[PATCH] Remove CONFIG_PARPORT_ARC, drivers/parport/parport_arc.c

It's wasn't referenced in Makefile since at least 2.2.8, unbuildable due to
trivial typos and things like DATA_LATCH and arc_write_control() which
doesn't exist.

Adrian Bunk:
adapted the patch to unrelated context changes

Signed-off-by: Domen Puncer <domen@coderock.org>
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

1 files changed, 0 insertions, 139 deletions

diff --git a/drivers/parport/parport_arc.c b/drivers/parport/parport_arc.c
deleted file mode 100644
index b35bb4f48d62..000000000000
--- a/drivers/parport/parport_arc.c
+++ /dev/null
@@ -1,139 +0,0 @@
-/* Low-level parallel port routines for Archimedes onboard hardware
- *
- * Author: Phil Blundell <philb@gnu.org>
- */
-
-/* This driver is for the parallel port hardware found on Acorn's old
- * range of Archimedes machines.  The A5000 and newer systems have PC-style
- * I/O hardware and should use the parport_pc driver instead.
- *
- * The Acorn printer port hardware is very simple.  There is a single 8-bit
- * write-only latch for the data port and control/status bits are handled
- * with various auxilliary input and output lines.  The port is not
- * bidirectional, does not support any modes other than SPP, and has only
- * a subset of the standard printer control lines connected.
- */
-
-#include <linux/threads.h>
-#include <linux/delay.h>
-#include <linux/errno.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/kernel.h>
-#include <linux/slab.h>
-#include <linux/parport.h>
-
-#include <asm/ptrace.h>
-#include <asm/io.h>
-#include <asm/arch/oldlatches.h>
-#include <asm/arch/irqs.h>
-
-#define DATA_ADDRESS    0x3350010
-
-/* This is equivalent to the above and only used for request_region. */
-#define PORT_BASE       0x80000000 | ((DATA_ADDRESS - IO_BASE) >> 2)
-
-/* The hardware can't read from the data latch, so we must use a soft
-   copy. */
-static unsigned char data_copy;
-
-/* These are pretty simple. We know the irq is never shared and the
-   kernel does all the magic that's required. */
-static void arc_enable_irq(struct parport *p)
-{
-        enable_irq(p->irq);
-}
-
-static void arc_disable_irq(struct parport *p)
-{
-        disable_irq(p->irq);
-}
-
-static void arc_interrupt(int irq, void *dev_id, struct pt_regs *regs)
-{
-        parport_generic_irq(irq, (struct parport *) dev_id, regs);
-}
-
-static void arc_write_data(struct parport *p, unsigned char data)
-{
-        data_copy = data;
-        outb_t(data, DATA_LATCH);
-}
-
-static unsigned char arc_read_data(struct parport *p)
-{
-        return data_copy;
-}
-
-static struct parport_operations parport_arc_ops = 
-{
-        .write_data     = arc_write_data,
-        .read_data      = arc_read_data,
-
-        .write_control  = arc_write_control,
-        .read_control   = arc_read_control,
-        .frob_control   = arc_frob_control,
-
-        .read_status    = arc_read_status,
-
-        .enable_irq     = arc_enable_irq,
-        .disable_irq    = arc_disable_irq,
-
-        .data_forward   = arc_data_forward,
-        .data_reverse   = arc_data_reverse,
-
-        .init_state     = arc_init_state,
-        .save_state     = arc_save_state,
-        .restore_state  = arc_restore_state,
-
-        .epp_write_data = parport_ieee1284_epp_write_data,
-        .epp_read_data  = parport_ieee1284_epp_read_data,
-        .epp_write_addr = parport_ieee1284_epp_write_addr,
-        .epp_read_addr  = parport_ieee1284_epp_read_addr,
-
-        .ecp_write_data = parport_ieee1284_ecp_write_data,
-        .ecp_read_data  = parport_ieee1284_ecp_read_data,
-        .ecp_write_addr = parport_ieee1284_ecp_write_addr,
-        
-        .compat_write_data      = parport_ieee1284_write_compat,
-        .nibble_read_data       = parport_ieee1284_read_nibble,
-        .byte_read_data         = parport_ieee1284_read_byte,
-
-        .owner          = THIS_MODULE,
-};
-
-/* --- Initialisation code -------------------------------- */
-
-static int parport_arc_init(void)
-{
-        /* Archimedes hardware provides only one port, at a fixed address */
-        struct parport *p;
-        struct resource res;
-        char *fake_name = "parport probe");
-
-        res = request_region(PORT_BASE, 1, fake_name);
-        if (res == NULL)
-                return 0;
-
-        p = parport_register_port (PORT_BASE, IRQ_PRINTERACK,
-                                   PARPORT_DMA_NONE, &parport_arc_ops);
-
-        if (!p) {
-                release_region(PORT_BASE, 1);
-                return 0;
-        }
-
-        p->modes = PARPORT_MODE_ARCSPP;
-        p->size = 1;
-        rename_region(res, p->name);
-
-        printk(KERN_INFO "%s: Archimedes on-board port, using irq %d\n",
-               p->irq);
-
-        /* Tell the high-level drivers about the port. */
-        parport_announce_port (p);
-
-        return 1;
-}
-
-module_init(parport_arc_init)