can: flexcan: fix irq flooding by clearing all interrupt sources

As pointed out by Reuben Dowle and Lothar Waßmann, the TWRN_INT,
RWRN_INT, BOFF_INT interrupt sources need to be cleared as well
to avoid interrupt flooding, at least for the Flexcan on i.MX28
SOCs. Furthermore, the interrupts are only cleared, if really one
of those interrupt sources are pending (which is not the case for
rx and tx done).

Cc: Reuben Dowle <Reuben.Dowle@navico.com>
Cc: Lothar Waßmann <LW@KARO-electronics.de>
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

1 files changed, 6 insertions, 1 deletions

diff --git a/drivers/net/can/flexcan.c b/drivers/net/can/flexcan.c
index 7fd8089946fb..96d235799ec1 100644
--- a/drivers/net/can/flexcan.c
+++ b/drivers/net/can/flexcan.c
@@ -118,6 +118,9 @@
         (FLEXCAN_ESR_TWRN_INT | FLEXCAN_ESR_RWRN_INT | FLEXCAN_ESR_BOFF_INT)
 #define FLEXCAN_ESR_ERR_ALL \
         (FLEXCAN_ESR_ERR_BUS | FLEXCAN_ESR_ERR_STATE)
+#define FLEXCAN_ESR_ALL_INT \
+        (FLEXCAN_ESR_TWRN_INT | FLEXCAN_ESR_RWRN_INT | \
+         FLEXCAN_ESR_BOFF_INT | FLEXCAN_ESR_ERR_INT)
 
 /* FLEXCAN interrupt flag register (IFLAG) bits */
 #define FLEXCAN_TX_BUF_ID               8
@@ -577,7 +580,9 @@ static irqreturn_t flexcan_irq(int irq, void *dev_id)
 
         reg_iflag1 = flexcan_read(&regs->iflag1);
         reg_esr = flexcan_read(&regs->esr);
-        flexcan_write(FLEXCAN_ESR_ERR_INT, &regs->esr); /* ACK err IRQ */
+        /* ACK all bus error and state change IRQ sources */
+        if (reg_esr & FLEXCAN_ESR_ALL_INT)
+                flexcan_write(reg_esr & FLEXCAN_ESR_ALL_INT, &regs->esr);
 
         /*
          * schedule NAPI in case of: