aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/parisc/iosapic.c
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@ppc970.osdl.org>2005-04-16 18:20:36 -0400
committerLinus Torvalds <torvalds@ppc970.osdl.org>2005-04-16 18:20:36 -0400
commit1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 (patch)
tree0bba044c4ce775e45a88a51686b5d9f90697ea9d /drivers/parisc/iosapic.c
Linux-2.6.12-rc2v2.6.12-rc2
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
Diffstat (limited to 'drivers/parisc/iosapic.c')
-rw-r--r--drivers/parisc/iosapic.c921
1 files changed, 921 insertions, 0 deletions
diff --git a/drivers/parisc/iosapic.c b/drivers/parisc/iosapic.c
new file mode 100644
index 000000000000..91df0bf181dd
--- /dev/null
+++ b/drivers/parisc/iosapic.c
@@ -0,0 +1,921 @@
1/*
2** I/O Sapic Driver - PCI interrupt line support
3**
4** (c) Copyright 1999 Grant Grundler
5** (c) Copyright 1999 Hewlett-Packard Company
6**
7** This program is free software; you can redistribute it and/or modify
8** it under the terms of the GNU General Public License as published by
9** the Free Software Foundation; either version 2 of the License, or
10** (at your option) any later version.
11**
12** The I/O sapic driver manages the Interrupt Redirection Table which is
13** the control logic to convert PCI line based interrupts into a Message
14** Signaled Interrupt (aka Transaction Based Interrupt, TBI).
15**
16** Acronyms
17** --------
18** HPA Hard Physical Address (aka MMIO address)
19** IRQ Interrupt ReQuest. Implies Line based interrupt.
20** IRT Interrupt Routing Table (provided by PAT firmware)
21** IRdT Interrupt Redirection Table. IRQ line to TXN ADDR/DATA
22** table which is implemented in I/O SAPIC.
23** ISR Interrupt Service Routine. aka Interrupt handler.
24** MSI Message Signaled Interrupt. PCI 2.2 functionality.
25** aka Transaction Based Interrupt (or TBI).
26** PA Precision Architecture. HP's RISC architecture.
27** RISC Reduced Instruction Set Computer.
28**
29**
30** What's a Message Signalled Interrupt?
31** -------------------------------------
32** MSI is a write transaction which targets a processor and is similar
33** to a processor write to memory or MMIO. MSIs can be generated by I/O
34** devices as well as processors and require *architecture* to work.
35**
36** PA only supports MSI. So I/O subsystems must either natively generate
37** MSIs (e.g. GSC or HP-PB) or convert line based interrupts into MSIs
38** (e.g. PCI and EISA). IA64 supports MSIs via a "local SAPIC" which
39** acts on behalf of a processor.
40**
41** MSI allows any I/O device to interrupt any processor. This makes
42** load balancing of the interrupt processing possible on an SMP platform.
43** Interrupts are also ordered WRT to DMA data. It's possible on I/O
44** coherent systems to completely eliminate PIO reads from the interrupt
45** path. The device and driver must be designed and implemented to
46** guarantee all DMA has been issued (issues about atomicity here)
47** before the MSI is issued. I/O status can then safely be read from
48** DMA'd data by the ISR.
49**
50**
51** PA Firmware
52** -----------
53** PA-RISC platforms have two fundementally different types of firmware.
54** For PCI devices, "Legacy" PDC initializes the "INTERRUPT_LINE" register
55** and BARs similar to a traditional PC BIOS.
56** The newer "PAT" firmware supports PDC calls which return tables.
57** PAT firmware only initializes PCI Console and Boot interface.
58** With these tables, the OS can progam all other PCI devices.
59**
60** One such PAT PDC call returns the "Interrupt Routing Table" (IRT).
61** The IRT maps each PCI slot's INTA-D "output" line to an I/O SAPIC
62** input line. If the IRT is not available, this driver assumes
63** INTERRUPT_LINE register has been programmed by firmware. The latter
64** case also means online addition of PCI cards can NOT be supported
65** even if HW support is present.
66**
67** All platforms with PAT firmware to date (Oct 1999) use one Interrupt
68** Routing Table for the entire platform.
69**
70** Where's the iosapic?
71** --------------------
72** I/O sapic is part of the "Core Electronics Complex". And on HP platforms
73** it's integrated as part of the PCI bus adapter, "lba". So no bus walk
74** will discover I/O Sapic. I/O Sapic driver learns about each device
75** when lba driver advertises the presence of the I/O sapic by calling
76** iosapic_register().
77**
78**
79** IRQ handling notes
80** ------------------
81** The IO-SAPIC can indicate to the CPU which interrupt was asserted.
82** So, unlike the GSC-ASIC and Dino, we allocate one CPU interrupt per
83** IO-SAPIC interrupt and call the device driver's handler directly.
84** The IO-SAPIC driver hijacks the CPU interrupt handler so it can
85** issue the End Of Interrupt command to the IO-SAPIC.
86**
87** Overview of exported iosapic functions
88** --------------------------------------
89** (caveat: code isn't finished yet - this is just the plan)
90**
91** iosapic_init:
92** o initialize globals (lock, etc)
93** o try to read IRT. Presence of IRT determines if this is
94** a PAT platform or not.
95**
96** iosapic_register():
97** o create iosapic_info instance data structure
98** o allocate vector_info array for this iosapic
99** o initialize vector_info - read corresponding IRdT?
100**
101** iosapic_xlate_pin: (only called by fixup_irq for PAT platform)
102** o intr_pin = read cfg (INTERRUPT_PIN);
103** o if (device under PCI-PCI bridge)
104** translate slot/pin
105**
106** iosapic_fixup_irq:
107** o if PAT platform (IRT present)
108** intr_pin = iosapic_xlate_pin(isi,pcidev):
109** intr_line = find IRT entry(isi, PCI_SLOT(pcidev), intr_pin)
110** save IRT entry into vector_info later
111** write cfg INTERRUPT_LINE (with intr_line)?
112** else
113** intr_line = pcidev->irq
114** IRT pointer = NULL
115** endif
116** o locate vector_info (needs: isi, intr_line)
117** o allocate processor "irq" and get txn_addr/data
118** o request_irq(processor_irq, iosapic_interrupt, vector_info,...)
119**
120** iosapic_enable_irq:
121** o clear any pending IRQ on that line
122** o enable IRdT - call enable_irq(vector[line]->processor_irq)
123** o write EOI in case line is already asserted.
124**
125** iosapic_disable_irq:
126** o disable IRdT - call disable_irq(vector[line]->processor_irq)
127*/
128
129
130/* FIXME: determine which include files are really needed */
131#include <linux/types.h>
132#include <linux/kernel.h>
133#include <linux/spinlock.h>
134#include <linux/pci.h>
135#include <linux/init.h>
136#include <linux/slab.h>
137#include <linux/interrupt.h>
138
139#include <asm/byteorder.h> /* get in-line asm for swab */
140#include <asm/pdc.h>
141#include <asm/pdcpat.h>
142#include <asm/page.h>
143#include <asm/system.h>
144#include <asm/io.h> /* read/write functions */
145#ifdef CONFIG_SUPERIO
146#include <asm/superio.h>
147#endif
148
149#include <asm/iosapic.h>
150#include "./iosapic_private.h"
151
152#define MODULE_NAME "iosapic"
153
154/* "local" compile flags */
155#undef PCI_BRIDGE_FUNCS
156#undef DEBUG_IOSAPIC
157#undef DEBUG_IOSAPIC_IRT
158
159
160#ifdef DEBUG_IOSAPIC
161#define DBG(x...) printk(x)
162#else /* DEBUG_IOSAPIC */
163#define DBG(x...)
164#endif /* DEBUG_IOSAPIC */
165
166#ifdef DEBUG_IOSAPIC_IRT
167#define DBG_IRT(x...) printk(x)
168#else
169#define DBG_IRT(x...)
170#endif
171
172#ifdef CONFIG_64BIT
173#define COMPARE_IRTE_ADDR(irte, hpa) ((irte)->dest_iosapic_addr == (hpa))
174#else
175#define COMPARE_IRTE_ADDR(irte, hpa) \
176 ((irte)->dest_iosapic_addr == ((hpa) | 0xffffffff00000000ULL))
177#endif
178
179#define IOSAPIC_REG_SELECT 0x00
180#define IOSAPIC_REG_WINDOW 0x10
181#define IOSAPIC_REG_EOI 0x40
182
183#define IOSAPIC_REG_VERSION 0x1
184
185#define IOSAPIC_IRDT_ENTRY(idx) (0x10+(idx)*2)
186#define IOSAPIC_IRDT_ENTRY_HI(idx) (0x11+(idx)*2)
187
188static inline unsigned int iosapic_read(void __iomem *iosapic, unsigned int reg)
189{
190 writel(reg, iosapic + IOSAPIC_REG_SELECT);
191 return readl(iosapic + IOSAPIC_REG_WINDOW);
192}
193
194static inline void iosapic_write(void __iomem *iosapic, unsigned int reg, u32 val)
195{
196 writel(reg, iosapic + IOSAPIC_REG_SELECT);
197 writel(val, iosapic + IOSAPIC_REG_WINDOW);
198}
199
200#define IOSAPIC_VERSION_MASK 0x000000ff
201#define IOSAPIC_VERSION(ver) ((int) (ver & IOSAPIC_VERSION_MASK))
202
203#define IOSAPIC_MAX_ENTRY_MASK 0x00ff0000
204#define IOSAPIC_MAX_ENTRY_SHIFT 0x10
205#define IOSAPIC_IRDT_MAX_ENTRY(ver) \
206 (int) (((ver) & IOSAPIC_MAX_ENTRY_MASK) >> IOSAPIC_MAX_ENTRY_SHIFT)
207
208/* bits in the "low" I/O Sapic IRdT entry */
209#define IOSAPIC_IRDT_ENABLE 0x10000
210#define IOSAPIC_IRDT_PO_LOW 0x02000
211#define IOSAPIC_IRDT_LEVEL_TRIG 0x08000
212#define IOSAPIC_IRDT_MODE_LPRI 0x00100
213
214/* bits in the "high" I/O Sapic IRdT entry */
215#define IOSAPIC_IRDT_ID_EID_SHIFT 0x10
216
217
218static spinlock_t iosapic_lock = SPIN_LOCK_UNLOCKED;
219
220static inline void iosapic_eoi(void __iomem *addr, unsigned int data)
221{
222 __raw_writel(data, addr);
223}
224
225/*
226** REVISIT: future platforms may have more than one IRT.
227** If so, the following three fields form a structure which
228** then be linked into a list. Names are chosen to make searching
229** for them easy - not necessarily accurate (eg "cell").
230**
231** Alternative: iosapic_info could point to the IRT it's in.
232** iosapic_register() could search a list of IRT's.
233*/
234static struct irt_entry *irt_cell;
235static size_t irt_num_entry;
236
237static struct irt_entry *iosapic_alloc_irt(int num_entries)
238{
239 unsigned long a;
240
241 /* The IRT needs to be 8-byte aligned for the PDC call.
242 * Normally kmalloc would guarantee larger alignment, but
243 * if CONFIG_DEBUG_SLAB is enabled, then we can get only
244 * 4-byte alignment on 32-bit kernels
245 */
246 a = (unsigned long)kmalloc(sizeof(struct irt_entry) * num_entries + 8, GFP_KERNEL);
247 a = (a + 7) & ~7;
248 return (struct irt_entry *)a;
249}
250
251/**
252 * iosapic_load_irt - Fill in the interrupt routing table
253 * @cell_num: The cell number of the CPU we're currently executing on
254 * @irt: The address to place the new IRT at
255 * @return The number of entries found
256 *
257 * The "Get PCI INT Routing Table Size" option returns the number of
258 * entries in the PCI interrupt routing table for the cell specified
259 * in the cell_number argument. The cell number must be for a cell
260 * within the caller's protection domain.
261 *
262 * The "Get PCI INT Routing Table" option returns, for the cell
263 * specified in the cell_number argument, the PCI interrupt routing
264 * table in the caller allocated memory pointed to by mem_addr.
265 * We assume the IRT only contains entries for I/O SAPIC and
266 * calculate the size based on the size of I/O sapic entries.
267 *
268 * The PCI interrupt routing table entry format is derived from the
269 * IA64 SAL Specification 2.4. The PCI interrupt routing table defines
270 * the routing of PCI interrupt signals between the PCI device output
271 * "pins" and the IO SAPICs' input "lines" (including core I/O PCI
272 * devices). This table does NOT include information for devices/slots
273 * behind PCI to PCI bridges. See PCI to PCI Bridge Architecture Spec.
274 * for the architected method of routing of IRQ's behind PPB's.
275 */
276
277
278static int __init
279iosapic_load_irt(unsigned long cell_num, struct irt_entry **irt)
280{
281 long status; /* PDC return value status */
282 struct irt_entry *table; /* start of interrupt routing tbl */
283 unsigned long num_entries = 0UL;
284
285 BUG_ON(!irt);
286
287 if (is_pdc_pat()) {
288 /* Use pat pdc routine to get interrupt routing table size */
289 DBG("calling get_irt_size (cell %ld)\n", cell_num);
290 status = pdc_pat_get_irt_size(&num_entries, cell_num);
291 DBG("get_irt_size: %ld\n", status);
292
293 BUG_ON(status != PDC_OK);
294 BUG_ON(num_entries == 0);
295
296 /*
297 ** allocate memory for interrupt routing table
298 ** This interface isn't really right. We are assuming
299 ** the contents of the table are exclusively
300 ** for I/O sapic devices.
301 */
302 table = iosapic_alloc_irt(num_entries);
303 if (table == NULL) {
304 printk(KERN_WARNING MODULE_NAME ": read_irt : can "
305 "not alloc mem for IRT\n");
306 return 0;
307 }
308
309 /* get PCI INT routing table */
310 status = pdc_pat_get_irt(table, cell_num);
311 DBG("pdc_pat_get_irt: %ld\n", status);
312 WARN_ON(status != PDC_OK);
313 } else {
314 /*
315 ** C3000/J5000 (and similar) platforms with Sprockets PDC
316 ** will return exactly one IRT for all iosapics.
317 ** So if we have one, don't need to get it again.
318 */
319 if (irt_cell)
320 return 0;
321
322 /* Should be using the Elroy's HPA, but it's ignored anyway */
323 status = pdc_pci_irt_size(&num_entries, 0);
324 DBG("pdc_pci_irt_size: %ld\n", status);
325
326 if (status != PDC_OK) {
327 /* Not a "legacy" system with I/O SAPIC either */
328 return 0;
329 }
330
331 BUG_ON(num_entries == 0);
332
333 table = iosapic_alloc_irt(num_entries);
334 if (!table) {
335 printk(KERN_WARNING MODULE_NAME ": read_irt : can "
336 "not alloc mem for IRT\n");
337 return 0;
338 }
339
340 /* HPA ignored by this call too. */
341 status = pdc_pci_irt(num_entries, 0, table);
342 BUG_ON(status != PDC_OK);
343 }
344
345 /* return interrupt table address */
346 *irt = table;
347
348#ifdef DEBUG_IOSAPIC_IRT
349{
350 struct irt_entry *p = table;
351 int i;
352
353 printk(MODULE_NAME " Interrupt Routing Table (cell %ld)\n", cell_num);
354 printk(MODULE_NAME " start = 0x%p num_entries %ld entry_size %d\n",
355 table,
356 num_entries,
357 (int) sizeof(struct irt_entry));
358
359 for (i = 0 ; i < num_entries ; i++, p++) {
360 printk(MODULE_NAME " %02x %02x %02x %02x %02x %02x %02x %02x %08x%08x\n",
361 p->entry_type, p->entry_length, p->interrupt_type,
362 p->polarity_trigger, p->src_bus_irq_devno, p->src_bus_id,
363 p->src_seg_id, p->dest_iosapic_intin,
364 ((u32 *) p)[2],
365 ((u32 *) p)[3]
366 );
367 }
368}
369#endif /* DEBUG_IOSAPIC_IRT */
370
371 return num_entries;
372}
373
374
375
376void __init iosapic_init(void)
377{
378 unsigned long cell = 0;
379
380 DBG("iosapic_init()\n");
381
382#ifdef __LP64__
383 if (is_pdc_pat()) {
384 int status;
385 struct pdc_pat_cell_num cell_info;
386
387 status = pdc_pat_cell_get_number(&cell_info);
388 if (status == PDC_OK) {
389 cell = cell_info.cell_num;
390 }
391 }
392#endif
393
394 /* get interrupt routing table for this cell */
395 irt_num_entry = iosapic_load_irt(cell, &irt_cell);
396 if (irt_num_entry == 0)
397 irt_cell = NULL; /* old PDC w/o iosapic */
398}
399
400
401/*
402** Return the IRT entry in case we need to look something else up.
403*/
404static struct irt_entry *
405irt_find_irqline(struct iosapic_info *isi, u8 slot, u8 intr_pin)
406{
407 struct irt_entry *i = irt_cell;
408 int cnt; /* track how many entries we've looked at */
409 u8 irq_devno = (slot << IRT_DEV_SHIFT) | (intr_pin-1);
410
411 DBG_IRT("irt_find_irqline() SLOT %d pin %d\n", slot, intr_pin);
412
413 for (cnt=0; cnt < irt_num_entry; cnt++, i++) {
414
415 /*
416 ** Validate: entry_type, entry_length, interrupt_type
417 **
418 ** Difference between validate vs compare is the former
419 ** should print debug info and is not expected to "fail"
420 ** on current platforms.
421 */
422 if (i->entry_type != IRT_IOSAPIC_TYPE) {
423 DBG_IRT(KERN_WARNING MODULE_NAME ":find_irqline(0x%p): skipping entry %d type %d\n", i, cnt, i->entry_type);
424 continue;
425 }
426
427 if (i->entry_length != IRT_IOSAPIC_LENGTH) {
428 DBG_IRT(KERN_WARNING MODULE_NAME ":find_irqline(0x%p): skipping entry %d length %d\n", i, cnt, i->entry_length);
429 continue;
430 }
431
432 if (i->interrupt_type != IRT_VECTORED_INTR) {
433 DBG_IRT(KERN_WARNING MODULE_NAME ":find_irqline(0x%p): skipping entry %d interrupt_type %d\n", i, cnt, i->interrupt_type);
434 continue;
435 }
436
437 if (!COMPARE_IRTE_ADDR(i, isi->isi_hpa))
438 continue;
439
440 if ((i->src_bus_irq_devno & IRT_IRQ_DEVNO_MASK) != irq_devno)
441 continue;
442
443 /*
444 ** Ignore: src_bus_id and rc_seg_id correlate with
445 ** iosapic_info->isi_hpa on HP platforms.
446 ** If needed, pass in "PFA" (aka config space addr)
447 ** instead of slot.
448 */
449
450 /* Found it! */
451 return i;
452 }
453
454 printk(KERN_WARNING MODULE_NAME ": 0x%lx : no IRT entry for slot %d, pin %d\n",
455 isi->isi_hpa, slot, intr_pin);
456 return NULL;
457}
458
459
460/*
461** xlate_pin() supports the skewing of IRQ lines done by subsidiary bridges.
462** Legacy PDC already does this translation for us and stores it in INTR_LINE.
463**
464** PAT PDC needs to basically do what legacy PDC does:
465** o read PIN
466** o adjust PIN in case device is "behind" a PPB
467** (eg 4-port 100BT and SCSI/LAN "Combo Card")
468** o convert slot/pin to I/O SAPIC input line.
469**
470** HP platforms only support:
471** o one level of skewing for any number of PPBs
472** o only support PCI-PCI Bridges.
473*/
474static struct irt_entry *
475iosapic_xlate_pin(struct iosapic_info *isi, struct pci_dev *pcidev)
476{
477 u8 intr_pin, intr_slot;
478
479 pci_read_config_byte(pcidev, PCI_INTERRUPT_PIN, &intr_pin);
480
481 DBG_IRT("iosapic_xlate_pin(%s) SLOT %d pin %d\n",
482 pcidev->slot_name, PCI_SLOT(pcidev->devfn), intr_pin);
483
484 if (intr_pin == 0) {
485 /* The device does NOT support/use IRQ lines. */
486 return NULL;
487 }
488
489 /* Check if pcidev behind a PPB */
490 if (NULL != pcidev->bus->self) {
491 /* Convert pcidev INTR_PIN into something we
492 ** can lookup in the IRT.
493 */
494#ifdef PCI_BRIDGE_FUNCS
495 /*
496 ** Proposal #1:
497 **
498 ** call implementation specific translation function
499 ** This is architecturally "cleaner". HP-UX doesn't
500 ** support other secondary bus types (eg. E/ISA) directly.
501 ** May be needed for other processor (eg IA64) architectures
502 ** or by some ambitous soul who wants to watch TV.
503 */
504 if (pci_bridge_funcs->xlate_intr_line) {
505 intr_pin = pci_bridge_funcs->xlate_intr_line(pcidev);
506 }
507#else /* PCI_BRIDGE_FUNCS */
508 struct pci_bus *p = pcidev->bus;
509 /*
510 ** Proposal #2:
511 ** The "pin" is skewed ((pin + dev - 1) % 4).
512 **
513 ** This isn't very clean since I/O SAPIC must assume:
514 ** - all platforms only have PCI busses.
515 ** - only PCI-PCI bridge (eg not PCI-EISA, PCI-PCMCIA)
516 ** - IRQ routing is only skewed once regardless of
517 ** the number of PPB's between iosapic and device.
518 ** (Bit3 expansion chassis follows this rule)
519 **
520 ** Advantage is it's really easy to implement.
521 */
522 intr_pin = ((intr_pin-1)+PCI_SLOT(pcidev->devfn)) % 4;
523 intr_pin++; /* convert back to INTA-D (1-4) */
524#endif /* PCI_BRIDGE_FUNCS */
525
526 /*
527 ** Locate the host slot the PPB nearest the Host bus
528 ** adapter.
529 */
530 while (NULL != p->parent->self)
531 p = p->parent;
532
533 intr_slot = PCI_SLOT(p->self->devfn);
534 } else {
535 intr_slot = PCI_SLOT(pcidev->devfn);
536 }
537 DBG_IRT("iosapic_xlate_pin: bus %d slot %d pin %d\n",
538 pcidev->bus->secondary, intr_slot, intr_pin);
539
540 return irt_find_irqline(isi, intr_slot, intr_pin);
541}
542
543static void iosapic_rd_irt_entry(struct vector_info *vi , u32 *dp0, u32 *dp1)
544{
545 struct iosapic_info *isp = vi->iosapic;
546 u8 idx = vi->irqline;
547
548 *dp0 = iosapic_read(isp->addr, IOSAPIC_IRDT_ENTRY(idx));
549 *dp1 = iosapic_read(isp->addr, IOSAPIC_IRDT_ENTRY_HI(idx));
550}
551
552
553static void iosapic_wr_irt_entry(struct vector_info *vi, u32 dp0, u32 dp1)
554{
555 struct iosapic_info *isp = vi->iosapic;
556
557 DBG_IRT("iosapic_wr_irt_entry(): irq %d hpa %lx 0x%x 0x%x\n",
558 vi->irqline, isp->isi_hpa, dp0, dp1);
559
560 iosapic_write(isp->addr, IOSAPIC_IRDT_ENTRY(vi->irqline), dp0);
561
562 /* Read the window register to flush the writes down to HW */
563 dp0 = readl(isp->addr+IOSAPIC_REG_WINDOW);
564
565 iosapic_write(isp->addr, IOSAPIC_IRDT_ENTRY_HI(vi->irqline), dp1);
566
567 /* Read the window register to flush the writes down to HW */
568 dp1 = readl(isp->addr+IOSAPIC_REG_WINDOW);
569}
570
571/*
572** set_irt prepares the data (dp0, dp1) according to the vector_info
573** and target cpu (id_eid). dp0/dp1 are then used to program I/O SAPIC
574** IRdT for the given "vector" (aka IRQ line).
575*/
576static void
577iosapic_set_irt_data( struct vector_info *vi, u32 *dp0, u32 *dp1)
578{
579 u32 mode = 0;
580 struct irt_entry *p = vi->irte;
581
582 if ((p->polarity_trigger & IRT_PO_MASK) == IRT_ACTIVE_LO)
583 mode |= IOSAPIC_IRDT_PO_LOW;
584
585 if (((p->polarity_trigger >> IRT_EL_SHIFT) & IRT_EL_MASK) == IRT_LEVEL_TRIG)
586 mode |= IOSAPIC_IRDT_LEVEL_TRIG;
587
588 /*
589 ** IA64 REVISIT
590 ** PA doesn't support EXTINT or LPRIO bits.
591 */
592
593 *dp0 = mode | (u32) vi->txn_data;
594
595 /*
596 ** Extracting id_eid isn't a real clean way of getting it.
597 ** But the encoding is the same for both PA and IA64 platforms.
598 */
599 if (is_pdc_pat()) {
600 /*
601 ** PAT PDC just hands it to us "right".
602 ** txn_addr comes from cpu_data[x].txn_addr.
603 */
604 *dp1 = (u32) (vi->txn_addr);
605 } else {
606 /*
607 ** eg if base_addr == 0xfffa0000),
608 ** we want to get 0xa0ff0000.
609 **
610 ** eid 0x0ff00000 -> 0x00ff0000
611 ** id 0x000ff000 -> 0xff000000
612 */
613 *dp1 = (((u32)vi->txn_addr & 0x0ff00000) >> 4) |
614 (((u32)vi->txn_addr & 0x000ff000) << 12);
615 }
616 DBG_IRT("iosapic_set_irt_data(): 0x%x 0x%x\n", *dp0, *dp1);
617}
618
619
620static struct vector_info *iosapic_get_vector(unsigned int irq)
621{
622 return irq_desc[irq].handler_data;
623}
624
625static void iosapic_disable_irq(unsigned int irq)
626{
627 unsigned long flags;
628 struct vector_info *vi = iosapic_get_vector(irq);
629 u32 d0, d1;
630
631 spin_lock_irqsave(&iosapic_lock, flags);
632 iosapic_rd_irt_entry(vi, &d0, &d1);
633 d0 |= IOSAPIC_IRDT_ENABLE;
634 iosapic_wr_irt_entry(vi, d0, d1);
635 spin_unlock_irqrestore(&iosapic_lock, flags);
636}
637
638static void iosapic_enable_irq(unsigned int irq)
639{
640 struct vector_info *vi = iosapic_get_vector(irq);
641 u32 d0, d1;
642
643 /* data is initialized by fixup_irq */
644 WARN_ON(vi->txn_irq == 0);
645
646 iosapic_set_irt_data(vi, &d0, &d1);
647 iosapic_wr_irt_entry(vi, d0, d1);
648
649#ifdef DEBUG_IOSAPIC_IRT
650{
651 u32 *t = (u32 *) ((ulong) vi->eoi_addr & ~0xffUL);
652 printk("iosapic_enable_irq(): regs %p", vi->eoi_addr);
653 for ( ; t < vi->eoi_addr; t++)
654 printk(" %x", readl(t));
655 printk("\n");
656}
657
658printk("iosapic_enable_irq(): sel ");
659{
660 struct iosapic_info *isp = vi->iosapic;
661
662 for (d0=0x10; d0<0x1e; d0++) {
663 d1 = iosapic_read(isp->addr, d0);
664 printk(" %x", d1);
665 }
666}
667printk("\n");
668#endif
669
670 /*
671 * Issuing I/O SAPIC an EOI causes an interrupt IFF IRQ line is
672 * asserted. IRQ generally should not be asserted when a driver
673 * enables their IRQ. It can lead to "interesting" race conditions
674 * in the driver initialization sequence.
675 */
676 DBG(KERN_DEBUG "enable_irq(%d): eoi(%p, 0x%x)\n", irq,
677 vi->eoi_addr, vi->eoi_data);
678 iosapic_eoi(vi->eoi_addr, vi->eoi_data);
679}
680
681/*
682 * PARISC only supports PCI devices below I/O SAPIC.
683 * PCI only supports level triggered in order to share IRQ lines.
684 * ergo I/O SAPIC must always issue EOI on parisc.
685 *
686 * i386/ia64 support ISA devices and have to deal with
687 * edge-triggered interrupts too.
688 */
689static void iosapic_end_irq(unsigned int irq)
690{
691 struct vector_info *vi = iosapic_get_vector(irq);
692 DBG(KERN_DEBUG "end_irq(%d): eoi(%p, 0x%x)\n", irq,
693 vi->eoi_addr, vi->eoi_data);
694 iosapic_eoi(vi->eoi_addr, vi->eoi_data);
695}
696
697static unsigned int iosapic_startup_irq(unsigned int irq)
698{
699 iosapic_enable_irq(irq);
700 return 0;
701}
702
703static struct hw_interrupt_type iosapic_interrupt_type = {
704 .typename = "IO-SAPIC-level",
705 .startup = iosapic_startup_irq,
706 .shutdown = iosapic_disable_irq,
707 .enable = iosapic_enable_irq,
708 .disable = iosapic_disable_irq,
709 .ack = no_ack_irq,
710 .end = iosapic_end_irq,
711// .set_affinity = iosapic_set_affinity_irq,
712};
713
714int iosapic_fixup_irq(void *isi_obj, struct pci_dev *pcidev)
715{
716 struct iosapic_info *isi = isi_obj;
717 struct irt_entry *irte = NULL; /* only used if PAT PDC */
718 struct vector_info *vi;
719 int isi_line; /* line used by device */
720
721 if (!isi) {
722 printk(KERN_WARNING MODULE_NAME ": hpa not registered for %s\n",
723 pci_name(pcidev));
724 return -1;
725 }
726
727#ifdef CONFIG_SUPERIO
728 /*
729 * HACK ALERT! (non-compliant PCI device support)
730 *
731 * All SuckyIO interrupts are routed through the PIC's on function 1.
732 * But SuckyIO OHCI USB controller gets an IRT entry anyway because
733 * it advertises INT D for INT_PIN. Use that IRT entry to get the
734 * SuckyIO interrupt routing for PICs on function 1 (*BLEECCHH*).
735 */
736 if (is_superio_device(pcidev)) {
737 /* We must call superio_fixup_irq() to register the pdev */
738 pcidev->irq = superio_fixup_irq(pcidev);
739
740 /* Don't return if need to program the IOSAPIC's IRT... */
741 if (PCI_FUNC(pcidev->devfn) != SUPERIO_USB_FN)
742 return pcidev->irq;
743 }
744#endif /* CONFIG_SUPERIO */
745
746 /* lookup IRT entry for isi/slot/pin set */
747 irte = iosapic_xlate_pin(isi, pcidev);
748 if (!irte) {
749 printk("iosapic: no IRTE for %s (IRQ not connected?)\n",
750 pci_name(pcidev));
751 return -1;
752 }
753 DBG_IRT("iosapic_fixup_irq(): irte %p %x %x %x %x %x %x %x %x\n",
754 irte,
755 irte->entry_type,
756 irte->entry_length,
757 irte->polarity_trigger,
758 irte->src_bus_irq_devno,
759 irte->src_bus_id,
760 irte->src_seg_id,
761 irte->dest_iosapic_intin,
762 (u32) irte->dest_iosapic_addr);
763 isi_line = irte->dest_iosapic_intin;
764
765 /* get vector info for this input line */
766 vi = isi->isi_vector + isi_line;
767 DBG_IRT("iosapic_fixup_irq: line %d vi 0x%p\n", isi_line, vi);
768
769 /* If this IRQ line has already been setup, skip it */
770 if (vi->irte)
771 goto out;
772
773 vi->irte = irte;
774
775 /*
776 * Allocate processor IRQ
777 *
778 * XXX/FIXME The txn_alloc_irq() code and related code should be
779 * moved to enable_irq(). That way we only allocate processor IRQ
780 * bits for devices that actually have drivers claiming them.
781 * Right now we assign an IRQ to every PCI device present,
782 * regardless of whether it's used or not.
783 */
784 vi->txn_irq = txn_alloc_irq(8);
785
786 if (vi->txn_irq < 0)
787 panic("I/O sapic: couldn't get TXN IRQ\n");
788
789 /* enable_irq() will use txn_* to program IRdT */
790 vi->txn_addr = txn_alloc_addr(vi->txn_irq);
791 vi->txn_data = txn_alloc_data(vi->txn_irq);
792
793 vi->eoi_addr = isi->addr + IOSAPIC_REG_EOI;
794 vi->eoi_data = cpu_to_le32(vi->txn_data);
795
796 cpu_claim_irq(vi->txn_irq, &iosapic_interrupt_type, vi);
797
798 out:
799 pcidev->irq = vi->txn_irq;
800
801 DBG_IRT("iosapic_fixup_irq() %d:%d %x %x line %d irq %d\n",
802 PCI_SLOT(pcidev->devfn), PCI_FUNC(pcidev->devfn),
803 pcidev->vendor, pcidev->device, isi_line, pcidev->irq);
804
805 return pcidev->irq;
806}
807
808
809/*
810** squirrel away the I/O Sapic Version
811*/
812static unsigned int
813iosapic_rd_version(struct iosapic_info *isi)
814{
815 return iosapic_read(isi->addr, IOSAPIC_REG_VERSION);
816}
817
818
819/*
820** iosapic_register() is called by "drivers" with an integrated I/O SAPIC.
821** Caller must be certain they have an I/O SAPIC and know its MMIO address.
822**
823** o allocate iosapic_info and add it to the list
824** o read iosapic version and squirrel that away
825** o read size of IRdT.
826** o allocate and initialize isi_vector[]
827** o allocate irq region
828*/
829void *iosapic_register(unsigned long hpa)
830{
831 struct iosapic_info *isi = NULL;
832 struct irt_entry *irte = irt_cell;
833 struct vector_info *vip;
834 int cnt; /* track how many entries we've looked at */
835
836 /*
837 * Astro based platforms can only support PCI OLARD if they implement
838 * PAT PDC. Legacy PDC omits LBAs with no PCI devices from the IRT.
839 * Search the IRT and ignore iosapic's which aren't in the IRT.
840 */
841 for (cnt=0; cnt < irt_num_entry; cnt++, irte++) {
842 WARN_ON(IRT_IOSAPIC_TYPE != irte->entry_type);
843 if (COMPARE_IRTE_ADDR(irte, hpa))
844 break;
845 }
846
847 if (cnt >= irt_num_entry) {
848 DBG("iosapic_register() ignoring 0x%lx (NOT FOUND)\n", hpa);
849 return NULL;
850 }
851
852 isi = (struct iosapic_info *)kmalloc(sizeof(struct iosapic_info), GFP_KERNEL);
853 if (!isi) {
854 BUG();
855 return NULL;
856 }
857
858 memset(isi, 0, sizeof(struct iosapic_info));
859
860 isi->addr = ioremap(hpa, 4096);
861 isi->isi_hpa = hpa;
862 isi->isi_version = iosapic_rd_version(isi);
863 isi->isi_num_vectors = IOSAPIC_IRDT_MAX_ENTRY(isi->isi_version) + 1;
864
865 vip = isi->isi_vector = (struct vector_info *)
866 kmalloc(sizeof(struct vector_info) * isi->isi_num_vectors, GFP_KERNEL);
867 if (vip == NULL) {
868 kfree(isi);
869 return NULL;
870 }
871
872 memset(vip, 0, sizeof(struct vector_info) * isi->isi_num_vectors);
873
874 for (cnt=0; cnt < isi->isi_num_vectors; cnt++, vip++) {
875 vip->irqline = (unsigned char) cnt;
876 vip->iosapic = isi;
877 }
878 return isi;
879}
880
881
882#ifdef DEBUG_IOSAPIC
883
884static void
885iosapic_prt_irt(void *irt, long num_entry)
886{
887 unsigned int i, *irp = (unsigned int *) irt;
888
889
890 printk(KERN_DEBUG MODULE_NAME ": Interrupt Routing Table (%lx entries)\n", num_entry);
891
892 for (i=0; i<num_entry; i++, irp += 4) {
893 printk(KERN_DEBUG "%p : %2d %.8x %.8x %.8x %.8x\n",
894 irp, i, irp[0], irp[1], irp[2], irp[3]);
895 }
896}
897
898
899static void
900iosapic_prt_vi(struct vector_info *vi)
901{
902 printk(KERN_DEBUG MODULE_NAME ": vector_info[%d] is at %p\n", vi->irqline, vi);
903 printk(KERN_DEBUG "\t\tstatus: %.4x\n", vi->status);
904 printk(KERN_DEBUG "\t\ttxn_irq: %d\n", vi->txn_irq);
905 printk(KERN_DEBUG "\t\ttxn_addr: %lx\n", vi->txn_addr);
906 printk(KERN_DEBUG "\t\ttxn_data: %lx\n", vi->txn_data);
907 printk(KERN_DEBUG "\t\teoi_addr: %p\n", vi->eoi_addr);
908 printk(KERN_DEBUG "\t\teoi_data: %x\n", vi->eoi_data);
909}
910
911
912static void
913iosapic_prt_isi(struct iosapic_info *isi)
914{
915 printk(KERN_DEBUG MODULE_NAME ": io_sapic_info at %p\n", isi);
916 printk(KERN_DEBUG "\t\tisi_hpa: %lx\n", isi->isi_hpa);
917 printk(KERN_DEBUG "\t\tisi_status: %x\n", isi->isi_status);
918 printk(KERN_DEBUG "\t\tisi_version: %x\n", isi->isi_version);
919 printk(KERN_DEBUG "\t\tisi_vector: %p\n", isi->isi_vector);
920}
921#endif /* DEBUG_IOSAPIC */