[PATCH] NI5010 netcard cleanup

- updated MAINTAINERS entry to new format
- updated Jan-Pascal's (ACKed) and my email address
- driver cleanup/modernization (runtime-, not hardware-tested)

[bunk@stusta.de: build fix]
Signed-off-by: Andreas Mohr <andi@lisas.de>
Cc: Jeff Garzik <jeff@garzik.org>
Cc: Jan-Pascal van Best <jvbest@qv3pluto.leidenuniv.nl>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

1 files changed, 24 insertions, 28 deletions

diff --git a/drivers/net/ni5010.c b/drivers/net/ni5010.c
index a68bf474f6ed..d4be207d321a 100644
--- a/drivers/net/ni5010.c
+++ b/drivers/net/ni5010.c
@@ -1,17 +1,12 @@
 /*      ni5010.c: A network driver for the MiCom-Interlan NI5010 ethercard.
  *
- *      Copyright 1996,1997 Jan-Pascal van Best and Andreas Mohr.
+ *      Copyright 1996,1997,2006 Jan-Pascal van Best and Andreas Mohr.
  *
  *      This software may be used and distributed according to the terms
  *      of the GNU General Public License, incorporated herein by reference.
  *
  *      The authors may be reached as:
- *              jvbest@wi.leidenuniv.nl         a.mohr@mailto.de
- *      or by snail mail as
- *              Jan-Pascal van Best             Andreas Mohr
- *              Klikspaanweg 58-4               Stauferstr. 6
- *              2324 LZ  Leiden                 D-71272 Renningen
- *              The Netherlands                 Germany
+ *              janpascal@vanbest.org           andi@lisas.de
  *
  *      Sources:
  *              Donald Becker's "skeleton.c"
@@ -27,8 +22,9 @@
  *      970503  v0.93: Fixed auto-irq failure on warm reboot (JB)
  *      970623  v1.00: First kernel version (AM)
  *      970814  v1.01: Added detection of onboard receive buffer size (AM)
+ *      060611  v1.02: slight cleanup: email addresses, driver modernization.
  *      Bugs:
- *              - None known...
+ *              - not SMP-safe (no locking of I/O accesses)
  *              - Note that you have to patch ifconfig for the new /proc/net/dev
  *              format. It gives incorrect stats otherwise.
  *
@@ -39,7 +35,7 @@
  *              Complete merge with Andreas' driver
  *              Implement ring buffers (Is this useful? You can't squeeze
  *                      too many packet in a 2k buffer!)
- *              Implement DMA (Again, is this useful? Some docs says DMA is
+ *              Implement DMA (Again, is this useful? Some docs say DMA is
  *                      slower than programmed I/O)
  *
  *      Compile with:
@@ -47,7 +43,7 @@
  *                      -DMODULE -c ni5010.c 
  *
  *      Insert with e.g.:
- *              insmod ni5010.o io=0x300 irq=5  
+ *              insmod ni5010.ko io=0x300 irq=5
  */
 
 #include <linux/module.h>
@@ -69,15 +65,15 @@
 
 #include "ni5010.h"
 
-static const char *boardname = "NI5010";
-static char *version =
-        "ni5010.c: v1.00 06/23/97 Jan-Pascal van Best and Andreas Mohr\n";
+static const char boardname[] = "NI5010";
+static char version[] __initdata =
+        "ni5010.c: v1.02 20060611 Jan-Pascal van Best and Andreas Mohr\n";
         
 /* bufsize_rcv == 0 means autoprobing */
 static unsigned int bufsize_rcv;
 
-#define jumpered_interrupts     /* IRQ line jumpered on board */
-#undef jumpered_dma             /* No DMA used */
+#define JUMPERED_INTERRUPTS     /* IRQ line jumpered on board */
+#undef JUMPERED_DMA             /* No DMA used */
 #undef FULL_IODETECT            /* Only detect in portlist */
 
 #ifndef FULL_IODETECT
@@ -281,7 +277,7 @@ static int __init ni5010_probe1(struct net_device *dev, int ioaddr)
 
         PRINTK2((KERN_DEBUG "%s: I/O #4 passed!\n", dev->name));
 
-#ifdef jumpered_interrupts
+#ifdef JUMPERED_INTERRUPTS
         if (dev->irq == 0xff)
                 ;
         else if (dev->irq < 2) {
@@ -305,7 +301,7 @@ static int __init ni5010_probe1(struct net_device *dev, int ioaddr)
         } else if (dev->irq == 2) {
                 dev->irq = 9;
         }
-#endif  /* jumpered_irq */
+#endif  /* JUMPERED_INTERRUPTS */
         PRINTK2((KERN_DEBUG "%s: I/O #9 passed!\n", dev->name));
 
         /* DMA is not supported (yet?), so no use detecting it */
@@ -334,7 +330,7 @@ static int __init ni5010_probe1(struct net_device *dev, int ioaddr)
                 outw(0, IE_GP);         /* Point GP at start of packet */
                 outb(0, IE_RBUF);       /* set buffer byte 0 to 0 again */
         }
-        printk("// bufsize rcv/xmt=%d/%d\n", bufsize_rcv, NI5010_BUFSIZE);
+        printk("-> bufsize rcv/xmt=%d/%d\n", bufsize_rcv, NI5010_BUFSIZE);
         memset(dev->priv, 0, sizeof(struct ni5010_local));
         
         dev->open               = ni5010_open;
@@ -354,11 +350,9 @@ static int __init ni5010_probe1(struct net_device *dev, int ioaddr)
         outb(0xff, EDLC_XCLR);  /* Kill all pending xmt interrupts */
 
         printk(KERN_INFO "%s: NI5010 found at 0x%x, using IRQ %d", dev->name, ioaddr, dev->irq);
-        if (dev->dma) printk(" & DMA %d", dev->dma);
+        if (dev->dma)
+                printk(" & DMA %d", dev->dma);
         printk(".\n");
-
-        printk(KERN_INFO "Join the NI5010 driver development team!\n");
-        printk(KERN_INFO "Mail to a.mohr@mailto.de or jvbest@wi.leidenuniv.nl\n");
         return 0;
 out:
         release_region(dev->base_addr, NI5010_IO_EXTENT);
@@ -371,7 +365,7 @@ out:
  *
  * This routine should set everything up anew at each open, even
  * registers that "should" only need to be set once at boot, so that
- * there is non-reboot way to recover if something goes wrong.
+ * there is a non-reboot way to recover if something goes wrong.
  */
    
 static int ni5010_open(struct net_device *dev)
@@ -390,13 +384,13 @@ static int ni5010_open(struct net_device *dev)
          * Always allocate the DMA channel after the IRQ,
          * and clean up on failure.
          */
-#ifdef jumpered_dma
+#ifdef JUMPERED_DMA
         if (request_dma(dev->dma, cardname)) {
                 printk(KERN_WARNING "%s: Cannot get dma %#2x\n", dev->name, dev->dma);
                 free_irq(dev->irq, NULL);
                 return -EAGAIN;
         }
-#endif  /* jumpered_dma */
+#endif  /* JUMPERED_DMA */
 
         PRINTK3((KERN_DEBUG "%s: passed open() #2\n", dev->name));
         /* Reset the hardware here.  Don't forget to set the station address. */
@@ -633,7 +627,7 @@ static int ni5010_close(struct net_device *dev)
         int ioaddr = dev->base_addr;
 
         PRINTK2((KERN_DEBUG "%s: entering ni5010_close\n", dev->name));
-#ifdef jumpered_interrupts      
+#ifdef JUMPERED_INTERRUPTS
         free_irq(dev->irq, NULL);
 #endif
         /* Put card in held-RESET state */
@@ -771,7 +765,7 @@ module_param(irq, int, 0);
 MODULE_PARM_DESC(io, "ni5010 I/O base address");
 MODULE_PARM_DESC(irq, "ni5010 IRQ number");
 
-int init_module(void)
+static int __init ni5010_init_module(void)
 {
         PRINTK2((KERN_DEBUG "%s: entering init_module\n", boardname));
         /*
@@ -792,13 +786,15 @@ int init_module(void)
         return 0;
 }
 
-void cleanup_module(void)
+static void __exit ni5010_cleanup_module(void)
 {
         PRINTK2((KERN_DEBUG "%s: entering cleanup_module\n", boardname));
         unregister_netdev(dev_ni5010);
         release_region(dev_ni5010->base_addr, NI5010_IO_EXTENT);
         free_netdev(dev_ni5010);
 }
+module_init(ni5010_init_module);
+module_exit(ni5010_cleanup_module);
 #endif /* MODULE */
 MODULE_LICENSE("GPL");