[PARISC] Move LBA and SBA register defines to the common ropes.h

header. This will allow the use of more constants in the
agpgart driver.

Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>

1 files changed, 0 insertions, 65 deletions

diff --git a/drivers/parisc/lba_pci.c b/drivers/parisc/lba_pci.c
index 98f03686a710..ba6769934c77 100644
--- a/drivers/parisc/lba_pci.c
+++ b/drivers/parisc/lba_pci.c
@@ -100,71 +100,6 @@
 
 #define MODULE_NAME "LBA"
 
-#define LBA_FUNC_ID     0x0000  /* function id */
-#define LBA_FCLASS      0x0008  /* function class, bist, header, rev... */
-#define LBA_CAPABLE     0x0030  /* capabilities register */
-
-#define LBA_PCI_CFG_ADDR        0x0040  /* poke CFG address here */
-#define LBA_PCI_CFG_DATA        0x0048  /* read or write data here */
-
-#define LBA_PMC_MTLT    0x0050  /* Firmware sets this - read only. */
-#define LBA_FW_SCRATCH  0x0058  /* Firmware writes the PCI bus number here. */
-#define LBA_ERROR_ADDR  0x0070  /* On error, address gets logged here */
-
-#define LBA_ARB_MASK    0x0080  /* bit 0 enable arbitration. PAT/PDC enables */
-#define LBA_ARB_PRI     0x0088  /* firmware sets this. */
-#define LBA_ARB_MODE    0x0090  /* firmware sets this. */
-#define LBA_ARB_MTLT    0x0098  /* firmware sets this. */
-
-#define LBA_MOD_ID      0x0100  /* Module ID. PDC_PAT_CELL reports 4 */
-
-#define LBA_STAT_CTL    0x0108  /* Status & Control */
-#define   LBA_BUS_RESET         0x01    /*  Deassert PCI Bus Reset Signal */
-#define   CLEAR_ERRLOG          0x10    /*  "Clear Error Log" cmd */
-#define   CLEAR_ERRLOG_ENABLE   0x20    /*  "Clear Error Log" Enable */
-#define   HF_ENABLE     0x40    /*    enable HF mode (default is -1 mode) */
-
-#define LBA_LMMIO_BASE  0x0200  /* < 4GB I/O address range */
-#define LBA_LMMIO_MASK  0x0208
-
-#define LBA_GMMIO_BASE  0x0210  /* > 4GB I/O address range */
-#define LBA_GMMIO_MASK  0x0218
-
-#define LBA_WLMMIO_BASE 0x0220  /* All < 4GB ranges under the same *SBA* */
-#define LBA_WLMMIO_MASK 0x0228
-
-#define LBA_WGMMIO_BASE 0x0230  /* All > 4GB ranges under the same *SBA* */
-#define LBA_WGMMIO_MASK 0x0238
-
-#define LBA_IOS_BASE    0x0240  /* I/O port space for this LBA */
-#define LBA_IOS_MASK    0x0248
-
-#define LBA_ELMMIO_BASE 0x0250  /* Extra LMMIO range */
-#define LBA_ELMMIO_MASK 0x0258
-
-#define LBA_EIOS_BASE   0x0260  /* Extra I/O port space */
-#define LBA_EIOS_MASK   0x0268
-
-#define LBA_GLOBAL_MASK 0x0270  /* Mercury only: Global Address Mask */
-#define LBA_DMA_CTL     0x0278  /* firmware sets this */
-
-#define LBA_IBASE       0x0300  /* SBA DMA support */
-#define LBA_IMASK       0x0308
-
-/* FIXME: ignore DMA Hint stuff until we can measure performance */
-#define LBA_HINT_CFG    0x0310
-#define LBA_HINT_BASE   0x0380  /* 14 registers at every 8 bytes. */
-
-#define LBA_BUS_MODE    0x0620
-
-/* ERROR regs are needed for config cycle kluges */
-#define LBA_ERROR_CONFIG 0x0680
-#define     LBA_SMART_MODE 0x20
-#define LBA_ERROR_STATUS 0x0688
-#define LBA_ROPE_CTL     0x06A0
-
-#define LBA_IOSAPIC_BASE        0x800 /* Offset of IRQ logic */
-
 /* non-postable I/O port space, densely packed */
 #define LBA_PORT_BASE   (PCI_F_EXTEND | 0xfee00000UL)
 static void __iomem *astro_iop_base __read_mostly;