fix typos concerning "initiali[zs]e"

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

8 files changed, 18 insertions, 18 deletions

diff --git a/drivers/net/3c527.c b/drivers/net/3c527.c
index 38395dfa4963..70705d1306b9 100644
--- a/drivers/net/3c527.c
+++ b/drivers/net/3c527.c
@@ -729,14 +729,14 @@ static void mc32_halt_transceiver(struct net_device *dev)
  *      mc32_load_rx_ring       -       load the ring of receive buffers
  *      @dev: 3c527 to build the ring for
  *
- *      This initalises the on-card and driver datastructures to
+ *      This initialises the on-card and driver datastructures to
  *      the point where mc32_start_transceiver() can be called.
  *
  *      The card sets up the receive ring for us. We are required to use the
  *      ring it provides, although the size of the ring is configurable.
  *
  *      We allocate an sk_buff for each ring entry in turn and
- *      initalise its house-keeping info. At the same time, we read
+ *      initialise its house-keeping info. At the same time, we read
  *      each 'next' pointer in our rx_ring array. This reduces slow
  *      shared-memory reads and makes it easy to access predecessor
  *      descriptors.
diff --git a/drivers/net/appletalk/ipddp.c b/drivers/net/appletalk/ipddp.c
index 79636ee35829..0362c8d31a08 100644
--- a/drivers/net/appletalk/ipddp.c
+++ b/drivers/net/appletalk/ipddp.c
@@ -80,7 +80,7 @@ static struct net_device * __init ipddp_init(void)
         if (version_printed++ == 0)
                 printk(version);
 
-        /* Initalize the device structure. */
+        /* Initialize the device structure. */
         dev->netdev_ops = &ipddp_netdev_ops;
 
         dev->type = ARPHRD_IPDDP;               /* IP over DDP tunnel */
diff --git a/drivers/net/hp100.c b/drivers/net/hp100.c
index 68e5ac8832ad..dfc787fa8b17 100644
--- a/drivers/net/hp100.c
+++ b/drivers/net/hp100.c
@@ -1071,7 +1071,7 @@ static void hp100_mmuinit(struct net_device *dev)
         if (lp->mode == 1)
                 hp100_init_pdls(dev);
 
-        /* Go to performance page and initalize isr and imr registers */
+        /* Go to performance page and initialize isr and imr registers */
         hp100_page(PERFORMANCE);
         hp100_outw(0xfefe, IRQ_MASK);   /* mask off all ints */
         hp100_outw(0xffff, IRQ_STATUS); /* ack IRQ */
diff --git a/drivers/net/ibm_newemac/core.c b/drivers/net/ibm_newemac/core.c
index 2484e9e6c1ed..6a45f8f3a0c7 100644
--- a/drivers/net/ibm_newemac/core.c
+++ b/drivers/net/ibm_newemac/core.c
@@ -1044,7 +1044,7 @@ static int emac_change_mtu(struct net_device *ndev, int new_mtu)
         DBG(dev, "change_mtu(%d)" NL, new_mtu);
 
         if (netif_running(ndev)) {
-                /* Check if we really need to reinitalize RX ring */
+                /* Check if we really need to reinitialize RX ring */
                 if (emac_rx_skb_size(ndev->mtu) != emac_rx_skb_size(new_mtu))
                         ret = emac_resize_rx_ring(dev, new_mtu);
         }
diff --git a/drivers/net/ksz884x.c b/drivers/net/ksz884x.c
index c80ca64277b2..c02ce1ab6571 100644
--- a/drivers/net/ksz884x.c
+++ b/drivers/net/ksz884x.c
@@ -6812,7 +6812,7 @@ static int stp;
 static int fast_aging;
 
 /**
- * netdev_init - initalize network device.
+ * netdev_init - initialize network device.
  * @dev:        Network device.
  *
  * This function initializes the network device.
diff --git a/drivers/net/ll_temac_main.c b/drivers/net/ll_temac_main.c
index b59b24d667f0..0ace2a46d31c 100644
--- a/drivers/net/ll_temac_main.c
+++ b/drivers/net/ll_temac_main.c
@@ -449,7 +449,7 @@ static u32 temac_setoptions(struct net_device *ndev, u32 options)
         return (0);
 }
 
-/* Initilize temac */
+/* Initialize temac */
 static void temac_device_reset(struct net_device *ndev)
 {
         struct temac_local *lp = netdev_priv(ndev);
diff --git a/drivers/net/tulip/dmfe.c b/drivers/net/tulip/dmfe.c
index 29e6c63d39fd..0bc4f3030a80 100644
--- a/drivers/net/tulip/dmfe.c
+++ b/drivers/net/tulip/dmfe.c
@@ -589,7 +589,7 @@ static int dmfe_open(struct DEVICE *dev)
                 db->dm910x_chk_mode = 1;        /* Enter the check mode */
         }
 
-        /* Initilize DM910X board */
+        /* Initialize DM910X board */
         dmfe_init_dm910x(dev);
 
         /* Active System Interface */
@@ -606,9 +606,9 @@ static int dmfe_open(struct DEVICE *dev)
 }
 
 
-/*      Initilize DM910X board
+/*      Initialize DM910X board
  *      Reset DM910X board
- *      Initilize TX/Rx descriptor chain structure
+ *      Initialize TX/Rx descriptor chain structure
  *      Send the set-up frame
  *      Enable Tx/Rx machine
  */
@@ -649,7 +649,7 @@ static void dmfe_init_dm910x(struct DEVICE *dev)
         if ( !(db->media_mode & DMFE_AUTO) )
                 db->op_mode = db->media_mode;   /* Force Mode */
 
-        /* Initiliaze Transmit/Receive decriptor and CR3/4 */
+        /* Initialize Transmit/Receive decriptor and CR3/4 */
         dmfe_descriptor_init(db, ioaddr);
 
         /* Init CR6 to program DM910x operation */
@@ -1288,7 +1288,7 @@ static void dmfe_timer(unsigned long data)
  *      Stop DM910X board
  *      Free Tx/Rx allocated memory
  *      Reset DM910X board
- *      Re-initilize DM910X board
+ *      Re-initialize DM910X board
  */
 
 static void dmfe_dynamic_reset(struct DEVICE *dev)
@@ -1316,7 +1316,7 @@ static void dmfe_dynamic_reset(struct DEVICE *dev)
         netif_carrier_off(dev);
         db->wait_reset = 0;
 
-        /* Re-initilize DM910X board */
+        /* Re-initialize DM910X board */
         dmfe_init_dm910x(dev);
 
         /* Restart upper layer interface */
@@ -1447,7 +1447,7 @@ static void update_cr6(u32 cr6_data, unsigned long ioaddr)
 
 /*
  *      Send a setup frame for DM9132
- *      This setup frame initilize DM910X address filter mode
+ *      This setup frame initialize DM910X address filter mode
 */
 
 static void dm9132_id_table(struct DEVICE *dev)
@@ -1489,7 +1489,7 @@ static void dm9132_id_table(struct DEVICE *dev)
 
 /*
  *      Send a setup frame for DM9102/DM9102A
- *      This setup frame initilize DM910X address filter mode
+ *      This setup frame initialize DM910X address filter mode
  */
 
 static void send_filter_frame(struct DEVICE *dev)
@@ -2142,7 +2142,7 @@ static int dmfe_resume(struct pci_dev *pci_dev)
         pci_set_power_state(pci_dev, PCI_D0);
         pci_restore_state(pci_dev);
 
-        /* Re-initilize DM910X board */
+        /* Re-initialize DM910X board */
         dmfe_init_dm910x(dev);
 
         /* Disable WOL */
@@ -2196,7 +2196,7 @@ MODULE_PARM_DESC(SF_mode, "Davicom DM9xxx special function "
 
 /*      Description:
  *      when user used insmod to add module, system invoked init_module()
- *      to initilize and register.
+ *      to initialize and register.
  */
 
 static int __init dmfe_init_module(void)
diff --git a/drivers/net/wimax/i2400m/control.c b/drivers/net/wimax/i2400m/control.c
index d86e8f31e7fc..7f48e040c3be 100644
--- a/drivers/net/wimax/i2400m/control.c
+++ b/drivers/net/wimax/i2400m/control.c
@@ -50,7 +50,7 @@
  *
  * ROADMAP
  *
- * i2400m_dev_initalize()       Called by i2400m_dev_start()
+ * i2400m_dev_initialize()       Called by i2400m_dev_start()
  *   i2400m_set_init_config()
  *   i2400m_cmd_get_state()
  * i2400m_dev_shutdown()        Called by i2400m_dev_stop()