aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/parisc/dino.c
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@ppc970.osdl.org>2005-04-16 18:20:36 -0400
committerLinus Torvalds <torvalds@ppc970.osdl.org>2005-04-16 18:20:36 -0400
commit1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 (patch)
tree0bba044c4ce775e45a88a51686b5d9f90697ea9d /drivers/parisc/dino.c
Linux-2.6.12-rc2v2.6.12-rc2
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
Diffstat (limited to 'drivers/parisc/dino.c')
-rw-r--r--drivers/parisc/dino.c1044
1 files changed, 1044 insertions, 0 deletions
diff --git a/drivers/parisc/dino.c b/drivers/parisc/dino.c
new file mode 100644
index 000000000000..b0d2a73d1d47
--- /dev/null
+++ b/drivers/parisc/dino.c
@@ -0,0 +1,1044 @@
1/*
2** DINO manager
3**
4** (c) Copyright 1999 Red Hat Software
5** (c) Copyright 1999 SuSE GmbH
6** (c) Copyright 1999,2000 Hewlett-Packard Company
7** (c) Copyright 2000 Grant Grundler
8**
9** This program is free software; you can redistribute it and/or modify
10** it under the terms of the GNU General Public License as published by
11** the Free Software Foundation; either version 2 of the License, or
12** (at your option) any later version.
13**
14** This module provides access to Dino PCI bus (config/IOport spaces)
15** and helps manage Dino IRQ lines.
16**
17** Dino interrupt handling is a bit complicated.
18** Dino always writes to the broadcast EIR via irr0 for now.
19** (BIG WARNING: using broadcast EIR is a really bad thing for SMP!)
20** Only one processor interrupt is used for the 11 IRQ line
21** inputs to dino.
22**
23** The different between Built-in Dino and Card-Mode
24** dino is in chip initialization and pci device initialization.
25**
26** Linux drivers can only use Card-Mode Dino if pci devices I/O port
27** BARs are configured and used by the driver. Programming MMIO address
28** requires substantial knowledge of available Host I/O address ranges
29** is currently not supported. Port/Config accessor functions are the
30** same. "BIOS" differences are handled within the existing routines.
31*/
32
33/* Changes :
34** 2001-06-14 : Clement Moyroud (moyroudc@esiee.fr)
35** - added support for the integrated RS232.
36*/
37
38/*
39** TODO: create a virtual address for each Dino HPA.
40** GSC code might be able to do this since IODC data tells us
41** how many pages are used. PCI subsystem could (must?) do this
42** for PCI drivers devices which implement/use MMIO registers.
43*/
44
45#include <linux/config.h>
46#include <linux/delay.h>
47#include <linux/types.h>
48#include <linux/kernel.h>
49#include <linux/pci.h>
50#include <linux/init.h>
51#include <linux/ioport.h>
52#include <linux/slab.h>
53#include <linux/interrupt.h> /* for struct irqaction */
54#include <linux/spinlock.h> /* for spinlock_t and prototypes */
55
56#include <asm/pdc.h>
57#include <asm/page.h>
58#include <asm/system.h>
59#include <asm/io.h>
60#include <asm/hardware.h>
61
62#include "gsc.h"
63
64#undef DINO_DEBUG
65
66#ifdef DINO_DEBUG
67#define DBG(x...) printk(x)
68#else
69#define DBG(x...)
70#endif
71
72/*
73** Config accessor functions only pass in the 8-bit bus number
74** and not the 8-bit "PCI Segment" number. Each Dino will be
75** assigned a PCI bus number based on "when" it's discovered.
76**
77** The "secondary" bus number is set to this before calling
78** pci_scan_bus(). If any PPB's are present, the scan will
79** discover them and update the "secondary" and "subordinate"
80** fields in Dino's pci_bus structure.
81**
82** Changes in the configuration *will* result in a different
83** bus number for each dino.
84*/
85
86#define is_card_dino(id) ((id)->hw_type == HPHW_A_DMA)
87
88#define DINO_IAR0 0x004
89#define DINO_IODC_ADDR 0x008
90#define DINO_IODC_DATA_0 0x008
91#define DINO_IODC_DATA_1 0x008
92#define DINO_IRR0 0x00C
93#define DINO_IAR1 0x010
94#define DINO_IRR1 0x014
95#define DINO_IMR 0x018
96#define DINO_IPR 0x01C
97#define DINO_TOC_ADDR 0x020
98#define DINO_ICR 0x024
99#define DINO_ILR 0x028
100#define DINO_IO_COMMAND 0x030
101#define DINO_IO_STATUS 0x034
102#define DINO_IO_CONTROL 0x038
103#define DINO_IO_GSC_ERR_RESP 0x040
104#define DINO_IO_ERR_INFO 0x044
105#define DINO_IO_PCI_ERR_RESP 0x048
106#define DINO_IO_FBB_EN 0x05c
107#define DINO_IO_ADDR_EN 0x060
108#define DINO_PCI_ADDR 0x064
109#define DINO_CONFIG_DATA 0x068
110#define DINO_IO_DATA 0x06c
111#define DINO_MEM_DATA 0x070 /* Dino 3.x only */
112#define DINO_GSC2X_CONFIG 0x7b4
113#define DINO_GMASK 0x800
114#define DINO_PAMR 0x804
115#define DINO_PAPR 0x808
116#define DINO_DAMODE 0x80c
117#define DINO_PCICMD 0x810
118#define DINO_PCISTS 0x814
119#define DINO_MLTIM 0x81c
120#define DINO_BRDG_FEAT 0x820
121#define DINO_PCIROR 0x824
122#define DINO_PCIWOR 0x828
123#define DINO_TLTIM 0x830
124
125#define DINO_IRQS 11 /* bits 0-10 are architected */
126#define DINO_IRR_MASK 0x5ff /* only 10 bits are implemented */
127
128#define DINO_MASK_IRQ(x) (1<<(x))
129
130#define PCIINTA 0x001
131#define PCIINTB 0x002
132#define PCIINTC 0x004
133#define PCIINTD 0x008
134#define PCIINTE 0x010
135#define PCIINTF 0x020
136#define GSCEXTINT 0x040
137/* #define xxx 0x080 - bit 7 is "default" */
138/* #define xxx 0x100 - bit 8 not used */
139/* #define xxx 0x200 - bit 9 not used */
140#define RS232INT 0x400
141
142struct dino_device
143{
144 struct pci_hba_data hba; /* 'C' inheritance - must be first */
145 spinlock_t dinosaur_pen;
146 unsigned long txn_addr; /* EIR addr to generate interrupt */
147 u32 txn_data; /* EIR data assign to each dino */
148 u32 imr; /* IRQ's which are enabled */
149 int global_irq[12]; /* map IMR bit to global irq */
150#ifdef DINO_DEBUG
151 unsigned int dino_irr0; /* save most recent IRQ line stat */
152#endif
153};
154
155/* Looks nice and keeps the compiler happy */
156#define DINO_DEV(d) ((struct dino_device *) d)
157
158
159/*
160 * Dino Configuration Space Accessor Functions
161 */
162
163#define DINO_CFG_TOK(bus,dfn,pos) ((u32) ((bus)<<16 | (dfn)<<8 | (pos)))
164
165/*
166 * keep the current highest bus count to assist in allocating busses. This
167 * tries to keep a global bus count total so that when we discover an
168 * entirely new bus, it can be given a unique bus number.
169 */
170static int dino_current_bus = 0;
171
172static int dino_cfg_read(struct pci_bus *bus, unsigned int devfn, int where,
173 int size, u32 *val)
174{
175 struct dino_device *d = DINO_DEV(parisc_walk_tree(bus->bridge));
176 u32 local_bus = (bus->parent == NULL) ? 0 : bus->secondary;
177 u32 v = DINO_CFG_TOK(local_bus, devfn, where & ~3);
178 void __iomem *base_addr = d->hba.base_addr;
179 unsigned long flags;
180
181 spin_lock_irqsave(&d->dinosaur_pen, flags);
182
183 /* tell HW which CFG address */
184 __raw_writel(v, base_addr + DINO_PCI_ADDR);
185
186 /* generate cfg read cycle */
187 if (size == 1) {
188 *val = readb(base_addr + DINO_CONFIG_DATA + (where & 3));
189 } else if (size == 2) {
190 *val = readw(base_addr + DINO_CONFIG_DATA + (where & 2));
191 } else if (size == 4) {
192 *val = readl(base_addr + DINO_CONFIG_DATA);
193 }
194
195 spin_unlock_irqrestore(&d->dinosaur_pen, flags);
196 return 0;
197}
198
199/*
200 * Dino address stepping "feature":
201 * When address stepping, Dino attempts to drive the bus one cycle too soon
202 * even though the type of cycle (config vs. MMIO) might be different.
203 * The read of Ven/Prod ID is harmless and avoids Dino's address stepping.
204 */
205static int dino_cfg_write(struct pci_bus *bus, unsigned int devfn, int where,
206 int size, u32 val)
207{
208 struct dino_device *d = DINO_DEV(parisc_walk_tree(bus->bridge));
209 u32 local_bus = (bus->parent == NULL) ? 0 : bus->secondary;
210 u32 v = DINO_CFG_TOK(local_bus, devfn, where & ~3);
211 void __iomem *base_addr = d->hba.base_addr;
212 unsigned long flags;
213
214 spin_lock_irqsave(&d->dinosaur_pen, flags);
215
216 /* avoid address stepping feature */
217 __raw_writel(v & 0xffffff00, base_addr + DINO_PCI_ADDR);
218 __raw_readl(base_addr + DINO_CONFIG_DATA);
219
220 /* tell HW which CFG address */
221 __raw_writel(v, base_addr + DINO_PCI_ADDR);
222 /* generate cfg read cycle */
223 if (size == 1) {
224 writeb(val, base_addr + DINO_CONFIG_DATA + (where & 3));
225 } else if (size == 2) {
226 writew(val, base_addr + DINO_CONFIG_DATA + (where & 2));
227 } else if (size == 4) {
228 writel(val, base_addr + DINO_CONFIG_DATA);
229 }
230
231 spin_unlock_irqrestore(&d->dinosaur_pen, flags);
232 return 0;
233}
234
235static struct pci_ops dino_cfg_ops = {
236 .read = dino_cfg_read,
237 .write = dino_cfg_write,
238};
239
240
241/*
242 * Dino "I/O Port" Space Accessor Functions
243 *
244 * Many PCI devices don't require use of I/O port space (eg Tulip,
245 * NCR720) since they export the same registers to both MMIO and
246 * I/O port space. Performance is going to stink if drivers use
247 * I/O port instead of MMIO.
248 */
249
250#define DINO_PORT_IN(type, size, mask) \
251static u##size dino_in##size (struct pci_hba_data *d, u16 addr) \
252{ \
253 u##size v; \
254 unsigned long flags; \
255 spin_lock_irqsave(&(DINO_DEV(d)->dinosaur_pen), flags); \
256 /* tell HW which IO Port address */ \
257 __raw_writel((u32) addr, d->base_addr + DINO_PCI_ADDR); \
258 /* generate I/O PORT read cycle */ \
259 v = read##type(d->base_addr+DINO_IO_DATA+(addr&mask)); \
260 spin_unlock_irqrestore(&(DINO_DEV(d)->dinosaur_pen), flags); \
261 return v; \
262}
263
264DINO_PORT_IN(b, 8, 3)
265DINO_PORT_IN(w, 16, 2)
266DINO_PORT_IN(l, 32, 0)
267
268#define DINO_PORT_OUT(type, size, mask) \
269static void dino_out##size (struct pci_hba_data *d, u16 addr, u##size val) \
270{ \
271 unsigned long flags; \
272 spin_lock_irqsave(&(DINO_DEV(d)->dinosaur_pen), flags); \
273 /* tell HW which IO port address */ \
274 __raw_writel((u32) addr, d->base_addr + DINO_PCI_ADDR); \
275 /* generate cfg write cycle */ \
276 write##type(val, d->base_addr+DINO_IO_DATA+(addr&mask)); \
277 spin_unlock_irqrestore(&(DINO_DEV(d)->dinosaur_pen), flags); \
278}
279
280DINO_PORT_OUT(b, 8, 3)
281DINO_PORT_OUT(w, 16, 2)
282DINO_PORT_OUT(l, 32, 0)
283
284struct pci_port_ops dino_port_ops = {
285 .inb = dino_in8,
286 .inw = dino_in16,
287 .inl = dino_in32,
288 .outb = dino_out8,
289 .outw = dino_out16,
290 .outl = dino_out32
291};
292
293static void dino_disable_irq(unsigned int irq)
294{
295 struct dino_device *dino_dev = irq_desc[irq].handler_data;
296 int local_irq = gsc_find_local_irq(irq, dino_dev->global_irq, irq);
297
298 DBG(KERN_WARNING "%s(0x%p, %d)\n", __FUNCTION__, irq_dev, irq);
299
300 /* Clear the matching bit in the IMR register */
301 dino_dev->imr &= ~(DINO_MASK_IRQ(local_irq));
302 __raw_writel(dino_dev->imr, dino_dev->hba.base_addr+DINO_IMR);
303}
304
305static void dino_enable_irq(unsigned int irq)
306{
307 struct dino_device *dino_dev = irq_desc[irq].handler_data;
308 int local_irq = gsc_find_local_irq(irq, dino_dev->global_irq, irq);
309 u32 tmp;
310
311 DBG(KERN_WARNING "%s(0x%p, %d)\n", __FUNCTION__, irq_dev, irq);
312
313 /*
314 ** clear pending IRQ bits
315 **
316 ** This does NOT change ILR state!
317 ** See comment below for ILR usage.
318 */
319 __raw_readl(dino_dev->hba.base_addr+DINO_IPR);
320
321 /* set the matching bit in the IMR register */
322 dino_dev->imr |= DINO_MASK_IRQ(local_irq); /* used in dino_isr() */
323 __raw_writel( dino_dev->imr, dino_dev->hba.base_addr+DINO_IMR);
324
325 /* Emulate "Level Triggered" Interrupt
326 ** Basically, a driver is blowing it if the IRQ line is asserted
327 ** while the IRQ is disabled. But tulip.c seems to do that....
328 ** Give 'em a kluge award and a nice round of applause!
329 **
330 ** The gsc_write will generate an interrupt which invokes dino_isr().
331 ** dino_isr() will read IPR and find nothing. But then catch this
332 ** when it also checks ILR.
333 */
334 tmp = __raw_readl(dino_dev->hba.base_addr+DINO_ILR);
335 if (tmp & DINO_MASK_IRQ(local_irq)) {
336 DBG(KERN_WARNING "%s(): IRQ asserted! (ILR 0x%x)\n",
337 __FUNCTION__, tmp);
338 gsc_writel(dino_dev->txn_data, dino_dev->txn_addr);
339 }
340}
341
342static unsigned int dino_startup_irq(unsigned int irq)
343{
344 dino_enable_irq(irq);
345 return 0;
346}
347
348static struct hw_interrupt_type dino_interrupt_type = {
349 .typename = "GSC-PCI",
350 .startup = dino_startup_irq,
351 .shutdown = dino_disable_irq,
352 .enable = dino_enable_irq,
353 .disable = dino_disable_irq,
354 .ack = no_ack_irq,
355 .end = no_end_irq,
356};
357
358
359/*
360 * Handle a Processor interrupt generated by Dino.
361 *
362 * ilr_loop counter is a kluge to prevent a "stuck" IRQ line from
363 * wedging the CPU. Could be removed or made optional at some point.
364 */
365static irqreturn_t
366dino_isr(int irq, void *intr_dev, struct pt_regs *regs)
367{
368 struct dino_device *dino_dev = intr_dev;
369 u32 mask;
370 int ilr_loop = 100;
371
372 /* read and acknowledge pending interrupts */
373#ifdef DINO_DEBUG
374 dino_dev->dino_irr0 =
375#endif
376 mask = __raw_readl(dino_dev->hba.base_addr+DINO_IRR0) & DINO_IRR_MASK;
377
378 if (mask == 0)
379 return IRQ_NONE;
380
381ilr_again:
382 do {
383 int local_irq = __ffs(mask);
384 int irq = dino_dev->global_irq[local_irq];
385 DBG(KERN_DEBUG "%s(%d, %p) mask 0x%x\n",
386 __FUNCTION__, irq, intr_dev, mask);
387 __do_IRQ(irq, regs);
388 mask &= ~(1 << local_irq);
389 } while (mask);
390
391 /* Support for level triggered IRQ lines.
392 **
393 ** Dropping this support would make this routine *much* faster.
394 ** But since PCI requires level triggered IRQ line to share lines...
395 ** device drivers may assume lines are level triggered (and not
396 ** edge triggered like EISA/ISA can be).
397 */
398 mask = __raw_readl(dino_dev->hba.base_addr+DINO_ILR) & dino_dev->imr;
399 if (mask) {
400 if (--ilr_loop > 0)
401 goto ilr_again;
402 printk(KERN_ERR "Dino 0x%p: stuck interrupt %d\n",
403 dino_dev->hba.base_addr, mask);
404 return IRQ_NONE;
405 }
406 return IRQ_HANDLED;
407}
408
409static void dino_assign_irq(struct dino_device *dino, int local_irq, int *irqp)
410{
411 int irq = gsc_assign_irq(&dino_interrupt_type, dino);
412 if (irq == NO_IRQ)
413 return;
414
415 *irqp = irq;
416 dino->global_irq[local_irq] = irq;
417}
418
419static void dino_choose_irq(struct parisc_device *dev, void *ctrl)
420{
421 int irq;
422 struct dino_device *dino = ctrl;
423
424 switch (dev->id.sversion) {
425 case 0x00084: irq = 8; break; /* PS/2 */
426 case 0x0008c: irq = 10; break; /* RS232 */
427 case 0x00096: irq = 8; break; /* PS/2 */
428 default: return; /* Unknown */
429 }
430
431 dino_assign_irq(dino, irq, &dev->irq);
432}
433
434static void __init
435dino_bios_init(void)
436{
437 DBG("dino_bios_init\n");
438}
439
440/*
441 * dino_card_setup - Set up the memory space for a Dino in card mode.
442 * @bus: the bus under this dino
443 *
444 * Claim an 8MB chunk of unused IO space and call the generic PCI routines
445 * to set up the addresses of the devices on this bus.
446 */
447#define _8MB 0x00800000UL
448static void __init
449dino_card_setup(struct pci_bus *bus, void __iomem *base_addr)
450{
451 int i;
452 struct dino_device *dino_dev = DINO_DEV(parisc_walk_tree(bus->bridge));
453 struct resource *res;
454 char name[128];
455 int size;
456
457 res = &dino_dev->hba.lmmio_space;
458 res->flags = IORESOURCE_MEM;
459 size = scnprintf(name, sizeof(name), "Dino LMMIO (%s)",
460 bus->bridge->bus_id);
461 res->name = kmalloc(size+1, GFP_KERNEL);
462 if(res->name)
463 strcpy((char *)res->name, name);
464 else
465 res->name = dino_dev->hba.lmmio_space.name;
466
467
468 if (ccio_allocate_resource(dino_dev->hba.dev, res, _8MB,
469 F_EXTEND(0xf0000000UL) | _8MB,
470 F_EXTEND(0xffffffffUL) &~ _8MB, _8MB) < 0) {
471 struct list_head *ln, *tmp_ln;
472
473 printk(KERN_ERR "Dino: cannot attach bus %s\n",
474 bus->bridge->bus_id);
475 /* kill the bus, we can't do anything with it */
476 list_for_each_safe(ln, tmp_ln, &bus->devices) {
477 struct pci_dev *dev = pci_dev_b(ln);
478
479 list_del(&dev->global_list);
480 list_del(&dev->bus_list);
481 }
482
483 return;
484 }
485 bus->resource[1] = res;
486 bus->resource[0] = &(dino_dev->hba.io_space);
487
488 /* Now tell dino what range it has */
489 for (i = 1; i < 31; i++) {
490 if (res->start == F_EXTEND(0xf0000000UL | (i * _8MB)))
491 break;
492 }
493 DBG("DINO GSC WRITE i=%d, start=%lx, dino addr = %lx\n",
494 i, res->start, base_addr + DINO_IO_ADDR_EN);
495 __raw_writel(1 << i, base_addr + DINO_IO_ADDR_EN);
496}
497
498static void __init
499dino_card_fixup(struct pci_dev *dev)
500{
501 u32 irq_pin;
502
503 /*
504 ** REVISIT: card-mode PCI-PCI expansion chassis do exist.
505 ** Not sure they were ever productized.
506 ** Die here since we'll die later in dino_inb() anyway.
507 */
508 if ((dev->class >> 8) == PCI_CLASS_BRIDGE_PCI) {
509 panic("Card-Mode Dino: PCI-PCI Bridge not supported\n");
510 }
511
512 /*
513 ** Set Latency Timer to 0xff (not a shared bus)
514 ** Set CACHELINE_SIZE.
515 */
516 dino_cfg_write(dev->bus, dev->devfn,
517 PCI_CACHE_LINE_SIZE, 2, 0xff00 | L1_CACHE_BYTES/4);
518
519 /*
520 ** Program INT_LINE for card-mode devices.
521 ** The cards are hardwired according to this algorithm.
522 ** And it doesn't matter if PPB's are present or not since
523 ** the IRQ lines bypass the PPB.
524 **
525 ** "-1" converts INTA-D (1-4) to PCIINTA-D (0-3) range.
526 ** The additional "-1" adjusts for skewing the IRQ<->slot.
527 */
528 dino_cfg_read(dev->bus, dev->devfn, PCI_INTERRUPT_PIN, 1, &irq_pin);
529 dev->irq = (irq_pin + PCI_SLOT(dev->devfn) - 1) % 4 ;
530
531 /* Shouldn't really need to do this but it's in case someone tries
532 ** to bypass PCI services and look at the card themselves.
533 */
534 dino_cfg_write(dev->bus, dev->devfn, PCI_INTERRUPT_LINE, 1, dev->irq);
535}
536
537/* The alignment contraints for PCI bridges under dino */
538#define DINO_BRIDGE_ALIGN 0x100000
539
540
541static void __init
542dino_fixup_bus(struct pci_bus *bus)
543{
544 struct list_head *ln;
545 struct pci_dev *dev;
546 struct dino_device *dino_dev = DINO_DEV(parisc_walk_tree(bus->bridge));
547 int port_base = HBA_PORT_BASE(dino_dev->hba.hba_num);
548
549 DBG(KERN_WARNING "%s(0x%p) bus %d platform_data 0x%p\n",
550 __FUNCTION__, bus, bus->secondary,
551 bus->bridge->platform_data);
552
553 /* Firmware doesn't set up card-mode dino, so we have to */
554 if (is_card_dino(&dino_dev->hba.dev->id)) {
555 dino_card_setup(bus, dino_dev->hba.base_addr);
556 } else if(bus->parent == NULL) {
557 /* must have a dino above it, reparent the resources
558 * into the dino window */
559 int i;
560 struct resource *res = &dino_dev->hba.lmmio_space;
561
562 bus->resource[0] = &(dino_dev->hba.io_space);
563 for(i = 0; i < DINO_MAX_LMMIO_RESOURCES; i++) {
564 if(res[i].flags == 0)
565 break;
566 bus->resource[i+1] = &res[i];
567 }
568
569 } else if(bus->self) {
570 int i;
571
572 pci_read_bridge_bases(bus);
573
574
575 for(i = PCI_BRIDGE_RESOURCES; i < PCI_NUM_RESOURCES; i++) {
576 if((bus->self->resource[i].flags &
577 (IORESOURCE_IO | IORESOURCE_MEM)) == 0)
578 continue;
579
580 if(bus->self->resource[i].flags & IORESOURCE_MEM) {
581 /* There's a quirk to alignment of
582 * bridge memory resources: the start
583 * is the alignment and start-end is
584 * the size. However, firmware will
585 * have assigned start and end, so we
586 * need to take this into account */
587 bus->self->resource[i].end = bus->self->resource[i].end - bus->self->resource[i].start + DINO_BRIDGE_ALIGN;
588 bus->self->resource[i].start = DINO_BRIDGE_ALIGN;
589
590 }
591
592 DBG("DEBUG %s assigning %d [0x%lx,0x%lx]\n",
593 bus->self->dev.bus_id, i,
594 bus->self->resource[i].start,
595 bus->self->resource[i].end);
596 pci_assign_resource(bus->self, i);
597 DBG("DEBUG %s after assign %d [0x%lx,0x%lx]\n",
598 bus->self->dev.bus_id, i,
599 bus->self->resource[i].start,
600 bus->self->resource[i].end);
601 }
602 }
603
604
605 list_for_each(ln, &bus->devices) {
606 int i;
607
608 dev = pci_dev_b(ln);
609 if (is_card_dino(&dino_dev->hba.dev->id))
610 dino_card_fixup(dev);
611
612 /*
613 ** P2PB's only have 2 BARs, no IRQs.
614 ** I'd like to just ignore them for now.
615 */
616 if ((dev->class >> 8) == PCI_CLASS_BRIDGE_PCI)
617 continue;
618
619 /* Adjust the I/O Port space addresses */
620 for (i = 0; i < PCI_NUM_RESOURCES; i++) {
621 struct resource *res = &dev->resource[i];
622 if (res->flags & IORESOURCE_IO) {
623 res->start |= port_base;
624 res->end |= port_base;
625 }
626#ifdef __LP64__
627 /* Sign Extend MMIO addresses */
628 else if (res->flags & IORESOURCE_MEM) {
629 res->start |= F_EXTEND(0UL);
630 res->end |= F_EXTEND(0UL);
631 }
632#endif
633 }
634 /* null out the ROM resource if there is one (we don't
635 * care about an expansion rom on parisc, since it
636 * usually contains (x86) bios code) */
637 dev->resource[PCI_ROM_RESOURCE].flags = 0;
638
639 if(dev->irq == 255) {
640
641#define DINO_FIX_UNASSIGNED_INTERRUPTS
642#ifdef DINO_FIX_UNASSIGNED_INTERRUPTS
643
644 /* This code tries to assign an unassigned
645 * interrupt. Leave it disabled unless you
646 * *really* know what you're doing since the
647 * pin<->interrupt line mapping varies by bus
648 * and machine */
649
650 u32 irq_pin;
651
652 dino_cfg_read(dev->bus, dev->devfn,
653 PCI_INTERRUPT_PIN, 1, &irq_pin);
654 irq_pin = (irq_pin + PCI_SLOT(dev->devfn) - 1) % 4 ;
655 printk(KERN_WARNING "Device %s has undefined IRQ, "
656 "setting to %d\n", pci_name(dev), irq_pin);
657 dino_cfg_write(dev->bus, dev->devfn,
658 PCI_INTERRUPT_LINE, 1, irq_pin);
659 dino_assign_irq(dino_dev, irq_pin, &dev->irq);
660#else
661 dev->irq = 65535;
662 printk(KERN_WARNING "Device %s has unassigned IRQ\n", pci_name(dev));
663#endif
664 } else {
665
666 /* Adjust INT_LINE for that busses region */
667 dino_assign_irq(dino_dev, dev->irq, &dev->irq);
668 }
669 }
670}
671
672
673struct pci_bios_ops dino_bios_ops = {
674 .init = dino_bios_init,
675 .fixup_bus = dino_fixup_bus
676};
677
678
679/*
680 * Initialise a DINO controller chip
681 */
682static void __init
683dino_card_init(struct dino_device *dino_dev)
684{
685 u32 brdg_feat = 0x00784e05;
686
687 __raw_writel(0x00000000, dino_dev->hba.base_addr+DINO_GMASK);
688 __raw_writel(0x00000001, dino_dev->hba.base_addr+DINO_IO_FBB_EN);
689 __raw_writel(0x00000000, dino_dev->hba.base_addr+DINO_ICR);
690
691#if 1
692/* REVISIT - should be a runtime check (eg if (CPU_IS_PCX_L) ...) */
693 /*
694 ** PCX-L processors don't support XQL like Dino wants it.
695 ** PCX-L2 ignore XQL signal and it doesn't matter.
696 */
697 brdg_feat &= ~0x4; /* UXQL */
698#endif
699 __raw_writel( brdg_feat, dino_dev->hba.base_addr+DINO_BRDG_FEAT);
700
701 /*
702 ** Don't enable address decoding until we know which I/O range
703 ** currently is available from the host. Only affects MMIO
704 ** and not I/O port space.
705 */
706 __raw_writel(0x00000000, dino_dev->hba.base_addr+DINO_IO_ADDR_EN);
707
708 __raw_writel(0x00000000, dino_dev->hba.base_addr+DINO_DAMODE);
709 __raw_writel(0x00222222, dino_dev->hba.base_addr+DINO_PCIROR);
710 __raw_writel(0x00222222, dino_dev->hba.base_addr+DINO_PCIWOR);
711
712 __raw_writel(0x00000040, dino_dev->hba.base_addr+DINO_MLTIM);
713 __raw_writel(0x00000080, dino_dev->hba.base_addr+DINO_IO_CONTROL);
714 __raw_writel(0x0000008c, dino_dev->hba.base_addr+DINO_TLTIM);
715
716 /* Disable PAMR before writing PAPR */
717 __raw_writel(0x0000007e, dino_dev->hba.base_addr+DINO_PAMR);
718 __raw_writel(0x0000007f, dino_dev->hba.base_addr+DINO_PAPR);
719 __raw_writel(0x00000000, dino_dev->hba.base_addr+DINO_PAMR);
720
721 /*
722 ** Dino ERS encourages enabling FBB (0x6f).
723 ** We can't until we know *all* devices below us can support it.
724 ** (Something in device configuration header tells us).
725 */
726 __raw_writel(0x0000004f, dino_dev->hba.base_addr+DINO_PCICMD);
727
728 /* Somewhere, the PCI spec says give devices 1 second
729 ** to recover from the #RESET being de-asserted.
730 ** Experience shows most devices only need 10ms.
731 ** This short-cut speeds up booting significantly.
732 */
733 mdelay(pci_post_reset_delay);
734}
735
736static int __init
737dino_bridge_init(struct dino_device *dino_dev, const char *name)
738{
739 unsigned long io_addr;
740 int result, i, count=0;
741 struct resource *res, *prevres = NULL;
742 /*
743 * Decoding IO_ADDR_EN only works for Built-in Dino
744 * since PDC has already initialized this.
745 */
746
747 io_addr = __raw_readl(dino_dev->hba.base_addr + DINO_IO_ADDR_EN);
748 if (io_addr == 0) {
749 printk(KERN_WARNING "%s: No PCI devices enabled.\n", name);
750 return -ENODEV;
751 }
752
753 res = &dino_dev->hba.lmmio_space;
754 for (i = 0; i < 32; i++) {
755 unsigned long start, end;
756
757 if((io_addr & (1 << i)) == 0)
758 continue;
759
760 start = (unsigned long)(signed int)(0xf0000000 | (i << 23));
761 end = start + 8 * 1024 * 1024 - 1;
762
763 DBG("DINO RANGE %d is at 0x%lx-0x%lx\n", count,
764 start, end);
765
766 if(prevres && prevres->end + 1 == start) {
767 prevres->end = end;
768 } else {
769 if(count >= DINO_MAX_LMMIO_RESOURCES) {
770 printk(KERN_ERR "%s is out of resource windows for range %d (0x%lx-0x%lx)\n", name, count, start, end);
771 break;
772 }
773 prevres = res;
774 res->start = start;
775 res->end = end;
776 res->flags = IORESOURCE_MEM;
777 res->name = kmalloc(64, GFP_KERNEL);
778 if(res->name)
779 snprintf((char *)res->name, 64, "%s LMMIO %d",
780 name, count);
781 res++;
782 count++;
783 }
784 }
785
786 res = &dino_dev->hba.lmmio_space;
787
788 for(i = 0; i < DINO_MAX_LMMIO_RESOURCES; i++) {
789 if(res[i].flags == 0)
790 break;
791
792 result = ccio_request_resource(dino_dev->hba.dev, &res[i]);
793 if (result < 0) {
794 printk(KERN_ERR "%s: failed to claim PCI Bus address space %d (0x%lx-0x%lx)!\n", name, i, res[i].start, res[i].end);
795 return result;
796 }
797 }
798 return 0;
799}
800
801static int __init dino_common_init(struct parisc_device *dev,
802 struct dino_device *dino_dev, const char *name)
803{
804 int status;
805 u32 eim;
806 struct gsc_irq gsc_irq;
807 struct resource *res;
808
809 pcibios_register_hba(&dino_dev->hba);
810
811 pci_bios = &dino_bios_ops; /* used by pci_scan_bus() */
812 pci_port = &dino_port_ops;
813
814 /*
815 ** Note: SMP systems can make use of IRR1/IAR1 registers
816 ** But it won't buy much performance except in very
817 ** specific applications/configurations. Note Dino
818 ** still only has 11 IRQ input lines - just map some of them
819 ** to a different processor.
820 */
821 dev->irq = gsc_alloc_irq(&gsc_irq);
822 dino_dev->txn_addr = gsc_irq.txn_addr;
823 dino_dev->txn_data = gsc_irq.txn_data;
824 eim = ((u32) gsc_irq.txn_addr) | gsc_irq.txn_data;
825
826 /*
827 ** Dino needs a PA "IRQ" to get a processor's attention.
828 ** arch/parisc/kernel/irq.c returns an EIRR bit.
829 */
830 if (dev->irq < 0) {
831 printk(KERN_WARNING "%s: gsc_alloc_irq() failed\n", name);
832 return 1;
833 }
834
835 status = request_irq(dev->irq, dino_isr, 0, name, dino_dev);
836 if (status) {
837 printk(KERN_WARNING "%s: request_irq() failed with %d\n",
838 name, status);
839 return 1;
840 }
841
842 /* Support the serial port which is sometimes attached on built-in
843 * Dino / Cujo chips.
844 */
845
846 gsc_fixup_irqs(dev, dino_dev, dino_choose_irq);
847
848 /*
849 ** This enables DINO to generate interrupts when it sees
850 ** any of its inputs *change*. Just asserting an IRQ
851 ** before it's enabled (ie unmasked) isn't good enough.
852 */
853 __raw_writel(eim, dino_dev->hba.base_addr+DINO_IAR0);
854
855 /*
856 ** Some platforms don't clear Dino's IRR0 register at boot time.
857 ** Reading will clear it now.
858 */
859 __raw_readl(dino_dev->hba.base_addr+DINO_IRR0);
860
861 /* allocate I/O Port resource region */
862 res = &dino_dev->hba.io_space;
863 if (dev->id.hversion == 0x680 || is_card_dino(&dev->id)) {
864 res->name = "Dino I/O Port";
865 } else {
866 res->name = "Cujo I/O Port";
867 }
868 res->start = HBA_PORT_BASE(dino_dev->hba.hba_num);
869 res->end = res->start + (HBA_PORT_SPACE_SIZE - 1);
870 res->flags = IORESOURCE_IO; /* do not mark it busy ! */
871 if (request_resource(&ioport_resource, res) < 0) {
872 printk(KERN_ERR "%s: request I/O Port region failed "
873 "0x%lx/%lx (hpa 0x%p)\n",
874 name, res->start, res->end, dino_dev->hba.base_addr);
875 return 1;
876 }
877
878 return 0;
879}
880
881#define CUJO_RAVEN_ADDR F_EXTEND(0xf1000000UL)
882#define CUJO_FIREHAWK_ADDR F_EXTEND(0xf1604000UL)
883#define CUJO_RAVEN_BADPAGE 0x01003000UL
884#define CUJO_FIREHAWK_BADPAGE 0x01607000UL
885
886static const char *dino_vers[] = {
887 "2.0",
888 "2.1",
889 "3.0",
890 "3.1"
891};
892
893static const char *cujo_vers[] = {
894 "1.0",
895 "2.0"
896};
897
898void ccio_cujo20_fixup(struct parisc_device *dev, u32 iovp);
899
900/*
901** Determine if dino should claim this chip (return 0) or not (return 1).
902** If so, initialize the chip appropriately (card-mode vs bridge mode).
903** Much of the initialization is common though.
904*/
905static int __init
906dino_driver_callback(struct parisc_device *dev)
907{
908 struct dino_device *dino_dev; // Dino specific control struct
909 const char *version = "unknown";
910 char *name;
911 int is_cujo = 0;
912 struct pci_bus *bus;
913
914 name = "Dino";
915 if (is_card_dino(&dev->id)) {
916 version = "3.x (card mode)";
917 } else {
918 if(dev->id.hversion == 0x680) {
919 if (dev->id.hversion_rev < 4) {
920 version = dino_vers[dev->id.hversion_rev];
921 }
922 } else {
923 name = "Cujo";
924 is_cujo = 1;
925 if (dev->id.hversion_rev < 2) {
926 version = cujo_vers[dev->id.hversion_rev];
927 }
928 }
929 }
930
931 printk("%s version %s found at 0x%lx\n", name, version, dev->hpa);
932
933 if (!request_mem_region(dev->hpa, PAGE_SIZE, name)) {
934 printk(KERN_ERR "DINO: Hey! Someone took my MMIO space (0x%ld)!\n",
935 dev->hpa);
936 return 1;
937 }
938
939 /* Check for bugs */
940 if (is_cujo && dev->id.hversion_rev == 1) {
941#ifdef CONFIG_IOMMU_CCIO
942 printk(KERN_WARNING "Enabling Cujo 2.0 bug workaround\n");
943 if (dev->hpa == (unsigned long)CUJO_RAVEN_ADDR) {
944 ccio_cujo20_fixup(dev, CUJO_RAVEN_BADPAGE);
945 } else if (dev->hpa == (unsigned long)CUJO_FIREHAWK_ADDR) {
946 ccio_cujo20_fixup(dev, CUJO_FIREHAWK_BADPAGE);
947 } else {
948 printk("Don't recognise Cujo at address 0x%lx, not enabling workaround\n", dev->hpa);
949 }
950#endif
951 } else if (!is_cujo && !is_card_dino(&dev->id) &&
952 dev->id.hversion_rev < 3) {
953 printk(KERN_WARNING
954"The GSCtoPCI (Dino hrev %d) bus converter found may exhibit\n"
955"data corruption. See Service Note Numbers: A4190A-01, A4191A-01.\n"
956"Systems shipped after Aug 20, 1997 will not exhibit this problem.\n"
957"Models affected: C180, C160, C160L, B160L, and B132L workstations.\n\n",
958 dev->id.hversion_rev);
959/* REVISIT: why are C200/C240 listed in the README table but not
960** "Models affected"? Could be an omission in the original literature.
961*/
962 }
963
964 dino_dev = kmalloc(sizeof(struct dino_device), GFP_KERNEL);
965 if (!dino_dev) {
966 printk("dino_init_chip - couldn't alloc dino_device\n");
967 return 1;
968 }
969
970 memset(dino_dev, 0, sizeof(struct dino_device));
971
972 dino_dev->hba.dev = dev;
973 dino_dev->hba.base_addr = ioremap(dev->hpa, 4096); /* faster access */
974 dino_dev->hba.lmmio_space_offset = 0; /* CPU addrs == bus addrs */
975 spin_lock_init(&dino_dev->dinosaur_pen);
976 dino_dev->hba.iommu = ccio_get_iommu(dev);
977
978 if (is_card_dino(&dev->id)) {
979 dino_card_init(dino_dev);
980 } else {
981 dino_bridge_init(dino_dev, name);
982 }
983
984 if (dino_common_init(dev, dino_dev, name))
985 return 1;
986
987 dev->dev.platform_data = dino_dev;
988
989 /*
990 ** It's not used to avoid chicken/egg problems
991 ** with configuration accessor functions.
992 */
993 bus = pci_scan_bus_parented(&dev->dev, dino_current_bus,
994 &dino_cfg_ops, NULL);
995 if(bus) {
996 /* This code *depends* on scanning being single threaded
997 * if it isn't, this global bus number count will fail
998 */
999 dino_current_bus = bus->subordinate + 1;
1000 pci_bus_assign_resources(bus);
1001 } else {
1002 printk(KERN_ERR "ERROR: failed to scan PCI bus on %s (probably duplicate bus number %d)\n", dev->dev.bus_id, dino_current_bus);
1003 /* increment the bus number in case of duplicates */
1004 dino_current_bus++;
1005 }
1006 dino_dev->hba.hba_bus = bus;
1007 return 0;
1008}
1009
1010/*
1011 * Normally, we would just test sversion. But the Elroy PCI adapter has
1012 * the same sversion as Dino, so we have to check hversion as well.
1013 * Unfortunately, the J2240 PDC reports the wrong hversion for the first
1014 * Dino, so we have to test for Dino, Cujo and Dino-in-a-J2240.
1015 * For card-mode Dino, most machines report an sversion of 9D. But 715
1016 * and 725 firmware misreport it as 0x08080 for no adequately explained
1017 * reason.
1018 */
1019static struct parisc_device_id dino_tbl[] = {
1020 { HPHW_A_DMA, HVERSION_REV_ANY_ID, 0x004, 0x0009D },/* Card-mode Dino */
1021 { HPHW_A_DMA, HVERSION_REV_ANY_ID, HVERSION_ANY_ID, 0x08080 }, /* XXX */
1022 { HPHW_BRIDGE, HVERSION_REV_ANY_ID, 0x680, 0xa }, /* Bridge-mode Dino */
1023 { HPHW_BRIDGE, HVERSION_REV_ANY_ID, 0x682, 0xa }, /* Bridge-mode Cujo */
1024 { HPHW_BRIDGE, HVERSION_REV_ANY_ID, 0x05d, 0xa }, /* Dino in a J2240 */
1025 { 0, }
1026};
1027
1028static struct parisc_driver dino_driver = {
1029 .name = "Dino",
1030 .id_table = dino_tbl,
1031 .probe = dino_driver_callback,
1032};
1033
1034/*
1035 * One time initialization to let the world know Dino is here.
1036 * This is the only routine which is NOT static.
1037 * Must be called exactly once before pci_init().
1038 */
1039int __init dino_init(void)
1040{
1041 register_parisc_driver(&dino_driver);
1042 return 0;
1043}
1044