[PARISC] Move LBA and SBA register defines to the common ropes.h

header. This will allow the use of more constants in the
agpgart driver.

Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>

2 files changed, 1 insertions, 161 deletions

diff --git a/drivers/parisc/lba_pci.c b/drivers/parisc/lba_pci.c
index 98f03686a710..ba6769934c77 100644
--- a/drivers/parisc/lba_pci.c
+++ b/drivers/parisc/lba_pci.c
@@ -100,71 +100,6 @@
 
 #define MODULE_NAME "LBA"
 
-#define LBA_FUNC_ID     0x0000  /* function id */
-#define LBA_FCLASS      0x0008  /* function class, bist, header, rev... */
-#define LBA_CAPABLE     0x0030  /* capabilities register */
-
-#define LBA_PCI_CFG_ADDR        0x0040  /* poke CFG address here */
-#define LBA_PCI_CFG_DATA        0x0048  /* read or write data here */
-
-#define LBA_PMC_MTLT    0x0050  /* Firmware sets this - read only. */
-#define LBA_FW_SCRATCH  0x0058  /* Firmware writes the PCI bus number here. */
-#define LBA_ERROR_ADDR  0x0070  /* On error, address gets logged here */
-
-#define LBA_ARB_MASK    0x0080  /* bit 0 enable arbitration. PAT/PDC enables */
-#define LBA_ARB_PRI     0x0088  /* firmware sets this. */
-#define LBA_ARB_MODE    0x0090  /* firmware sets this. */
-#define LBA_ARB_MTLT    0x0098  /* firmware sets this. */
-
-#define LBA_MOD_ID      0x0100  /* Module ID. PDC_PAT_CELL reports 4 */
-
-#define LBA_STAT_CTL    0x0108  /* Status & Control */
-#define   LBA_BUS_RESET         0x01    /*  Deassert PCI Bus Reset Signal */
-#define   CLEAR_ERRLOG          0x10    /*  "Clear Error Log" cmd */
-#define   CLEAR_ERRLOG_ENABLE   0x20    /*  "Clear Error Log" Enable */
-#define   HF_ENABLE     0x40    /*    enable HF mode (default is -1 mode) */
-
-#define LBA_LMMIO_BASE  0x0200  /* < 4GB I/O address range */
-#define LBA_LMMIO_MASK  0x0208
-
-#define LBA_GMMIO_BASE  0x0210  /* > 4GB I/O address range */
-#define LBA_GMMIO_MASK  0x0218
-
-#define LBA_WLMMIO_BASE 0x0220  /* All < 4GB ranges under the same *SBA* */
-#define LBA_WLMMIO_MASK 0x0228
-
-#define LBA_WGMMIO_BASE 0x0230  /* All > 4GB ranges under the same *SBA* */
-#define LBA_WGMMIO_MASK 0x0238
-
-#define LBA_IOS_BASE    0x0240  /* I/O port space for this LBA */
-#define LBA_IOS_MASK    0x0248
-
-#define LBA_ELMMIO_BASE 0x0250  /* Extra LMMIO range */
-#define LBA_ELMMIO_MASK 0x0258
-
-#define LBA_EIOS_BASE   0x0260  /* Extra I/O port space */
-#define LBA_EIOS_MASK   0x0268
-
-#define LBA_GLOBAL_MASK 0x0270  /* Mercury only: Global Address Mask */
-#define LBA_DMA_CTL     0x0278  /* firmware sets this */
-
-#define LBA_IBASE       0x0300  /* SBA DMA support */
-#define LBA_IMASK       0x0308
-
-/* FIXME: ignore DMA Hint stuff until we can measure performance */
-#define LBA_HINT_CFG    0x0310
-#define LBA_HINT_BASE   0x0380  /* 14 registers at every 8 bytes. */
-
-#define LBA_BUS_MODE    0x0620
-
-/* ERROR regs are needed for config cycle kluges */
-#define LBA_ERROR_CONFIG 0x0680
-#define     LBA_SMART_MODE 0x20
-#define LBA_ERROR_STATUS 0x0688
-#define LBA_ROPE_CTL     0x06A0
-
-#define LBA_IOSAPIC_BASE        0x800 /* Offset of IRQ logic */
-
 /* non-postable I/O port space, densely packed */
 #define LBA_PORT_BASE   (PCI_F_EXTEND | 0xfee00000UL)
 static void __iomem *astro_iop_base __read_mostly;
diff --git a/drivers/parisc/sba_iommu.c b/drivers/parisc/sba_iommu.c
index 12776b7e3a84..eed99bdcfb6b 100644
--- a/drivers/parisc/sba_iommu.c
+++ b/drivers/parisc/sba_iommu.c
@@ -89,101 +89,6 @@
 
 #define DEFAULT_DMA_HINT_REG    0
 
-#define SBA_FUNC_ID     0x0000  /* function id */
-#define SBA_FCLASS      0x0008  /* function class, bist, header, rev... */
-
-#define SBA_FUNC_SIZE 4096   /* SBA configuration function reg set */
-
-#define ASTRO_IOC_OFFSET        (32 * SBA_FUNC_SIZE)
-#define PLUTO_IOC_OFFSET        (1 * SBA_FUNC_SIZE)
-/* Ike's IOC's occupy functions 2 and 3 */
-#define IKE_IOC_OFFSET(p)       ((p+2) * SBA_FUNC_SIZE)
-
-#define IOC_CTRL          0x8   /* IOC_CTRL offset */
-#define IOC_CTRL_TC       (1 << 0) /* TOC Enable */
-#define IOC_CTRL_CE       (1 << 1) /* Coalesce Enable */
-#define IOC_CTRL_DE       (1 << 2) /* Dillon Enable */
-#define IOC_CTRL_RM       (1 << 8) /* Real Mode */
-#define IOC_CTRL_NC       (1 << 9) /* Non Coherent Mode */
-#define IOC_CTRL_D4       (1 << 11) /* Disable 4-byte coalescing */
-#define IOC_CTRL_DD       (1 << 13) /* Disable distr. LMMIO range coalescing */
-
-
-/*
-** Offsets into MBIB (Function 0 on Ike and hopefully Astro)
-** Firmware programs this stuff. Don't touch it.
-*/
-#define LMMIO_DIRECT0_BASE  0x300
-#define LMMIO_DIRECT0_MASK  0x308
-#define LMMIO_DIRECT0_ROUTE 0x310
-
-#define LMMIO_DIST_BASE  0x360
-#define LMMIO_DIST_MASK  0x368
-#define LMMIO_DIST_ROUTE 0x370
-
-#define IOS_DIST_BASE   0x390
-#define IOS_DIST_MASK   0x398
-#define IOS_DIST_ROUTE  0x3A0
-
-#define IOS_DIRECT_BASE 0x3C0
-#define IOS_DIRECT_MASK 0x3C8
-#define IOS_DIRECT_ROUTE 0x3D0
-
-/*
-** Offsets into I/O TLB (Function 2 and 3 on Ike)
-*/
-#define ROPE0_CTL       0x200  /* "regbus pci0" */
-#define ROPE1_CTL       0x208
-#define ROPE2_CTL       0x210
-#define ROPE3_CTL       0x218
-#define ROPE4_CTL       0x220
-#define ROPE5_CTL       0x228
-#define ROPE6_CTL       0x230
-#define ROPE7_CTL       0x238
-
-#define IOC_ROPE0_CFG   0x500   /* pluto only */
-#define   IOC_ROPE_AO     0x10  /* Allow "Relaxed Ordering" */
-
-
-
-#define HF_ENABLE       0x40
-
-
-#define IOC_IBASE       0x300   /* IO TLB */
-#define IOC_IMASK       0x308
-#define IOC_PCOM        0x310
-#define IOC_TCNFG       0x318
-#define IOC_PDIR_BASE   0x320
-
-
-/*
-** IOC supports 4/8/16/64KB page sizes (see TCNFG register)
-** It's safer (avoid memory corruption) to keep DMA page mappings
-** equivalently sized to VM PAGE_SIZE.
-**
-** We really can't avoid generating a new mapping for each
-** page since the Virtual Coherence Index has to be generated
-** and updated for each page.
-**
-** PAGE_SIZE could be greater than IOVP_SIZE. But not the inverse.
-*/
-#define IOVP_SIZE       PAGE_SIZE
-#define IOVP_SHIFT      PAGE_SHIFT
-#define IOVP_MASK       PAGE_MASK
-
-#define SBA_PERF_CFG    0x708   /* Performance Counter stuff */
-#define SBA_PERF_MASK1  0x718
-#define SBA_PERF_MASK2  0x730
-
-
-/*
-** Offsets into PCI Performance Counters (functions 12 and 13)
-** Controlled by PERF registers in function 2 & 3 respectively.
-*/
-#define SBA_PERF_CNT1   0x200
-#define SBA_PERF_CNT2   0x208
-#define SBA_PERF_CNT3   0x210
-
 static struct sba_device *sba_list;
 
 static unsigned long ioc_needs_fdc = 0;
@@ -638,7 +543,7 @@ sba_io_pdir_entry(u64 *pdir_ptr, space_t sid, unsigned long vba,
         asm("lci 0(%%sr1, %1), %0" : "=r" (ci) : "r" (vba));
         pa |= (ci >> 12) & 0xff;  /* move CI (8 bits) into lowest byte */
 
-        pa |= 0x8000000000000000ULL;    /* set "valid" bit */
+        pa |= SBA_PDIR_VALID_BIT;       /* set "valid" bit */
         *pdir_ptr = cpu_to_le64(pa);    /* swap and store into I/O Pdir */
 
         /*