assign_resources calls pci_setup_bridge to configure BARs of
bridges.

Currently pci_setup_bridge returns immediately if the bus have already
been added. So pci_assign_unassigned_resources can't configure BARs of
bridges that were added in a disabled state; this patch fixes the issue.

On logical hot-add, we need to prevent the kernel from re-initializing
bridges that have already been initialized. To achieve this,
pci_setup_bridge returns immediately if the bridge have already been
enabled.

We don't need to check whether the specified bus is a root bus or not.
pci_setup_bridge is not called on a root bus, because a root bus does
not have a bridge.

The patch adds a new helper function, pci_is_enabled. I made the
function name similar to pci_is_managed. The codes which use
enable_cnt directly are changed to use pci_is_enabled.

Acked-by: Alex Chiang <achiang@hp.com>
Signed-off-by: Yuji Shimada <shimada-yxb@necst.nec.co.jp>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>

1 files changed, 1 insertions, 1 deletions

diff --git a/drivers/pci/bus.c b/drivers/pci/bus.c
index 68f91a252595..97a8194063b5 100644
--- a/drivers/pci/bus.c
+++ b/drivers/pci/bus.c
@@ -184,7 +184,7 @@ void pci_enable_bridges(struct pci_bus *bus)
 
         list_for_each_entry(dev, &bus->devices, bus_list) {
                 if (dev->subordinate) {
-                        if (atomic_read(&dev->enable_cnt) == 0) {
+                        if (!pci_is_enabled(dev)) {
                                 retval = pci_enable_device(dev);
                                 pci_set_master(dev);
                         }