Merge branch 'for-2.6.25' of master.kernel.org:/pub/scm/linux/kernel/git/galak/powerpc into for-2.6.25

3 files changed, 181 insertions, 305 deletions

diff --git a/drivers/net/fs_enet/fs_enet-main.c b/drivers/net/fs_enet/fs_enet-main.c
index c83bd6560088..42d94edeee26 100644
--- a/drivers/net/fs_enet/fs_enet-main.c
+++ b/drivers/net/fs_enet/fs_enet-main.c
@@ -1178,8 +1178,15 @@ static int __devinit find_phy(struct device_node *np,
         struct device_node *phynode, *mdionode;
         struct resource res;
         int ret = 0, len;
+        const u32 *data;
+
+        data  = of_get_property(np, "fixed-link", NULL);
+        if (data) {
+                snprintf(fpi->bus_id, 16, PHY_ID_FMT, 0, *data);
+                return 0;
+        }
 
-        const u32 *data = of_get_property(np, "phy-handle", &len);
+        data = of_get_property(np, "phy-handle", &len);
         if (!data || len != 4)
                 return -EINVAL;
 
diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig
index 54b2ba996640..7fe03ce774b1 100644
--- a/drivers/net/phy/Kconfig
+++ b/drivers/net/phy/Kconfig
@@ -61,34 +61,12 @@ config ICPLUS_PHY
           Currently supports the IP175C PHY.
 
 config FIXED_PHY
-        tristate "Drivers for PHY emulation on fixed speed/link"
+        bool "Driver for MDIO Bus/PHY emulation with fixed speed/link PHYs"
         ---help---
-          Adds the driver to PHY layer to cover the boards that do not have any PHY bound,
-          but with the ability to manipulate the speed/link in software. The relevant MII
-          speed/duplex parameters could be effectively handled in a user-specified function.
-          Currently tested with mpc866ads.
-
-config FIXED_MII_10_FDX
-        bool "Emulation for 10M Fdx fixed PHY behavior"
-        depends on FIXED_PHY
-
-config FIXED_MII_100_FDX
-        bool "Emulation for 100M Fdx fixed PHY behavior"
-        depends on FIXED_PHY
-
-config FIXED_MII_1000_FDX
-        bool "Emulation for 1000M Fdx fixed PHY behavior"
-        depends on FIXED_PHY
-
-config FIXED_MII_AMNT
-        int "Number of emulated PHYs to allocate "
-        depends on FIXED_PHY
-        default "1"
-        ---help---
-        Sometimes it is required to have several independent emulated
-        PHYs on the bus (in case of multi-eth but phy-less HW for instance).
-        This control will have specified number allocated for each fixed
-        PHY type enabled.
+          Adds the platform "fixed" MDIO Bus to cover the boards that use
+          PHYs that are not connected to the real MDIO bus.
+
+          Currently tested with mpc866ads and mpc8349e-mitx.
 
 config MDIO_BITBANG
         tristate "Support for bitbanged MDIO buses"
diff --git a/drivers/net/phy/fixed.c b/drivers/net/phy/fixed.c
index 56191822fa26..73b6d39ef6b0 100644
--- a/drivers/net/phy/fixed.c
+++ b/drivers/net/phy/fixed.c
@@ -1,362 +1,253 @@
 /*
- * drivers/net/phy/fixed.c
+ * Fixed MDIO bus (MDIO bus emulation with fixed PHYs)
  *
- * Driver for fixed PHYs, when transceiver is able to operate in one fixed mode.
+ * Author: Vitaly Bordug <vbordug@ru.mvista.com>
+ *         Anton Vorontsov <avorontsov@ru.mvista.com>
  *
- * Author: Vitaly Bordug
- *
- * Copyright (c) 2006 MontaVista Software, Inc.
+ * Copyright (c) 2006-2007 MontaVista Software, Inc.
  *
  * This program is free software; you can redistribute  it and/or modify it
  * under  the terms of  the GNU General  Public License as published by the
  * Free Software Foundation;  either version 2 of the  License, or (at your
  * option) any later version.
- *
  */
+
 #include <linux/kernel.h>
-#include <linux/string.h>
-#include <linux/errno.h>
-#include <linux/unistd.h>
-#include <linux/slab.h>
-#include <linux/interrupt.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/netdevice.h>
-#include <linux/etherdevice.h>
-#include <linux/skbuff.h>
-#include <linux/spinlock.h>
-#include <linux/mm.h>
 #include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/list.h>
 #include <linux/mii.h>
-#include <linux/ethtool.h>
 #include <linux/phy.h>
 #include <linux/phy_fixed.h>
 
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/uaccess.h>
+#define MII_REGS_NUM 29
 
-/* we need to track the allocated pointers in order to free them on exit */
-static struct fixed_info *fixed_phy_ptrs[CONFIG_FIXED_MII_AMNT*MAX_PHY_AMNT];
-
-/*-----------------------------------------------------------------------------
- *  If something weird is required to be done with link/speed,
- * network driver is able to assign a function to implement this.
- * May be useful for PHY's that need to be software-driven.
- *-----------------------------------------------------------------------------*/
-int fixed_mdio_set_link_update(struct phy_device *phydev,
-                               int (*link_update) (struct net_device *,
-                                                   struct fixed_phy_status *))
-{
-        struct fixed_info *fixed;
-
-        if (link_update == NULL)
-                return -EINVAL;
-
-        if (phydev) {
-                if (phydev->bus) {
-                        fixed = phydev->bus->priv;
-                        fixed->link_update = link_update;
-                        return 0;
-                }
-        }
-        return -EINVAL;
-}
-
-EXPORT_SYMBOL(fixed_mdio_set_link_update);
+struct fixed_mdio_bus {
+        int irqs[PHY_MAX_ADDR];
+        struct mii_bus mii_bus;
+        struct list_head phys;
+};
 
-struct fixed_info *fixed_mdio_get_phydev (int phydev_ind)
-{
-        if (phydev_ind >= MAX_PHY_AMNT)
-                return NULL;
-        return fixed_phy_ptrs[phydev_ind];
-}
+struct fixed_phy {
+        int id;
+        u16 regs[MII_REGS_NUM];
+        struct phy_device *phydev;
+        struct fixed_phy_status status;
+        int (*link_update)(struct net_device *, struct fixed_phy_status *);
+        struct list_head node;
+};
 
-EXPORT_SYMBOL(fixed_mdio_get_phydev);
+static struct platform_device *pdev;
+static struct fixed_mdio_bus platform_fmb = {
+        .phys = LIST_HEAD_INIT(platform_fmb.phys),
+};
 
-/*-----------------------------------------------------------------------------
- *  This is used for updating internal mii regs from the status
- *-----------------------------------------------------------------------------*/
-#if defined(CONFIG_FIXED_MII_100_FDX) || defined(CONFIG_FIXED_MII_10_FDX) || defined(CONFIG_FIXED_MII_1000_FDX)
-static int fixed_mdio_update_regs(struct fixed_info *fixed)
+static int fixed_phy_update_regs(struct fixed_phy *fp)
 {
-        u16 *regs = fixed->regs;
-        u16 bmsr = 0;
+        u16 bmsr = BMSR_ANEGCAPABLE;
         u16 bmcr = 0;
+        u16 lpagb = 0;
+        u16 lpa = 0;
 
-        if (!regs) {
-                printk(KERN_ERR "%s: regs not set up", __FUNCTION__);
-                return -EINVAL;
-        }
-
-        if (fixed->phy_status.link)
-                bmsr |= BMSR_LSTATUS;
-
-        if (fixed->phy_status.duplex) {
+        if (fp->status.duplex) {
                 bmcr |= BMCR_FULLDPLX;
 
-                switch (fixed->phy_status.speed) {
+                switch (fp->status.speed) {
+                case 1000:
+                        bmsr |= BMSR_ESTATEN;
+                        bmcr |= BMCR_SPEED1000;
+                        lpagb |= LPA_1000FULL;
+                        break;
                 case 100:
                         bmsr |= BMSR_100FULL;
                         bmcr |= BMCR_SPEED100;
+                        lpa |= LPA_100FULL;
                         break;
-
                 case 10:
                         bmsr |= BMSR_10FULL;
+                        lpa |= LPA_10FULL;
                         break;
+                default:
+                        printk(KERN_WARNING "fixed phy: unknown speed\n");
+                        return -EINVAL;
                 }
         } else {
-                switch (fixed->phy_status.speed) {
+                switch (fp->status.speed) {
+                case 1000:
+                        bmsr |= BMSR_ESTATEN;
+                        bmcr |= BMCR_SPEED1000;
+                        lpagb |= LPA_1000HALF;
+                        break;
                 case 100:
                         bmsr |= BMSR_100HALF;
                         bmcr |= BMCR_SPEED100;
+                        lpa |= LPA_100HALF;
                         break;
-
                 case 10:
-                        bmsr |= BMSR_100HALF;
+                        bmsr |= BMSR_10HALF;
+                        lpa |= LPA_10HALF;
                         break;
+                default:
+                        printk(KERN_WARNING "fixed phy: unknown speed\n");
+                        return -EINVAL;
                 }
         }
 
-        regs[MII_BMCR] = bmcr;
-        regs[MII_BMSR] = bmsr | 0x800;  /*we are always capable of 10 hdx */
+        if (fp->status.link)
+                bmsr |= BMSR_LSTATUS | BMSR_ANEGCOMPLETE;
+
+        if (fp->status.pause)
+                lpa |= LPA_PAUSE_CAP;
+
+        if (fp->status.asym_pause)
+                lpa |= LPA_PAUSE_ASYM;
+
+        fp->regs[MII_PHYSID1] = fp->id >> 16;
+        fp->regs[MII_PHYSID2] = fp->id;
+
+        fp->regs[MII_BMSR] = bmsr;
+        fp->regs[MII_BMCR] = bmcr;
+        fp->regs[MII_LPA] = lpa;
+        fp->regs[MII_STAT1000] = lpagb;
 
         return 0;
 }
 
-static int fixed_mii_read(struct mii_bus *bus, int phy_id, int location)
+static int fixed_mdio_read(struct mii_bus *bus, int phy_id, int reg_num)
 {
-        struct fixed_info *fixed = bus->priv;
-
-        /* if user has registered link update callback, use it */
-        if (fixed->phydev)
-                if (fixed->phydev->attached_dev) {
-                        if (fixed->link_update) {
-                                fixed->link_update(fixed->phydev->attached_dev,
-                                                   &fixed->phy_status);
-                                fixed_mdio_update_regs(fixed);
+        struct fixed_mdio_bus *fmb = container_of(bus, struct fixed_mdio_bus,
+                                                  mii_bus);
+        struct fixed_phy *fp;
+
+        if (reg_num >= MII_REGS_NUM)
+                return -1;
+
+        list_for_each_entry(fp, &fmb->phys, node) {
+                if (fp->id == phy_id) {
+                        /* Issue callback if user registered it. */
+                        if (fp->link_update) {
+                                fp->link_update(fp->phydev->attached_dev,
+                                                &fp->status);
+                                fixed_phy_update_regs(fp);
                         }
+                        return fp->regs[reg_num];
                 }
+        }
 
-        if ((unsigned int)location >= fixed->regs_num)
-                return -1;
-        return fixed->regs[location];
+        return 0xFFFF;
 }
 
-static int fixed_mii_write(struct mii_bus *bus, int phy_id, int location,
-                           u16 val)
+static int fixed_mdio_write(struct mii_bus *bus, int phy_id, int reg_num,
+                            u16 val)
 {
-        /* do nothing for now */
         return 0;
 }
 
-static int fixed_mii_reset(struct mii_bus *bus)
+/*
+ * If something weird is required to be done with link/speed,
+ * network driver is able to assign a function to implement this.
+ * May be useful for PHY's that need to be software-driven.
+ */
+int fixed_phy_set_link_update(struct phy_device *phydev,
+                              int (*link_update)(struct net_device *,
+                                                 struct fixed_phy_status *))
 {
-        /*nothing here - no way/need to reset it */
-        return 0;
-}
-#endif
+        struct fixed_mdio_bus *fmb = &platform_fmb;
+        struct fixed_phy *fp;
 
-static int fixed_config_aneg(struct phy_device *phydev)
-{
-        /* :TODO:03/13/2006 09:45:37 PM::
-           The full autoneg funcionality can be emulated,
-           but no need to have anything here for now
-         */
-        return 0;
-}
+        if (!link_update || !phydev || !phydev->bus)
+                return -EINVAL;
 
-/*-----------------------------------------------------------------------------
- * the manual bind will do the magic - with phy_id_mask == 0
- * match will never return true...
- *-----------------------------------------------------------------------------*/
-static struct phy_driver fixed_mdio_driver = {
-        .name = "Fixed PHY",
-#ifdef CONFIG_FIXED_MII_1000_FDX
-        .features = PHY_GBIT_FEATURES,
-#else
-        .features = PHY_BASIC_FEATURES,
-#endif
-        .config_aneg = fixed_config_aneg,
-        .read_status = genphy_read_status,
-        .driver = { .owner = THIS_MODULE, },
-};
+        list_for_each_entry(fp, &fmb->phys, node) {
+                if (fp->id == phydev->phy_id) {
+                        fp->link_update = link_update;
+                        fp->phydev = phydev;
+                        return 0;
+                }
+        }
 
-static void fixed_mdio_release(struct device *dev)
-{
-        struct phy_device *phydev = container_of(dev, struct phy_device, dev);
-        struct mii_bus *bus = phydev->bus;
-        struct fixed_info *fixed = bus->priv;
-
-        kfree(phydev);
-        kfree(bus->dev);
-        kfree(bus);
-        kfree(fixed->regs);
-        kfree(fixed);
+        return -ENOENT;
 }
+EXPORT_SYMBOL_GPL(fixed_phy_set_link_update);
 
-/*-----------------------------------------------------------------------------
- *  This func is used to create all the necessary stuff, bind
- * the fixed phy driver and register all it on the mdio_bus_type.
- * speed is either 10 or 100 or 1000, duplex is boolean.
- * number is used to create multiple fixed PHYs, so that several devices can
- * utilize them simultaneously.
- *
- * The device on mdio bus will look like [bus_id]:[phy_id],
- * bus_id = number
- * phy_id = speed+duplex.
- *-----------------------------------------------------------------------------*/
-#if defined(CONFIG_FIXED_MII_100_FDX) || defined(CONFIG_FIXED_MII_10_FDX) || defined(CONFIG_FIXED_MII_1000_FDX)
-struct fixed_info *fixed_mdio_register_device(
-        int bus_id, int speed, int duplex, u8 phy_id)
+int fixed_phy_add(unsigned int irq, int phy_id,
+                  struct fixed_phy_status *status)
 {
-        struct mii_bus *new_bus;
-        struct fixed_info *fixed;
-        struct phy_device *phydev;
-        int err;
+        int ret;
+        struct fixed_mdio_bus *fmb = &platform_fmb;
+        struct fixed_phy *fp;
 
-        struct device *dev = kzalloc(sizeof(struct device), GFP_KERNEL);
+        fp = kzalloc(sizeof(*fp), GFP_KERNEL);
+        if (!fp)
+                return -ENOMEM;
 
-        if (dev == NULL)
-                goto err_dev_alloc;
+        memset(fp->regs, 0xFF,  sizeof(fp->regs[0]) * MII_REGS_NUM);
 
-        new_bus = kzalloc(sizeof(struct mii_bus), GFP_KERNEL);
+        fmb->irqs[phy_id] = irq;
 
-        if (new_bus == NULL)
-                goto err_bus_alloc;
+        fp->id = phy_id;
+        fp->status = *status;
 
-        fixed = kzalloc(sizeof(struct fixed_info), GFP_KERNEL);
+        ret = fixed_phy_update_regs(fp);
+        if (ret)
+                goto err_regs;
 
-        if (fixed == NULL)
-                goto err_fixed_alloc;
+        list_add_tail(&fp->node, &fmb->phys);
 
-        fixed->regs = kzalloc(MII_REGS_NUM * sizeof(int), GFP_KERNEL);
-        if (NULL == fixed->regs)
-                goto err_fixed_regs_alloc;
+        return 0;
 
-        fixed->regs_num = MII_REGS_NUM;
-        fixed->phy_status.speed = speed;
-        fixed->phy_status.duplex = duplex;
-        fixed->phy_status.link = 1;
+err_regs:
+        kfree(fp);
+        return ret;
+}
+EXPORT_SYMBOL_GPL(fixed_phy_add);
 
-        new_bus->name = "Fixed MII Bus";
-        new_bus->read = &fixed_mii_read;
-        new_bus->write = &fixed_mii_write;
-        new_bus->reset = &fixed_mii_reset;
-        /*set up workspace */
-        fixed_mdio_update_regs(fixed);
-        new_bus->priv = fixed;
+static int __init fixed_mdio_bus_init(void)
+{
+        struct fixed_mdio_bus *fmb = &platform_fmb;
+        int ret;
 
-        new_bus->dev = dev;
-        dev_set_drvdata(dev, new_bus);
+        pdev = platform_device_register_simple("Fixed MDIO bus", 0, NULL, 0);
+        if (!pdev) {
+                ret = -ENOMEM;
+                goto err_pdev;
+        }
 
-        /* create phy_device and register it on the mdio bus */
-        phydev = phy_device_create(new_bus, 0, 0);
-        if (phydev == NULL)
-                goto err_phy_dev_create;
+        fmb->mii_bus.id = 0;
+        fmb->mii_bus.name = "Fixed MDIO Bus";
+        fmb->mii_bus.dev = &pdev->dev;
+        fmb->mii_bus.read = &fixed_mdio_read;
+        fmb->mii_bus.write = &fixed_mdio_write;
+        fmb->mii_bus.irq = fmb->irqs;
 
-        /*
-         * Put the phydev pointer into the fixed pack so that bus read/write
-         * code could be able to access for instance attached netdev. Well it
-         * doesn't have to do so, only in case of utilizing user-specified
-         * link-update...
-         */
+        ret = mdiobus_register(&fmb->mii_bus);
+        if (ret)
+                goto err_mdiobus_reg;
 
-        fixed->phydev = phydev;
-        phydev->speed = speed;
-        phydev->duplex = duplex;
+        return 0;
 
-        phydev->irq = PHY_IGNORE_INTERRUPT;
-        phydev->dev.bus = &mdio_bus_type;
+err_mdiobus_reg:
+        platform_device_unregister(pdev);
+err_pdev:
+        return ret;
+}
+module_init(fixed_mdio_bus_init);
 
-        snprintf(phydev->dev.bus_id, BUS_ID_SIZE,
-                 PHY_ID_FMT, bus_id, phy_id);
+static void __exit fixed_mdio_bus_exit(void)
+{
+        struct fixed_mdio_bus *fmb = &platform_fmb;
+        struct fixed_phy *fp;
 
-        phydev->bus = new_bus;
+        mdiobus_unregister(&fmb->mii_bus);
+        platform_device_unregister(pdev);
 
-        phydev->dev.driver = &fixed_mdio_driver.driver;
-        phydev->dev.release = fixed_mdio_release;
-        err = phydev->dev.driver->probe(&phydev->dev);
-        if (err < 0) {
-                printk(KERN_ERR "Phy %s: problems with fixed driver\n",
-                       phydev->dev.bus_id);
-                goto err_out;
-        }
-        err = device_register(&phydev->dev);
-        if (err) {
-                printk(KERN_ERR "Phy %s failed to register\n",
-                       phydev->dev.bus_id);
-                goto err_out;
+        list_for_each_entry(fp, &fmb->phys, node) {
+                list_del(&fp->node);
+                kfree(fp);
         }
-        //phydev->state = PHY_RUNNING; /* make phy go up quick, but in 10Mbit/HDX
-        return fixed;
-
-err_out:
-        kfree(phydev);
-err_phy_dev_create:
-        kfree(fixed->regs);
-err_fixed_regs_alloc:
-        kfree(fixed);
-err_fixed_alloc:
-        kfree(new_bus);
-err_bus_alloc:
-        kfree(dev);
-err_dev_alloc:
-
-        return NULL;
-
 }
-#endif
+module_exit(fixed_mdio_bus_exit);
 
-MODULE_DESCRIPTION("Fixed PHY device & driver for PAL");
+MODULE_DESCRIPTION("Fixed MDIO bus (MDIO bus emulation with fixed PHYs)");
 MODULE_AUTHOR("Vitaly Bordug");
 MODULE_LICENSE("GPL");
-
-static int __init fixed_init(void)
-{
-        int cnt = 0;
-        int i;
-/* register on the bus... Not expected to be matched
- * with anything there...
- *
- */
-        phy_driver_register(&fixed_mdio_driver);
-
-/* We will create several mdio devices here, and will bound the upper
- * driver to them.
- *
- * Then the external software can lookup the phy bus by searching
- * for 0:101, to be connected to the virtual 100M Fdx phy.
- *
- * In case several virtual PHYs required, the bus_id will be in form
- * [num]:[duplex]+[speed], which make it able even to define
- * driver-specific link control callback, if for instance PHY is
- * completely SW-driven.
- */
-        for (i=1; i <= CONFIG_FIXED_MII_AMNT; i++) {
-#ifdef CONFIG_FIXED_MII_1000_FDX
-                fixed_phy_ptrs[cnt++] = fixed_mdio_register_device(0, 1000, 1, i);
-#endif
-#ifdef CONFIG_FIXED_MII_100_FDX
-                fixed_phy_ptrs[cnt++] = fixed_mdio_register_device(1, 100, 1, i);
-#endif
-#ifdef CONFIG_FIXED_MII_10_FDX
-                fixed_phy_ptrs[cnt++] = fixed_mdio_register_device(2, 10, 1, i);
-#endif
-        }
-
-        return 0;
-}
-
-static void __exit fixed_exit(void)
-{
-        int i;
-
-        phy_driver_unregister(&fixed_mdio_driver);
-        for (i=0; i < MAX_PHY_AMNT; i++)
-                if ( fixed_phy_ptrs[i] )
-                        device_unregister(&fixed_phy_ptrs[i]->phydev->dev);
-}
-
-module_init(fixed_init);
-module_exit(fixed_exit);