Add missing newlines to some uses of dev_<level> messages

Found these while looking at printk uses.

Add missing newlines to dev_<level> uses
Add missing KERN_<level> prefixes to multiline dev_<level>s
Fixed a wierd->weird spelling typo
Added a newline to a printk

Signed-off-by: Joe Perches <joe@perches.com>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Jens Axboe <jens.axboe@oracle.com>
Cc: Mark M. Hoffman <mhoffman@lightlink.com>
Cc: Roland Dreier <rolandd@cisco.com>
Cc: Tilman Schmidt <tilman@imap.cc>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Jeff Garzik <jeff@garzik.org>
Cc: Stephen Hemminger <shemminger@linux-foundation.org>
Cc: Greg KH <greg@kroah.com>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: David Brownell <david-b@pacbell.net>
Cc: James Smart <James.Smart@Emulex.Com>
Cc: Andrew Vasquez <andrew.vasquez@qlogic.com>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Cc: Evgeniy Polyakov <johnpol@2ka.mipt.ru>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Jaroslav Kysela <perex@suse.cz>
Cc: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

7 files changed, 18 insertions, 17 deletions

diff --git a/drivers/net/ax88796.c b/drivers/net/ax88796.c
index 9fe0517cf893..7495a9ee8f4b 100644
--- a/drivers/net/ax88796.c
+++ b/drivers/net/ax88796.c
@@ -900,7 +900,7 @@ static int ax_probe(struct platform_device *pdev)
 
                 ax->map2 = ioremap(res->start, size);
                 if (ax->map2 == NULL) {
-                        dev_err(&pdev->dev, "cannot map reset register");
+                        dev_err(&pdev->dev, "cannot map reset register\n");
                         ret = -ENXIO;
                         goto exit_mem2;
                 }
diff --git a/drivers/net/bnx2.c b/drivers/net/bnx2.c
index 78ed633ceb82..fa0d69ab908e 100644
--- a/drivers/net/bnx2.c
+++ b/drivers/net/bnx2.c
@@ -6428,7 +6428,7 @@ bnx2_init_board(struct pci_dev *pdev, struct net_device *dev)
         /* enable device (incl. PCI PM wakeup), and bus-mastering */
         rc = pci_enable_device(pdev);
         if (rc) {
-                dev_err(&pdev->dev, "Cannot enable PCI device, aborting.");
+                dev_err(&pdev->dev, "Cannot enable PCI device, aborting.\n");
                 goto err_out;
         }
 
diff --git a/drivers/net/ehea/ehea_main.c b/drivers/net/ehea/ehea_main.c
index fe5ffac7ac57..2809c99906e0 100644
--- a/drivers/net/ehea/ehea_main.c
+++ b/drivers/net/ehea/ehea_main.c
@@ -3218,7 +3218,7 @@ static int __devinit ehea_probe_adapter(struct of_device *dev,
         /* get adapter properties */
         ret = ehea_sense_adapter_attr(adapter);
         if (ret) {
-                dev_err(&dev->dev, "sense_adapter_attr failed: %d", ret);
+                dev_err(&dev->dev, "sense_adapter_attr failed: %d\n", ret);
                 goto out_free_ad;
         }
 
@@ -3226,7 +3226,7 @@ static int __devinit ehea_probe_adapter(struct of_device *dev,
                                       EHEA_NEQ, EHEA_MAX_ENTRIES_EQ, 1);
         if (!adapter->neq) {
                 ret = -EIO;
-                dev_err(&dev->dev, "NEQ creation failed");
+                dev_err(&dev->dev, "NEQ creation failed\n");
                 goto out_free_ad;
         }
 
@@ -3237,7 +3237,7 @@ static int __devinit ehea_probe_adapter(struct of_device *dev,
                                   ehea_interrupt_neq, IRQF_DISABLED,
                                   "ehea_neq", adapter);
         if (ret) {
-                dev_err(&dev->dev, "requesting NEQ IRQ failed");
+                dev_err(&dev->dev, "requesting NEQ IRQ failed\n");
                 goto out_kill_eq;
         }
 
@@ -3247,7 +3247,7 @@ static int __devinit ehea_probe_adapter(struct of_device *dev,
 
         ret = ehea_setup_ports(adapter);
         if (ret) {
-                dev_err(&dev->dev, "setup_ports failed");
+                dev_err(&dev->dev, "setup_ports failed\n");
                 goto out_rem_dev_sysfs;
         }
 
diff --git a/drivers/net/myri10ge/myri10ge.c b/drivers/net/myri10ge/myri10ge.c
index 64c8151f2004..366e62a2b1e5 100644
--- a/drivers/net/myri10ge/myri10ge.c
+++ b/drivers/net/myri10ge/myri10ge.c
@@ -3058,7 +3058,8 @@ static int myri10ge_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
         if (status != 0) {
                 dac_enabled = 0;
                 dev_err(&pdev->dev,
-                        "64-bit pci address mask was refused, trying 32-bit");
+                        "64-bit pci address mask was refused, "
+                        "trying 32-bit\n");
                 status = pci_set_dma_mask(pdev, DMA_32BIT_MASK);
         }
         if (status != 0) {
diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c
index 7967240534d5..70d7e478a3e0 100644
--- a/drivers/net/sky2.c
+++ b/drivers/net/sky2.c
@@ -3961,7 +3961,7 @@ static __devinit struct net_device *sky2_init_netdev(struct sky2_hw *hw,
         struct net_device *dev = alloc_etherdev(sizeof(*sky2));
 
         if (!dev) {
-                dev_err(&hw->pdev->dev, "etherdev alloc failed");
+                dev_err(&hw->pdev->dev, "etherdev alloc failed\n");
                 return NULL;
         }
 
diff --git a/drivers/net/usb/mcs7830.c b/drivers/net/usb/mcs7830.c
index 6240b978fe3d..f55a5951733a 100644
--- a/drivers/net/usb/mcs7830.c
+++ b/drivers/net/usb/mcs7830.c
@@ -114,8 +114,8 @@ static void mcs7830_async_cmd_callback(struct urb *urb)
         struct usb_ctrlrequest *req = (struct usb_ctrlrequest *)urb->context;
 
         if (urb->status < 0)
-                printk(KERN_DEBUG "mcs7830_async_cmd_callback() failed with %d",
-                        urb->status);
+                printk(KERN_DEBUG "%s() failed with %d\n",
+                       __FUNCTION__, urb->status);
 
         kfree(req);
         usb_free_urb(urb);
@@ -129,15 +129,15 @@ static void mcs7830_set_reg_async(struct usbnet *dev, u16 index, u16 size, void
 
         urb = usb_alloc_urb(0, GFP_ATOMIC);
         if (!urb) {
-                dev_dbg(&dev->udev->dev, "Error allocating URB "
-                                "in write_cmd_async!");
+                dev_dbg(&dev->udev->dev,
+                        "Error allocating URB in write_cmd_async!\n");
                 return;
         }
 
         req = kmalloc(sizeof *req, GFP_ATOMIC);
         if (!req) {
-                dev_err(&dev->udev->dev, "Failed to allocate memory for "
-                                "control request");
+                dev_err(&dev->udev->dev,
+                        "Failed to allocate memory for control request\n");
                 goto out;
         }
         req->bRequestType = MCS7830_WR_BMREQ;
@@ -153,8 +153,8 @@ static void mcs7830_set_reg_async(struct usbnet *dev, u16 index, u16 size, void
 
         ret = usb_submit_urb(urb, GFP_ATOMIC);
         if (ret < 0) {
-                dev_err(&dev->udev->dev, "Error submitting the control "
-                                "message: ret=%d", ret);
+                dev_err(&dev->udev->dev,
+                        "Error submitting the control message: ret=%d\n", ret);
                 goto out;
         }
         return;
diff --git a/drivers/net/xen-netfront.c b/drivers/net/xen-netfront.c
index 7fd505cc4f7a..2a8fc431099f 100644
--- a/drivers/net/xen-netfront.c
+++ b/drivers/net/xen-netfront.c
@@ -1526,7 +1526,7 @@ static int xennet_connect(struct net_device *dev)
 
         if (!feature_rx_copy) {
                 dev_info(&dev->dev,
-                         "backend does not support copying recieve path");
+                         "backend does not support copying receive path\n");
                 return -ENODEV;
         }