b43: Convert to use of the new SPROM structure

The b43 driver is modified to use the new SPROM structure.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

6 files changed, 55 insertions, 56 deletions

diff --git a/drivers/net/wireless/b43/leds.c b/drivers/net/wireless/b43/leds.c
index e04eba1f9308..4b590d8c65ff 100644
--- a/drivers/net/wireless/b43/leds.c
+++ b/drivers/net/wireless/b43/leds.c
@@ -190,10 +190,10 @@ void b43_leds_init(struct b43_wldev *dev)
         enum b43_led_behaviour behaviour;
         bool activelow;
 
-        sprom[0] = bus->sprom.r1.gpio0;
-        sprom[1] = bus->sprom.r1.gpio1;
-        sprom[2] = bus->sprom.r1.gpio2;
-        sprom[3] = bus->sprom.r1.gpio3;
+        sprom[0] = bus->sprom.gpio0;
+        sprom[1] = bus->sprom.gpio1;
+        sprom[2] = bus->sprom.gpio2;
+        sprom[3] = bus->sprom.gpio3;
 
         for (i = 0; i < 4; i++) {
                 if (sprom[i] == 0xFF) {
diff --git a/drivers/net/wireless/b43/lo.c b/drivers/net/wireless/b43/lo.c
index 0a50fd584c19..88f35e67e226 100644
--- a/drivers/net/wireless/b43/lo.c
+++ b/drivers/net/wireless/b43/lo.c
@@ -264,8 +264,8 @@ static u16 lo_measure_feedthrough(struct b43_wldev *dev,
                 rfover |= pga;
                 rfover |= lna;
                 rfover |= trsw_rx;
-                if ((dev->dev->bus->sprom.r1.boardflags_lo & B43_BFL_EXTLNA) &&
-                    phy->rev > 6)
+                if ((dev->dev->bus->sprom.boardflags_lo & B43_BFL_EXTLNA)
+                    && phy->rev > 6)
                         rfover |= B43_PHY_RFOVERVAL_EXTLNA;
 
                 b43_phy_write(dev, B43_PHY_PGACTL, 0xE300);
@@ -634,7 +634,7 @@ static void lo_measure_setup(struct b43_wldev *dev,
                               & 0xFFFC);
                 if (phy->type == B43_PHYTYPE_G) {
                         if ((phy->rev >= 7) &&
-                            (sprom->r1.boardflags_lo & B43_BFL_EXTLNA)) {
+                            (sprom->boardflags_lo & B43_BFL_EXTLNA)) {
                                 b43_phy_write(dev, B43_PHY_RFOVER, 0x933);
                         } else {
                                 b43_phy_write(dev, B43_PHY_RFOVER, 0x133);
diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c
index 72321d802f1d..16b413d11d19 100644
--- a/drivers/net/wireless/b43/main.c
+++ b/drivers/net/wireless/b43/main.c
@@ -1924,7 +1924,7 @@ static int b43_gpio_init(struct b43_wldev *dev)
                 mask |= 0x0180;
                 set |= 0x0180;
         }
-        if (dev->dev->bus->sprom.r1.boardflags_lo & B43_BFL_PACTRL) {
+        if (dev->dev->bus->sprom.boardflags_lo & B43_BFL_PACTRL) {
                 b43_write16(dev, B43_MMIO_GPIO_MASK,
                             b43_read16(dev, B43_MMIO_GPIO_MASK)
                             | 0x0200);
@@ -2289,7 +2289,7 @@ static void b43_periodic_every60sec(struct b43_wldev *dev)
 
         if (!b43_has_hardware_pctl(phy))
                 b43_lo_g_ctl_mark_all_unused(dev);
-        if (dev->dev->bus->sprom.r1.boardflags_lo & B43_BFL_RSSI) {
+        if (dev->dev->bus->sprom.boardflags_lo & B43_BFL_RSSI) {
                 b43_mac_suspend(dev);
                 b43_calc_nrssi_slope(dev);
                 if ((phy->radio_ver == 0x2050) && (phy->radio_rev == 8)) {
@@ -3208,13 +3208,13 @@ static void b43_bluetooth_coext_enable(struct b43_wldev *dev)
         struct ssb_sprom *sprom = &dev->dev->bus->sprom;
         u32 hf;
 
-        if (!(sprom->r1.boardflags_lo & B43_BFL_BTCOEXIST))
+        if (!(sprom->boardflags_lo & B43_BFL_BTCOEXIST))
                 return;
         if (dev->phy.type != B43_PHYTYPE_B && !dev->phy.gmode)
                 return;
 
         hf = b43_hf_read(dev);
-        if (sprom->r1.boardflags_lo & B43_BFL_BTCMOD)
+        if (sprom->boardflags_lo & B43_BFL_BTCMOD)
                 hf |= B43_HF_BTCOEXALT;
         else
                 hf |= B43_HF_BTCOEX;
@@ -3345,7 +3345,7 @@ static int b43_wireless_core_init(struct b43_wldev *dev)
                 hf |= B43_HF_SYMW;
                 if (phy->rev == 1)
                         hf |= B43_HF_GDCW;
-                if (sprom->r1.boardflags_lo & B43_BFL_PACTRL)
+                if (sprom->boardflags_lo & B43_BFL_PACTRL)
                         hf |= B43_HF_OFDMPABOOST;
         } else if (phy->type == B43_PHYTYPE_B) {
                 hf |= B43_HF_SYMW;
@@ -3862,20 +3862,20 @@ static void b43_sprom_fixup(struct ssb_bus *bus)
         /* boardflags workarounds */
         if (bus->boardinfo.vendor == SSB_BOARDVENDOR_DELL &&
             bus->chip_id == 0x4301 && bus->boardinfo.rev == 0x74)
-                bus->sprom.r1.boardflags_lo |= B43_BFL_BTCOEXIST;
+                bus->sprom.boardflags_lo |= B43_BFL_BTCOEXIST;
         if (bus->boardinfo.vendor == PCI_VENDOR_ID_APPLE &&
             bus->boardinfo.type == 0x4E && bus->boardinfo.rev > 0x40)
-                bus->sprom.r1.boardflags_lo |= B43_BFL_PACTRL;
+                bus->sprom.boardflags_lo |= B43_BFL_PACTRL;
 
         /* Handle case when gain is not set in sprom */
-        if (bus->sprom.r1.antenna_gain_a == 0xFF)
-                bus->sprom.r1.antenna_gain_a = 2;
-        if (bus->sprom.r1.antenna_gain_bg == 0xFF)
-                bus->sprom.r1.antenna_gain_bg = 2;
+        if (bus->sprom.antenna_gain_a == 0xFF)
+                bus->sprom.antenna_gain_a = 2;
+        if (bus->sprom.antenna_gain_bg == 0xFF)
+                bus->sprom.antenna_gain_bg = 2;
 
         /* Convert Antennagain values to Q5.2 */
-        bus->sprom.r1.antenna_gain_a <<= 2;
-        bus->sprom.r1.antenna_gain_bg <<= 2;
+        bus->sprom.antenna_gain_a <<= 2;
+        bus->sprom.antenna_gain_bg <<= 2;
 }
 
 static void b43_wireless_exit(struct ssb_device *dev, struct b43_wl *wl)
@@ -3908,10 +3908,10 @@ static int b43_wireless_init(struct ssb_device *dev)
         hw->max_noise = -110;
         hw->queues = 1;         /* FIXME: hardware has more queues */
         SET_IEEE80211_DEV(hw, dev->dev);
-        if (is_valid_ether_addr(sprom->r1.et1mac))
-                SET_IEEE80211_PERM_ADDR(hw, sprom->r1.et1mac);
+        if (is_valid_ether_addr(sprom->et1mac))
+                SET_IEEE80211_PERM_ADDR(hw, sprom->et1mac);
         else
-                SET_IEEE80211_PERM_ADDR(hw, sprom->r1.il0mac);
+                SET_IEEE80211_PERM_ADDR(hw, sprom->il0mac);
 
         /* Get and initialize struct b43_wl */
         wl = hw_to_b43_wl(hw);
diff --git a/drivers/net/wireless/b43/phy.c b/drivers/net/wireless/b43/phy.c
index 7eb71d73663c..facc01c25f90 100644
--- a/drivers/net/wireless/b43/phy.c
+++ b/drivers/net/wireless/b43/phy.c
@@ -903,7 +903,7 @@ static void b43_phy_inita(struct b43_wldev *dev)
         }
 
         if ((phy->type == B43_PHYTYPE_G) &&
-            (dev->dev->bus->sprom.r1.boardflags_lo & B43_BFL_PACTRL)) {
+            (dev->dev->bus->sprom.boardflags_lo & B43_BFL_PACTRL)) {
                 b43_phy_write(dev, B43_PHY_OFDM(0x6E),
                                   (b43_phy_read(dev, B43_PHY_OFDM(0x6E))
                                    & 0xE000) | 0x3CF);
@@ -1006,7 +1006,7 @@ static void b43_phy_initb4(struct b43_wldev *dev)
         if (phy->radio_ver == 0x2050)
                 b43_phy_write(dev, 0x002A, 0x88C2);
         b43_set_txpower_g(dev, &phy->bbatt, &phy->rfatt, phy->tx_control);
-        if (dev->dev->bus->sprom.r1.boardflags_lo & B43_BFL_RSSI) {
+        if (dev->dev->bus->sprom.boardflags_lo & B43_BFL_RSSI) {
                 b43_calc_nrssi_slope(dev);
                 b43_calc_nrssi_threshold(dev);
         }
@@ -1153,7 +1153,7 @@ static void b43_phy_initb6(struct b43_wldev *dev)
                 b43_radio_write16(dev, 0x5A, 0x88);
                 b43_radio_write16(dev, 0x5B, 0x6B);
                 b43_radio_write16(dev, 0x5C, 0x0F);
-                if (dev->dev->bus->sprom.r1.boardflags_lo & B43_BFL_ALTIQ) {
+                if (dev->dev->bus->sprom.boardflags_lo & B43_BFL_ALTIQ) {
                         b43_radio_write16(dev, 0x5D, 0xFA);
                         b43_radio_write16(dev, 0x5E, 0xD8);
                 } else {
@@ -1245,7 +1245,7 @@ static void b43_phy_initb6(struct b43_wldev *dev)
                 b43_phy_write(dev, 0x0062, 0x0007);
                 b43_radio_init2050(dev);
                 b43_lo_g_measure(dev);
-                if (dev->dev->bus->sprom.r1.boardflags_lo & B43_BFL_RSSI) {
+                if (dev->dev->bus->sprom.boardflags_lo & B43_BFL_RSSI) {
                         b43_calc_nrssi_slope(dev);
                         b43_calc_nrssi_threshold(dev);
                 }
@@ -1365,7 +1365,7 @@ static void b43_calc_loopback_gain(struct b43_wldev *dev)
         b43_phy_write(dev, B43_PHY_RFOVERVAL,
                       b43_phy_read(dev, B43_PHY_RFOVERVAL) & 0xCFFF);
 
-        if (dev->dev->bus->sprom.r1.boardflags_lo & B43_BFL_EXTLNA) {
+        if (dev->dev->bus->sprom.boardflags_lo & B43_BFL_EXTLNA) {
                 if (phy->rev >= 7) {
                         b43_phy_write(dev, B43_PHY_RFOVER,
                                       b43_phy_read(dev, B43_PHY_RFOVER)
@@ -1532,7 +1532,7 @@ static void b43_phy_initg(struct b43_wldev *dev)
                                        & 0x0FFF) | (phy->lo_control->
                                                     tx_bias << 12));
                 }
-                if (dev->dev->bus->sprom.r1.boardflags_lo & B43_BFL_PACTRL)
+                if (dev->dev->bus->sprom.boardflags_lo & B43_BFL_PACTRL)
                         b43_phy_write(dev, B43_PHY_BASE(0x2E), 0x8075);
                 else
                         b43_phy_write(dev, B43_PHY_BASE(0x2E), 0x807F);
@@ -1546,7 +1546,7 @@ static void b43_phy_initg(struct b43_wldev *dev)
                 b43_phy_write(dev, B43_PHY_LO_MASK, 0x8078);
         }
 
-        if (!(dev->dev->bus->sprom.r1.boardflags_lo & B43_BFL_RSSI)) {
+        if (!(dev->dev->bus->sprom.boardflags_lo & B43_BFL_RSSI)) {
                 /* The specs state to update the NRSSI LT with
                  * the value 0x7FFFFFFF here. I think that is some weird
                  * compiler optimization in the original driver.
@@ -1756,16 +1756,15 @@ void b43_phy_xmitpower(struct b43_wldev *dev)
                         estimated_pwr =
                             b43_phy_estimate_power_out(dev, average);
 
-                        max_pwr = dev->dev->bus->sprom.r1.maxpwr_bg;
-                        if ((dev->dev->bus->sprom.r1.
-                             boardflags_lo & B43_BFL_PACTRL)
-                            && (phy->type == B43_PHYTYPE_G))
+                        max_pwr = dev->dev->bus->sprom.maxpwr_bg;
+                        if ((dev->dev->bus->sprom.boardflags_lo
+                            & B43_BFL_PACTRL) && (phy->type == B43_PHYTYPE_G))
                                 max_pwr -= 0x3;
                         if (unlikely(max_pwr <= 0)) {
                                 b43warn(dev->wl,
                                         "Invalid max-TX-power value in SPROM.\n");
                                 max_pwr = 60;   /* fake it */
-                                dev->dev->bus->sprom.r1.maxpwr_bg = max_pwr;
+                                dev->dev->bus->sprom.maxpwr_bg = max_pwr;
                         }
 
                         /*TODO:
@@ -1823,7 +1822,7 @@ void b43_phy_xmitpower(struct b43_wldev *dev)
                                                     B43_TXCTL_TXMIX;
                                                 rfatt += 2;
                                                 bbatt += 2;
-                                        } else if (dev->dev->bus->sprom.r1.
+                                        } else if (dev->dev->bus->sprom.
                                                    boardflags_lo &
                                                    B43_BFL_PACTRL) {
                                                 bbatt += 4 * (rfatt - 2);
@@ -1899,13 +1898,13 @@ int b43_phy_init_tssi2dbm_table(struct b43_wldev *dev)
         s8 *dyn_tssi2dbm;
 
         if (phy->type == B43_PHYTYPE_A) {
-                pab0 = (s16) (dev->dev->bus->sprom.r1.pa1b0);
-                pab1 = (s16) (dev->dev->bus->sprom.r1.pa1b1);
-                pab2 = (s16) (dev->dev->bus->sprom.r1.pa1b2);
+                pab0 = (s16) (dev->dev->bus->sprom.pa1b0);
+                pab1 = (s16) (dev->dev->bus->sprom.pa1b1);
+                pab2 = (s16) (dev->dev->bus->sprom.pa1b2);
         } else {
-                pab0 = (s16) (dev->dev->bus->sprom.r1.pa0b0);
-                pab1 = (s16) (dev->dev->bus->sprom.r1.pa0b1);
-                pab2 = (s16) (dev->dev->bus->sprom.r1.pa0b2);
+                pab0 = (s16) (dev->dev->bus->sprom.pa0b0);
+                pab1 = (s16) (dev->dev->bus->sprom.pa0b1);
+                pab2 = (s16) (dev->dev->bus->sprom.pa0b2);
         }
 
         if ((dev->dev->bus->chip_id == 0x4301) && (phy->radio_ver != 0x2050)) {
@@ -1918,17 +1917,17 @@ int b43_phy_init_tssi2dbm_table(struct b43_wldev *dev)
             pab0 != -1 && pab1 != -1 && pab2 != -1) {
                 /* The pabX values are set in SPROM. Use them. */
                 if (phy->type == B43_PHYTYPE_A) {
-                        if ((s8) dev->dev->bus->sprom.r1.itssi_a != 0 &&
-                            (s8) dev->dev->bus->sprom.r1.itssi_a != -1)
+                        if ((s8) dev->dev->bus->sprom.itssi_a != 0 &&
+                            (s8) dev->dev->bus->sprom.itssi_a != -1)
                                 phy->tgt_idle_tssi =
-                                    (s8) (dev->dev->bus->sprom.r1.itssi_a);
+                                    (s8) (dev->dev->bus->sprom.itssi_a);
                         else
                                 phy->tgt_idle_tssi = 62;
                 } else {
-                        if ((s8) dev->dev->bus->sprom.r1.itssi_bg != 0 &&
-                            (s8) dev->dev->bus->sprom.r1.itssi_bg != -1)
+                        if ((s8) dev->dev->bus->sprom.itssi_bg != 0 &&
+                            (s8) dev->dev->bus->sprom.itssi_bg != -1)
                                 phy->tgt_idle_tssi =
-                                    (s8) (dev->dev->bus->sprom.r1.itssi_bg);
+                                    (s8) (dev->dev->bus->sprom.itssi_bg);
                         else
                                 phy->tgt_idle_tssi = 62;
                 }
@@ -2834,7 +2833,7 @@ void b43_calc_nrssi_threshold(struct b43_wldev *dev)
                         if (phy->radio_ver != 0x2050)
                                 return;
                         if (!
-                            (dev->dev->bus->sprom.r1.
+                            (dev->dev->bus->sprom.
                              boardflags_lo & B43_BFL_RSSI))
                                 return;
 
@@ -2865,7 +2864,7 @@ void b43_calc_nrssi_threshold(struct b43_wldev *dev)
                 }
         case B43_PHYTYPE_G:
                 if (!phy->gmode ||
-                    !(dev->dev->bus->sprom.r1.boardflags_lo & B43_BFL_RSSI)) {
+                    !(dev->dev->bus->sprom.boardflags_lo & B43_BFL_RSSI)) {
                         tmp16 = b43_nrssi_hw_read(dev, 0x20);
                         if (tmp16 >= 0x20)
                                 tmp16 -= 0x40;
@@ -3387,7 +3386,7 @@ static u16 radio2050_rfover_val(struct b43_wldev *dev,
                 }
 
                 if ((phy->rev < 7) ||
-                    !(sprom->r1.boardflags_lo & B43_BFL_EXTLNA)) {
+                    !(sprom->boardflags_lo & B43_BFL_EXTLNA)) {
                         if (phy_register == B43_PHY_RFOVER) {
                                 return 0x1B3;
                         } else if (phy_register == B43_PHY_RFOVERVAL) {
@@ -3427,7 +3426,7 @@ static u16 radio2050_rfover_val(struct b43_wldev *dev,
                 }
         } else {
                 if ((phy->rev < 7) ||
-                    !(sprom->r1.boardflags_lo & B43_BFL_EXTLNA)) {
+                    !(sprom->boardflags_lo & B43_BFL_EXTLNA)) {
                         if (phy_register == B43_PHY_RFOVER) {
                                 return 0x1B3;
                         } else if (phy_register == B43_PHY_RFOVERVAL) {
@@ -3906,7 +3905,7 @@ int b43_radio_selectchannel(struct b43_wldev *dev,
                 b43_write16(dev, B43_MMIO_CHANNEL, channel2freq_bg(channel));
 
                 if (channel == 14) {
-                        if (dev->dev->bus->sprom.r1.country_code ==
+                        if (dev->dev->bus->sprom.country_code ==
                             SSB_SPROM1CCODE_JAPAN)
                                 b43_hf_write(dev,
                                              b43_hf_read(dev) & ~B43_HF_ACPR);
diff --git a/drivers/net/wireless/b43/wa.c b/drivers/net/wireless/b43/wa.c
index b70992aa66bc..b3df1ba0e544 100644
--- a/drivers/net/wireless/b43/wa.c
+++ b/drivers/net/wireless/b43/wa.c
@@ -527,7 +527,7 @@ static void b43_wa_boards_g(struct b43_wldev *dev)
                 } else {
                         b43_ofdmtab_write16(dev, B43_OFDMTAB_GAINX, 1, 0x0002);
                         b43_ofdmtab_write16(dev, B43_OFDMTAB_GAINX, 2, 0x0001);
-                        if ((bus->sprom.r1.boardflags_lo & B43_BFL_EXTLNA) &&
+                        if ((bus->sprom.boardflags_lo & B43_BFL_EXTLNA) &&
                             (phy->rev >= 7)) {
                                 b43_phy_write(dev, B43_PHY_EXTG(0x11),
                                         b43_phy_read(dev, B43_PHY_EXTG(0x11)) & 0xF7FF);
@@ -540,7 +540,7 @@ static void b43_wa_boards_g(struct b43_wldev *dev)
                         }
                 }
         }
-        if (bus->sprom.r1.boardflags_lo & B43_BFL_FEM) {
+        if (bus->sprom.boardflags_lo & B43_BFL_FEM) {
                 b43_phy_write(dev, B43_PHY_GTABCTL, 0x3120);
                 b43_phy_write(dev, B43_PHY_GTABDATA, 0xC480);
         }
diff --git a/drivers/net/wireless/b43/xmit.c b/drivers/net/wireless/b43/xmit.c
index d36603d499fb..557abe1f1a05 100644
--- a/drivers/net/wireless/b43/xmit.c
+++ b/drivers/net/wireless/b43/xmit.c
@@ -385,7 +385,7 @@ static s8 b43_rssi_postprocess(struct b43_wldev *dev,
                         else
                                 tmp -= 3;
                 } else {
-                        if (dev->dev->bus->sprom.r1.
+                        if (dev->dev->bus->sprom.
                             boardflags_lo & B43_BFL_RSSI) {
                                 if (in_rssi > 63)
                                         in_rssi = 63;