sundance: Really read addr 0

Make phy 0 actually be read, as it is not being right now as we have:

              int mii_status = mdio_read(dev, phy, MII_BMSR);
              int phyx = phy & 0x1f;

When we should have instead:

              int phyx = phy & 0x1f;
              int mii_status = mdio_read(dev, phyx, MII_BMSR);

so that when phy, in the end of the (phy = 1; phy <= 32...) loop gets
to 32 phyx gets to 0, i.e. we were reading at 32, when the intended
read was for 0.

Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>

1 files changed, 5 insertions, 1 deletions

diff --git a/drivers/net/sundance.c b/drivers/net/sundance.c
index 0ab9c38b4a34..8cdeb5cbab5b 100644
--- a/drivers/net/sundance.c
+++ b/drivers/net/sundance.c
@@ -633,9 +633,13 @@ static int __devinit sundance_probe1 (struct pci_dev *pdev,
 
         np->phys[0] = 1;                /* Default setting */
         np->mii_preamble_required++;
+        /*
+         * It seems some phys doesn't deal well with address 0 being accessed
+         * first, so leave address zero to the end of the loop (32 & 31).
+         */
         for (phy = 1; phy <= 32 && phy_idx < MII_CNT; phy++) {
-                int mii_status = mdio_read(dev, phy, MII_BMSR);
                 int phyx = phy & 0x1f;
+                int mii_status = mdio_read(dev, phyx, MII_BMSR);
                 if (mii_status != 0xffff  &&  mii_status != 0x0000) {
                         np->phys[phy_idx++] = phyx;
                         np->mii_if.advertising = mdio_read(dev, phyx, MII_ADVERTISE);