r8169: get ethtool settings through the generic mii helper

It avoids to report unsupported link capabilities with
the fast-ethernet only 8101/8102.

Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
Tested-by: Martin Capitanio <martin@capitanio.org>
Fixed-by: Ivan Vecera <ivecera@redhat.com>
Cc: Edward Hsu <edward_hsu@realtek.com.tw>

1 files changed, 46 insertions, 53 deletions

diff --git a/drivers/net/r8169.c b/drivers/net/r8169.c
index a3e3895e5032..dac2677eeede 100644
--- a/drivers/net/r8169.c
+++ b/drivers/net/r8169.c
@@ -370,8 +370,9 @@ struct ring_info {
 };
 
 enum features {
-        RTL_FEATURE_WOL = (1 << 0),
-        RTL_FEATURE_MSI = (1 << 1),
+        RTL_FEATURE_WOL         = (1 << 0),
+        RTL_FEATURE_MSI         = (1 << 1),
+        RTL_FEATURE_GMII        = (1 << 2),
 };
 
 struct rtl8169_private {
@@ -406,13 +407,15 @@ struct rtl8169_private {
         struct vlan_group *vlgrp;
 #endif
         int (*set_speed)(struct net_device *, u8 autoneg, u16 speed, u8 duplex);
-        void (*get_settings)(struct net_device *, struct ethtool_cmd *);
+        int (*get_settings)(struct net_device *, struct ethtool_cmd *);
         void (*phy_reset_enable)(void __iomem *);
         void (*hw_start)(struct net_device *);
         unsigned int (*phy_reset_pending)(void __iomem *);
         unsigned int (*link_ok)(void __iomem *);
         struct delayed_work task;
         unsigned features;
+
+        struct mii_if_info mii;
 };
 
 MODULE_AUTHOR("Realtek and the Linux r8169 crew <netdev@vger.kernel.org>");
@@ -482,6 +485,23 @@ static int mdio_read(void __iomem *ioaddr, int reg_addr)
         return value;
 }
 
+static void rtl_mdio_write(struct net_device *dev, int phy_id, int location,
+                           int val)
+{
+        struct rtl8169_private *tp = netdev_priv(dev);
+        void __iomem *ioaddr = tp->mmio_addr;
+
+        mdio_write(ioaddr, location, val);
+}
+
+static int rtl_mdio_read(struct net_device *dev, int phy_id, int location)
+{
+        struct rtl8169_private *tp = netdev_priv(dev);
+        void __iomem *ioaddr = tp->mmio_addr;
+
+        return mdio_read(ioaddr, location);
+}
+
 static void rtl8169_irq_mask_and_ack(void __iomem *ioaddr)
 {
         RTL_W16(IntrMask, 0x0000);
@@ -850,7 +870,7 @@ static int rtl8169_rx_vlan_skb(struct rtl8169_private *tp, struct RxDesc *desc,
 
 #endif
 
-static void rtl8169_gset_tbi(struct net_device *dev, struct ethtool_cmd *cmd)
+static int rtl8169_gset_tbi(struct net_device *dev, struct ethtool_cmd *cmd)
 {
         struct rtl8169_private *tp = netdev_priv(dev);
         void __iomem *ioaddr = tp->mmio_addr;
@@ -867,65 +887,29 @@ static void rtl8169_gset_tbi(struct net_device *dev, struct ethtool_cmd *cmd)
 
         cmd->speed = SPEED_1000;
         cmd->duplex = DUPLEX_FULL; /* Always set */
+
+        return 0;
 }
 
-static void rtl8169_gset_xmii(struct net_device *dev, struct ethtool_cmd *cmd)
+static int rtl8169_gset_xmii(struct net_device *dev, struct ethtool_cmd *cmd)
 {
         struct rtl8169_private *tp = netdev_priv(dev);
-        void __iomem *ioaddr = tp->mmio_addr;
-        u8 status;
-
-        cmd->supported = SUPPORTED_10baseT_Half |
-                         SUPPORTED_10baseT_Full |
-                         SUPPORTED_100baseT_Half |
-                         SUPPORTED_100baseT_Full |
-                         SUPPORTED_1000baseT_Full |
-                         SUPPORTED_Autoneg |
-                         SUPPORTED_TP;
-
-        cmd->autoneg = 1;
-        cmd->advertising = ADVERTISED_TP | ADVERTISED_Autoneg;
-
-        if (tp->phy_auto_nego_reg & ADVERTISE_10HALF)
-                cmd->advertising |= ADVERTISED_10baseT_Half;
-        if (tp->phy_auto_nego_reg & ADVERTISE_10FULL)
-                cmd->advertising |= ADVERTISED_10baseT_Full;
-        if (tp->phy_auto_nego_reg & ADVERTISE_100HALF)
-                cmd->advertising |= ADVERTISED_100baseT_Half;
-        if (tp->phy_auto_nego_reg & ADVERTISE_100FULL)
-                cmd->advertising |= ADVERTISED_100baseT_Full;
-        if (tp->phy_1000_ctrl_reg & ADVERTISE_1000FULL)
-                cmd->advertising |= ADVERTISED_1000baseT_Full;
-
-        status = RTL_R8(PHYstatus);
-
-        if (status & _1000bpsF)
-                cmd->speed = SPEED_1000;
-        else if (status & _100bps)
-                cmd->speed = SPEED_100;
-        else if (status & _10bps)
-                cmd->speed = SPEED_10;
-
-        if (status & TxFlowCtrl)
-                cmd->advertising |= ADVERTISED_Asym_Pause;
-        if (status & RxFlowCtrl)
-                cmd->advertising |= ADVERTISED_Pause;
-
-        cmd->duplex = ((status & _1000bpsF) || (status & FullDup)) ?
-                      DUPLEX_FULL : DUPLEX_HALF;
+
+        return mii_ethtool_gset(&tp->mii, cmd);
 }
 
 static int rtl8169_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
 {
         struct rtl8169_private *tp = netdev_priv(dev);
         unsigned long flags;
+        int rc;
 
         spin_lock_irqsave(&tp->lock, flags);
 
-        tp->get_settings(dev, cmd);
+        rc = tp->get_settings(dev, cmd);
 
         spin_unlock_irqrestore(&tp->lock, flags);
-        return 0;
+        return rc;
 }
 
 static void rtl8169_get_regs(struct net_device *dev, struct ethtool_regs *regs,
@@ -1513,7 +1497,7 @@ static const struct rtl_cfg_info {
         unsigned int align;
         u16 intr_event;
         u16 napi_event;
-        unsigned msi;
+        unsigned features;
 } rtl_cfg_infos [] = {
         [RTL_CFG_0] = {
                 .hw_start       = rtl_hw_start_8169,
@@ -1522,7 +1506,7 @@ static const struct rtl_cfg_info {
                 .intr_event     = SYSErr | LinkChg | RxOverflow |
                                   RxFIFOOver | TxErr | TxOK | RxOK | RxErr,
                 .napi_event     = RxFIFOOver | TxErr | TxOK | RxOK | RxOverflow,
-                .msi            = 0
+                .features       = RTL_FEATURE_GMII
         },
         [RTL_CFG_1] = {
                 .hw_start       = rtl_hw_start_8168,
@@ -1531,7 +1515,7 @@ static const struct rtl_cfg_info {
                 .intr_event     = SYSErr | LinkChg | RxOverflow |
                                   TxErr | TxOK | RxOK | RxErr,
                 .napi_event     = TxErr | TxOK | RxOK | RxOverflow,
-                .msi            = RTL_FEATURE_MSI
+                .features       = RTL_FEATURE_GMII | RTL_FEATURE_MSI
         },
         [RTL_CFG_2] = {
                 .hw_start       = rtl_hw_start_8101,
@@ -1540,7 +1524,7 @@ static const struct rtl_cfg_info {
                 .intr_event     = SYSErr | LinkChg | RxOverflow | PCSTimeout |
                                   RxFIFOOver | TxErr | TxOK | RxOK | RxErr,
                 .napi_event     = RxFIFOOver | TxErr | TxOK | RxOK | RxOverflow,
-                .msi            = RTL_FEATURE_MSI
+                .features       = RTL_FEATURE_MSI
         }
 };
 
@@ -1552,7 +1536,7 @@ static unsigned rtl_try_msi(struct pci_dev *pdev, void __iomem *ioaddr,
         u8 cfg2;
 
         cfg2 = RTL_R8(Config2) & ~MSIEnable;
-        if (cfg->msi) {
+        if (cfg->features & RTL_FEATURE_MSI) {
                 if (pci_enable_msi(pdev)) {
                         dev_info(&pdev->dev, "no MSI. Back to INTx.\n");
                 } else {
@@ -1578,6 +1562,7 @@ rtl8169_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
         const struct rtl_cfg_info *cfg = rtl_cfg_infos + ent->driver_data;
         const unsigned int region = cfg->region;
         struct rtl8169_private *tp;
+        struct mii_if_info *mii;
         struct net_device *dev;
         void __iomem *ioaddr;
         unsigned int i;
@@ -1602,6 +1587,14 @@ rtl8169_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
         tp->pci_dev = pdev;
         tp->msg_enable = netif_msg_init(debug.msg_enable, R8169_MSG_DEFAULT);
 
+        mii = &tp->mii;
+        mii->dev = dev;
+        mii->mdio_read = rtl_mdio_read;
+        mii->mdio_write = rtl_mdio_write;
+        mii->phy_id_mask = 0x1f;
+        mii->reg_num_mask = 0x1f;
+        mii->supports_gmii = !!(cfg->features & RTL_FEATURE_GMII);
+
         /* enable device (incl. PCI PM wakeup and hotplug setup) */
         rc = pci_enable_device(pdev);
         if (rc < 0) {