sky2: revert to access PCI config via device space

Using the hardware window into PCI config space is more reliable
and smaller/faster than using the pci_config routines. It avoids issues
with MMCONFIG etc.

Reverts: 167f53d05fccb47b6eeadac7f6705b3f2f042d03

Please apply for 2.6.24

Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

2 files changed, 56 insertions, 38 deletions

diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c
index 8c4c7430d906..65071e40959b 100644
--- a/drivers/net/sky2.c
+++ b/drivers/net/sky2.c
@@ -240,22 +240,21 @@ static void sky2_power_on(struct sky2_hw *hw)
                 sky2_write8(hw, B2_Y2_CLK_GATE, 0);
 
         if (hw->flags & SKY2_HW_ADV_POWER_CTL) {
-                struct pci_dev *pdev = hw->pdev;
                 u32 reg;
 
-                pci_write_config_dword(pdev, PCI_DEV_REG3, 0);
+                sky2_pci_write32(hw, PCI_DEV_REG3, 0);
 
-                pci_read_config_dword(pdev, PCI_DEV_REG4, &reg);
+                reg = sky2_pci_read32(hw, PCI_DEV_REG4);
                 /* set all bits to 0 except bits 15..12 and 8 */
                 reg &= P_ASPM_CONTROL_MSK;
-                pci_write_config_dword(pdev, PCI_DEV_REG4, reg);
+                sky2_pci_write32(hw, PCI_DEV_REG4, reg);
 
-                pci_read_config_dword(pdev, PCI_DEV_REG5, &reg);
+                reg = sky2_pci_read32(hw, PCI_DEV_REG5);
                 /* set all bits to 0 except bits 28 & 27 */
                 reg &= P_CTL_TIM_VMAIN_AV_MSK;
-                pci_write_config_dword(pdev, PCI_DEV_REG5, reg);
+                sky2_pci_write32(hw, PCI_DEV_REG5, reg);
 
-                pci_write_config_dword(pdev, PCI_CFG_REG_1, 0);
+                sky2_pci_write32(hw, PCI_CFG_REG_1, 0);
 
                 /* Enable workaround for dev 4.107 on Yukon-Ultra & Extreme */
                 reg = sky2_read32(hw, B2_GP_IO);
@@ -619,12 +618,11 @@ static void sky2_phy_init(struct sky2_hw *hw, unsigned port)
 
 static void sky2_phy_power(struct sky2_hw *hw, unsigned port, int onoff)
 {
-        struct pci_dev *pdev = hw->pdev;
         u32 reg1;
         static const u32 phy_power[] = { PCI_Y2_PHY1_POWD, PCI_Y2_PHY2_POWD };
         static const u32 coma_mode[] = { PCI_Y2_PHY1_COMA, PCI_Y2_PHY2_COMA };
 
-        pci_read_config_dword(pdev, PCI_DEV_REG1, &reg1);
+        reg1 = sky2_pci_read32(hw, PCI_DEV_REG1);
         /* Turn on/off phy power saving */
         if (onoff)
                 reg1 &= ~phy_power[port];
@@ -634,8 +632,8 @@ static void sky2_phy_power(struct sky2_hw *hw, unsigned port, int onoff)
         if (onoff && hw->chip_id == CHIP_ID_YUKON_XL && hw->chip_rev > 1)
                 reg1 |= coma_mode[port];
 
-        pci_write_config_dword(pdev, PCI_DEV_REG1, reg1);
-        pci_read_config_dword(pdev, PCI_DEV_REG1, &reg1);
+        sky2_pci_write32(hw, PCI_DEV_REG1, reg1);
+        reg1 = sky2_pci_read32(hw, PCI_DEV_REG1);
 
         udelay(100);
 }
@@ -704,9 +702,9 @@ static void sky2_wol_init(struct sky2_port *sky2)
         sky2_write16(hw, WOL_REGS(port, WOL_CTRL_STAT), ctrl);
 
         /* Turn on legacy PCI-Express PME mode */
-        pci_read_config_dword(hw->pdev, PCI_DEV_REG1, &reg1);
+        reg1 = sky2_pci_read32(hw, PCI_DEV_REG1);
         reg1 |= PCI_Y2_PME_LEGACY;
-        pci_write_config_dword(hw->pdev, PCI_DEV_REG1, reg1);
+        sky2_pci_write32(hw, PCI_DEV_REG1, reg1);
 
         /* block receiver */
         sky2_write8(hw, SK_REG(port, RX_GMF_CTRL_T), GMF_RST_SET);
@@ -1322,9 +1320,10 @@ static int sky2_up(struct net_device *dev)
             (cap = pci_find_capability(hw->pdev, PCI_CAP_ID_PCIX))) {
                 u16 cmd;
 
-                pci_read_config_word(hw->pdev, cap + PCI_X_CMD, &cmd);
+                cmd = sky2_pci_read16(hw, cap + PCI_X_CMD);
                 cmd &= ~PCI_X_CMD_MAX_SPLIT;
-                pci_write_config_word(hw->pdev, cap + PCI_X_CMD, cmd);
+                sky2_pci_write16(hw, cap + PCI_X_CMD, cmd);
+
         }
 
         if (netif_msg_ifup(sky2))
@@ -2422,12 +2421,12 @@ static void sky2_hw_intr(struct sky2_hw *hw)
         if (status & (Y2_IS_MST_ERR | Y2_IS_IRQ_STAT)) {
                 u16 pci_err;
 
-                pci_read_config_word(pdev, PCI_STATUS, &pci_err);
+                pci_err = sky2_pci_read16(hw, PCI_STATUS);
                 if (net_ratelimit())
                         dev_err(&pdev->dev, "PCI hardware error (0x%x)\n",
                                 pci_err);
 
-                pci_write_config_word(pdev, PCI_STATUS,
+                sky2_pci_write16(hw, PCI_STATUS,
                                       pci_err | PCI_STATUS_ERROR_BITS);
         }
 
@@ -2699,13 +2698,10 @@ static inline u32 sky2_clk2us(const struct sky2_hw *hw, u32 clk)
 
 static int __devinit sky2_init(struct sky2_hw *hw)
 {
-        int rc;
         u8 t8;
 
         /* Enable all clocks and check for bad PCI access */
-        rc = pci_write_config_dword(hw->pdev, PCI_DEV_REG3, 0);
-        if (rc)
-                return rc;
+        sky2_pci_write32(hw, PCI_DEV_REG3, 0);
 
         sky2_write8(hw, B0_CTST, CS_RST_CLR);
 
@@ -2802,9 +2798,9 @@ static void sky2_reset(struct sky2_hw *hw)
         sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON);
 
         /* clear PCI errors, if any */
-        pci_read_config_word(pdev, PCI_STATUS, &status);
+        status = sky2_pci_read16(hw, PCI_STATUS);
         status |= PCI_STATUS_ERROR_BITS;
-        pci_write_config_word(pdev, PCI_STATUS, status);
+        sky2_pci_write16(hw, PCI_STATUS, status);
 
         sky2_write8(hw, B0_CTST, CS_MRST_CLR);
 
@@ -3668,32 +3664,33 @@ static int sky2_set_tso(struct net_device *dev, u32 data)
 static int sky2_get_eeprom_len(struct net_device *dev)
 {
         struct sky2_port *sky2 = netdev_priv(dev);
+        struct sky2_hw *hw = sky2->hw;
         u16 reg2;
 
-        pci_read_config_word(sky2->hw->pdev, PCI_DEV_REG2, &reg2);
+        reg2 = sky2_pci_read16(hw, PCI_DEV_REG2);
         return 1 << ( ((reg2 & PCI_VPD_ROM_SZ) >> 14) + 8);
 }
 
-static u32 sky2_vpd_read(struct pci_dev *pdev, int cap, u16 offset)
+static u32 sky2_vpd_read(struct sky2_hw *hw, int cap, u16 offset)
 {
         u32 val;
 
-        pci_write_config_word(pdev, cap + PCI_VPD_ADDR, offset);
+        sky2_pci_write16(hw, cap + PCI_VPD_ADDR, offset);
 
         do {
-                pci_read_config_word(pdev, cap + PCI_VPD_ADDR, &offset);
+                offset = sky2_pci_read16(hw, cap + PCI_VPD_ADDR);
         } while (!(offset & PCI_VPD_ADDR_F));
 
-        pci_read_config_dword(pdev, cap + PCI_VPD_DATA, &val);
+        val = sky2_pci_read32(hw, cap + PCI_VPD_DATA);
         return val;
 }
 
-static void sky2_vpd_write(struct pci_dev *pdev, int cap, u16 offset, u32 val)
+static void sky2_vpd_write(struct sky2_hw *hw, int cap, u16 offset, u32 val)
 {
-        pci_write_config_word(pdev, cap + PCI_VPD_DATA, val);
-        pci_write_config_dword(pdev, cap + PCI_VPD_ADDR, offset | PCI_VPD_ADDR_F);
+        sky2_pci_write16(hw, cap + PCI_VPD_DATA, val);
+        sky2_pci_write32(hw, cap + PCI_VPD_ADDR, offset | PCI_VPD_ADDR_F);
         do {
-                pci_read_config_word(pdev, cap + PCI_VPD_ADDR, &offset);
+                offset = sky2_pci_read16(hw, cap + PCI_VPD_ADDR);
         } while (offset & PCI_VPD_ADDR_F);
 }
 
@@ -3711,7 +3708,7 @@ static int sky2_get_eeprom(struct net_device *dev, struct ethtool_eeprom *eeprom
         eeprom->magic = SKY2_EEPROM_MAGIC;
 
         while (length > 0) {
-                u32 val = sky2_vpd_read(sky2->hw->pdev, cap, offset);
+                u32 val = sky2_vpd_read(sky2->hw, cap, offset);
                 int n = min_t(int, length, sizeof(val));
 
                 memcpy(data, &val, n);
@@ -3741,10 +3738,10 @@ static int sky2_set_eeprom(struct net_device *dev, struct ethtool_eeprom *eeprom
                 int n = min_t(int, length, sizeof(val));
 
                 if (n < sizeof(val))
-                        val = sky2_vpd_read(sky2->hw->pdev, cap, offset);
+                        val = sky2_vpd_read(sky2->hw, cap, offset);
                 memcpy(&val, data, n);
 
-                sky2_vpd_write(sky2->hw->pdev, cap, offset, val);
+                sky2_vpd_write(sky2->hw, cap, offset, val);
 
                 length -= n;
                 data += n;
@@ -4180,9 +4177,9 @@ static int __devinit sky2_probe(struct pci_dev *pdev,
          */
         {
                 u32 reg;
-                pci_read_config_dword(pdev,PCI_DEV_REG2, &reg);
+                reg = sky2_pci_read32(hw, PCI_DEV_REG2);
                 reg &= ~PCI_REV_DESC;
-                pci_write_config_dword(pdev, PCI_DEV_REG2, reg);
+                sky2_pci_write32(hw, PCI_DEV_REG2, reg);
         }
 #endif
 
@@ -4373,7 +4370,7 @@ static int sky2_resume(struct pci_dev *pdev)
         if (hw->chip_id == CHIP_ID_YUKON_EX ||
             hw->chip_id == CHIP_ID_YUKON_EC_U ||
             hw->chip_id == CHIP_ID_YUKON_FE_P)
-                pci_write_config_dword(pdev, PCI_DEV_REG3, 0);
+                sky2_pci_write32(hw, PCI_DEV_REG3, 0);
 
         sky2_reset(hw);
         sky2_write32(hw, B0_IMSK, Y2_IS_BASE);
diff --git a/drivers/net/sky2.h b/drivers/net/sky2.h
index 69525fd7908d..bc646a47edd2 100644
--- a/drivers/net/sky2.h
+++ b/drivers/net/sky2.h
@@ -2128,4 +2128,25 @@ static inline void gma_set_addr(struct sky2_hw *hw, unsigned port, unsigned reg,
         gma_write16(hw, port, reg+4,(u16) addr[2] | ((u16) addr[3] << 8));
         gma_write16(hw, port, reg+8,(u16) addr[4] | ((u16) addr[5] << 8));
 }
+
+/* PCI config space access */
+static inline u32 sky2_pci_read32(const struct sky2_hw *hw, unsigned reg)
+{
+        return sky2_read32(hw, Y2_CFG_SPC + reg);
+}
+
+static inline u16 sky2_pci_read16(const struct sky2_hw *hw, unsigned reg)
+{
+        return sky2_read16(hw, Y2_CFG_SPC + reg);
+}
+
+static inline void sky2_pci_write32(struct sky2_hw *hw, unsigned reg, u32 val)
+{
+        sky2_write32(hw, Y2_CFG_SPC + reg, val);
+}
+
+static inline void sky2_pci_write16(struct sky2_hw *hw, unsigned reg, u16 val)
+{
+        sky2_write16(hw, Y2_CFG_SPC + reg, val);
+}
 #endif