parport_pc: Coding style

Michael's patch fixed some of the coding style so the style is now
inconsistent. Sort the rest out

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

1 files changed, 916 insertions, 830 deletions

diff --git a/drivers/parport/parport_pc.c b/drivers/parport/parport_pc.c
index 24984c4a1ba4..edf83e945853 100644
--- a/drivers/parport/parport_pc.c
+++ b/drivers/parport/parport_pc.c
@@ -1,5 +1,5 @@
 /* Low-level parallel-port routines for 8255-based PC-style hardware.
- * 
+ *
  * Authors: Phil Blundell <philb@gnu.org>
  *          Tim Waugh <tim@cyberelk.demon.co.uk>
  *          Jose Renau <renau@acm.org>
@@ -11,7 +11,7 @@
  * Cleaned up include files - Russell King <linux@arm.uk.linux.org>
  * DMA support - Bert De Jonghe <bert@sophis.be>
  * Many ECP bugs fixed.  Fred Barnes & Jamie Lokier, 1999
- * More PCI support now conditional on CONFIG_PCI, 03/2001, Paul G. 
+ * More PCI support now conditional on CONFIG_PCI, 03/2001, Paul G.
  * Various hacks, Fred Barnes, 04/2001
  * Updated probing logic - Adam Belay <ambx1@neo.rr.com>
  */
@@ -56,10 +56,10 @@
 #include <linux/pnp.h>
 #include <linux/platform_device.h>
 #include <linux/sysctl.h>
+#include <linux/io.h>
+#include <linux/uaccess.h>
 
-#include <asm/io.h>
 #include <asm/dma.h>
-#include <asm/uaccess.h>
 
 #include <linux/parport.h>
 #include <linux/parport_pc.h>
@@ -82,7 +82,7 @@
 #define ECR_TST 06
 #define ECR_CNF 07
 #define ECR_MODE_MASK 0xe0
-#define ECR_WRITE(p,v) frob_econtrol((p),0xff,(v))
+#define ECR_WRITE(p, v) frob_econtrol((p), 0xff, (v))
 
 #undef DEBUG
 
@@ -109,27 +109,27 @@ static int pci_registered_parport;
 static int pnp_registered_parport;
 
 /* frob_control, but for ECR */
-static void frob_econtrol (struct parport *pb, unsigned char m,
+static void frob_econtrol(struct parport *pb, unsigned char m,
                            unsigned char v)
 {
         unsigned char ectr = 0;
 
         if (m != 0xff)
-                ectr = inb (ECONTROL (pb));
+                ectr = inb(ECONTROL(pb));
 
-        DPRINTK (KERN_DEBUG "frob_econtrol(%02x,%02x): %02x -> %02x\n",
+        DPRINTK(KERN_DEBUG "frob_econtrol(%02x,%02x): %02x -> %02x\n",
                 m, v, ectr, (ectr & ~m) ^ v);
 
-        outb ((ectr & ~m) ^ v, ECONTROL (pb));
+        outb((ectr & ~m) ^ v, ECONTROL(pb));
 }
 
-static __inline__ void frob_set_mode (struct parport *p, int mode)
+static inline void frob_set_mode(struct parport *p, int mode)
 {
-        frob_econtrol (p, ECR_MODE_MASK, mode << 5);
+        frob_econtrol(p, ECR_MODE_MASK, mode << 5);
 }
 
 #ifdef CONFIG_PARPORT_PC_FIFO
-/* Safely change the mode bits in the ECR 
+/* Safely change the mode bits in the ECR
    Returns:
             0    : Success
            -EBUSY: Could not drain FIFO in some finite amount of time,
@@ -141,17 +141,18 @@ static int change_mode(struct parport *p, int m)
         unsigned char oecr;
         int mode;
 
-        DPRINTK(KERN_INFO "parport change_mode ECP-ISA to mode 0x%02x\n",m);
+        DPRINTK(KERN_INFO "parport change_mode ECP-ISA to mode 0x%02x\n", m);
 
         if (!priv->ecr) {
-                printk (KERN_DEBUG "change_mode: but there's no ECR!\n");
+                printk(KERN_DEBUG "change_mode: but there's no ECR!\n");
                 return 0;
         }
 
         /* Bits <7:5> contain the mode. */
-        oecr = inb (ECONTROL (p));
+        oecr = inb(ECONTROL(p));
         mode = (oecr >> 5) & 0x7;
-        if (mode == m) return 0;
+        if (mode == m)
+                return 0;
 
         if (mode >= 2 && !(priv->ctr & 0x20)) {
                 /* This mode resets the FIFO, so we may
@@ -163,19 +164,21 @@ static int change_mode(struct parport *p, int m)
                 case ECR_ECP: /* ECP Parallel Port mode */
                         /* Busy wait for 200us */
                         for (counter = 0; counter < 40; counter++) {
-                                if (inb (ECONTROL (p)) & 0x01)
+                                if (inb(ECONTROL(p)) & 0x01)
                                         break;
-                                if (signal_pending (current)) break;
-                                udelay (5);
+                                if (signal_pending(current))
+                                        break;
+                                udelay(5);
                         }
 
                         /* Poll slowly. */
-                        while (!(inb (ECONTROL (p)) & 0x01)) {
-                                if (time_after_eq (jiffies, expire))
+                        while (!(inb(ECONTROL(p)) & 0x01)) {
+                                if (time_after_eq(jiffies, expire))
                                         /* The FIFO is stuck. */
                                         return -EBUSY;
-                                schedule_timeout_interruptible(msecs_to_jiffies(10));
-                                if (signal_pending (current))
+                                schedule_timeout_interruptible(
+                                                        msecs_to_jiffies(10));
+                                if (signal_pending(current))
                                         break;
                         }
                 }
@@ -185,20 +188,20 @@ static int change_mode(struct parport *p, int m)
                 /* We have to go through mode 001 */
                 oecr &= ~(7 << 5);
                 oecr |= ECR_PS2 << 5;
-                ECR_WRITE (p, oecr);
+                ECR_WRITE(p, oecr);
         }
 
         /* Set the mode. */
         oecr &= ~(7 << 5);
         oecr |= m << 5;
-        ECR_WRITE (p, oecr);
+        ECR_WRITE(p, oecr);
         return 0;
 }
 
 #ifdef CONFIG_PARPORT_1284
 /* Find FIFO lossage; FIFO is reset */
 #if 0
-static int get_fifo_residue (struct parport *p)
+static int get_fifo_residue(struct parport *p)
 {
         int residue;
         int cnfga;
@@ -206,26 +209,26 @@ static int get_fifo_residue (struct parport *p)
 
         /* Adjust for the contents of the FIFO. */
         for (residue = priv->fifo_depth; ; residue--) {
-                if (inb (ECONTROL (p)) & 0x2)
+                if (inb(ECONTROL(p)) & 0x2)
                                 /* Full up. */
                         break;
 
-                outb (0, FIFO (p));
+                outb(0, FIFO(p));
         }
 
-        printk (KERN_DEBUG "%s: %d PWords were left in FIFO\n", p->name,
+        printk(KERN_DEBUG "%s: %d PWords were left in FIFO\n", p->name,
                 residue);
 
         /* Reset the FIFO. */
-        frob_set_mode (p, ECR_PS2);
+        frob_set_mode(p, ECR_PS2);
 
         /* Now change to config mode and clean up. FIXME */
-        frob_set_mode (p, ECR_CNF);
-        cnfga = inb (CONFIGA (p));
-        printk (KERN_DEBUG "%s: cnfgA contains 0x%02x\n", p->name, cnfga);
+        frob_set_mode(p, ECR_CNF);
+        cnfga = inb(CONFIGA(p));
+        printk(KERN_DEBUG "%s: cnfgA contains 0x%02x\n", p->name, cnfga);
 
         if (!(cnfga & (1<<2))) {
-                printk (KERN_DEBUG "%s: Accounting for extra byte\n", p->name);
+                printk(KERN_DEBUG "%s: Accounting for extra byte\n", p->name);
                 residue++;
         }
 
@@ -233,9 +236,11 @@ static int get_fifo_residue (struct parport *p)
          * PWord != 1 byte. */
 
         /* Back to PS2 mode. */
-        frob_set_mode (p, ECR_PS2);
+        frob_set_mode(p, ECR_PS2);
 
-        DPRINTK (KERN_DEBUG "*** get_fifo_residue: done residue collecting (ecr = 0x%2.2x)\n", inb (ECONTROL (p)));
+        DPRINTK(KERN_DEBUG
+             "*** get_fifo_residue: done residue collecting (ecr = 0x%2.2x)\n",
+                                                        inb(ECONTROL(p)));
         return residue;
 }
 #endif  /*  0 */
@@ -257,8 +262,8 @@ static int clear_epp_timeout(struct parport *pb)
         /* To clear timeout some chips require double read */
         parport_pc_read_status(pb);
         r = parport_pc_read_status(pb);
-        outb (r | 0x01, STATUS (pb)); /* Some reset by writing 1 */
-        outb (r & 0xfe, STATUS (pb)); /* Others by writing 0 */
+        outb(r | 0x01, STATUS(pb)); /* Some reset by writing 1 */
+        outb(r & 0xfe, STATUS(pb)); /* Others by writing 0 */
         r = parport_pc_read_status(pb);
 
         return !(r & 0x01);
@@ -272,7 +277,8 @@ static int clear_epp_timeout(struct parport *pb)
  * of these are in parport_pc.h.
  */
 
-static void parport_pc_init_state(struct pardevice *dev, struct parport_state *s)
+static void parport_pc_init_state(struct pardevice *dev,
+                                                struct parport_state *s)
 {
         s->u.pc.ctr = 0xc;
         if (dev->irq_func &&
@@ -289,22 +295,23 @@ static void parport_pc_save_state(struct parport *p, struct parport_state *s)
         const struct parport_pc_private *priv = p->physport->private_data;
         s->u.pc.ctr = priv->ctr;
         if (priv->ecr)
-                s->u.pc.ecr = inb (ECONTROL (p));
+                s->u.pc.ecr = inb(ECONTROL(p));
 }
 
-static void parport_pc_restore_state(struct parport *p, struct parport_state *s)
+static void parport_pc_restore_state(struct parport *p,
+                                                struct parport_state *s)
 {
         struct parport_pc_private *priv = p->physport->private_data;
         register unsigned char c = s->u.pc.ctr & priv->ctr_writable;
-        outb (c, CONTROL (p));
+        outb(c, CONTROL(p));
         priv->ctr = c;
         if (priv->ecr)
-                ECR_WRITE (p, s->u.pc.ecr);
+                ECR_WRITE(p, s->u.pc.ecr);
 }
 
 #ifdef CONFIG_PARPORT_1284
-static size_t parport_pc_epp_read_data (struct parport *port, void *buf,
-                                        size_t length, int flags)
+static size_t parport_pc_epp_read_data(struct parport *port, void *buf,
+                                       size_t length, int flags)
 {
         size_t got = 0;
 
@@ -316,54 +323,52 @@ static size_t parport_pc_epp_read_data (struct parport *port, void *buf,
                  *  nFault is 0 if there is at least 1 byte in the Warp's FIFO
                  *  pError is 1 if there are 16 bytes in the Warp's FIFO
                  */
-                status = inb (STATUS (port));
+                status = inb(STATUS(port));
 
-                while (!(status & 0x08) && (got < length)) {
-                        if ((left >= 16) && (status & 0x20) && !(status & 0x08)) {
+                while (!(status & 0x08) && got < length) {
+                        if (left >= 16 && (status & 0x20) && !(status & 0x08)) {
                                 /* can grab 16 bytes from warp fifo */
-                                if (!((long)buf & 0x03)) {
-                                        insl (EPPDATA (port), buf, 4);
-                                } else {
-                                        insb (EPPDATA (port), buf, 16);
-                                }
+                                if (!((long)buf & 0x03))
+                                        insl(EPPDATA(port), buf, 4);
+                                else
+                                        insb(EPPDATA(port), buf, 16);
                                 buf += 16;
                                 got += 16;
                                 left -= 16;
                         } else {
                                 /* grab single byte from the warp fifo */
-                                *((char *)buf) = inb (EPPDATA (port));
+                                *((char *)buf) = inb(EPPDATA(port));
                                 buf++;
                                 got++;
                                 left--;
                         }
-                        status = inb (STATUS (port));
+                        status = inb(STATUS(port));
                         if (status & 0x01) {
                                 /* EPP timeout should never occur... */
-                                printk (KERN_DEBUG "%s: EPP timeout occurred while talking to "
-                                        "w91284pic (should not have done)\n", port->name);
-                                clear_epp_timeout (port);
+                                printk(KERN_DEBUG
+"%s: EPP timeout occurred while talking to w91284pic (should not have done)\n", port->name);
+                                clear_epp_timeout(port);
                         }
                 }
                 return got;
         }
         if ((flags & PARPORT_EPP_FAST) && (length > 1)) {
-                if (!(((long)buf | length) & 0x03)) {
-                        insl (EPPDATA (port), buf, (length >> 2));
-                } else {
-                        insb (EPPDATA (port), buf, length);
-                }
-                if (inb (STATUS (port)) & 0x01) {
-                        clear_epp_timeout (port);
+                if (!(((long)buf | length) & 0x03))
+                        insl(EPPDATA(port), buf, (length >> 2));
+                else
+                        insb(EPPDATA(port), buf, length);
+                if (inb(STATUS(port)) & 0x01) {
+                        clear_epp_timeout(port);
                         return -EIO;
                 }
                 return length;
         }
         for (; got < length; got++) {
-                *((char*)buf) = inb (EPPDATA(port));
+                *((char *)buf) = inb(EPPDATA(port));
                 buf++;
-                if (inb (STATUS (port)) & 0x01) {
+                if (inb(STATUS(port)) & 0x01) {
                         /* EPP timeout */
-                        clear_epp_timeout (port);
+                        clear_epp_timeout(port);
                         break;
                 }
         }
@@ -371,28 +376,27 @@ static size_t parport_pc_epp_read_data (struct parport *port, void *buf,
         return got;
 }
 
-static size_t parport_pc_epp_write_data (struct parport *port, const void *buf,
-                                         size_t length, int flags)
+static size_t parport_pc_epp_write_data(struct parport *port, const void *buf,
+                                        size_t length, int flags)
 {
         size_t written = 0;
 
         if ((flags & PARPORT_EPP_FAST) && (length > 1)) {
-                if (!(((long)buf | length) & 0x03)) {
-                        outsl (EPPDATA (port), buf, (length >> 2));
-                } else {
-                        outsb (EPPDATA (port), buf, length);
-                }
-                if (inb (STATUS (port)) & 0x01) {
-                        clear_epp_timeout (port);
+                if (!(((long)buf | length) & 0x03))
+                        outsl(EPPDATA(port), buf, (length >> 2));
+                else
+                        outsb(EPPDATA(port), buf, length);
+                if (inb(STATUS(port)) & 0x01) {
+                        clear_epp_timeout(port);
                         return -EIO;
                 }
                 return length;
         }
         for (; written < length; written++) {
-                outb (*((char*)buf), EPPDATA(port));
+                outb(*((char *)buf), EPPDATA(port));
                 buf++;
-                if (inb (STATUS(port)) & 0x01) {
-                        clear_epp_timeout (port);
+                if (inb(STATUS(port)) & 0x01) {
+                        clear_epp_timeout(port);
                         break;
                 }
         }
@@ -400,24 +404,24 @@ static size_t parport_pc_epp_write_data (struct parport *port, const void *buf,
         return written;
 }
 
-static size_t parport_pc_epp_read_addr (struct parport *port, void *buf,
+static size_t parport_pc_epp_read_addr(struct parport *port, void *buf,
                                         size_t length, int flags)
 {
         size_t got = 0;
 
         if ((flags & PARPORT_EPP_FAST) && (length > 1)) {
-                insb (EPPADDR (port), buf, length);
-                if (inb (STATUS (port)) & 0x01) {
-                        clear_epp_timeout (port);
+                insb(EPPADDR(port), buf, length);
+                if (inb(STATUS(port)) & 0x01) {
+                        clear_epp_timeout(port);
                         return -EIO;
                 }
                 return length;
         }
         for (; got < length; got++) {
-                *((char*)buf) = inb (EPPADDR (port));
+                *((char *)buf) = inb(EPPADDR(port));
                 buf++;
-                if (inb (STATUS (port)) & 0x01) {
-                        clear_epp_timeout (port);
+                if (inb(STATUS(port)) & 0x01) {
+                        clear_epp_timeout(port);
                         break;
                 }
         }
@@ -425,25 +429,25 @@ static size_t parport_pc_epp_read_addr (struct parport *port, void *buf,
         return got;
 }
 
-static size_t parport_pc_epp_write_addr (struct parport *port,
+static size_t parport_pc_epp_write_addr(struct parport *port,
                                          const void *buf, size_t length,
                                          int flags)
 {
         size_t written = 0;
 
         if ((flags & PARPORT_EPP_FAST) && (length > 1)) {
-                outsb (EPPADDR (port), buf, length);
-                if (inb (STATUS (port)) & 0x01) {
-                        clear_epp_timeout (port);
+                outsb(EPPADDR(port), buf, length);
+                if (inb(STATUS(port)) & 0x01) {
+                        clear_epp_timeout(port);
                         return -EIO;
                 }
                 return length;
         }
         for (; written < length; written++) {
-                outb (*((char*)buf), EPPADDR (port));
+                outb(*((char *)buf), EPPADDR(port));
                 buf++;
-                if (inb (STATUS (port)) & 0x01) {
-                        clear_epp_timeout (port);
+                if (inb(STATUS(port)) & 0x01) {
+                        clear_epp_timeout(port);
                         break;
                 }
         }
@@ -451,74 +455,74 @@ static size_t parport_pc_epp_write_addr (struct parport *port,
         return written;
 }
 
-static size_t parport_pc_ecpepp_read_data (struct parport *port, void *buf,
-                                           size_t length, int flags)
+static size_t parport_pc_ecpepp_read_data(struct parport *port, void *buf,
+                                          size_t length, int flags)
 {
         size_t got;
 
-        frob_set_mode (port, ECR_EPP);
-        parport_pc_data_reverse (port);
-        parport_pc_write_control (port, 0x4);
-        got = parport_pc_epp_read_data (port, buf, length, flags);
-        frob_set_mode (port, ECR_PS2);
+        frob_set_mode(port, ECR_EPP);
+        parport_pc_data_reverse(port);
+        parport_pc_write_control(port, 0x4);
+        got = parport_pc_epp_read_data(port, buf, length, flags);
+        frob_set_mode(port, ECR_PS2);
 
         return got;
 }
 
-static size_t parport_pc_ecpepp_write_data (struct parport *port,
-                                            const void *buf, size_t length,
-                                            int flags)
+static size_t parport_pc_ecpepp_write_data(struct parport *port,
+                                           const void *buf, size_t length,
+                                           int flags)
 {
         size_t written;
 
-        frob_set_mode (port, ECR_EPP);
-        parport_pc_write_control (port, 0x4);
-        parport_pc_data_forward (port);
-        written = parport_pc_epp_write_data (port, buf, length, flags);
-        frob_set_mode (port, ECR_PS2);
+        frob_set_mode(port, ECR_EPP);
+        parport_pc_write_control(port, 0x4);
+        parport_pc_data_forward(port);
+        written = parport_pc_epp_write_data(port, buf, length, flags);
+        frob_set_mode(port, ECR_PS2);
 
         return written;
 }
 
-static size_t parport_pc_ecpepp_read_addr (struct parport *port, void *buf,
-                                           size_t length, int flags)
+static size_t parport_pc_ecpepp_read_addr(struct parport *port, void *buf,
+                                          size_t length, int flags)
 {
         size_t got;
 
-        frob_set_mode (port, ECR_EPP);
-        parport_pc_data_reverse (port);
-        parport_pc_write_control (port, 0x4);
-        got = parport_pc_epp_read_addr (port, buf, length, flags);
-        frob_set_mode (port, ECR_PS2);
+        frob_set_mode(port, ECR_EPP);
+        parport_pc_data_reverse(port);
+        parport_pc_write_control(port, 0x4);
+        got = parport_pc_epp_read_addr(port, buf, length, flags);
+        frob_set_mode(port, ECR_PS2);
 
         return got;
 }
 
-static size_t parport_pc_ecpepp_write_addr (struct parport *port,
+static size_t parport_pc_ecpepp_write_addr(struct parport *port,
                                             const void *buf, size_t length,
                                             int flags)
 {
         size_t written;
 
-        frob_set_mode (port, ECR_EPP);
-        parport_pc_write_control (port, 0x4);
-        parport_pc_data_forward (port);
-        written = parport_pc_epp_write_addr (port, buf, length, flags);
-        frob_set_mode (port, ECR_PS2);
+        frob_set_mode(port, ECR_EPP);
+        parport_pc_write_control(port, 0x4);
+        parport_pc_data_forward(port);
+        written = parport_pc_epp_write_addr(port, buf, length, flags);
+        frob_set_mode(port, ECR_PS2);
 
         return written;
 }
 #endif /* IEEE 1284 support */
 
 #ifdef CONFIG_PARPORT_PC_FIFO
-static size_t parport_pc_fifo_write_block_pio (struct parport *port,
+static size_t parport_pc_fifo_write_block_pio(struct parport *port,
                                                const void *buf, size_t length)
 {
         int ret = 0;
         const unsigned char *bufp = buf;
         size_t left = length;
         unsigned long expire = jiffies + port->physport->cad->timeout;
-        const int fifo = FIFO (port);
+        const int fifo = FIFO(port);
         int poll_for = 8; /* 80 usecs */
         const struct parport_pc_private *priv = port->physport->private_data;
         const int fifo_depth = priv->fifo_depth;
@@ -526,25 +530,25 @@ static size_t parport_pc_fifo_write_block_pio (struct parport *port,
         port = port->physport;
 
         /* We don't want to be interrupted every character. */
-        parport_pc_disable_irq (port);
+        parport_pc_disable_irq(port);
         /* set nErrIntrEn and serviceIntr */
-        frob_econtrol (port, (1<<4) | (1<<2), (1<<4) | (1<<2));
+        frob_econtrol(port, (1<<4) | (1<<2), (1<<4) | (1<<2));
 
         /* Forward mode. */
-        parport_pc_data_forward (port); /* Must be in PS2 mode */
+        parport_pc_data_forward(port); /* Must be in PS2 mode */
 
         while (left) {
                 unsigned char byte;
-                unsigned char ecrval = inb (ECONTROL (port));
+                unsigned char ecrval = inb(ECONTROL(port));
                 int i = 0;
 
-                if (need_resched() && time_before (jiffies, expire))
+                if (need_resched() && time_before(jiffies, expire))
                         /* Can't yield the port. */
-                        schedule ();
+                        schedule();
 
                 /* Anyone else waiting for the port? */
                 if (port->waithead) {
-                        printk (KERN_DEBUG "Somebody wants the port\n");
+                        printk(KERN_DEBUG "Somebody wants the port\n");
                         break;
                 }
 
@@ -552,21 +556,22 @@ static size_t parport_pc_fifo_write_block_pio (struct parport *port,
                         /* FIFO is full. Wait for interrupt. */
 
                         /* Clear serviceIntr */
-                        ECR_WRITE (port, ecrval & ~(1<<2));
-                false_alarm:
-                        ret = parport_wait_event (port, HZ);
-                        if (ret < 0) break;
+                        ECR_WRITE(port, ecrval & ~(1<<2));
+false_alarm:
+                        ret = parport_wait_event(port, HZ);
+                        if (ret < 0)
+                                break;
                         ret = 0;
-                        if (!time_before (jiffies, expire)) {
+                        if (!time_before(jiffies, expire)) {
                                 /* Timed out. */
-                                printk (KERN_DEBUG "FIFO write timed out\n");
+                                printk(KERN_DEBUG "FIFO write timed out\n");
                                 break;
                         }
-                        ecrval = inb (ECONTROL (port));
+                        ecrval = inb(ECONTROL(port));
                         if (!(ecrval & (1<<2))) {
                                 if (need_resched() &&
-                                    time_before (jiffies, expire))
-                                        schedule ();
+                                    time_before(jiffies, expire))
+                                        schedule();
 
                                 goto false_alarm;
                         }
@@ -577,38 +582,38 @@ static size_t parport_pc_fifo_write_block_pio (struct parport *port,
                 /* Can't fail now. */
                 expire = jiffies + port->cad->timeout;
 
-        poll:
-                if (signal_pending (current))
+poll:
+                if (signal_pending(current))
                         break;
 
                 if (ecrval & 0x01) {
                         /* FIFO is empty. Blast it full. */
                         const int n = left < fifo_depth ? left : fifo_depth;
-                        outsb (fifo, bufp, n);
+                        outsb(fifo, bufp, n);
                         bufp += n;
                         left -= n;
 
                         /* Adjust the poll time. */
-                        if (i < (poll_for - 2)) poll_for--;
+                        if (i < (poll_for - 2))
+                                poll_for--;
                         continue;
                 } else if (i++ < poll_for) {
-                        udelay (10);
-                        ecrval = inb (ECONTROL (port));
+                        udelay(10);
+                        ecrval = inb(ECONTROL(port));
                         goto poll;
                 }
 
-                /* Half-full (call me an optimist) */
+                /* Half-full(call me an optimist) */
                 byte = *bufp++;
-                outb (byte, fifo);
+                outb(byte, fifo);
                 left--;
-        }
-
-dump_parport_state ("leave fifo_write_block_pio", port);
+        }
+        dump_parport_state("leave fifo_write_block_pio", port);
         return length - left;
 }
 
 #ifdef HAS_DMA
-static size_t parport_pc_fifo_write_block_dma (struct parport *port,
+static size_t parport_pc_fifo_write_block_dma(struct parport *port,
                                                const void *buf, size_t length)
 {
         int ret = 0;
@@ -621,7 +626,7 @@ static size_t parport_pc_fifo_write_block_dma (struct parport *port,
         unsigned long start = (unsigned long) buf;
         unsigned long end = (unsigned long) buf + length - 1;
 
-dump_parport_state ("enter fifo_write_block_dma", port);
+dump_parport_state("enter fifo_write_block_dma", port);
         if (end < MAX_DMA_ADDRESS) {
                 /* If it would cross a 64k boundary, cap it at the end. */
                 if ((start ^ end) & ~0xffffUL)
@@ -629,8 +634,9 @@ dump_parport_state ("enter fifo_write_block_dma", port);
 
                 dma_addr = dma_handle = dma_map_single(dev, (void *)buf, length,
                                                        DMA_TO_DEVICE);
-        } else {
-                /* above 16 MB we use a bounce buffer as ISA-DMA is not possible */
+        } else {
+                /* above 16 MB we use a bounce buffer as ISA-DMA
+                   is not possible */
                 maxlen   = PAGE_SIZE;          /* sizeof(priv->dma_buf) */
                 dma_addr = priv->dma_handle;
                 dma_handle = 0;
@@ -639,12 +645,12 @@ dump_parport_state ("enter fifo_write_block_dma", port);
         port = port->physport;
 
         /* We don't want to be interrupted every character. */
-        parport_pc_disable_irq (port);
+        parport_pc_disable_irq(port);
         /* set nErrIntrEn and serviceIntr */
-        frob_econtrol (port, (1<<4) | (1<<2), (1<<4) | (1<<2));
+        frob_econtrol(port, (1<<4) | (1<<2), (1<<4) | (1<<2));
 
         /* Forward mode. */
-        parport_pc_data_forward (port); /* Must be in PS2 mode */
+        parport_pc_data_forward(port); /* Must be in PS2 mode */
 
         while (left) {
                 unsigned long expire = jiffies + port->physport->cad->timeout;
@@ -665,10 +671,10 @@ dump_parport_state ("enter fifo_write_block_dma", port);
                 set_dma_count(port->dma, count);
 
                 /* Set DMA mode */
-                frob_econtrol (port, 1<<3, 1<<3);
+                frob_econtrol(port, 1<<3, 1<<3);
 
                 /* Clear serviceIntr */
-                frob_econtrol (port, 1<<2, 0);
+                frob_econtrol(port, 1<<2, 0);
 
                 enable_dma(port->dma);
                 release_dma_lock(dmaflag);
@@ -676,20 +682,22 @@ dump_parport_state ("enter fifo_write_block_dma", port);
                 /* assume DMA will be successful */
                 left -= count;
                 buf  += count;
-                if (dma_handle) dma_addr += count;
+                if (dma_handle)
+                        dma_addr += count;
 
                 /* Wait for interrupt. */
-        false_alarm:
-                ret = parport_wait_event (port, HZ);
-                if (ret < 0) break;
+false_alarm:
+                ret = parport_wait_event(port, HZ);
+                if (ret < 0)
+                        break;
                 ret = 0;
-                if (!time_before (jiffies, expire)) {
+                if (!time_before(jiffies, expire)) {
                         /* Timed out. */
-                        printk (KERN_DEBUG "DMA write timed out\n");
+                        printk(KERN_DEBUG "DMA write timed out\n");
                         break;
                 }
                 /* Is serviceIntr set? */
-                if (!(inb (ECONTROL (port)) & (1<<2))) {
+                if (!(inb(ECONTROL(port)) & (1<<2))) {
                         cond_resched();
 
                         goto false_alarm;
@@ -705,14 +713,15 @@ dump_parport_state ("enter fifo_write_block_dma", port);
 
                 /* Anyone else waiting for the port? */
                 if (port->waithead) {
-                        printk (KERN_DEBUG "Somebody wants the port\n");
+                        printk(KERN_DEBUG "Somebody wants the port\n");
                         break;
                 }
 
                 /* update for possible DMA residue ! */
                 buf  -= count;
                 left += count;
-                if (dma_handle) dma_addr -= count;
+                if (dma_handle)
+                        dma_addr -= count;
         }
 
         /* Maybe got here through break, so adjust for DMA residue! */
@@ -723,12 +732,12 @@ dump_parport_state ("enter fifo_write_block_dma", port);
         release_dma_lock(dmaflag);
 
         /* Turn off DMA mode */
-        frob_econtrol (port, 1<<3, 0);
+        frob_econtrol(port, 1<<3, 0);
 
         if (dma_handle)
                 dma_unmap_single(dev, dma_handle, length, DMA_TO_DEVICE);
 
-dump_parport_state ("leave fifo_write_block_dma", port);
+dump_parport_state("leave fifo_write_block_dma", port);
         return length - left;
 }
 #endif
@@ -738,13 +747,13 @@ static inline size_t parport_pc_fifo_write_block(struct parport *port,
 {
 #ifdef HAS_DMA
         if (port->dma != PARPORT_DMA_NONE)
-                return parport_pc_fifo_write_block_dma (port, buf, length);
+                return parport_pc_fifo_write_block_dma(port, buf, length);
 #endif
-        return parport_pc_fifo_write_block_pio (port, buf, length);
+        return parport_pc_fifo_write_block_pio(port, buf, length);
 }
 
 /* Parallel Port FIFO mode (ECP chipsets) */
-static size_t parport_pc_compat_write_block_pio (struct parport *port,
+static size_t parport_pc_compat_write_block_pio(struct parport *port,
                                                  const void *buf, size_t length,
                                                  int flags)
 {
@@ -756,14 +765,16 @@ static size_t parport_pc_compat_write_block_pio (struct parport *port,
         /* Special case: a timeout of zero means we cannot call schedule().
          * Also if O_NONBLOCK is set then use the default implementation. */
         if (port->physport->cad->timeout <= PARPORT_INACTIVITY_O_NONBLOCK)
-                return parport_ieee1284_write_compat (port, buf,
+                return parport_ieee1284_write_compat(port, buf,
                                                       length, flags);
 
         /* Set up parallel port FIFO mode.*/
-        parport_pc_data_forward (port); /* Must be in PS2 mode */
-        parport_pc_frob_control (port, PARPORT_CONTROL_STROBE, 0);
-        r = change_mode (port, ECR_PPF); /* Parallel port FIFO */
-        if (r)  printk (KERN_DEBUG "%s: Warning change_mode ECR_PPF failed\n", port->name);
+        parport_pc_data_forward(port); /* Must be in PS2 mode */
+        parport_pc_frob_control(port, PARPORT_CONTROL_STROBE, 0);
+        r = change_mode(port, ECR_PPF); /* Parallel port FIFO */
+        if (r)
+                printk(KERN_DEBUG "%s: Warning change_mode ECR_PPF failed\n",
+                                                                port->name);
 
         port->physport->ieee1284.phase = IEEE1284_PH_FWD_DATA;
 
@@ -775,40 +786,39 @@ static size_t parport_pc_compat_write_block_pio (struct parport *port,
          * the FIFO is empty, so allow 4 seconds for each position
          * in the fifo.
          */
-        expire = jiffies + (priv->fifo_depth * HZ * 4);
+        expire = jiffies + (priv->fifo_depth * HZ * 4);
         do {
                 /* Wait for the FIFO to empty */
-                r = change_mode (port, ECR_PS2);
-                if (r != -EBUSY) {
+                r = change_mode(port, ECR_PS2);
+                if (r != -EBUSY)
                         break;
-                }
-        } while (time_before (jiffies, expire));
+        } while (time_before(jiffies, expire));
         if (r == -EBUSY) {
 
-                printk (KERN_DEBUG "%s: FIFO is stuck\n", port->name);
+                printk(KERN_DEBUG "%s: FIFO is stuck\n", port->name);
 
                 /* Prevent further data transfer. */
-                frob_set_mode (port, ECR_TST);
+                frob_set_mode(port, ECR_TST);
 
                 /* Adjust for the contents of the FIFO. */
                 for (written -= priv->fifo_depth; ; written++) {
-                        if (inb (ECONTROL (port)) & 0x2) {
+                        if (inb(ECONTROL(port)) & 0x2) {
                                 /* Full up. */
                                 break;
                         }
-                        outb (0, FIFO (port));
+                        outb(0, FIFO(port));
                 }
 
                 /* Reset the FIFO and return to PS2 mode. */
-                frob_set_mode (port, ECR_PS2);
+                frob_set_mode(port, ECR_PS2);
         }
 
-        r = parport_wait_peripheral (port,
+        r = parport_wait_peripheral(port,
                                      PARPORT_STATUS_BUSY,
                                      PARPORT_STATUS_BUSY);
         if (r)
-                printk (KERN_DEBUG
-                        "%s: BUSY timeout (%d) in compat_write_block_pio\n", 
+                printk(KERN_DEBUG
+                        "%s: BUSY timeout (%d) in compat_write_block_pio\n",
                         port->name, r);
 
         port->physport->ieee1284.phase = IEEE1284_PH_FWD_IDLE;
@@ -818,7 +828,7 @@ static size_t parport_pc_compat_write_block_pio (struct parport *port,
 
 /* ECP */
 #ifdef CONFIG_PARPORT_1284
-static size_t parport_pc_ecp_write_block_pio (struct parport *port,
+static size_t parport_pc_ecp_write_block_pio(struct parport *port,
                                               const void *buf, size_t length,
                                               int flags)
 {
@@ -830,36 +840,38 @@ static size_t parport_pc_ecp_write_block_pio (struct parport *port,
         /* Special case: a timeout of zero means we cannot call schedule().
          * Also if O_NONBLOCK is set then use the default implementation. */
         if (port->physport->cad->timeout <= PARPORT_INACTIVITY_O_NONBLOCK)
-                return parport_ieee1284_ecp_write_data (port, buf,
+                return parport_ieee1284_ecp_write_data(port, buf,
                                                         length, flags);
 
         /* Switch to forward mode if necessary. */
         if (port->physport->ieee1284.phase != IEEE1284_PH_FWD_IDLE) {
                 /* Event 47: Set nInit high. */
-                parport_frob_control (port,
+                parport_frob_control(port,
                                       PARPORT_CONTROL_INIT
                                       | PARPORT_CONTROL_AUTOFD,
                                       PARPORT_CONTROL_INIT
                                       | PARPORT_CONTROL_AUTOFD);
 
                 /* Event 49: PError goes high. */
-                r = parport_wait_peripheral (port,
+                r = parport_wait_peripheral(port,
                                              PARPORT_STATUS_PAPEROUT,
                                              PARPORT_STATUS_PAPEROUT);
                 if (r) {
-                        printk (KERN_DEBUG "%s: PError timeout (%d) "
+                        printk(KERN_DEBUG "%s: PError timeout (%d) "
                                 "in ecp_write_block_pio\n", port->name, r);
                 }
         }
 
         /* Set up ECP parallel port mode.*/
-        parport_pc_data_forward (port); /* Must be in PS2 mode */
-        parport_pc_frob_control (port,
+        parport_pc_data_forward(port); /* Must be in PS2 mode */
+        parport_pc_frob_control(port,
                                  PARPORT_CONTROL_STROBE |
                                  PARPORT_CONTROL_AUTOFD,
                                  0);
-        r = change_mode (port, ECR_ECP); /* ECP FIFO */
-        if (r) printk (KERN_DEBUG "%s: Warning change_mode ECR_ECP failed\n", port->name);
+        r = change_mode(port, ECR_ECP); /* ECP FIFO */
+        if (r)
+                printk(KERN_DEBUG "%s: Warning change_mode ECR_ECP failed\n",
+                                                                port->name);
         port->physport->ieee1284.phase = IEEE1284_PH_FWD_DATA;
 
         /* Write the data to the FIFO. */
@@ -873,55 +885,54 @@ static size_t parport_pc_ecp_write_block_pio (struct parport *port,
         expire = jiffies + (priv->fifo_depth * (HZ * 4));
         do {
                 /* Wait for the FIFO to empty */
-                r = change_mode (port, ECR_PS2);
-                if (r != -EBUSY) {
+                r = change_mode(port, ECR_PS2);
+                if (r != -EBUSY)
                         break;
-                }
-        } while (time_before (jiffies, expire));
+        } while (time_before(jiffies, expire));
         if (r == -EBUSY) {
 
-                printk (KERN_DEBUG "%s: FIFO is stuck\n", port->name);
+                printk(KERN_DEBUG "%s: FIFO is stuck\n", port->name);
 
                 /* Prevent further data transfer. */
-                frob_set_mode (port, ECR_TST);
+                frob_set_mode(port, ECR_TST);
 
                 /* Adjust for the contents of the FIFO. */
                 for (written -= priv->fifo_depth; ; written++) {
-                        if (inb (ECONTROL (port)) & 0x2) {
+                        if (inb(ECONTROL(port)) & 0x2) {
                                 /* Full up. */
                                 break;
                         }
-                        outb (0, FIFO (port));
+                        outb(0, FIFO(port));
                 }
 
                 /* Reset the FIFO and return to PS2 mode. */
-                frob_set_mode (port, ECR_PS2);
+                frob_set_mode(port, ECR_PS2);
 
                 /* Host transfer recovery. */
-                parport_pc_data_reverse (port); /* Must be in PS2 mode */
-                udelay (5);
-                parport_frob_control (port, PARPORT_CONTROL_INIT, 0);
-                r = parport_wait_peripheral (port, PARPORT_STATUS_PAPEROUT, 0);
+                parport_pc_data_reverse(port); /* Must be in PS2 mode */
+                udelay(5);
+                parport_frob_control(port, PARPORT_CONTROL_INIT, 0);
+                r = parport_wait_peripheral(port, PARPORT_STATUS_PAPEROUT, 0);
                 if (r)
-                        printk (KERN_DEBUG "%s: PE,1 timeout (%d) "
+                        printk(KERN_DEBUG "%s: PE,1 timeout (%d) "
                                 "in ecp_write_block_pio\n", port->name, r);
 
-                parport_frob_control (port,
+                parport_frob_control(port,
                                       PARPORT_CONTROL_INIT,
                                       PARPORT_CONTROL_INIT);
-                r = parport_wait_peripheral (port,
+                r = parport_wait_peripheral(port,
                                              PARPORT_STATUS_PAPEROUT,
                                              PARPORT_STATUS_PAPEROUT);
-                if (r)
-                        printk (KERN_DEBUG "%s: PE,2 timeout (%d) "
+                if (r)
+                        printk(KERN_DEBUG "%s: PE,2 timeout (%d) "
                                 "in ecp_write_block_pio\n", port->name, r);
         }
 
-        r = parport_wait_peripheral (port,
-                                     PARPORT_STATUS_BUSY, 
+        r = parport_wait_peripheral(port,
+                                     PARPORT_STATUS_BUSY,
                                      PARPORT_STATUS_BUSY);
-        if(r)
-                printk (KERN_DEBUG
+        if (r)
+                printk(KERN_DEBUG
                         "%s: BUSY timeout (%d) in ecp_write_block_pio\n",
                         port->name, r);
 
@@ -931,7 +942,7 @@ static size_t parport_pc_ecp_write_block_pio (struct parport *port,
 }
 
 #if 0
-static size_t parport_pc_ecp_read_block_pio (struct parport *port,
+static size_t parport_pc_ecp_read_block_pio(struct parport *port,
                                              void *buf, size_t length,
                                              int flags)
 {
@@ -944,13 +955,13 @@ static size_t parport_pc_ecp_read_block_pio (struct parport *port,
         char *bufp = buf;
 
         port = port->physport;
-DPRINTK (KERN_DEBUG "parport_pc: parport_pc_ecp_read_block_pio\n");
-dump_parport_state ("enter fcn", port);
+DPRINTK(KERN_DEBUG "parport_pc: parport_pc_ecp_read_block_pio\n");
+dump_parport_state("enter fcn", port);
 
         /* Special case: a timeout of zero means we cannot call schedule().
          * Also if O_NONBLOCK is set then use the default implementation. */
         if (port->cad->timeout <= PARPORT_INACTIVITY_O_NONBLOCK)
-                return parport_ieee1284_ecp_read_data (port, buf,
+                return parport_ieee1284_ecp_read_data(port, buf,
                                                        length, flags);
 
         if (port->ieee1284.mode == IEEE1284_MODE_ECPRLE) {
@@ -966,173 +977,177 @@ dump_parport_state ("enter fcn", port);
          * go through software emulation.  Otherwise we may have to throw
          * away data. */
         if (length < fifofull)
-                return parport_ieee1284_ecp_read_data (port, buf,
+                return parport_ieee1284_ecp_read_data(port, buf,
                                                        length, flags);
 
         if (port->ieee1284.phase != IEEE1284_PH_REV_IDLE) {
                 /* change to reverse-idle phase (must be in forward-idle) */
 
                 /* Event 38: Set nAutoFd low (also make sure nStrobe is high) */
-                parport_frob_control (port,
+                parport_frob_control(port,
                                       PARPORT_CONTROL_AUTOFD
                                       | PARPORT_CONTROL_STROBE,
                                       PARPORT_CONTROL_AUTOFD);
-                parport_pc_data_reverse (port); /* Must be in PS2 mode */
-                udelay (5);
+                parport_pc_data_reverse(port); /* Must be in PS2 mode */
+                udelay(5);
                 /* Event 39: Set nInit low to initiate bus reversal */
-                parport_frob_control (port,
+                parport_frob_control(port,
                                       PARPORT_CONTROL_INIT,
                                       0);
                 /* Event 40: Wait for  nAckReverse (PError) to go low */
-                r = parport_wait_peripheral (port, PARPORT_STATUS_PAPEROUT, 0);
-                if (r) {
-                        printk (KERN_DEBUG "%s: PE timeout Event 40 (%d) "
+                r = parport_wait_peripheral(port, PARPORT_STATUS_PAPEROUT, 0);
+                if (r) {
+                        printk(KERN_DEBUG "%s: PE timeout Event 40 (%d) "
                                 "in ecp_read_block_pio\n", port->name, r);
                         return 0;
                 }
         }
 
         /* Set up ECP FIFO mode.*/
-/*      parport_pc_frob_control (port,
+/*      parport_pc_frob_control(port,
                                  PARPORT_CONTROL_STROBE |
                                  PARPORT_CONTROL_AUTOFD,
                                  PARPORT_CONTROL_AUTOFD); */
-        r = change_mode (port, ECR_ECP); /* ECP FIFO */
-        if (r) printk (KERN_DEBUG "%s: Warning change_mode ECR_ECP failed\n", port->name);
+        r = change_mode(port, ECR_ECP); /* ECP FIFO */
+        if (r)
+                printk(KERN_DEBUG "%s: Warning change_mode ECR_ECP failed\n",
+                                                                port->name);
 
         port->ieee1284.phase = IEEE1284_PH_REV_DATA;
 
         /* the first byte must be collected manually */
-dump_parport_state ("pre 43", port);
+        dump_parport_state("pre 43", port);
         /* Event 43: Wait for nAck to go low */
-        r = parport_wait_peripheral (port, PARPORT_STATUS_ACK, 0);
+        r = parport_wait_peripheral(port, PARPORT_STATUS_ACK, 0);
         if (r) {
                 /* timed out while reading -- no data */
-                printk (KERN_DEBUG "PIO read timed out (initial byte)\n");
+                printk(KERN_DEBUG "PIO read timed out (initial byte)\n");
                 goto out_no_data;
         }
         /* read byte */
-        *bufp++ = inb (DATA (port));
+        *bufp++ = inb(DATA(port));
         left--;
-dump_parport_state ("43-44", port);
+        dump_parport_state("43-44", port);
         /* Event 44: nAutoFd (HostAck) goes high to acknowledge */
-        parport_pc_frob_control (port,
+        parport_pc_frob_control(port,
                                  PARPORT_CONTROL_AUTOFD,
                                  0);
-dump_parport_state ("pre 45", port);
+        dump_parport_state("pre 45", port);
         /* Event 45: Wait for nAck to go high */
-/*      r = parport_wait_peripheral (port, PARPORT_STATUS_ACK, PARPORT_STATUS_ACK); */
-dump_parport_state ("post 45", port);
-r = 0;
+        /* r = parport_wait_peripheral(port, PARPORT_STATUS_ACK,
+                                                PARPORT_STATUS_ACK); */
+        dump_parport_state("post 45", port);
+        r = 0;
         if (r) {
                 /* timed out while waiting for peripheral to respond to ack */
-                printk (KERN_DEBUG "ECP PIO read timed out (waiting for nAck)\n");
+                printk(KERN_DEBUG "ECP PIO read timed out (waiting for nAck)\n");
 
                 /* keep hold of the byte we've got already */
                 goto out_no_data;
         }
         /* Event 46: nAutoFd (HostAck) goes low to accept more data */
-        parport_pc_frob_control (port,
+        parport_pc_frob_control(port,
                                  PARPORT_CONTROL_AUTOFD,
                                  PARPORT_CONTROL_AUTOFD);
 
 
-dump_parport_state ("rev idle", port);
+        dump_parport_state("rev idle", port);
         /* Do the transfer. */
         while (left > fifofull) {
                 int ret;
                 unsigned long expire = jiffies + port->cad->timeout;
-                unsigned char ecrval = inb (ECONTROL (port));
+                unsigned char ecrval = inb(ECONTROL(port));
 
-                if (need_resched() && time_before (jiffies, expire))
+                if (need_resched() && time_before(jiffies, expire))
                         /* Can't yield the port. */
-                        schedule ();
+                        schedule();
 
                 /* At this point, the FIFO may already be full. In
-                 * that case ECP is already holding back the
-                 * peripheral (assuming proper design) with a delayed
-                 * handshake.  Work fast to avoid a peripheral
-                 * timeout.  */
+                 * that case ECP is already holding back the
+                 * peripheral (assuming proper design) with a delayed
+                 * handshake.  Work fast to avoid a peripheral
+                 * timeout.  */
 
                 if (ecrval & 0x01) {
                         /* FIFO is empty. Wait for interrupt. */
-dump_parport_state ("FIFO empty", port);
+                        dump_parport_state("FIFO empty", port);
 
                         /* Anyone else waiting for the port? */
                         if (port->waithead) {
-                                printk (KERN_DEBUG "Somebody wants the port\n");
+                                printk(KERN_DEBUG "Somebody wants the port\n");
                                 break;
                         }
 
                         /* Clear serviceIntr */
-                        ECR_WRITE (port, ecrval & ~(1<<2));
-                false_alarm:
-dump_parport_state ("waiting", port);
-                        ret = parport_wait_event (port, HZ);
-DPRINTK (KERN_DEBUG "parport_wait_event returned %d\n", ret);
+                        ECR_WRITE(port, ecrval & ~(1<<2));
+false_alarm:
+                        dump_parport_state("waiting", port);
+                        ret = parport_wait_event(port, HZ);
+                        DPRINTK(KERN_DEBUG "parport_wait_event returned %d\n",
+                                                                        ret);
                         if (ret < 0)
                                 break;
                         ret = 0;
-                        if (!time_before (jiffies, expire)) {
+                        if (!time_before(jiffies, expire)) {
                                 /* Timed out. */
-dump_parport_state ("timeout", port);
-                                printk (KERN_DEBUG "PIO read timed out\n");
+                                dump_parport_state("timeout", port);
+                                printk(KERN_DEBUG "PIO read timed out\n");
                                 break;
                         }
-                        ecrval = inb (ECONTROL (port));
+                        ecrval = inb(ECONTROL(port));
                         if (!(ecrval & (1<<2))) {
                                 if (need_resched() &&
-                                    time_before (jiffies, expire)) {
-                                        schedule ();
+                                    time_before(jiffies, expire)) {
+                                        schedule();
                                 }
                                 goto false_alarm;
                         }
 
                         /* Depending on how the FIFO threshold was
-                         * set, how long interrupt service took, and
-                         * how fast the peripheral is, we might be
-                         * lucky and have a just filled FIFO. */
+                         * set, how long interrupt service took, and
+                         * how fast the peripheral is, we might be
+                         * lucky and have a just filled FIFO. */
                         continue;
                 }
 
                 if (ecrval & 0x02) {
                         /* FIFO is full. */
-dump_parport_state ("FIFO full", port);
-                        insb (fifo, bufp, fifo_depth);
+dump_parport_state("FIFO full", port);
+                        insb(fifo, bufp, fifo_depth);
                         bufp += fifo_depth;
                         left -= fifo_depth;
                         continue;
                 }
 
-DPRINTK (KERN_DEBUG "*** ecp_read_block_pio: reading one byte from the FIFO\n");
+DPRINTK(KERN_DEBUG "*** ecp_read_block_pio: reading one byte from the FIFO\n");
 
                 /* FIFO not filled.  We will cycle this loop for a while
-                 * and either the peripheral will fill it faster,
-                 * tripping a fast empty with insb, or we empty it. */
-                *bufp++ = inb (fifo);
+                 * and either the peripheral will fill it faster,
+                 * tripping a fast empty with insb, or we empty it. */
+                *bufp++ = inb(fifo);
                 left--;
         }
 
         /* scoop up anything left in the FIFO */
-        while (left && !(inb (ECONTROL (port) & 0x01))) {
-                *bufp++ = inb (fifo);
+        while (left && !(inb(ECONTROL(port) & 0x01))) {
+                *bufp++ = inb(fifo);
                 left--;
         }
 
         port->ieee1284.phase = IEEE1284_PH_REV_IDLE;
-dump_parport_state ("rev idle2", port);
+dump_parport_state("rev idle2", port);
 
 out_no_data:
 
         /* Go to forward idle mode to shut the peripheral up (event 47). */
-        parport_frob_control (port, PARPORT_CONTROL_INIT, PARPORT_CONTROL_INIT);
+        parport_frob_control(port, PARPORT_CONTROL_INIT, PARPORT_CONTROL_INIT);
 
         /* event 49: PError goes high */
-        r = parport_wait_peripheral (port,
+        r = parport_wait_peripheral(port,
                                      PARPORT_STATUS_PAPEROUT,
                                      PARPORT_STATUS_PAPEROUT);
         if (r) {
-                printk (KERN_DEBUG
+                printk(KERN_DEBUG
                         "%s: PE timeout FWDIDLE (%d) in ecp_read_block_pio\n",
                         port->name, r);
         }
@@ -1141,14 +1156,14 @@ out_no_data:
 
         /* Finish up. */
         {
-                int lost = get_fifo_residue (port);
+                int lost = get_fifo_residue(port);
                 if (lost)
                         /* Shouldn't happen with compliant peripherals. */
-                        printk (KERN_DEBUG "%s: DATA LOSS (%d bytes)!\n",
+                        printk(KERN_DEBUG "%s: DATA LOSS (%d bytes)!\n",
                                 port->name, lost);
         }
 
-dump_parport_state ("fwd idle", port);
+dump_parport_state("fwd idle", port);
         return length - left;
 }
 #endif  /*  0  */
@@ -1164,8 +1179,7 @@ dump_parport_state ("fwd idle", port);
 
 /* GCC is not inlining extern inline function later overwriten to non-inline,
    so we use outlined_ variants here.  */
-static const struct parport_operations parport_pc_ops =
-{
+static const struct parport_operations parport_pc_ops = {
         .write_data     = parport_pc_write_data,
         .read_data      = parport_pc_read_data,
 
@@ -1205,46 +1219,52 @@ static const struct parport_operations parport_pc_ops =
 /* Super-IO chipset detection, Winbond, SMSC */
 static void __devinit show_parconfig_smsc37c669(int io, int key)
 {
-        int cr1,cr4,cra,cr23,cr26,cr27,i=0;
-        static const char *const modes[]={
+        int cr1, cr4, cra, cr23, cr26, cr27, i = 0;
+        static const char *const modes[] = {
                 "SPP and Bidirectional (PS/2)",
                 "EPP and SPP",
                 "ECP",
                 "ECP and EPP" };
 
-        outb(key,io);
-        outb(key,io);
-        outb(1,io);
-        cr1=inb(io+1);
-        outb(4,io);
-        cr4=inb(io+1);
-        outb(0x0a,io);
-        cra=inb(io+1);
-        outb(0x23,io);
-        cr23=inb(io+1);
-        outb(0x26,io);
-        cr26=inb(io+1);
-        outb(0x27,io);
-        cr27=inb(io+1);
-        outb(0xaa,io);
+        outb(key, io);
+        outb(key, io);
+        outb(1, io);
+        cr1 = inb(io + 1);
+        outb(4, io);
+        cr4 = inb(io + 1);
+        outb(0x0a, io);
+        cra = inb(io + 1);
+        outb(0x23, io);
+        cr23 = inb(io + 1);
+        outb(0x26, io);
+        cr26 = inb(io + 1);
+        outb(0x27, io);
+        cr27 = inb(io + 1);
+        outb(0xaa, io);
 
         if (verbose_probing) {
-                printk (KERN_INFO "SMSC 37c669 LPT Config: cr_1=0x%02x, 4=0x%02x, "
+                printk(KERN_INFO
+                        "SMSC 37c669 LPT Config: cr_1=0x%02x, 4=0x%02x, "
                         "A=0x%2x, 23=0x%02x, 26=0x%02x, 27=0x%02x\n",
-                        cr1,cr4,cra,cr23,cr26,cr27);
-                
+                        cr1, cr4, cra, cr23, cr26, cr27);
+
                 /* The documentation calls DMA and IRQ-Lines by letters, so
                    the board maker can/will wire them
                    appropriately/randomly...  G=reserved H=IDE-irq, */
-                printk (KERN_INFO "SMSC LPT Config: io=0x%04x, irq=%c, dma=%c, "
-                        "fifo threshold=%d\n", cr23*4,
-                        (cr27 &0x0f) ? 'A'-1+(cr27 &0x0f): '-',
-                        (cr26 &0x0f) ? 'A'-1+(cr26 &0x0f): '-', cra & 0x0f);
+                printk(KERN_INFO
+        "SMSC LPT Config: io=0x%04x, irq=%c, dma=%c, fifo threshold=%d\n",
+                                cr23 * 4,
+                                (cr27 & 0x0f) ? 'A' - 1 + (cr27 & 0x0f) : '-',
+                                (cr26 & 0x0f) ? 'A' - 1 + (cr26 & 0x0f) : '-',
+                                cra & 0x0f);
                 printk(KERN_INFO "SMSC LPT Config: enabled=%s power=%s\n",
-                       (cr23*4 >=0x100) ?"yes":"no", (cr1 & 4) ? "yes" : "no");
-                printk(KERN_INFO "SMSC LPT Config: Port mode=%s, EPP version =%s\n",
-                       (cr1 & 0x08 ) ? "Standard mode only (SPP)" : modes[cr4 & 0x03], 
-                       (cr4 & 0x40) ? "1.7" : "1.9");
+                       (cr23 * 4 >= 0x100) ? "yes" : "no",
+                       (cr1 & 4) ? "yes" : "no");
+                printk(KERN_INFO
+                        "SMSC LPT Config: Port mode=%s, EPP version =%s\n",
+                                (cr1 & 0x08) ? "Standard mode only (SPP)"
+                                              : modes[cr4 & 0x03],
+                                (cr4 & 0x40) ? "1.7" : "1.9");
         }
 
         /* Heuristics !  BIOS setup for this mainboard device limits
@@ -1258,32 +1278,32 @@ static void __devinit show_parconfig_smsc37c669(int io, int key)
                         printk(KERN_INFO "Super-IO: too many chips!\n");
                 } else {
                         int d;
-                        switch (cr23*4) {
-                                case 0x3bc:
-                                        superios[i].io = 0x3bc;
-                                        superios[i].irq = 7;
-                                        break;
-                                case 0x378:
-                                        superios[i].io = 0x378;
-                                        superios[i].irq = 7;
-                                        break;
-                                case 0x278:
-                                        superios[i].io = 0x278;
-                                        superios[i].irq = 5;
+                        switch (cr23 * 4) {
+                        case 0x3bc:
+                                superios[i].io = 0x3bc;
+                                superios[i].irq = 7;
+                                break;
+                        case 0x378:
+                                superios[i].io = 0x378;
+                                superios[i].irq = 7;
+                                break;
+                        case 0x278:
+                                superios[i].io = 0x278;
+                                superios[i].irq = 5;
                         }
-                        d=(cr26 &0x0f);
-                        if((d==1) || (d==3)) 
-                                superios[i].dma= d;
+                        d = (cr26 & 0x0f);
+                        if (d == 1 || d == 3)
+                                superios[i].dma = d;
                         else
-                                superios[i].dma= PARPORT_DMA_NONE;
+                                superios[i].dma = PARPORT_DMA_NONE;
                 }
-        }
+        }
 }
 
 
 static void __devinit show_parconfig_winbond(int io, int key)
 {
-        int cr30,cr60,cr61,cr70,cr74,crf0,i=0;
+        int cr30, cr60, cr61, cr70, cr74, crf0, i = 0;
         static const char *const modes[] = {
                 "Standard (SPP) and Bidirectional(PS/2)", /* 0 */
                 "EPP-1.9 and SPP",
@@ -1296,40 +1316,43 @@ static void __devinit show_parconfig_winbond(int io, int key)
         static char *const irqtypes[] = {
                 "pulsed low, high-Z",
                 "follows nACK" };
-                
+
         /* The registers are called compatible-PnP because the
-           register layout is modelled after ISA-PnP, the access
-           method is just another ... */
-        outb(key,io);
-        outb(key,io);
-        outb(0x07,io);   /* Register 7: Select Logical Device */
-        outb(0x01,io+1); /* LD1 is Parallel Port */
-        outb(0x30,io);
-        cr30=inb(io+1);
-        outb(0x60,io);
-        cr60=inb(io+1);
-        outb(0x61,io);
-        cr61=inb(io+1);
-        outb(0x70,io);
-        cr70=inb(io+1);
-        outb(0x74,io);
-        cr74=inb(io+1);
-        outb(0xf0,io);
-        crf0=inb(io+1);
-        outb(0xaa,io);
+           register layout is modelled after ISA-PnP, the access
+           method is just another ... */
+        outb(key, io);
+        outb(key, io);
+        outb(0x07, io);   /* Register 7: Select Logical Device */
+        outb(0x01, io + 1); /* LD1 is Parallel Port */
+        outb(0x30, io);
+        cr30 = inb(io + 1);
+        outb(0x60, io);
+        cr60 = inb(io + 1);
+        outb(0x61, io);
+        cr61 = inb(io + 1);
+        outb(0x70, io);
+        cr70 = inb(io + 1);
+        outb(0x74, io);
+        cr74 = inb(io + 1);
+        outb(0xf0, io);
+        crf0 = inb(io + 1);
+        outb(0xaa, io);
 
         if (verbose_probing) {
-                printk(KERN_INFO "Winbond LPT Config: cr_30=%02x 60,61=%02x%02x "
-                       "70=%02x 74=%02x, f0=%02x\n", cr30,cr60,cr61,cr70,cr74,crf0);
-                printk(KERN_INFO "Winbond LPT Config: active=%s, io=0x%02x%02x irq=%d, ", 
-                       (cr30 & 0x01) ? "yes":"no", cr60,cr61,cr70&0x0f );
+                printk(KERN_INFO
+    "Winbond LPT Config: cr_30=%02x 60,61=%02x%02x 70=%02x 74=%02x, f0=%02x\n",
+                                        cr30, cr60, cr61, cr70, cr74, crf0);
+                printk(KERN_INFO "Winbond LPT Config: active=%s, io=0x%02x%02x irq=%d, ",
+                       (cr30 & 0x01) ? "yes" : "no", cr60, cr61, cr70 & 0x0f);
                 if ((cr74 & 0x07) > 3)
                         printk("dma=none\n");
                 else
-                        printk("dma=%d\n",cr74 & 0x07);
-                printk(KERN_INFO "Winbond LPT Config: irqtype=%s, ECP fifo threshold=%d\n",
-                       irqtypes[crf0>>7], (crf0>>3)&0x0f);
-                printk(KERN_INFO "Winbond LPT Config: Port mode=%s\n", modes[crf0 & 0x07]);
+                        printk("dma=%d\n", cr74 & 0x07);
+                printk(KERN_INFO
+                    "Winbond LPT Config: irqtype=%s, ECP fifo threshold=%d\n",
+                                        irqtypes[crf0>>7], (crf0>>3)&0x0f);
+                printk(KERN_INFO "Winbond LPT Config: Port mode=%s\n",
+                                        modes[crf0 & 0x07]);
         }
 
         if (cr30 & 0x01) { /* the settings can be interrogated later ... */
@@ -1346,60 +1369,82 @@ static void __devinit show_parconfig_winbond(int io, int key)
         }
 }
 
-static void __devinit decode_winbond(int efer, int key, int devid, int devrev, int oldid)
+static void __devinit decode_winbond(int efer, int key, int devid,
+                                                        int devrev, int oldid)
 {
         const char *type = "unknown";
-        int id,progif=2;
+        int id, progif = 2;
 
         if (devid == devrev)
                 /* simple heuristics, we happened to read some
-                   non-winbond register */
+                   non-winbond register */
                 return;
 
-        id=(devid<<8) | devrev;
+        id = (devid << 8) | devrev;
 
         /* Values are from public data sheets pdf files, I can just
-           confirm 83977TF is correct :-) */
-        if      (id == 0x9771) type="83977F/AF";
-        else if (id == 0x9773) type="83977TF / SMSC 97w33x/97w34x";
-        else if (id == 0x9774) type="83977ATF";
-        else if ((id & ~0x0f) == 0x5270) type="83977CTF / SMSC 97w36x";
-        else if ((id & ~0x0f) == 0x52f0) type="83977EF / SMSC 97w35x";
-        else if ((id & ~0x0f) == 0x5210) type="83627";
-        else if ((id & ~0x0f) == 0x6010) type="83697HF";
-        else if ((oldid &0x0f ) == 0x0a) { type="83877F"; progif=1;}
-        else if ((oldid &0x0f ) == 0x0b) { type="83877AF"; progif=1;}
-        else if ((oldid &0x0f ) == 0x0c) { type="83877TF"; progif=1;}
-        else if ((oldid &0x0f ) == 0x0d) { type="83877ATF"; progif=1;}
-        else progif=0;
+           confirm 83977TF is correct :-) */
+        if (id == 0x9771)
+                type = "83977F/AF";
+        else if (id == 0x9773)
+                type = "83977TF / SMSC 97w33x/97w34x";
+        else if (id == 0x9774)
+                type = "83977ATF";
+        else if ((id & ~0x0f) == 0x5270)
+                type = "83977CTF / SMSC 97w36x";
+        else if ((id & ~0x0f) == 0x52f0)
+                type = "83977EF / SMSC 97w35x";
+        else if ((id & ~0x0f) == 0x5210)
+                type = "83627";
+        else if ((id & ~0x0f) == 0x6010)
+                type = "83697HF";
+        else if ((oldid & 0x0f) == 0x0a) {
+                type = "83877F";
+                progif = 1;
+        } else if ((oldid & 0x0f) == 0x0b) {
+                type = "83877AF";
+                progif = 1;
+        } else if ((oldid & 0x0f) == 0x0c) {
+                type = "83877TF";
+                progif = 1;
+        } else if ((oldid & 0x0f) == 0x0d) {
+                type = "83877ATF";
+                progif = 1;
+        } else
+                progif = 0;
 
         if (verbose_probing)
                 printk(KERN_INFO "Winbond chip at EFER=0x%x key=0x%02x "
-                       "devid=%02x devrev=%02x oldid=%02x type=%s\n", 
+                       "devid=%02x devrev=%02x oldid=%02x type=%s\n",
                        efer, key, devid, devrev, oldid, type);
 
         if (progif == 2)
-                show_parconfig_winbond(efer,key);
+                show_parconfig_winbond(efer, key);
 }
 
 static void __devinit decode_smsc(int efer, int key, int devid, int devrev)
 {
-        const char *type = "unknown";
+        const char *type = "unknown";
         void (*func)(int io, int key);
-        int id;
+        int id;
 
-        if (devid == devrev)
+        if (devid == devrev)
                 /* simple heuristics, we happened to read some
-                   non-smsc register */
+                   non-smsc register */
                 return;
 
-        func=NULL;
-        id=(devid<<8) | devrev;
+        func = NULL;
+        id = (devid << 8) | devrev;
 
-        if      (id==0x0302) {type="37c669"; func=show_parconfig_smsc37c669;}
-        else if (id==0x6582) type="37c665IR";
-        else if (devid==0x65) type="37c665GT";
-        else if (devid==0x66) type="37c666GT";
+        if (id == 0x0302) {
+                type = "37c669";
+                func = show_parconfig_smsc37c669;
+        } else if (id == 0x6582)
+                type = "37c665IR";
+        else if (devid == 0x65)
+                type = "37c665GT";
+        else if (devid == 0x66)
+                type = "37c666GT";
 
         if (verbose_probing)
                 printk(KERN_INFO "SMSC chip at EFER=0x%x "
@@ -1407,138 +1452,138 @@ static void __devinit decode_smsc(int efer, int key, int devid, int devrev)
                        efer, key, devid, devrev, type);
 
         if (func)
-                func(efer,key);
+                func(efer, key);
 }
 
 
 static void __devinit winbond_check(int io, int key)
 {
-        int devid,devrev,oldid,x_devid,x_devrev,x_oldid;
+        int devid, devrev, oldid, x_devid, x_devrev, x_oldid;
 
         if (!request_region(io, 3, __func__))
                 return;
 
         /* First probe without key */
-        outb(0x20,io);
-        x_devid=inb(io+1);
-        outb(0x21,io);
-        x_devrev=inb(io+1);
-        outb(0x09,io);
-        x_oldid=inb(io+1);
-
-        outb(key,io);
-        outb(key,io);     /* Write Magic Sequence to EFER, extended
-                             funtion enable register */
-        outb(0x20,io);    /* Write EFIR, extended function index register */
-        devid=inb(io+1);  /* Read EFDR, extended function data register */
-        outb(0x21,io);
-        devrev=inb(io+1);
-        outb(0x09,io);
-        oldid=inb(io+1);
-        outb(0xaa,io);    /* Magic Seal */
+        outb(0x20, io);
+        x_devid = inb(io + 1);
+        outb(0x21, io);
+        x_devrev = inb(io + 1);
+        outb(0x09, io);
+        x_oldid = inb(io + 1);
+
+        outb(key, io);
+        outb(key, io);     /* Write Magic Sequence to EFER, extended
+                              funtion enable register */
+        outb(0x20, io);    /* Write EFIR, extended function index register */
+        devid = inb(io + 1);  /* Read EFDR, extended function data register */
+        outb(0x21, io);
+        devrev = inb(io + 1);
+        outb(0x09, io);
+        oldid = inb(io + 1);
+        outb(0xaa, io);    /* Magic Seal */
 
         if ((x_devid == devid) && (x_devrev == devrev) && (x_oldid == oldid))
                 goto out; /* protection against false positives */
 
-        decode_winbond(io,key,devid,devrev,oldid);
+        decode_winbond(io, key, devid, devrev, oldid);
 out:
         release_region(io, 3);
 }
 
-static void __devinit winbond_check2(int io,int key)
+static void __devinit winbond_check2(int io, int key)
 {
-        int devid,devrev,oldid,x_devid,x_devrev,x_oldid;
+        int devid, devrev, oldid, x_devid, x_devrev, x_oldid;
 
         if (!request_region(io, 3, __func__))
                 return;
 
         /* First probe without the key */
-        outb(0x20,io+2);
-        x_devid=inb(io+2);
-        outb(0x21,io+1);
-        x_devrev=inb(io+2);
-        outb(0x09,io+1);
-        x_oldid=inb(io+2);
-
-        outb(key,io);     /* Write Magic Byte to EFER, extended
-                             funtion enable register */
-        outb(0x20,io+2);  /* Write EFIR, extended function index register */
-        devid=inb(io+2);  /* Read EFDR, extended function data register */
-        outb(0x21,io+1);
-        devrev=inb(io+2);
-        outb(0x09,io+1);
-        oldid=inb(io+2);
-        outb(0xaa,io);    /* Magic Seal */
-
-        if ((x_devid == devid) && (x_devrev == devrev) && (x_oldid == oldid))
+        outb(0x20, io + 2);
+        x_devid = inb(io + 2);
+        outb(0x21, io + 1);
+        x_devrev = inb(io + 2);
+        outb(0x09, io + 1);
+        x_oldid = inb(io + 2);
+
+        outb(key, io);     /* Write Magic Byte to EFER, extended
+                              funtion enable register */
+        outb(0x20, io + 2);  /* Write EFIR, extended function index register */
+        devid = inb(io + 2);  /* Read EFDR, extended function data register */
+        outb(0x21, io + 1);
+        devrev = inb(io + 2);
+        outb(0x09, io + 1);
+        oldid = inb(io + 2);
+        outb(0xaa, io);    /* Magic Seal */
+
+        if (x_devid == devid && x_devrev == devrev && x_oldid == oldid)
                 goto out; /* protection against false positives */
 
-        decode_winbond(io,key,devid,devrev,oldid);
+        decode_winbond(io, key, devid, devrev, oldid);
 out:
         release_region(io, 3);
 }
 
 static void __devinit smsc_check(int io, int key)
 {
-        int id,rev,oldid,oldrev,x_id,x_rev,x_oldid,x_oldrev;
+        int id, rev, oldid, oldrev, x_id, x_rev, x_oldid, x_oldrev;
 
         if (!request_region(io, 3, __func__))
                 return;
 
         /* First probe without the key */
-        outb(0x0d,io);
-        x_oldid=inb(io+1);
-        outb(0x0e,io);
-        x_oldrev=inb(io+1);
-        outb(0x20,io);
-        x_id=inb(io+1);
-        outb(0x21,io);
-        x_rev=inb(io+1);
-
-        outb(key,io);
-        outb(key,io);     /* Write Magic Sequence to EFER, extended
-                             funtion enable register */
-        outb(0x0d,io);    /* Write EFIR, extended function index register */
-        oldid=inb(io+1);  /* Read EFDR, extended function data register */
-        outb(0x0e,io);
-        oldrev=inb(io+1);
-        outb(0x20,io);
-        id=inb(io+1);
-        outb(0x21,io);
-        rev=inb(io+1);
-        outb(0xaa,io);    /* Magic Seal */
-
-        if ((x_id == id) && (x_oldrev == oldrev) &&
-            (x_oldid == oldid) && (x_rev == rev))
+        outb(0x0d, io);
+        x_oldid = inb(io + 1);
+        outb(0x0e, io);
+        x_oldrev = inb(io + 1);
+        outb(0x20, io);
+        x_id = inb(io + 1);
+        outb(0x21, io);
+        x_rev = inb(io + 1);
+
+        outb(key, io);
+        outb(key, io);     /* Write Magic Sequence to EFER, extended
+                              funtion enable register */
+        outb(0x0d, io);    /* Write EFIR, extended function index register */
+        oldid = inb(io + 1);  /* Read EFDR, extended function data register */
+        outb(0x0e, io);
+        oldrev = inb(io + 1);
+        outb(0x20, io);
+        id = inb(io + 1);
+        outb(0x21, io);
+        rev = inb(io + 1);
+        outb(0xaa, io);    /* Magic Seal */
+
+        if (x_id == id && x_oldrev == oldrev &&
+            x_oldid == oldid && x_rev == rev)
                 goto out; /* protection against false positives */
 
-        decode_smsc(io,key,oldid,oldrev);
+        decode_smsc(io, key, oldid, oldrev);
 out:
         release_region(io, 3);
 }
 
 
-static void __devinit detect_and_report_winbond (void)
-{ 
+static void __devinit detect_and_report_winbond(void)
+{
         if (verbose_probing)
                 printk(KERN_DEBUG "Winbond Super-IO detection, now testing ports 3F0,370,250,4E,2E ...\n");
-        winbond_check(0x3f0,0x87);
-        winbond_check(0x370,0x87);
-        winbond_check(0x2e ,0x87);
-        winbond_check(0x4e ,0x87);
-        winbond_check(0x3f0,0x86);
-        winbond_check2(0x250,0x88); 
-        winbond_check2(0x250,0x89);
+        winbond_check(0x3f0, 0x87);
+        winbond_check(0x370, 0x87);
+        winbond_check(0x2e , 0x87);
+        winbond_check(0x4e , 0x87);
+        winbond_check(0x3f0, 0x86);
+        winbond_check2(0x250, 0x88);
+        winbond_check2(0x250, 0x89);
 }
 
-static void __devinit detect_and_report_smsc (void)
+static void __devinit detect_and_report_smsc(void)
 {
         if (verbose_probing)
                 printk(KERN_DEBUG "SMSC Super-IO detection, now testing Ports 2F0, 370 ...\n");
-        smsc_check(0x3f0,0x55);
-        smsc_check(0x370,0x55);
-        smsc_check(0x3f0,0x44);
-        smsc_check(0x370,0x44);
+        smsc_check(0x3f0, 0x55);
+        smsc_check(0x370, 0x55);
+        smsc_check(0x3f0, 0x44);
+        smsc_check(0x370, 0x44);
 }
 
 static void __devinit detect_and_report_it87(void)
@@ -1573,7 +1618,7 @@ static void __devinit detect_and_report_it87(void)
 }
 #endif /* CONFIG_PARPORT_PC_SUPERIO */
 
-static int get_superio_dma (struct parport *p)
+static int get_superio_dma(struct parport *p)
 {
         int i = 0;
 
@@ -1584,15 +1629,15 @@ static int get_superio_dma (struct parport *p)
         return PARPORT_DMA_NONE;
 }
 
-static int get_superio_irq (struct parport *p)
+static int get_superio_irq(struct parport *p)
 {
         int i = 0;
 
-        while ((i < NR_SUPERIOS) && (superios[i].io != p->base))
-                i++;
-        if (i != NR_SUPERIOS)
-                return superios[i].irq;
-        return PARPORT_IRQ_NONE;
+        while ((i < NR_SUPERIOS) && (superios[i].io != p->base))
+                i++;
+        if (i != NR_SUPERIOS)
+                return superios[i].irq;
+        return PARPORT_IRQ_NONE;
 }
 
 
@@ -1600,9 +1645,9 @@ static int get_superio_irq (struct parport *p)
 
 /*
  * Checks for port existence, all ports support SPP MODE
- * Returns: 
+ * Returns:
  *         0           :  No parallel port at this address
- *  PARPORT_MODE_PCSPP :  SPP port detected 
+ *  PARPORT_MODE_PCSPP :  SPP port detected
  *                        (if the user specified an ioport himself,
  *                         this shall always be the case!)
  *
@@ -1612,7 +1657,7 @@ static int parport_SPP_supported(struct parport *pb)
         unsigned char r, w;
 
         /*
-         * first clear an eventually pending EPP timeout 
+         * first clear an eventually pending EPP timeout
          * I (sailer@ife.ee.ethz.ch) have an SMSC chipset
          * that does not even respond to SPP cycles if an EPP
          * timeout is pending
@@ -1621,19 +1666,19 @@ static int parport_SPP_supported(struct parport *pb)
 
         /* Do a simple read-write test to make sure the port exists. */
         w = 0xc;
-        outb (w, CONTROL (pb));
+        outb(w, CONTROL(pb));
 
         /* Is there a control register that we can read from?  Some
          * ports don't allow reads, so read_control just returns a
          * software copy. Some ports _do_ allow reads, so bypass the
          * software copy here.  In addition, some bits aren't
          * writable. */
-        r = inb (CONTROL (pb));
+        r = inb(CONTROL(pb));
         if ((r & 0xf) == w) {
                 w = 0xe;
-                outb (w, CONTROL (pb));
-                r = inb (CONTROL (pb));
-                outb (0xc, CONTROL (pb));
+                outb(w, CONTROL(pb));
+                r = inb(CONTROL(pb));
+                outb(0xc, CONTROL(pb));
                 if ((r & 0xf) == w)
                         return PARPORT_MODE_PCSPP;
         }
@@ -1641,18 +1686,18 @@ static int parport_SPP_supported(struct parport *pb)
         if (user_specified)
                 /* That didn't work, but the user thinks there's a
                  * port here. */
-                printk (KERN_INFO "parport 0x%lx (WARNING): CTR: "
+                printk(KERN_INFO "parport 0x%lx (WARNING): CTR: "
                         "wrote 0x%02x, read 0x%02x\n", pb->base, w, r);
 
         /* Try the data register.  The data lines aren't tri-stated at
          * this stage, so we expect back what we wrote. */
         w = 0xaa;
-        parport_pc_write_data (pb, w);
-        r = parport_pc_read_data (pb);
+        parport_pc_write_data(pb, w);
+        r = parport_pc_read_data(pb);
         if (r == w) {
                 w = 0x55;
-                parport_pc_write_data (pb, w);
-                r = parport_pc_read_data (pb);
+                parport_pc_write_data(pb, w);
+                r = parport_pc_read_data(pb);
                 if (r == w)
                         return PARPORT_MODE_PCSPP;
         }
@@ -1660,9 +1705,9 @@ static int parport_SPP_supported(struct parport *pb)
         if (user_specified) {
                 /* Didn't work, but the user is convinced this is the
                  * place. */
-                printk (KERN_INFO "parport 0x%lx (WARNING): DATA: "
+                printk(KERN_INFO "parport 0x%lx (WARNING): DATA: "
                         "wrote 0x%02x, read 0x%02x\n", pb->base, w, r);
-                printk (KERN_INFO "parport 0x%lx: You gave this address, "
+                printk(KERN_INFO "parport 0x%lx: You gave this address, "
                         "but there is probably no parallel port there!\n",
                         pb->base);
         }
@@ -1693,33 +1738,33 @@ static int parport_ECR_present(struct parport *pb)
         struct parport_pc_private *priv = pb->private_data;
         unsigned char r = 0xc;
 
-        outb (r, CONTROL (pb));
-        if ((inb (ECONTROL (pb)) & 0x3) == (r & 0x3)) {
-                outb (r ^ 0x2, CONTROL (pb)); /* Toggle bit 1 */
+        outb(r, CONTROL(pb));
+        if ((inb(ECONTROL(pb)) & 0x3) == (r & 0x3)) {
+                outb(r ^ 0x2, CONTROL(pb)); /* Toggle bit 1 */
 
-                r = inb (CONTROL (pb));
-                if ((inb (ECONTROL (pb)) & 0x2) == (r & 0x2))
+                r = inb(CONTROL(pb));
+                if ((inb(ECONTROL(pb)) & 0x2) == (r & 0x2))
                         goto no_reg; /* Sure that no ECR register exists */
         }
-        
-        if ((inb (ECONTROL (pb)) & 0x3 ) != 0x1)
+
+        if ((inb(ECONTROL(pb)) & 0x3) != 0x1)
                 goto no_reg;
 
-        ECR_WRITE (pb, 0x34);
-        if (inb (ECONTROL (pb)) != 0x35)
+        ECR_WRITE(pb, 0x34);
+        if (inb(ECONTROL(pb)) != 0x35)
                 goto no_reg;
 
         priv->ecr = 1;
-        outb (0xc, CONTROL (pb));
-        
+        outb(0xc, CONTROL(pb));
+
         /* Go to mode 000 */
-        frob_set_mode (pb, ECR_SPP);
+        frob_set_mode(pb, ECR_SPP);
 
         return 1;
 
  no_reg:
-        outb (0xc, CONTROL (pb));
-        return 0; 
+        outb(0xc, CONTROL(pb));
+        return 0;
 }
 
 #ifdef CONFIG_PARPORT_1284
@@ -1729,7 +1774,7 @@ static int parport_ECR_present(struct parport *pb)
  * allows us to read data from the data lines.  In theory we would get back
  * 0xff but any peripheral attached to the port may drag some or all of the
  * lines down to zero.  So if we get back anything that isn't the contents
- * of the data register we deem PS/2 support to be present. 
+ * of the data register we deem PS/2 support to be present.
  *
  * Some SPP ports have "half PS/2" ability - you can't turn off the line
  * drivers, but an external peripheral with sufficiently beefy drivers of
@@ -1737,26 +1782,28 @@ static int parport_ECR_present(struct parport *pb)
  * where they can then be read back as normal.  Ports with this property
  * and the right type of device attached are likely to fail the SPP test,
  * (as they will appear to have stuck bits) and so the fact that they might
- * be misdetected here is rather academic. 
+ * be misdetected here is rather academic.
  */
 
 static int parport_PS2_supported(struct parport *pb)
 {
         int ok = 0;
-  
+
         clear_epp_timeout(pb);
 
         /* try to tri-state the buffer */
-        parport_pc_data_reverse (pb);
-        
+        parport_pc_data_reverse(pb);
+
         parport_pc_write_data(pb, 0x55);
-        if (parport_pc_read_data(pb) != 0x55) ok++;
+        if (parport_pc_read_data(pb) != 0x55)
+                ok++;
 
         parport_pc_write_data(pb, 0xaa);
-        if (parport_pc_read_data(pb) != 0xaa) ok++;
+        if (parport_pc_read_data(pb) != 0xaa)
+                ok++;
 
         /* cancel input mode */
-        parport_pc_data_forward (pb);
+        parport_pc_data_forward(pb);
 
         if (ok) {
                 pb->modes |= PARPORT_MODE_TRISTATE;
@@ -1775,68 +1822,68 @@ static int parport_ECP_supported(struct parport *pb)
         int config, configb;
         int pword;
         struct parport_pc_private *priv = pb->private_data;
-        /* Translate ECP intrLine to ISA irq value */   
-        static const int intrline[]= { 0, 7, 9, 10, 11, 14, 15, 5 }; 
+        /* Translate ECP intrLine to ISA irq value */
+        static const int intrline[] = { 0, 7, 9, 10, 11, 14, 15, 5 };
 
         /* If there is no ECR, we have no hope of supporting ECP. */
         if (!priv->ecr)
                 return 0;
 
         /* Find out FIFO depth */
-        ECR_WRITE (pb, ECR_SPP << 5); /* Reset FIFO */
-        ECR_WRITE (pb, ECR_TST << 5); /* TEST FIFO */
-        for (i=0; i < 1024 && !(inb (ECONTROL (pb)) & 0x02); i++)
-                outb (0xaa, FIFO (pb));
+        ECR_WRITE(pb, ECR_SPP << 5); /* Reset FIFO */
+        ECR_WRITE(pb, ECR_TST << 5); /* TEST FIFO */
+        for (i = 0; i < 1024 && !(inb(ECONTROL(pb)) & 0x02); i++)
+                outb(0xaa, FIFO(pb));
 
         /*
          * Using LGS chipset it uses ECR register, but
          * it doesn't support ECP or FIFO MODE
          */
         if (i == 1024) {
-                ECR_WRITE (pb, ECR_SPP << 5);
+                ECR_WRITE(pb, ECR_SPP << 5);
                 return 0;
         }
 
         priv->fifo_depth = i;
         if (verbose_probing)
-                printk (KERN_DEBUG "0x%lx: FIFO is %d bytes\n", pb->base, i);
+                printk(KERN_DEBUG "0x%lx: FIFO is %d bytes\n", pb->base, i);
 
         /* Find out writeIntrThreshold */
-        frob_econtrol (pb, 1<<2, 1<<2);
-        frob_econtrol (pb, 1<<2, 0);
+        frob_econtrol(pb, 1<<2, 1<<2);
+        frob_econtrol(pb, 1<<2, 0);
         for (i = 1; i <= priv->fifo_depth; i++) {
-                inb (FIFO (pb));
-                udelay (50);
-                if (inb (ECONTROL (pb)) & (1<<2))
+                inb(FIFO(pb));
+                udelay(50);
+                if (inb(ECONTROL(pb)) & (1<<2))
                         break;
         }
 
         if (i <= priv->fifo_depth) {
                 if (verbose_probing)
-                        printk (KERN_DEBUG "0x%lx: writeIntrThreshold is %d\n",
+                        printk(KERN_DEBUG "0x%lx: writeIntrThreshold is %d\n",
                                 pb->base, i);
         } else
                 /* Number of bytes we know we can write if we get an
-                   interrupt. */
+                   interrupt. */
                 i = 0;
 
         priv->writeIntrThreshold = i;
 
         /* Find out readIntrThreshold */
-        frob_set_mode (pb, ECR_PS2); /* Reset FIFO and enable PS2 */
-        parport_pc_data_reverse (pb); /* Must be in PS2 mode */
-        frob_set_mode (pb, ECR_TST); /* Test FIFO */
-        frob_econtrol (pb, 1<<2, 1<<2);
-        frob_econtrol (pb, 1<<2, 0);
+        frob_set_mode(pb, ECR_PS2); /* Reset FIFO and enable PS2 */
+        parport_pc_data_reverse(pb); /* Must be in PS2 mode */
+        frob_set_mode(pb, ECR_TST); /* Test FIFO */
+        frob_econtrol(pb, 1<<2, 1<<2);
+        frob_econtrol(pb, 1<<2, 0);
         for (i = 1; i <= priv->fifo_depth; i++) {
-                outb (0xaa, FIFO (pb));
-                if (inb (ECONTROL (pb)) & (1<<2))
+                outb(0xaa, FIFO(pb));
+                if (inb(ECONTROL(pb)) & (1<<2))
                         break;
         }
 
         if (i <= priv->fifo_depth) {
                 if (verbose_probing)
-                        printk (KERN_INFO "0x%lx: readIntrThreshold is %d\n",
+                        printk(KERN_INFO "0x%lx: readIntrThreshold is %d\n",
                                 pb->base, i);
         } else
                 /* Number of bytes we can read if we get an interrupt. */
@@ -1844,23 +1891,23 @@ static int parport_ECP_supported(struct parport *pb)
 
         priv->readIntrThreshold = i;
 
-        ECR_WRITE (pb, ECR_SPP << 5); /* Reset FIFO */
-        ECR_WRITE (pb, 0xf4); /* Configuration mode */
-        config = inb (CONFIGA (pb));
+        ECR_WRITE(pb, ECR_SPP << 5); /* Reset FIFO */
+        ECR_WRITE(pb, 0xf4); /* Configuration mode */
+        config = inb(CONFIGA(pb));
         pword = (config >> 4) & 0x7;
         switch (pword) {
         case 0:
                 pword = 2;
-                printk (KERN_WARNING "0x%lx: Unsupported pword size!\n",
+                printk(KERN_WARNING "0x%lx: Unsupported pword size!\n",
                         pb->base);
                 break;
         case 2:
                 pword = 4;
-                printk (KERN_WARNING "0x%lx: Unsupported pword size!\n",
+                printk(KERN_WARNING "0x%lx: Unsupported pword size!\n",
                         pb->base);
                 break;
         default:
-                printk (KERN_WARNING "0x%lx: Unknown implementation ID\n",
+                printk(KERN_WARNING "0x%lx: Unknown implementation ID\n",
                         pb->base);
                 /* Assume 1 */
         case 1:
@@ -1869,28 +1916,29 @@ static int parport_ECP_supported(struct parport *pb)
         priv->pword = pword;
 
         if (verbose_probing) {
-                printk (KERN_DEBUG "0x%lx: PWord is %d bits\n", pb->base, 8 * pword);
-                
-                printk (KERN_DEBUG "0x%lx: Interrupts are ISA-%s\n", pb->base,
+                printk(KERN_DEBUG "0x%lx: PWord is %d bits\n",
+                        pb->base, 8 * pword);
+
+                printk(KERN_DEBUG "0x%lx: Interrupts are ISA-%s\n", pb->base,
                         config & 0x80 ? "Level" : "Pulses");
 
-                configb = inb (CONFIGB (pb));
-                printk (KERN_DEBUG "0x%lx: ECP port cfgA=0x%02x cfgB=0x%02x\n",
+                configb = inb(CONFIGB(pb));
+                printk(KERN_DEBUG "0x%lx: ECP port cfgA=0x%02x cfgB=0x%02x\n",
                         pb->base, config, configb);
-                printk (KERN_DEBUG "0x%lx: ECP settings irq=", pb->base);
-                if ((configb >>3) & 0x07)
-                        printk("%d",intrline[(configb >>3) & 0x07]);
+                printk(KERN_DEBUG "0x%lx: ECP settings irq=", pb->base);
+                if ((configb >> 3) & 0x07)
+                        printk("%d", intrline[(configb >> 3) & 0x07]);
                 else
                         printk("<none or set by other means>");
-                printk (" dma=");
-                if( (configb & 0x03 ) == 0x00)
+                printk(" dma=");
+                if ((configb & 0x03) == 0x00)
                         printk("<none or set by other means>\n");
                 else
-                        printk("%d\n",configb & 0x07);
+                        printk("%d\n", configb & 0x07);
         }
 
         /* Go back to mode 000 */
-        frob_set_mode (pb, ECR_SPP);
+        frob_set_mode(pb, ECR_SPP);
 
         return 1;
 }
@@ -1905,10 +1953,10 @@ static int parport_ECPPS2_supported(struct parport *pb)
         if (!priv->ecr)
                 return 0;
 
-        oecr = inb (ECONTROL (pb));
-        ECR_WRITE (pb, ECR_PS2 << 5);
+        oecr = inb(ECONTROL(pb));
+        ECR_WRITE(pb, ECR_PS2 << 5);
         result = parport_PS2_supported(pb);
-        ECR_WRITE (pb, oecr);
+        ECR_WRITE(pb, oecr);
         return result;
 }
 
@@ -1932,16 +1980,15 @@ static int parport_EPP_supported(struct parport *pb)
          */
 
         /* If EPP timeout bit clear then EPP available */
-        if (!clear_epp_timeout(pb)) {
+        if (!clear_epp_timeout(pb))
                 return 0;  /* No way to clear timeout */
-        }
 
         /* Check for Intel bug. */
         if (priv->ecr) {
                 unsigned char i;
                 for (i = 0x00; i < 0x80; i += 0x20) {
-                        ECR_WRITE (pb, i);
-                        if (clear_epp_timeout (pb)) {
+                        ECR_WRITE(pb, i);
+                        if (clear_epp_timeout(pb)) {
                                 /* Phony EPP in ECP. */
                                 return 0;
                         }
@@ -1965,17 +2012,16 @@ static int parport_ECPEPP_supported(struct parport *pb)
         int result;
         unsigned char oecr;
 
-        if (!priv->ecr) {
+        if (!priv->ecr)
                 return 0;
-        }
 
-        oecr = inb (ECONTROL (pb));
+        oecr = inb(ECONTROL(pb));
         /* Search for SMC style EPP+ECP mode */
-        ECR_WRITE (pb, 0x80);
-        outb (0x04, CONTROL (pb));
+        ECR_WRITE(pb, 0x80);
+        outb(0x04, CONTROL(pb));
         result = parport_EPP_supported(pb);
 
-        ECR_WRITE (pb, oecr);
+        ECR_WRITE(pb, oecr);
 
         if (result) {
                 /* Set up access functions to use ECP+EPP hardware. */
@@ -1993,11 +2039,25 @@ static int parport_ECPEPP_supported(struct parport *pb)
 /* Don't bother probing for modes we know we won't use. */
 static int __devinit parport_PS2_supported(struct parport *pb) { return 0; }
 #ifdef CONFIG_PARPORT_PC_FIFO
-static int parport_ECP_supported(struct parport *pb) { return 0; }
+static int parport_ECP_supported(struct parport *pb)
+{
+        return 0;
+}
 #endif
-static int __devinit parport_EPP_supported(struct parport *pb) { return 0; }
-static int __devinit parport_ECPEPP_supported(struct parport *pb){return 0;}
-static int __devinit parport_ECPPS2_supported(struct parport *pb){return 0;}
+static int __devinit parport_EPP_supported(struct parport *pb)
+{
+        return 0;
+}
+
+static int __devinit parport_ECPEPP_supported(struct parport *pb)
+{
+        return 0;
+}
+
+static int __devinit parport_ECPPS2_supported(struct parport *pb)
+{
+        return 0;
+}
 
 #endif /* No IEEE 1284 support */
 
@@ -2007,17 +2067,17 @@ static int __devinit parport_ECPPS2_supported(struct parport *pb){return 0;}
 static int programmable_irq_support(struct parport *pb)
 {
         int irq, intrLine;
-        unsigned char oecr = inb (ECONTROL (pb));
+        unsigned char oecr = inb(ECONTROL(pb));
         static const int lookup[8] = {
                 PARPORT_IRQ_NONE, 7, 9, 10, 11, 14, 15, 5
         };
 
-        ECR_WRITE (pb, ECR_CNF << 5); /* Configuration MODE */
+        ECR_WRITE(pb, ECR_CNF << 5); /* Configuration MODE */
 
-        intrLine = (inb (CONFIGB (pb)) >> 3) & 0x07;
+        intrLine = (inb(CONFIGB(pb)) >> 3) & 0x07;
         irq = lookup[intrLine];
 
-        ECR_WRITE (pb, oecr);
+        ECR_WRITE(pb, oecr);
         return irq;
 }
 
@@ -2027,17 +2087,17 @@ static int irq_probe_ECP(struct parport *pb)
         unsigned long irqs;
 
         irqs = probe_irq_on();
-                
-        ECR_WRITE (pb, ECR_SPP << 5); /* Reset FIFO */
-        ECR_WRITE (pb, (ECR_TST << 5) | 0x04);
-        ECR_WRITE (pb, ECR_TST << 5);
+
+        ECR_WRITE(pb, ECR_SPP << 5); /* Reset FIFO */
+        ECR_WRITE(pb, (ECR_TST << 5) | 0x04);
+        ECR_WRITE(pb, ECR_TST << 5);
 
         /* If Full FIFO sure that writeIntrThreshold is generated */
-        for (i=0; i < 1024 && !(inb (ECONTROL (pb)) & 0x02) ; i++) 
-                outb (0xaa, FIFO (pb));
-                
+        for (i = 0; i < 1024 && !(inb(ECONTROL(pb)) & 0x02) ; i++)
+                outb(0xaa, FIFO(pb));
+
         pb->irq = probe_irq_off(irqs);
-        ECR_WRITE (pb, ECR_SPP << 5);
+        ECR_WRITE(pb, ECR_SPP << 5);
 
         if (pb->irq <= 0)
                 pb->irq = PARPORT_IRQ_NONE;
@@ -2047,7 +2107,7 @@ static int irq_probe_ECP(struct parport *pb)
 
 /*
  * This detection seems that only works in National Semiconductors
- * This doesn't work in SMC, LGS, and Winbond 
+ * This doesn't work in SMC, LGS, and Winbond
  */
 static int irq_probe_EPP(struct parport *pb)
 {
@@ -2058,16 +2118,16 @@ static int irq_probe_EPP(struct parport *pb)
         unsigned char oecr;
 
         if (pb->modes & PARPORT_MODE_PCECR)
-                oecr = inb (ECONTROL (pb));
+                oecr = inb(ECONTROL(pb));
 
         irqs = probe_irq_on();
 
         if (pb->modes & PARPORT_MODE_PCECR)
-                frob_econtrol (pb, 0x10, 0x10);
-        
+                frob_econtrol(pb, 0x10, 0x10);
+
         clear_epp_timeout(pb);
-        parport_pc_frob_control (pb, 0x20, 0x20);
-        parport_pc_frob_control (pb, 0x10, 0x10);
+        parport_pc_frob_control(pb, 0x20, 0x20);
+        parport_pc_frob_control(pb, 0x10, 0x10);
         clear_epp_timeout(pb);
 
         /* Device isn't expecting an EPP read
@@ -2076,9 +2136,9 @@ static int irq_probe_EPP(struct parport *pb)
         parport_pc_read_epp(pb);
         udelay(20);
 
-        pb->irq = probe_irq_off (irqs);
+        pb->irq = probe_irq_off(irqs);
         if (pb->modes & PARPORT_MODE_PCECR)
-                ECR_WRITE (pb, oecr);
+                ECR_WRITE(pb, oecr);
         parport_pc_write_control(pb, 0xc);
 
         if (pb->irq <= 0)
@@ -2135,28 +2195,28 @@ static int parport_irq_probe(struct parport *pb)
 /* --- DMA detection -------------------------------------- */
 
 /* Only if chipset conforms to ECP ISA Interface Standard */
-static int programmable_dma_support (struct parport *p)
+static int programmable_dma_support(struct parport *p)
 {
-        unsigned char oecr = inb (ECONTROL (p));
+        unsigned char oecr = inb(ECONTROL(p));
         int dma;
 
-        frob_set_mode (p, ECR_CNF);
-        
-        dma = inb (CONFIGB(p)) & 0x07;
+        frob_set_mode(p, ECR_CNF);
+
+        dma = inb(CONFIGB(p)) & 0x07;
         /* 000: Indicates jumpered 8-bit DMA if read-only.
            100: Indicates jumpered 16-bit DMA if read-only. */
         if ((dma & 0x03) == 0)
                 dma = PARPORT_DMA_NONE;
 
-        ECR_WRITE (p, oecr);
+        ECR_WRITE(p, oecr);
         return dma;
 }
 
-static int parport_dma_probe (struct parport *p)
+static int parport_dma_probe(struct parport *p)
 {
         const struct parport_pc_private *priv = p->private_data;
-        if (priv->ecr)
-                p->dma = programmable_dma_support(p); /* ask ECP chipset first */
+        if (priv->ecr)          /* ask ECP chipset first */
+                p->dma = programmable_dma_support(p);
         if (p->dma == PARPORT_DMA_NONE) {
                 /* ask known Super-IO chips proper, although these
                    claim ECP compatible, some don't report their DMA
@@ -2214,7 +2274,7 @@ struct parport *parport_pc_probe_port(unsigned long int base,
         if (!base_res)
                 goto out4;
 
-        memcpy(ops, &parport_pc_ops, sizeof (struct parport_operations));
+        memcpy(ops, &parport_pc_ops, sizeof(struct parport_operations));
         priv->ctr = 0xc;
         priv->ctr_writable = ~0x10;
         priv->ecr = 0;
@@ -2241,7 +2301,7 @@ struct parport *parport_pc_probe_port(unsigned long int base,
                         if (!parport_EPP_supported(p))
                                 parport_ECPEPP_supported(p);
         }
-        if (!parport_SPP_supported (p))
+        if (!parport_SPP_supported(p))
                 /* No port. */
                 goto out5;
         if (priv->ecr)
@@ -2249,7 +2309,7 @@ struct parport *parport_pc_probe_port(unsigned long int base,
         else
                 parport_PS2_supported(p);
 
-        p->size = (p->modes & PARPORT_MODE_EPP)?8:3;
+        p->size = (p->modes & PARPORT_MODE_EPP) ? 8 : 3;
 
         printk(KERN_INFO "%s: PC-style at 0x%lx", p->name, p->base);
         if (p->base_hi && priv->ecr)
@@ -2273,7 +2333,7 @@ struct parport *parport_pc_probe_port(unsigned long int base,
                 }
         }
         if (p->dma == PARPORT_DMA_AUTO) /* To use DMA, giving the irq
-                                           is mandatory (see above) */
+                                           is mandatory (see above) */
                 p->dma = PARPORT_DMA_NONE;
 
 #ifdef CONFIG_PARPORT_PC_FIFO
@@ -2290,16 +2350,23 @@ struct parport *parport_pc_probe_port(unsigned long int base,
                 if (p->dma != PARPORT_DMA_NONE) {
                         printk(", dma %d", p->dma);
                         p->modes |= PARPORT_MODE_DMA;
-                }
-                else printk(", using FIFO");
-        }
-        else
+                } else
+                        printk(", using FIFO");
+        } else
                 /* We can't use the DMA channel after all. */
                 p->dma = PARPORT_DMA_NONE;
 #endif /* Allowed to use FIFO/DMA */
 
         printk(" [");
-#define printmode(x) {if(p->modes&PARPORT_MODE_##x){printk("%s%s",f?",":"",#x);f++;}}
+
+#define printmode(x) \
+        {\
+                if (p->modes & PARPORT_MODE_##x) {\
+                        printk("%s%s", f ? "," : "", #x);\
+                        f++;\
+                } \
+        }
+
         {
                 int f = 0;
                 printmode(PCSPP);
@@ -2311,10 +2378,10 @@ struct parport *parport_pc_probe_port(unsigned long int base,
         }
 #undef printmode
 #ifndef CONFIG_PARPORT_1284
-        printk ("(,...)");
+        printk("(,...)");
 #endif /* CONFIG_PARPORT_1284 */
         printk("]\n");
-        if (probedirq != PARPORT_IRQ_NONE) 
+        if (probedirq != PARPORT_IRQ_NONE)
                 printk(KERN_INFO "%s: irq %d detected\n", p->name, probedirq);
 
         /* If No ECP release the ports grabbed above. */
@@ -2330,7 +2397,7 @@ struct parport *parport_pc_probe_port(unsigned long int base,
         if (p->irq != PARPORT_IRQ_NONE) {
                 if (request_irq(p->irq, parport_irq_handler,
                                  irqflags, p->name, p)) {
-                        printk (KERN_WARNING "%s: irq %d in use, "
+                        printk(KERN_WARNING "%s: irq %d in use, "
                                 "resorting to polled operation\n",
                                 p->name, p->irq);
                         p->irq = PARPORT_IRQ_NONE;
@@ -2340,8 +2407,8 @@ struct parport *parport_pc_probe_port(unsigned long int base,
 #ifdef CONFIG_PARPORT_PC_FIFO
 #ifdef HAS_DMA
                 if (p->dma != PARPORT_DMA_NONE) {
-                        if (request_dma (p->dma, p->name)) {
-                                printk (KERN_WARNING "%s: dma %d in use, "
+                        if (request_dma(p->dma, p->name)) {
+                                printk(KERN_WARNING "%s: dma %d in use, "
                                         "resorting to PIO operation\n",
                                         p->name, p->dma);
                                 p->dma = PARPORT_DMA_NONE;
@@ -2351,8 +2418,8 @@ struct parport *parport_pc_probe_port(unsigned long int base,
                                                        PAGE_SIZE,
                                                        &priv->dma_handle,
                                                        GFP_KERNEL);
-                                if (! priv->dma_buf) {
-                                        printk (KERN_WARNING "%s: "
+                                if (!priv->dma_buf) {
+                                        printk(KERN_WARNING "%s: "
                                                 "cannot get buffer for DMA, "
                                                 "resorting to PIO operation\n",
                                                 p->name);
@@ -2371,10 +2438,10 @@ struct parport *parport_pc_probe_port(unsigned long int base,
                  * Put the ECP detected port in PS2 mode.
                  * Do this also for ports that have ECR but don't do ECP.
                  */
-                ECR_WRITE (p, 0x34);
+                ECR_WRITE(p, 0x34);
 
         parport_pc_write_data(p, 0);
-        parport_pc_data_forward (p);
+        parport_pc_data_forward(p);
 
         /* Now that we've told the sharing engine about the port, and
            found out its characteristics, let the high-level drivers
@@ -2382,7 +2449,7 @@ struct parport *parport_pc_probe_port(unsigned long int base,
         spin_lock(&ports_lock);
         list_add(&priv->list, &ports_list);
         spin_unlock(&ports_lock);
-        parport_announce_port (p);
+        parport_announce_port(p);
 
         return p;
 
@@ -2395,18 +2462,17 @@ out5:
 out4:
         parport_put_port(p);
 out3:
-        kfree (priv);
+        kfree(priv);
 out2:
-        kfree (ops);
+        kfree(ops);
 out1:
         if (pdev)
                 platform_device_unregister(pdev);
         return NULL;
 }
+EXPORT_SYMBOL(parport_pc_probe_port);
 
-EXPORT_SYMBOL (parport_pc_probe_port);
-
-void parport_pc_unregister_port (struct parport *p)
+void parport_pc_unregister_port(struct parport *p)
 {
         struct parport_pc_private *priv = p->private_data;
         struct parport_operations *ops = p->ops;
@@ -2432,17 +2498,16 @@ void parport_pc_unregister_port (struct parport *p)
                                     priv->dma_buf,
                                     priv->dma_handle);
 #endif
-        kfree (p->private_data);
+        kfree(p->private_data);
         parport_put_port(p);
-        kfree (ops); /* hope no-one cached it */
+        kfree(ops); /* hope no-one cached it */
 }
-
-EXPORT_SYMBOL (parport_pc_unregister_port);
+EXPORT_SYMBOL(parport_pc_unregister_port);
 
 #ifdef CONFIG_PCI
 
 /* ITE support maintained by Rich Liu <richliu@poorman.org> */
-static int __devinit sio_ite_8872_probe (struct pci_dev *pdev, int autoirq,
+static int __devinit sio_ite_8872_probe(struct pci_dev *pdev, int autoirq,
                                          int autodma,
                                          const struct parport_pc_via_data *via)
 {
@@ -2454,73 +2519,74 @@ static int __devinit sio_ite_8872_probe (struct pci_dev *pdev, int autoirq,
         int irq;
         int i;
 
-        DPRINTK (KERN_DEBUG "sio_ite_8872_probe()\n");
-        
-        // make sure which one chip
-        for(i = 0; i < 5; i++) {
+        DPRINTK(KERN_DEBUG "sio_ite_8872_probe()\n");
+
+        /* make sure which one chip */
+        for (i = 0; i < 5; i++) {
                 base_res = request_region(inta_addr[i], 32, "it887x");
                 if (base_res) {
                         int test;
-                        pci_write_config_dword (pdev, 0x60,
+                        pci_write_config_dword(pdev, 0x60,
                                                 0xe5000000 | inta_addr[i]);
-                        pci_write_config_dword (pdev, 0x78,
+                        pci_write_config_dword(pdev, 0x78,
                                                 0x00000000 | inta_addr[i]);
-                        test = inb (inta_addr[i]);
-                        if (test != 0xff) break;
+                        test = inb(inta_addr[i]);
+                        if (test != 0xff)
+                                break;
                         release_region(inta_addr[i], 0x8);
                 }
         }
-        if(i >= 5) {
-                printk (KERN_INFO "parport_pc: cannot find ITE8872 INTA\n");
+        if (i >= 5) {
+                printk(KERN_INFO "parport_pc: cannot find ITE8872 INTA\n");
                 return 0;
         }
 
-        type = inb (inta_addr[i] + 0x18);
+        type = inb(inta_addr[i] + 0x18);
         type &= 0x0f;
 
         switch (type) {
         case 0x2:
-                printk (KERN_INFO "parport_pc: ITE8871 found (1P)\n");
+                printk(KERN_INFO "parport_pc: ITE8871 found (1P)\n");
                 ite8872set = 0x64200000;
                 break;
         case 0xa:
-                printk (KERN_INFO "parport_pc: ITE8875 found (1P)\n");
+                printk(KERN_INFO "parport_pc: ITE8875 found (1P)\n");
                 ite8872set = 0x64200000;
                 break;
         case 0xe:
-                printk (KERN_INFO "parport_pc: ITE8872 found (2S1P)\n");
+                printk(KERN_INFO "parport_pc: ITE8872 found (2S1P)\n");
                 ite8872set = 0x64e00000;
                 break;
         case 0x6:
-                printk (KERN_INFO "parport_pc: ITE8873 found (1S)\n");
+                printk(KERN_INFO "parport_pc: ITE8873 found (1S)\n");
                 return 0;
         case 0x8:
-                DPRINTK (KERN_DEBUG "parport_pc: ITE8874 found (2S)\n");
+                DPRINTK(KERN_DEBUG "parport_pc: ITE8874 found (2S)\n");
                 return 0;
         default:
-                printk (KERN_INFO "parport_pc: unknown ITE887x\n");
-                printk (KERN_INFO "parport_pc: please mail 'lspci -nvv' "
+                printk(KERN_INFO "parport_pc: unknown ITE887x\n");
+                printk(KERN_INFO "parport_pc: please mail 'lspci -nvv' "
                         "output to Rich.Liu@ite.com.tw\n");
                 return 0;
         }
 
-        pci_read_config_byte (pdev, 0x3c, &ite8872_irq);
-        pci_read_config_dword (pdev, 0x1c, &ite8872_lpt);
+        pci_read_config_byte(pdev, 0x3c, &ite8872_irq);
+        pci_read_config_dword(pdev, 0x1c, &ite8872_lpt);
         ite8872_lpt &= 0x0000ff00;
-        pci_read_config_dword (pdev, 0x20, &ite8872_lpthi);
+        pci_read_config_dword(pdev, 0x20, &ite8872_lpthi);
         ite8872_lpthi &= 0x0000ff00;
-        pci_write_config_dword (pdev, 0x6c, 0xe3000000 | ite8872_lpt);
-        pci_write_config_dword (pdev, 0x70, 0xe3000000 | ite8872_lpthi);
-        pci_write_config_dword (pdev, 0x80, (ite8872_lpthi<<16) | ite8872_lpt);
-        // SET SPP&EPP , Parallel Port NO DMA , Enable All Function
-        // SET Parallel IRQ
-        pci_write_config_dword (pdev, 0x9c,
+        pci_write_config_dword(pdev, 0x6c, 0xe3000000 | ite8872_lpt);
+        pci_write_config_dword(pdev, 0x70, 0xe3000000 | ite8872_lpthi);
+        pci_write_config_dword(pdev, 0x80, (ite8872_lpthi<<16) | ite8872_lpt);
+        /* SET SPP&EPP , Parallel Port NO DMA , Enable All Function */
+        /* SET Parallel IRQ */
+        pci_write_config_dword(pdev, 0x9c,
                                 ite8872set | (ite8872_irq * 0x11111));
 
-        DPRINTK (KERN_DEBUG "ITE887x: The IRQ is %d.\n", ite8872_irq);
-        DPRINTK (KERN_DEBUG "ITE887x: The PARALLEL I/O port is 0x%x.\n",
+        DPRINTK(KERN_DEBUG "ITE887x: The IRQ is %d.\n", ite8872_irq);
+        DPRINTK(KERN_DEBUG "ITE887x: The PARALLEL I/O port is 0x%x.\n",
                  ite8872_lpt);
-        DPRINTK (KERN_DEBUG "ITE887x: The PARALLEL I/O porthi is 0x%x.\n",
+        DPRINTK(KERN_DEBUG "ITE887x: The PARALLEL I/O porthi is 0x%x.\n",
                  ite8872_lpthi);
 
         /* Let the user (or defaults) steer us away from interrupts */
@@ -2532,14 +2598,14 @@ static int __devinit sio_ite_8872_probe (struct pci_dev *pdev, int autoirq,
          * Release the resource so that parport_pc_probe_port can get it.
          */
         release_resource(base_res);
-        if (parport_pc_probe_port (ite8872_lpt, ite8872_lpthi,
+        if (parport_pc_probe_port(ite8872_lpt, ite8872_lpthi,
                                    irq, PARPORT_DMA_NONE, &pdev->dev, 0)) {
-                printk (KERN_INFO
+                printk(KERN_INFO
                         "parport_pc: ITE 8872 parallel port: io=0x%X",
-                        ite8872_lpt);
+                                                                ite8872_lpt);
                 if (irq != PARPORT_IRQ_NONE)
-                        printk (", irq=%d", irq);
-                printk ("\n");
+                        printk(", irq=%d", irq);
+                printk("\n");
                 return 1;
         }
 
@@ -2548,7 +2614,7 @@ static int __devinit sio_ite_8872_probe (struct pci_dev *pdev, int autoirq,
 
 /* VIA 8231 support by Pavel Fedin <sonic_amiga@rambler.ru>
    based on VIA 686a support code by Jeff Garzik <jgarzik@pobox.com> */
-static int __devinitdata parport_init_mode = 0;
+static int __devinitdata parport_init_mode;
 
 /* Data for two known VIA chips */
 static struct parport_pc_via_data via_686a_data __devinitdata = {
@@ -2570,7 +2636,7 @@ static struct parport_pc_via_data via_8231_data __devinitdata = {
         0xF6
 };
 
-static int __devinit sio_via_probe (struct pci_dev *pdev, int autoirq,
+static int __devinit sio_via_probe(struct pci_dev *pdev, int autoirq,
                                     int autodma,
                                     const struct parport_pc_via_data *via)
 {
@@ -2582,38 +2648,38 @@ static int __devinit sio_via_probe (struct pci_dev *pdev, int autoirq,
 
         printk(KERN_DEBUG "parport_pc: VIA 686A/8231 detected\n");
 
-        switch(parport_init_mode)
-        {
+        switch (parport_init_mode) {
         case 1:
-            printk(KERN_DEBUG "parport_pc: setting SPP mode\n");
-            siofunc = VIA_FUNCTION_PARPORT_SPP;
-            break;
+                printk(KERN_DEBUG "parport_pc: setting SPP mode\n");
+                siofunc = VIA_FUNCTION_PARPORT_SPP;
+                break;
         case 2:
-            printk(KERN_DEBUG "parport_pc: setting PS/2 mode\n");
-            siofunc = VIA_FUNCTION_PARPORT_SPP;
-            ppcontrol = VIA_PARPORT_BIDIR;
-            break;
+                printk(KERN_DEBUG "parport_pc: setting PS/2 mode\n");
+                siofunc = VIA_FUNCTION_PARPORT_SPP;
+                ppcontrol = VIA_PARPORT_BIDIR;
+                break;
         case 3:
-            printk(KERN_DEBUG "parport_pc: setting EPP mode\n");
-            siofunc = VIA_FUNCTION_PARPORT_EPP;
-            ppcontrol = VIA_PARPORT_BIDIR;
-            have_epp = 1;
-            break;
+                printk(KERN_DEBUG "parport_pc: setting EPP mode\n");
+                siofunc = VIA_FUNCTION_PARPORT_EPP;
+                ppcontrol = VIA_PARPORT_BIDIR;
+                have_epp = 1;
+                break;
         case 4:
-            printk(KERN_DEBUG "parport_pc: setting ECP mode\n");
-            siofunc = VIA_FUNCTION_PARPORT_ECP;
-            ppcontrol = VIA_PARPORT_BIDIR;
-            break;
+                printk(KERN_DEBUG "parport_pc: setting ECP mode\n");
+                siofunc = VIA_FUNCTION_PARPORT_ECP;
+                ppcontrol = VIA_PARPORT_BIDIR;
+                break;
         case 5:
-            printk(KERN_DEBUG "parport_pc: setting EPP+ECP mode\n");
-            siofunc = VIA_FUNCTION_PARPORT_ECP;
-            ppcontrol = VIA_PARPORT_BIDIR|VIA_PARPORT_ECPEPP;
-            have_epp = 1;
-            break;
-         default:
-            printk(KERN_DEBUG "parport_pc: probing current configuration\n");
-            siofunc = VIA_FUNCTION_PROBE;
-            break;
+                printk(KERN_DEBUG "parport_pc: setting EPP+ECP mode\n");
+                siofunc = VIA_FUNCTION_PARPORT_ECP;
+                ppcontrol = VIA_PARPORT_BIDIR|VIA_PARPORT_ECPEPP;
+                have_epp = 1;
+                break;
+        default:
+                printk(KERN_DEBUG
+                        "parport_pc: probing current configuration\n");
+                siofunc = VIA_FUNCTION_PROBE;
+                break;
         }
         /*
          * unlock super i/o configuration
@@ -2624,38 +2690,36 @@ static int __devinit sio_via_probe (struct pci_dev *pdev, int autoirq,
 
         /* Bits 1-0: Parallel Port Mode / Enable */
         outb(via->viacfg_function, VIA_CONFIG_INDEX);
-        tmp = inb (VIA_CONFIG_DATA);
+        tmp = inb(VIA_CONFIG_DATA);
         /* Bit 5: EPP+ECP enable; bit 7: PS/2 bidirectional port enable */
         outb(via->viacfg_parport_control, VIA_CONFIG_INDEX);
-        tmp2 = inb (VIA_CONFIG_DATA);
-        if (siofunc == VIA_FUNCTION_PROBE)
-        {
-            siofunc = tmp & VIA_FUNCTION_PARPORT_DISABLE;
-            ppcontrol = tmp2;
+        tmp2 = inb(VIA_CONFIG_DATA);
+        if (siofunc == VIA_FUNCTION_PROBE) {
+                siofunc = tmp & VIA_FUNCTION_PARPORT_DISABLE;
+                ppcontrol = tmp2;
+        } else {
+                tmp &= ~VIA_FUNCTION_PARPORT_DISABLE;
+                tmp |= siofunc;
+                outb(via->viacfg_function, VIA_CONFIG_INDEX);
+                outb(tmp, VIA_CONFIG_DATA);
+                tmp2 &= ~(VIA_PARPORT_BIDIR|VIA_PARPORT_ECPEPP);
+                tmp2 |= ppcontrol;
+                outb(via->viacfg_parport_control, VIA_CONFIG_INDEX);
+                outb(tmp2, VIA_CONFIG_DATA);
         }
-        else
-        {
-            tmp &= ~VIA_FUNCTION_PARPORT_DISABLE;
-            tmp |= siofunc;
-            outb(via->viacfg_function, VIA_CONFIG_INDEX);
-            outb(tmp, VIA_CONFIG_DATA);
-            tmp2 &= ~(VIA_PARPORT_BIDIR|VIA_PARPORT_ECPEPP);
-            tmp2 |= ppcontrol;
-            outb(via->viacfg_parport_control, VIA_CONFIG_INDEX);
-            outb(tmp2, VIA_CONFIG_DATA);
-        }
-        
+
         /* Parallel Port I/O Base Address, bits 9-2 */
         outb(via->viacfg_parport_base, VIA_CONFIG_INDEX);
         port1 = inb(VIA_CONFIG_DATA) << 2;
-        
-        printk (KERN_DEBUG "parport_pc: Current parallel port base: 0x%X\n",port1);
-        if ((port1 == 0x3BC) && have_epp)
-        {
-            outb(via->viacfg_parport_base, VIA_CONFIG_INDEX);
-            outb((0x378 >> 2), VIA_CONFIG_DATA);
-            printk(KERN_DEBUG "parport_pc: Parallel port base changed to 0x378\n");
-            port1 = 0x378;
+
+        printk(KERN_DEBUG "parport_pc: Current parallel port base: 0x%X\n",
+                                                                        port1);
+        if (port1 == 0x3BC && have_epp) {
+                outb(via->viacfg_parport_base, VIA_CONFIG_INDEX);
+                outb((0x378 >> 2), VIA_CONFIG_DATA);
+                printk(KERN_DEBUG
+                        "parport_pc: Parallel port base changed to 0x378\n");
+                port1 = 0x378;
         }
 
         /*
@@ -2669,36 +2733,39 @@ static int __devinit sio_via_probe (struct pci_dev *pdev, int autoirq,
                 printk(KERN_INFO "parport_pc: VIA parallel port disabled in BIOS\n");
                 return 0;
         }
-        
+
         /* Bits 7-4: PnP Routing for Parallel Port IRQ */
         pci_read_config_byte(pdev, via->via_pci_parport_irq_reg, &tmp);
         irq = ((tmp & VIA_IRQCONTROL_PARALLEL) >> 4);
 
-        if (siofunc == VIA_FUNCTION_PARPORT_ECP)
-        {
-            /* Bits 3-2: PnP Routing for Parallel Port DMA */
-            pci_read_config_byte(pdev, via->via_pci_parport_dma_reg, &tmp);
-            dma = ((tmp & VIA_DMACONTROL_PARALLEL) >> 2);
-        }
-        else
-            /* if ECP not enabled, DMA is not enabled, assumed bogus 'dma' value */
-            dma = PARPORT_DMA_NONE;
+        if (siofunc == VIA_FUNCTION_PARPORT_ECP) {
+                /* Bits 3-2: PnP Routing for Parallel Port DMA */
+                pci_read_config_byte(pdev, via->via_pci_parport_dma_reg, &tmp);
+                dma = ((tmp & VIA_DMACONTROL_PARALLEL) >> 2);
+        } else
+                /* if ECP not enabled, DMA is not enabled, assumed
+                   bogus 'dma' value */
+                dma = PARPORT_DMA_NONE;
 
         /* Let the user (or defaults) steer us away from interrupts and DMA */
         if (autoirq == PARPORT_IRQ_NONE) {
-            irq = PARPORT_IRQ_NONE;
-            dma = PARPORT_DMA_NONE;
+                irq = PARPORT_IRQ_NONE;
+                dma = PARPORT_DMA_NONE;
         }
         if (autodma == PARPORT_DMA_NONE)
-            dma = PARPORT_DMA_NONE;
+                dma = PARPORT_DMA_NONE;
 
         switch (port1) {
-        case 0x3bc: port2 = 0x7bc; break;
-        case 0x378: port2 = 0x778; break;
-        case 0x278: port2 = 0x678; break;
+        case 0x3bc:
+                port2 = 0x7bc; break;
+        case 0x378:
+                port2 = 0x778; break;
+        case 0x278:
+                port2 = 0x678; break;
         default:
-                printk(KERN_INFO "parport_pc: Weird VIA parport base 0x%X, ignoring\n",
-                        port1);
+                printk(KERN_INFO
+                        "parport_pc: Weird VIA parport base 0x%X, ignoring\n",
+                                                                        port1);
                 return 0;
         }
 
@@ -2716,17 +2783,17 @@ static int __devinit sio_via_probe (struct pci_dev *pdev, int autoirq,
         }
 
         /* finally, do the probe with values obtained */
-        if (parport_pc_probe_port (port1, port2, irq, dma, &pdev->dev, 0)) {
-                printk (KERN_INFO
+        if (parport_pc_probe_port(port1, port2, irq, dma, &pdev->dev, 0)) {
+                printk(KERN_INFO
                         "parport_pc: VIA parallel port: io=0x%X", port1);
                 if (irq != PARPORT_IRQ_NONE)
-                        printk (", irq=%d", irq);
+                        printk(", irq=%d", irq);
                 if (dma != PARPORT_DMA_NONE)
-                        printk (", dma=%d", dma);
-                printk ("\n");
+                        printk(", dma=%d", dma);
+                printk("\n");
                 return 1;
         }
-        
+
         printk(KERN_WARNING "parport_pc: Strange, can't probe VIA parallel port: io=0x%X, irq=%d, dma=%d\n",
                 port1, irq, dma);
         return 0;
@@ -2734,8 +2801,8 @@ static int __devinit sio_via_probe (struct pci_dev *pdev, int autoirq,
 
 
 enum parport_pc_sio_types {
-        sio_via_686a = 0,       /* Via VT82C686A motherboard Super I/O */
-        sio_via_8231,           /* Via VT8231 south bridge integrated Super IO */
+        sio_via_686a = 0,   /* Via VT82C686A motherboard Super I/O */
+        sio_via_8231,       /* Via VT8231 south bridge integrated Super IO */
         sio_ite_8872,
         last_sio
 };
@@ -2806,15 +2873,15 @@ enum parport_pc_pci_cards {
 };
 
 
-/* each element directly indexed from enum list, above 
+/* each element directly indexed from enum list, above
  * (but offset by last_sio) */
 static struct parport_pc_pci {
         int numports;
         struct { /* BAR (base address registers) numbers in the config
-                    space header */
+                    space header */
                 int lo;
-                int hi; /* -1 if not there, >6 for offset-method (max
-                           BAR is 6) */
+                int hi;
+                /* -1 if not there, >6 for offset-method (max BAR is 6) */
         } addr[4];
 
         /* If set, this is called immediately after pci_enable_device.
@@ -2859,7 +2926,7 @@ static struct parport_pc_pci {
         /* timedia_4018  */             { 2, { { 0, 1 }, { 2, 3 }, } },
         /* timedia_9018a */             { 2, { { 0, 1 }, { 2, 3 }, } },
                                         /* SYBA uses fixed offsets in
-                                           a 1K io window */
+                                           a 1K io window */
         /* syba_2p_epp AP138B */        { 2, { { 0, 0x078 }, { 0, 0x178 }, } },
         /* syba_1p_ecp W83787 */        { 1, { { 0, 0x078 }, } },
         /* titan_010l */                { 1, { { 3, -1 }, } },
@@ -2875,11 +2942,14 @@ static struct parport_pc_pci {
         /* oxsemi_pcie_pport */         { 1, { { 0, 1 }, } },
         /* aks_0100 */                  { 1, { { 0, -1 }, } },
         /* mobility_pp */               { 1, { { 0, 1 }, } },
-        /* netmos_9705 */               { 1, { { 0, -1 }, } }, /* untested */
-        /* netmos_9715 */               { 2, { { 0, 1 }, { 2, 3 },} }, /* untested */
-        /* netmos_9755 */               { 2, { { 0, 1 }, { 2, 3 },} }, /* untested */
-        /* netmos_9805 */               { 1, { { 0, -1 }, } }, /* untested */
-        /* netmos_9815 */               { 2, { { 0, -1 }, { 2, -1 }, } }, /* untested */
+
+        /* The netmos entries below are untested */
+        /* netmos_9705 */               { 1, { { 0, -1 }, } },
+        /* netmos_9715 */               { 2, { { 0, 1 }, { 2, 3 },} },
+        /* netmos_9755 */               { 2, { { 0, 1 }, { 2, 3 },} },
+        /* netmos_9805 */               { 1, { { 0, -1 }, } },
+        /* netmos_9815 */               { 2, { { 0, -1 }, { 2, -1 }, } },
+
         /* quatech_sppxp100 */          { 1, { { 0, 1 }, } },
 };
 
@@ -2908,7 +2978,7 @@ static const struct pci_device_id parport_pc_pci_tbl[] = {
         { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_BOCA_IOPPAR,
           PCI_ANY_ID, PCI_ANY_ID, 0, 0, boca_ioppar },
         { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050,
-          PCI_SUBVENDOR_ID_EXSYS, PCI_SUBDEVICE_ID_EXSYS_4014, 0,0, plx_9050 },
+          PCI_SUBVENDOR_ID_EXSYS, PCI_SUBDEVICE_ID_EXSYS_4014, 0, 0, plx_9050 },
         /* PCI_VENDOR_ID_TIMEDIA/SUNIX has many differing cards ...*/
         { 0x1409, 0x7168, 0x1409, 0x4078, 0, 0, timedia_4078a },
         { 0x1409, 0x7168, 0x1409, 0x4079, 0, 0, timedia_4079h },
@@ -2942,7 +3012,8 @@ static const struct pci_device_id parport_pc_pci_tbl[] = {
         { 0x9710, 0x9805, 0x1000, 0x0010, 0, 0, titan_1284p1 },
         { 0x9710, 0x9815, 0x1000, 0x0020, 0, 0, titan_1284p2 },
         /* PCI_VENDOR_ID_AVLAB/Intek21 has another bunch of cards ...*/
-        { 0x14db, 0x2120, PCI_ANY_ID, PCI_ANY_ID, 0, 0, avlab_1p}, /* AFAVLAB_TK9902 */
+        /* AFAVLAB_TK9902 */
+        { 0x14db, 0x2120, PCI_ANY_ID, PCI_ANY_ID, 0, 0, avlab_1p},
         { 0x14db, 0x2121, PCI_ANY_ID, PCI_ANY_ID, 0, 0, avlab_2p},
         { PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI952PP,
           PCI_ANY_ID, PCI_ANY_ID, 0, 0, oxsemi_952 },
@@ -2985,14 +3056,14 @@ static const struct pci_device_id parport_pc_pci_tbl[] = {
           PCI_ANY_ID, PCI_ANY_ID, 0, 0, quatech_sppxp100 },
         { 0, } /* terminate list */
 };
-MODULE_DEVICE_TABLE(pci,parport_pc_pci_tbl);
+MODULE_DEVICE_TABLE(pci, parport_pc_pci_tbl);
 
 struct pci_parport_data {
         int num;
         struct parport *ports[2];
 };
 
-static int parport_pc_pci_probe (struct pci_dev *dev,
+static int parport_pc_pci_probe(struct pci_dev *dev,
                                            const struct pci_device_id *id)
 {
         int err, count, n, i = id->driver_data;
@@ -3005,7 +3076,8 @@ static int parport_pc_pci_probe (struct pci_dev *dev,
         /* This is a PCI card */
         i -= last_sio;
         count = 0;
-        if ((err = pci_enable_device (dev)) != 0)
+        err = pci_enable_device(dev);
+        if (err)
                 return err;
 
         data = kmalloc(sizeof(struct pci_parport_data), GFP_KERNEL);
@@ -3013,7 +3085,7 @@ static int parport_pc_pci_probe (struct pci_dev *dev,
                 return -ENOMEM;
 
         if (cards[i].preinit_hook &&
-            cards[i].preinit_hook (dev, PARPORT_IRQ_NONE, PARPORT_DMA_NONE)) {
+            cards[i].preinit_hook(dev, PARPORT_IRQ_NONE, PARPORT_DMA_NONE)) {
                 kfree(data);
                 return -ENODEV;
         }
@@ -3023,25 +3095,25 @@ static int parport_pc_pci_probe (struct pci_dev *dev,
                 int hi = cards[i].addr[n].hi;
                 int irq;
                 unsigned long io_lo, io_hi;
-                io_lo = pci_resource_start (dev, lo);
+                io_lo = pci_resource_start(dev, lo);
                 io_hi = 0;
                 if ((hi >= 0) && (hi <= 6))
-                        io_hi = pci_resource_start (dev, hi);
+                        io_hi = pci_resource_start(dev, hi);
                 else if (hi > 6)
                         io_lo += hi; /* Reinterpret the meaning of
-                                        "hi" as an offset (see SYBA
-                                        def.) */
+                                        "hi" as an offset (see SYBA
+                                        def.) */
                 /* TODO: test if sharing interrupts works */
                 irq = dev->irq;
                 if (irq == IRQ_NONE) {
-                        printk (KERN_DEBUG
+                        printk(KERN_DEBUG
         "PCI parallel port detected: %04x:%04x, I/O at %#lx(%#lx)\n",
                                 parport_pc_pci_tbl[i + last_sio].vendor,
                                 parport_pc_pci_tbl[i + last_sio].device,
                                 io_lo, io_hi);
                         irq = PARPORT_IRQ_NONE;
                 } else {
-                        printk (KERN_DEBUG
+                        printk(KERN_DEBUG
         "PCI parallel port detected: %04x:%04x, I/O at %#lx(%#lx), IRQ %d\n",
                                 parport_pc_pci_tbl[i + last_sio].vendor,
                                 parport_pc_pci_tbl[i + last_sio].device,
@@ -3058,7 +3130,7 @@ static int parport_pc_pci_probe (struct pci_dev *dev,
         data->num = count;
 
         if (cards[i].postinit_hook)
-                cards[i].postinit_hook (dev, count == 0);
+                cards[i].postinit_hook(dev, count == 0);
 
         if (count) {
                 pci_set_drvdata(dev, data);
@@ -3092,7 +3164,7 @@ static struct pci_driver parport_pc_pci_driver = {
         .remove         = __devexit_p(parport_pc_pci_remove),
 };
 
-static int __init parport_pc_init_superio (int autoirq, int autodma)
+static int __init parport_pc_init_superio(int autoirq, int autodma)
 {
         const struct pci_device_id *id;
         struct pci_dev *pdev = NULL;
@@ -3103,8 +3175,9 @@ static int __init parport_pc_init_superio (int autoirq, int autodma)
                 if (id == NULL || id->driver_data >= last_sio)
                         continue;
 
-                if (parport_pc_superio_info[id->driver_data].probe
-                        (pdev, autoirq, autodma,parport_pc_superio_info[id->driver_data].via)) {
+                if (parport_pc_superio_info[id->driver_data].probe(
+                        pdev, autoirq, autodma,
+                        parport_pc_superio_info[id->driver_data].via)) {
                         ret++;
                 }
         }
@@ -3113,7 +3186,10 @@ static int __init parport_pc_init_superio (int autoirq, int autodma)
 }
 #else
 static struct pci_driver parport_pc_pci_driver;
-static int __init parport_pc_init_superio(int autoirq, int autodma) {return 0;}
+static int __init parport_pc_init_superio(int autoirq, int autodma)
+{
+        return 0;
+}
 #endif /* CONFIG_PCI */
 
 #ifdef CONFIG_PNP
@@ -3126,44 +3202,45 @@ static const struct pnp_device_id parport_pc_pnp_tbl[] = {
         { }
 };
 
-MODULE_DEVICE_TABLE(pnp,parport_pc_pnp_tbl);
+MODULE_DEVICE_TABLE(pnp, parport_pc_pnp_tbl);
 
-static int parport_pc_pnp_probe(struct pnp_dev *dev, const struct pnp_device_id *id)
+static int parport_pc_pnp_probe(struct pnp_dev *dev,
+                                                const struct pnp_device_id *id)
 {
         struct parport *pdata;
         unsigned long io_lo, io_hi;
         int dma, irq;
 
-        if (pnp_port_valid(dev,0) &&
-                !(pnp_port_flags(dev,0) & IORESOURCE_DISABLED)) {
-                io_lo = pnp_port_start(dev,0);
+        if (pnp_port_valid(dev, 0) &&
+                !(pnp_port_flags(dev, 0) & IORESOURCE_DISABLED)) {
+                io_lo = pnp_port_start(dev, 0);
         } else
                 return -EINVAL;
 
-        if (pnp_port_valid(dev,1) &&
-                !(pnp_port_flags(dev,1) & IORESOURCE_DISABLED)) {
-                io_hi = pnp_port_start(dev,1);
+        if (pnp_port_valid(dev, 1) &&
+                !(pnp_port_flags(dev, 1) & IORESOURCE_DISABLED)) {
+                io_hi = pnp_port_start(dev, 1);
         } else
                 io_hi = 0;
 
-        if (pnp_irq_valid(dev,0) &&
-                !(pnp_irq_flags(dev,0) & IORESOURCE_DISABLED)) {
-                irq = pnp_irq(dev,0);
+        if (pnp_irq_valid(dev, 0) &&
+                !(pnp_irq_flags(dev, 0) & IORESOURCE_DISABLED)) {
+                irq = pnp_irq(dev, 0);
         } else
                 irq = PARPORT_IRQ_NONE;
 
-        if (pnp_dma_valid(dev,0) &&
-                !(pnp_dma_flags(dev,0) & IORESOURCE_DISABLED)) {
-                dma = pnp_dma(dev,0);
+        if (pnp_dma_valid(dev, 0) &&
+                !(pnp_dma_flags(dev, 0) & IORESOURCE_DISABLED)) {
+                dma = pnp_dma(dev, 0);
         } else
                 dma = PARPORT_DMA_NONE;
 
         dev_info(&dev->dev, "reported by %s\n", dev->protocol->name);
-        if (!(pdata = parport_pc_probe_port(io_lo, io_hi,
-                                        irq, dma, &dev->dev, 0)))
+        pdata = parport_pc_probe_port(io_lo, io_hi, irq, dma, &dev->dev, 0);
+        if (pdata == NULL)
                 return -ENODEV;
 
-        pnp_set_drvdata(dev,pdata);
+        pnp_set_drvdata(dev, pdata);
         return 0;
 }
 
@@ -3205,7 +3282,7 @@ static struct platform_driver parport_pc_platform_driver = {
 
 /* This is called by parport_pc_find_nonpci_ports (in asm/parport.h) */
 static int __devinit __attribute__((unused))
-parport_pc_find_isa_ports (int autoirq, int autodma)
+parport_pc_find_isa_ports(int autoirq, int autodma)
 {
         int count = 0;
 
@@ -3229,7 +3306,7 @@ parport_pc_find_isa_ports (int autoirq, int autodma)
  * autoirq is PARPORT_IRQ_NONE, PARPORT_IRQ_AUTO, or PARPORT_IRQ_PROBEONLY
  * autodma is PARPORT_DMA_NONE or PARPORT_DMA_AUTO
  */
-static void __init parport_pc_find_ports (int autoirq, int autodma)
+static void __init parport_pc_find_ports(int autoirq, int autodma)
 {
         int count = 0, err;
 
@@ -3263,11 +3340,18 @@ static void __init parport_pc_find_ports (int autoirq, int autodma)
  *      syntax and keep in mind that code below is a cleaned up version.
  */
 
-static int __initdata io[PARPORT_PC_MAX_PORTS+1] = { [0 ... PARPORT_PC_MAX_PORTS] = 0 };
-static int __initdata io_hi[PARPORT_PC_MAX_PORTS+1] =
-        { [0 ... PARPORT_PC_MAX_PORTS] = PARPORT_IOHI_AUTO };
-static int __initdata dmaval[PARPORT_PC_MAX_PORTS] = { [0 ... PARPORT_PC_MAX_PORTS-1] = PARPORT_DMA_NONE };
-static int __initdata irqval[PARPORT_PC_MAX_PORTS] = { [0 ... PARPORT_PC_MAX_PORTS-1] = PARPORT_IRQ_PROBEONLY };
+static int __initdata io[PARPORT_PC_MAX_PORTS+1] = {
+        [0 ... PARPORT_PC_MAX_PORTS] = 0
+};
+static int __initdata io_hi[PARPORT_PC_MAX_PORTS+1] = {
+        [0 ... PARPORT_PC_MAX_PORTS] = PARPORT_IOHI_AUTO
+};
+static int __initdata dmaval[PARPORT_PC_MAX_PORTS] = {
+        [0 ... PARPORT_PC_MAX_PORTS-1] = PARPORT_DMA_NONE
+};
+static int __initdata irqval[PARPORT_PC_MAX_PORTS] = {
+        [0 ... PARPORT_PC_MAX_PORTS-1] = PARPORT_IRQ_PROBEONLY
+};
 
 static int __init parport_parse_param(const char *s, int *val,
                                 int automatic, int none, int nofifo)
@@ -3308,18 +3392,19 @@ static int __init parport_parse_dma(const char *dmastr, int *val)
 #ifdef CONFIG_PCI
 static int __init parport_init_mode_setup(char *str)
 {
-        printk(KERN_DEBUG "parport_pc.c: Specified parameter parport_init_mode=%s\n", str);
-
-        if (!strcmp (str, "spp"))
-                parport_init_mode=1;
-        if (!strcmp (str, "ps2"))
-                parport_init_mode=2;
-        if (!strcmp (str, "epp"))
-                parport_init_mode=3;
-        if (!strcmp (str, "ecp"))
-                parport_init_mode=4;
-        if (!strcmp (str, "ecpepp"))
-                parport_init_mode=5;
+        printk(KERN_DEBUG
+             "parport_pc.c: Specified parameter parport_init_mode=%s\n", str);
+
+        if (!strcmp(str, "spp"))
+                parport_init_mode = 1;
+        if (!strcmp(str, "ps2"))
+                parport_init_mode = 2;
+        if (!strcmp(str, "epp"))
+                parport_init_mode = 3;
+        if (!strcmp(str, "ecp"))
+                parport_init_mode = 4;
+        if (!strcmp(str, "ecpepp"))
+                parport_init_mode = 5;
         return 1;
 }
 #endif
@@ -3343,7 +3428,8 @@ module_param(verbose_probing, int, 0644);
 #endif
 #ifdef CONFIG_PCI
 static char *init_mode;
-MODULE_PARM_DESC(init_mode, "Initialise mode for VIA VT8231 port (spp, ps2, epp, ecp or ecpepp)");
+MODULE_PARM_DESC(init_mode,
+        "Initialise mode for VIA VT8231 port (spp, ps2, epp, ecp or ecpepp)");
 module_param(init_mode, charp, 0);
 #endif
 
@@ -3374,7 +3460,7 @@ static int __init parse_parport_params(void)
                                 irqval[0] = val;
                                 break;
                         default:
-                                printk (KERN_WARNING
+                                printk(KERN_WARNING
                                         "parport_pc: irq specified "
                                         "without base address.  Use 'io=' "
                                         "to specify one\n");
@@ -3387,7 +3473,7 @@ static int __init parse_parport_params(void)
                                 dmaval[0] = val;
                                 break;
                         default:
-                                printk (KERN_WARNING
+                                printk(KERN_WARNING
                                         "parport_pc: dma specified "
                                         "without base address.  Use 'io=' "
                                         "to specify one\n");
@@ -3398,7 +3484,7 @@ static int __init parse_parport_params(void)
 
 #else
 
-static int parport_setup_ptr __initdata = 0;
+static int parport_setup_ptr __initdata;
 
 /*
  * Acceptable parameters:
@@ -3409,7 +3495,7 @@ static int parport_setup_ptr __initdata = 0;
  *
  * IRQ/DMA may be numeric or 'auto' or 'none'
  */
-static int __init parport_setup (char *str)
+static int __init parport_setup(char *str)
 {
         char *endptr;
         char *sep;
@@ -3421,15 +3507,15 @@ static int __init parport_setup (char *str)
                 return 1;
         }
 
-        if (!strncmp (str, "auto", 4)) {
+        if (!strncmp(str, "auto", 4)) {
                 irqval[0] = PARPORT_IRQ_AUTO;
                 dmaval[0] = PARPORT_DMA_AUTO;
                 return 1;
         }
 
-        val = simple_strtoul (str, &endptr, 0);
+        val = simple_strtoul(str, &endptr, 0);
         if (endptr == str) {
-                printk (KERN_WARNING "parport=%s not understood\n", str);
+                printk(KERN_WARNING "parport=%s not understood\n", str);
                 return 1;
         }
 
@@ -3463,7 +3549,7 @@ static int __init parse_parport_params(void)
         return io[0] == PARPORT_DISABLE;
 }
 
-__setup ("parport=", parport_setup);
+__setup("parport=", parport_setup);
 
 /*
  * Acceptable parameters:
@@ -3471,7 +3557,7 @@ __setup ("parport=", parport_setup);
  * parport_init_mode=[spp|ps2|epp|ecp|ecpepp]
  */
 #ifdef CONFIG_PCI
-__setup("parport_init_mode=",parport_init_mode_setup);
+__setup("parport_init_mode=", parport_init_mode_setup);
 #endif
 #endif
 
@@ -3495,13 +3581,13 @@ static int __init parport_pc_init(void)
                 for (i = 0; i < PARPORT_PC_MAX_PORTS; i++) {
                         if (!io[i])
                                 break;
-                        if ((io_hi[i]) == PARPORT_IOHI_AUTO)
-                               io_hi[i] = 0x400 + io[i];
+                        if (io_hi[i] == PARPORT_IOHI_AUTO)
+                                io_hi[i] = 0x400 + io[i];
                         parport_pc_probe_port(io[i], io_hi[i],
-                                          irqval[i], dmaval[i], NULL, 0);
+                                        irqval[i], dmaval[i], NULL, 0);
                 }
         } else
-                parport_pc_find_ports (irqval[0], dmaval[0]);
+                parport_pc_find_ports(irqval[0], dmaval[0]);
 
         return 0;
 }
@@ -3509,9 +3595,9 @@ static int __init parport_pc_init(void)
 static void __exit parport_pc_exit(void)
 {
         if (pci_registered_parport)
-                pci_unregister_driver (&parport_pc_pci_driver);
+                pci_unregister_driver(&parport_pc_pci_driver);
         if (pnp_registered_parport)
-                pnp_unregister_driver (&parport_pc_pnp_driver);
+                pnp_unregister_driver(&parport_pc_pnp_driver);
         platform_driver_unregister(&parport_pc_platform_driver);
 
         while (!list_empty(&ports_list)) {