Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 169 insertions, 0 deletions

diff --git a/drivers/parisc/Kconfig b/drivers/parisc/Kconfig
new file mode 100644
index 000000000000..3f5de867acd7
--- /dev/null
+++ b/drivers/parisc/Kconfig
@@ -0,0 +1,169 @@
+menu "Bus options (PCI, PCMCIA, EISA, GSC, ISA)"
+
+config GSC
+        bool "VSC/GSC/HSC bus support"
+        default y
+        help
+          The VSC, GSC and HSC busses were used from the earliest 700-series
+          workstations up to and including the C360/J2240 workstations.  They
+          were also used in servers from the E-class to the K-class.  They
+          are not found in B1000, C3000, J5000, A500, L1000, N4000 and upwards.
+          If in doubt, say "Y".
+
+config HPPB
+        bool "HP-PB bus support"
+        depends on GSC
+        help
+          The HP-PB bus was used in the Nova class and K-class servers.
+          If in doubt, say "Y"
+
+config IOMMU_CCIO
+        bool "U2/Uturn I/O MMU"
+        depends on GSC
+        help
+          Say Y here to enable DMA management routines for the first
+          generation of PA-RISC cache-coherent machines.  Programs the
+          U2/Uturn chip in "Virtual Mode" and use the I/O MMU.
+
+config GSC_LASI
+        bool "Lasi I/O support"
+        depends on GSC
+        help
+          Say Y here to support the Lasi multifunction chip found in
+          many PA-RISC workstations & servers.  It includes interfaces
+          for a parallel port, serial port, NCR 53c710 SCSI, Apricot
+          Ethernet, Harmony audio, PS/2 keyboard & mouse, ISDN, telephony
+          and floppy.  Note that you must still enable all the individual
+          drivers for these chips.
+
+config GSC_WAX
+        bool "Wax I/O support"
+        depends on GSC
+        help
+          Say Y here to support the Wax multifunction chip found in some
+          older systems, including B/C/D/R class and 715/64, 715/80 and
+          715/100.  Wax includes an EISA adapter, a serial port (not always
+          used), a HIL interface chip and is also known to be used as the
+          GSC bridge for an X.25 GSC card.
+
+config EISA
+        bool "EISA support"
+        depends on GSC
+        help
+          Say Y here if you have an EISA bus in your machine.  This code
+          supports both the Mongoose & Wax EISA adapters.  It is sadly
+          incomplete and lacks support for card-to-host DMA.
+
+source "drivers/eisa/Kconfig"
+
+config ISA
+        bool "ISA support"
+        depends on EISA
+        help
+          If you want to plug an ISA card into your EISA bus, say Y here.
+          Most people should say N.
+
+config PCI
+        bool "PCI support"
+        help
+          All recent HP machines have PCI slots, and you should say Y here
+          if you have a recent machine.  If you are convinced you do not have
+          PCI slots in your machine (eg a 712), then you may say "N" here.
+          Beware that some GSC cards have a Dino onboard and PCI inside them,
+          so it may be safest to say "Y" anyway.
+
+source "drivers/pci/Kconfig"
+
+config GSC_DINO
+        bool "GSCtoPCI/Dino PCI support"
+        depends on PCI && GSC
+        help
+          Say Y here to support the Dino & Cujo GSC to PCI bridges found in
+          machines from the B132 to the C360, the J2240 and the A180.  Some
+          GSC/HSC cards (eg gigabit & dual 100 Mbit Ethernet) have a Dino on
+          the card, and you also need to say Y here if you have such a card.
+          Note that Dino also supplies one of the serial ports on certain
+          machines.  If in doubt, say Y.
+
+config PCI_LBA
+        bool "LBA/Elroy PCI support"
+        depends on PCI
+        help
+          Say Y here to support the Elroy PCI Lower Bus Adapter.  This is
+          present on B, C, J, L and N-class machines with 4-digit model
+          numbers and the A400/A500.
+
+config IOSAPIC
+        bool
+        depends on PCI_LBA
+        default PCI_LBA
+
+config IOMMU_SBA
+        bool
+        depends on PCI_LBA
+        default PCI_LBA
+
+#config PCI_EPIC
+#       bool "EPIC/SAGA PCI support"
+#       depends on PCI
+#       default y
+#       help
+#         Say Y here for V-class PCI, DMA/IOMMU, IRQ subsystem support.
+
+source "drivers/pcmcia/Kconfig"
+
+source "drivers/pci/hotplug/Kconfig"
+
+endmenu
+
+menu "PA-RISC specific drivers"
+
+config SUPERIO
+        bool "SuperIO (SuckyIO) support"
+        depends on PCI_LBA
+        default y
+        help
+          Say Y here to support the SuperIO chip found in Bxxxx, C3xxx and
+          J5xxx+ machines. This enables IDE, Floppy, Parallel Port, and
+          Serial port on those machines.
+
+config CHASSIS_LCD_LED
+        bool "Chassis LCD and LED support"
+        default y
+        help
+          Say Y here if you want to enable support for the Heartbeat,
+          Disk/Network activities LEDs on some PA-RISC machines,
+          or support for the LCD that can be found on recent material.
+        
+          This has nothing to do with LED State support for A and E class.
+        
+          If unsure, say Y.
+
+config PDC_CHASSIS
+        bool "PDC chassis State Panel support"
+        default y
+        help
+          Say Y here if you want to enable support for the LED State front
+          panel as found on E class, and support for the GSP Virtual Front
+          Panel (LED State and message logging)  as found on high end
+          servers such as A, L and N-class.
+          
+          This has nothing to do with Chassis LCD and LED support.
+          
+          If unsure, say Y.
+
+config PDC_STABLE
+        tristate "PDC Stable Storage support"
+        depends on SYSFS
+        default y
+        help
+          Say Y here if you want to enable support for accessing Stable Storage
+          variables (PDC non volatile variables such as Primary Boot Path,
+          Console Path, Autoboot, Autosearch, etc) through SysFS.
+        
+          If unsure, say Y.
+        
+          To compile this driver as a module, choose M here.
+          The module will be called pdc_stable.
+
+endmenu