[netdrvr] Remove Linux-specific changelogs from several Becker template drivers

When in-kernel net drivers branched from Donald Becker's vanilla driver
set, in the days before BitKeeper and git, a driver changelog was
maintained in the driver source code.  These days, the kernel's
changelog is far superior and much more accurate, so the in-driver
changelogs are removed.

Another relic of the Becker/kernel split was version numbering, using
"foo-LKx.y.z" notation, resulting in weird version numbers like
"1.17b-LK1.1.9".  These drivers are for older hardware, and see few
changes these days, so the version numbers were all bumped to something
more simple.

Finally, in xircom_tulip_cb specifically, an additional cleanup removes
the always-enabled CARDBUS cpp macro.

Signed-off-by: Jeff Garzik <jeff@garzik.org>

8 files changed, 24 insertions, 522 deletions

diff --git a/drivers/net/dl2k.c b/drivers/net/dl2k.c
index 4b6ddb70f921..402961e68c89 100644
--- a/drivers/net/dl2k.c
+++ b/drivers/net/dl2k.c
@@ -9,49 +9,10 @@
     the Free Software Foundation; either version 2 of the License, or
     (at your option) any later version.
 */
-/*
-    Rev         Date            Description
-    ==========================================================================
-    0.01        2001/05/03      Created DL2000-based linux driver
-    0.02        2001/05/21      Added VLAN and hardware checksum support.
-    1.00        2001/06/26      Added jumbo frame support.
-    1.01        2001/08/21      Added two parameters, rx_coalesce and rx_timeout.
-    1.02        2001/10/08      Supported fiber media.
-                                Added flow control parameters.
-    1.03        2001/10/12      Changed the default media to 1000mbps_fd for 
-                                the fiber devices.
-    1.04        2001/11/08      Fixed Tx stopped when tx very busy.
-    1.05        2001/11/22      Fixed Tx stopped when unidirectional tx busy.
-    1.06        2001/12/13      Fixed disconnect bug at 10Mbps mode.
-                                Fixed tx_full flag incorrect.
-                                Added tx_coalesce paramter.
-    1.07        2002/01/03      Fixed miscount of RX frame error.
-    1.08        2002/01/17      Fixed the multicast bug.
-    1.09        2002/03/07      Move rx-poll-now to re-fill loop.       
-                                Added rio_timer() to watch rx buffers. 
-    1.10        2002/04/16      Fixed miscount of carrier error.
-    1.11        2002/05/23      Added ISR schedule scheme
-                                Fixed miscount of rx frame error for DGE-550SX.
-                                Fixed VLAN bug.
-    1.12        2002/06/13      Lock tx_coalesce=1 on 10/100Mbps mode.
-    1.13        2002/08/13      1. Fix disconnection (many tx:carrier/rx:frame
-                                   errs) with some mainboards.
-                                2. Use definition "DRV_NAME" "DRV_VERSION" 
-                                   "DRV_RELDATE" for flexibility.       
-    1.14        2002/08/14      Support ethtool.        
-    1.15        2002/08/27      Changed the default media to Auto-Negotiation
-                                for the fiber devices.    
-    1.16        2002/09/04      More power down time for fiber devices auto-
-                                negotiation.
-                                Fix disconnect bug after ifup and ifdown.
-    1.17        2002/10/03      Fix RMON statistics overflow. 
-                                Always use I/O mapping to access eeprom, 
-                                avoid system freezing with some chipsets.
 
-*/
 #define DRV_NAME        "D-Link DL2000-based linux driver"
-#define DRV_VERSION     "v1.17b"
-#define DRV_RELDATE     "2006/03/10"
+#define DRV_VERSION     "v1.18"
+#define DRV_RELDATE     "2006/06/27"
 #include "dl2k.h"
 #include <linux/dma-mapping.h>
 
diff --git a/drivers/net/hamachi.c b/drivers/net/hamachi.c
index 7bcd939c6edd..1b212a56933c 100644
--- a/drivers/net/hamachi.c
+++ b/drivers/net/hamachi.c
@@ -20,22 +20,15 @@
 
         Support and updates available at
         http://www.scyld.com/network/hamachi.html
+        [link no longer provides useful info -jgarzik]
         or
         http://www.parl.clemson.edu/~keithu/hamachi.html
 
-
-
-        Linux kernel changelog:
-
-        LK1.0.1:
-        - fix lack of pci_dev<->dev association
-        - ethtool support (jgarzik)
-
 */
 
 #define DRV_NAME        "hamachi"
-#define DRV_VERSION     "1.01+LK1.0.1"
-#define DRV_RELDATE     "5/18/2001"
+#define DRV_VERSION     "2.0"
+#define DRV_RELDATE     "June 27, 2006"
 
 
 /* A few user-configurable values. */
diff --git a/drivers/net/natsemi.c b/drivers/net/natsemi.c
index 9df2628be1e7..db0475a1102f 100644
--- a/drivers/net/natsemi.c
+++ b/drivers/net/natsemi.c
@@ -20,120 +20,9 @@
 
         Support information and updates available at
         http://www.scyld.com/network/netsemi.html
+        [link no longer provides useful info -jgarzik]
 
 
-        Linux kernel modifications:
-
-        Version 1.0.1:
-                - Spinlock fixes
-                - Bug fixes and better intr performance (Tjeerd)
-        Version 1.0.2:
-                - Now reads correct MAC address from eeprom
-        Version 1.0.3:
-                - Eliminate redundant priv->tx_full flag
-                - Call netif_start_queue from dev->tx_timeout
-                - wmb() in start_tx() to flush data
-                - Update Tx locking
-                - Clean up PCI enable (davej)
-        Version 1.0.4:
-                - Merge Donald Becker's natsemi.c version 1.07
-        Version 1.0.5:
-                - { fill me in }
-        Version 1.0.6:
-                * ethtool support (jgarzik)
-                * Proper initialization of the card (which sometimes
-                fails to occur and leaves the card in a non-functional
-                state). (uzi)
-
-                * Some documented register settings to optimize some
-                of the 100Mbit autodetection circuitry in rev C cards. (uzi)
-
-                * Polling of the PHY intr for stuff like link state
-                change and auto- negotiation to finally work properly. (uzi)
-
-                * One-liner removal of a duplicate declaration of
-                netdev_error(). (uzi)
-
-        Version 1.0.7: (Manfred Spraul)
-                * pci dma
-                * SMP locking update
-                * full reset added into tx_timeout
-                * correct multicast hash generation (both big and little endian)
-                        [copied from a natsemi driver version
-                         from Myrio Corporation, Greg Smith]
-                * suspend/resume
-
-        version 1.0.8 (Tim Hockin <thockin@sun.com>)
-                * ETHTOOL_* support
-                * Wake on lan support (Erik Gilling)
-                * MXDMA fixes for serverworks
-                * EEPROM reload
-
-        version 1.0.9 (Manfred Spraul)
-                * Main change: fix lack of synchronize
-                netif_close/netif_suspend against a last interrupt
-                or packet.
-                * do not enable superflous interrupts (e.g. the
-                drivers relies on TxDone - TxIntr not needed)
-                * wait that the hardware has really stopped in close
-                and suspend.
-                * workaround for the (at least) gcc-2.95.1 compiler
-                problem. Also simplifies the code a bit.
-                * disable_irq() in tx_timeout - needed to protect
-                against rx interrupts.
-                * stop the nic before switching into silent rx mode
-                for wol (required according to docu).
-
-        version 1.0.10:
-                * use long for ee_addr (various)
-                * print pointers properly (DaveM)
-                * include asm/irq.h (?)
-
-        version 1.0.11:
-                * check and reset if PHY errors appear (Adrian Sun)
-                * WoL cleanup (Tim Hockin)
-                * Magic number cleanup (Tim Hockin)
-                * Don't reload EEPROM on every reset (Tim Hockin)
-                * Save and restore EEPROM state across reset (Tim Hockin)
-                * MDIO Cleanup (Tim Hockin)
-                * Reformat register offsets/bits (jgarzik)
-
-        version 1.0.12:
-                * ETHTOOL_* further support (Tim Hockin)
-
-        version 1.0.13:
-                * ETHTOOL_[G]EEPROM support (Tim Hockin)
-
-        version 1.0.13:
-                * crc cleanup (Matt Domsch <Matt_Domsch@dell.com>)
-
-        version 1.0.14:
-                * Cleanup some messages and autoneg in ethtool (Tim Hockin)
-
-        version 1.0.15:
-                * Get rid of cable_magic flag
-                * use new (National provided) solution for cable magic issue
-
-        version 1.0.16:
-                * call netdev_rx() for RxErrors (Manfred Spraul)
-                * formatting and cleanups
-                * change options and full_duplex arrays to be zero
-                  initialized
-                * enable only the WoL and PHY interrupts in wol mode
-
-        version 1.0.17:
-                * only do cable_magic on 83815 and early 83816 (Tim Hockin)
-                * create a function for rx refill (Manfred Spraul)
-                * combine drain_ring and init_ring (Manfred Spraul)
-                * oom handling (Manfred Spraul)
-                * hands_off instead of playing with netif_device_{de,a}ttach
-                  (Manfred Spraul)
-                * be sure to write the MAC back to the chip (Manfred Spraul)
-                * lengthen EEPROM timeout, and always warn about timeouts
-                  (Manfred Spraul)
-                * comments update (Manfred)
-                * do the right thing on a phy-reset (Manfred and Tim)
-
         TODO:
         * big endian support with CFG:BEM instead of cpu_to_le32
 */
@@ -165,8 +54,8 @@
 #include <asm/uaccess.h>
 
 #define DRV_NAME        "natsemi"
-#define DRV_VERSION     "1.07+LK1.0.17"
-#define DRV_RELDATE     "Sep 27, 2002"
+#define DRV_VERSION     "2.0"
+#define DRV_RELDATE     "June 27, 2006"
 
 #define RX_OFFSET       2
 
diff --git a/drivers/net/starfire.c b/drivers/net/starfire.c
index ed1f59901ff4..24d55b4591b3 100644
--- a/drivers/net/starfire.c
+++ b/drivers/net/starfire.c
@@ -22,129 +22,13 @@
 
         Support and updates available at
         http://www.scyld.com/network/starfire.html
+        [link no longer provides useful info -jgarzik]
 
-        -----------------------------------------------------------
-
-        Linux kernel-specific changes:
-
-        LK1.1.1 (jgarzik):
-        - Use PCI driver interface
-        - Fix MOD_xxx races
-        - softnet fixups
-
-        LK1.1.2 (jgarzik):
-        - Merge Becker version 0.15
-
-        LK1.1.3 (Andrew Morton)
-        - Timer cleanups
-
-        LK1.1.4 (jgarzik):
-        - Merge Becker version 1.03
-
-        LK1.2.1 (Ion Badulescu <ionut@cs.columbia.edu>)
-        - Support hardware Rx/Tx checksumming
-        - Use the GFP firmware taken from Adaptec's Netware driver
-
-        LK1.2.2 (Ion Badulescu)
-        - Backported to 2.2.x
-
-        LK1.2.3 (Ion Badulescu)
-        - Fix the flaky mdio interface
-        - More compat clean-ups
-
-        LK1.2.4 (Ion Badulescu)
-        - More 2.2.x initialization fixes
-
-        LK1.2.5 (Ion Badulescu)
-        - Several fixes from Manfred Spraul
-
-        LK1.2.6 (Ion Badulescu)
-        - Fixed ifup/ifdown/ifup problem in 2.4.x
-
-        LK1.2.7 (Ion Badulescu)
-        - Removed unused code
-        - Made more functions static and __init
-
-        LK1.2.8 (Ion Badulescu)
-        - Quell bogus error messages, inform about the Tx threshold
-        - Removed #ifdef CONFIG_PCI, this driver is PCI only
-
-        LK1.2.9 (Ion Badulescu)
-        - Merged Jeff Garzik's changes from 2.4.4-pre5
-        - Added 2.2.x compatibility stuff required by the above changes
-
-        LK1.2.9a (Ion Badulescu)
-        - More updates from Jeff Garzik
-
-        LK1.3.0 (Ion Badulescu)
-        - Merged zerocopy support
-
-        LK1.3.1 (Ion Badulescu)
-        - Added ethtool support
-        - Added GPIO (media change) interrupt support
-
-        LK1.3.2 (Ion Badulescu)
-        - Fixed 2.2.x compatibility issues introduced in 1.3.1
-        - Fixed ethtool ioctl returning uninitialized memory
-
-        LK1.3.3 (Ion Badulescu)
-        - Initialize the TxMode register properly
-        - Don't dereference dev->priv after freeing it
-
-        LK1.3.4 (Ion Badulescu)
-        - Fixed initialization timing problems
-        - Fixed interrupt mask definitions
-
-        LK1.3.5 (jgarzik)
-        - ethtool NWAY_RST, GLINK, [GS]MSGLVL support
-
-        LK1.3.6:
-        - Sparc64 support and fixes (Ion Badulescu)
-        - Better stats and error handling (Ion Badulescu)
-        - Use new pci_set_mwi() PCI API function (jgarzik)
-
-        LK1.3.7 (Ion Badulescu)
-        - minimal implementation of tx_timeout()
-        - correctly shutdown the Rx/Tx engines in netdev_close()
-        - added calls to netif_carrier_on/off
-        (patch from Stefan Rompf <srompf@isg.de>)
-        - VLAN support
-
-        LK1.3.8 (Ion Badulescu)
-        - adjust DMA burst size on sparc64
-        - 64-bit support
-        - reworked zerocopy support for 64-bit buffers
-        - working and usable interrupt mitigation/latency
-        - reduced Tx interrupt frequency for lower interrupt overhead
-
-        LK1.3.9 (Ion Badulescu)
-        - bugfix for mcast filter
-        - enable the right kind of Tx interrupts (TxDMADone, not TxDone)
-
-        LK1.4.0 (Ion Badulescu)
-        - NAPI support
-
-        LK1.4.1 (Ion Badulescu)
-        - flush PCI posting buffers after disabling Rx interrupts
-        - put the chip to a D3 slumber on driver unload
-        - added config option to enable/disable NAPI
-
-        LK1.4.2 (Ion Badulescu)
-        - finally added firmware (GPL'ed by Adaptec)
-        - removed compatibility code for 2.2.x
-
-        LK1.4.2.1 (Ion Badulescu)
-        - fixed 32/64 bit issues on i386 + CONFIG_HIGHMEM
-        - added 32-bit padding to outgoing skb's, removed previous workaround
-
-TODO:   - fix forced speed/duplexing code (broken a long time ago, when
-        somebody converted the driver to use the generic MII code)
-        - fix VLAN support
 */
 
 #define DRV_NAME        "starfire"
-#define DRV_VERSION     "1.03+LK1.4.2.1"
-#define DRV_RELDATE     "October 3, 2005"
+#define DRV_VERSION     "2.0"
+#define DRV_RELDATE     "June 27, 2006"
 
 #include <linux/module.h>
 #include <linux/kernel.h>
diff --git a/drivers/net/sundance.c b/drivers/net/sundance.c
index 643fceae3db5..de6645196657 100644
--- a/drivers/net/sundance.c
+++ b/drivers/net/sundance.c
@@ -16,91 +16,13 @@
 
         Support and updates available at
         http://www.scyld.com/network/sundance.html
+        [link no longer provides useful info -jgarzik]
 
-
-        Version LK1.01a (jgarzik):
-        - Replace some MII-related magic numbers with constants
-
-        Version LK1.02 (D-Link):
-        - Add new board to PCI ID list
-        - Fix multicast bug
-
-        Version LK1.03 (D-Link):
-        - New Rx scheme, reduce Rx congestion
-        - Option to disable flow control
-
-        Version LK1.04 (D-Link):
-        - Tx timeout recovery
-        - More support for ethtool.
-
-        Version LK1.04a:
-        - Remove unused/constant members from struct pci_id_info
-        (which then allows removal of 'drv_flags' from private struct)
-        (jgarzik)
-        - If no phy is found, fail to load that board (jgarzik)
-        - Always start phy id scan at id 1 to avoid problems (Donald Becker)
-        - Autodetect where mii_preable_required is needed,
-        default to not needed.  (Donald Becker)
-
-        Version LK1.04b:
-        - Remove mii_preamble_required module parameter (Donald Becker)
-        - Add per-interface mii_preamble_required (setting is autodetected)
-          (Donald Becker)
-        - Remove unnecessary cast from void pointer (jgarzik)
-        - Re-align comments in private struct (jgarzik)
-
-        Version LK1.04c (jgarzik):
-        - Support bitmapped message levels (NETIF_MSG_xxx), and the
-          two ethtool ioctls that get/set them
-        - Don't hand-code MII ethtool support, use standard API/lib
-
-        Version LK1.04d:
-        - Merge from Donald Becker's sundance.c: (Jason Lunz)
-                * proper support for variably-sized MTUs
-                * default to PIO, to fix chip bugs
-        - Add missing unregister_netdev (Jason Lunz)
-        - Add CONFIG_SUNDANCE_MMIO config option (jgarzik)
-        - Better rx buf size calculation (Donald Becker)
-
-        Version LK1.05 (D-Link):
-        - Fix DFE-580TX packet drop issue (for DL10050C)
-        - Fix reset_tx logic
-
-        Version LK1.06 (D-Link):
-        - Fix crash while unloading driver
-
-        Versin LK1.06b (D-Link):
-        - New tx scheme, adaptive tx_coalesce
-        
-        Version LK1.07 (D-Link):
-        - Fix tx bugs in big-endian machines
-        - Remove unused max_interrupt_work module parameter, the new 
-          NAPI-like rx scheme doesn't need it.
-        - Remove redundancy get_stats() in intr_handler(), those 
-          I/O access could affect performance in ARM-based system
-        - Add Linux software VLAN support
-        
-        Version LK1.08 (Philippe De Muyter phdm@macqel.be):
-        - Fix bug of custom mac address 
-        (StationAddr register only accept word write) 
-
-        Version LK1.09 (D-Link):
-        - Fix the flowctrl bug. 
-        - Set Pause bit in MII ANAR if flow control enabled.    
-
-        Version LK1.09a (ICPlus):
-        - Add the delay time in reading the contents of EEPROM
-
-        Version LK1.10 (Philippe De Muyter phdm@macqel.be):
-        - Make 'unblock interface after Tx underrun' work
-
-        Version LK1.11 (Pedro Alejandro Lopez-Valencia palopezv at gmail.com):
-        - Add support for IC Plus Corporation IP100A chipset
 */
 
 #define DRV_NAME        "sundance"
-#define DRV_VERSION     "1.01+LK1.11"
-#define DRV_RELDATE     "14-Jun-2006"
+#define DRV_VERSION     "1.1"
+#define DRV_RELDATE     "27-Jun-2006"
 
 
 /* The user-configurable values.
diff --git a/drivers/net/tulip/xircom_tulip_cb.c b/drivers/net/tulip/xircom_tulip_cb.c
index 091ebb7a62f6..17ca7dc42e6f 100644
--- a/drivers/net/tulip/xircom_tulip_cb.c
+++ b/drivers/net/tulip/xircom_tulip_cb.c
@@ -10,26 +10,11 @@
         410 Severn Ave., Suite 210
         Annapolis MD 21403
 
-        -----------------------------------------------------------
-
-        Linux kernel-specific changes:
-
-        LK1.0 (Ion Badulescu)
-        - Major cleanup
-        - Use 2.4 PCI API
-        - Support ethtool
-        - Rewrite perfect filter/hash code
-        - Use interrupts for media changes
-
-        LK1.1 (Ion Badulescu)
-        - Disallow negotiation of unsupported full-duplex modes
 */
 
 #define DRV_NAME        "xircom_tulip_cb"
-#define DRV_VERSION     "0.91+LK1.1"
-#define DRV_RELDATE     "October 11, 2001"
-
-#define CARDBUS 1
+#define DRV_VERSION     "0.92"
+#define DRV_RELDATE     "June 27, 2006"
 
 /* A few user-configurable values. */
 
@@ -306,10 +291,10 @@ struct xircom_private {
         struct xircom_tx_desc tx_ring[TX_RING_SIZE];
         /* The saved address of a sent-in-place packet/buffer, for skfree(). */
         struct sk_buff* tx_skbuff[TX_RING_SIZE];
-#ifdef CARDBUS
+
         /* The X3201-3 requires 4-byte aligned tx bufs */
         struct sk_buff* tx_aligned_skbuff[TX_RING_SIZE];
-#endif
+
         /* The addresses of receive-in-place skbuffs. */
         struct sk_buff* rx_skbuff[RX_RING_SIZE];
         u16 setup_frame[PKT_SETUP_SZ / sizeof(u16)];    /* Pseudo-Tx frame to init address table. */
@@ -908,10 +893,8 @@ static void xircom_init_ring(struct net_device *dev)
                 tp->tx_skbuff[i] = NULL;
                 tp->tx_ring[i].status = 0;
                 tp->tx_ring[i].buffer2 = virt_to_bus(&tp->tx_ring[i+1]);
-#ifdef CARDBUS
                 if (tp->chip_id == X3201_3)
                         tp->tx_aligned_skbuff[i] = dev_alloc_skb(PKT_BUF_SZ);
-#endif /* CARDBUS */
         }
         tp->tx_ring[i-1].buffer2 = virt_to_bus(&tp->tx_ring[0]);
 }
@@ -931,12 +914,10 @@ xircom_start_xmit(struct sk_buff *skb, struct net_device *dev)
         entry = tp->cur_tx % TX_RING_SIZE;
 
         tp->tx_skbuff[entry] = skb;
-#ifdef CARDBUS
         if (tp->chip_id == X3201_3) {
                 memcpy(tp->tx_aligned_skbuff[entry]->data,skb->data,skb->len);
                 tp->tx_ring[entry].buffer1 = virt_to_bus(tp->tx_aligned_skbuff[entry]->data);
         } else
-#endif
                 tp->tx_ring[entry].buffer1 = virt_to_bus(skb->data);
 
         if (tp->cur_tx - tp->dirty_tx < TX_RING_SIZE/2) {/* Typical path */
diff --git a/drivers/net/via-rhine.c b/drivers/net/via-rhine.c
index 98b6f3207d3d..e48e76ce73a0 100644
--- a/drivers/net/via-rhine.c
+++ b/drivers/net/via-rhine.c
@@ -25,117 +25,13 @@
         version. He may or may not be interested in bug reports on this
         code. You can find his versions at:
         http://www.scyld.com/network/via-rhine.html
-
-
-        Linux kernel version history:
-
-        LK1.1.0:
-        - Jeff Garzik: softnet 'n stuff
-
-        LK1.1.1:
-        - Justin Guyett: softnet and locking fixes
-        - Jeff Garzik: use PCI interface
-
-        LK1.1.2:
-        - Urban Widmark: minor cleanups, merges from Becker 1.03a/1.04 versions
-
-        LK1.1.3:
-        - Urban Widmark: use PCI DMA interface (with thanks to the eepro100.c
-                         code) update "Theory of Operation" with
-                         softnet/locking changes
-        - Dave Miller: PCI DMA and endian fixups
-        - Jeff Garzik: MOD_xxx race fixes, updated PCI resource allocation
-
-        LK1.1.4:
-        - Urban Widmark: fix gcc 2.95.2 problem and
-                         remove writel's to fixed address 0x7c
-
-        LK1.1.5:
-        - Urban Widmark: mdio locking, bounce buffer changes
-                         merges from Beckers 1.05 version
-                         added netif_running_on/off support
-
-        LK1.1.6:
-        - Urban Widmark: merges from Beckers 1.08b version (VT6102 + mdio)
-                         set netif_running_on/off on startup, del_timer_sync
-
-        LK1.1.7:
-        - Manfred Spraul: added reset into tx_timeout
-
-        LK1.1.9:
-        - Urban Widmark: merges from Beckers 1.10 version
-                         (media selection + eeprom reload)
-        - David Vrabel:  merges from D-Link "1.11" version
-                         (disable WOL and PME on startup)
-
-        LK1.1.10:
-        - Manfred Spraul: use "singlecopy" for unaligned buffers
-                          don't allocate bounce buffers for !ReqTxAlign cards
-
-        LK1.1.11:
-        - David Woodhouse: Set dev->base_addr before the first time we call
-                           wait_for_reset(). It's a lot happier that way.
-                           Free np->tx_bufs only if we actually allocated it.
-
-        LK1.1.12:
-        - Martin Eriksson: Allow Memory-Mapped IO to be enabled.
-
-        LK1.1.13 (jgarzik):
-        - Add ethtool support
-        - Replace some MII-related magic numbers with constants
-
-        LK1.1.14 (Ivan G.):
-        - fixes comments for Rhine-III
-        - removes W_MAX_TIMEOUT (unused)
-        - adds HasDavicomPhy for Rhine-I (basis: linuxfet driver; my card
-          is R-I and has Davicom chip, flag is referenced in kernel driver)
-        - sends chip_id as a parameter to wait_for_reset since np is not
-          initialized on first call
-        - changes mmio "else if (chip_id==VT6102)" to "else" so it will work
-          for Rhine-III's (documentation says same bit is correct)
-        - transmit frame queue message is off by one - fixed
-        - adds IntrNormalSummary to "Something Wicked" exclusion list
-          so normal interrupts will not trigger the message (src: Donald Becker)
-        (Roger Luethi)
-        - show confused chip where to continue after Tx error
-        - location of collision counter is chip specific
-        - allow selecting backoff algorithm (module parameter)
-
-        LK1.1.15 (jgarzik):
-        - Use new MII lib helper generic_mii_ioctl
-
-        LK1.1.16 (Roger Luethi)
-        - Etherleak fix
-        - Handle Tx buffer underrun
-        - Fix bugs in full duplex handling
-        - New reset code uses "force reset" cmd on Rhine-II
-        - Various clean ups
-
-        LK1.1.17 (Roger Luethi)
-        - Fix race in via_rhine_start_tx()
-        - On errors, wait for Tx engine to turn off before scavenging
-        - Handle Tx descriptor write-back race on Rhine-II
-        - Force flushing for PCI posted writes
-        - More reset code changes
-
-        LK1.1.18 (Roger Luethi)
-        - No filtering multicast in promisc mode (Edward Peng)
-        - Fix for Rhine-I Tx timeouts
-
-        LK1.1.19 (Roger Luethi)
-        - Increase Tx threshold for unspecified errors
-
-        LK1.2.0-2.6 (Roger Luethi)
-        - Massive clean-up
-        - Rewrite PHY, media handling (remove options, full_duplex, backoff)
-        - Fix Tx engine race for good
-        - Craig Brind: Zero padded aligned buffers for short packets.
+        [link no longer provides useful info -jgarzik]
 
 */
 
 #define DRV_NAME        "via-rhine"
-#define DRV_VERSION     "1.2.0-2.6"
-#define DRV_RELDATE     "June-10-2004"
+#define DRV_VERSION     "1.4.0"
+#define DRV_RELDATE     "June-27-2006"
 
 
 /* A few user-configurable values.
diff --git a/drivers/net/yellowfin.c b/drivers/net/yellowfin.c
index bbbf7e274a2a..207340fe8df9 100644
--- a/drivers/net/yellowfin.c
+++ b/drivers/net/yellowfin.c
@@ -19,37 +19,13 @@
 
         Support and updates available at
         http://www.scyld.com/network/yellowfin.html
+        [link no longer provides useful info -jgarzik]
 
-
-        Linux kernel changelog:
-        -----------------------
-
-        LK1.1.1 (jgarzik): Port to 2.4 kernel
-
-        LK1.1.2 (jgarzik):
-        * Merge in becker version 1.05
-
-        LK1.1.3 (jgarzik):
-        * Various cleanups
-        * Update yellowfin_timer to correctly calculate duplex.
-        (suggested by Manfred Spraul)
-
-        LK1.1.4 (val@nmt.edu):
-        * Fix three endian-ness bugs
-        * Support dual function SYM53C885E ethernet chip
-        
-        LK1.1.5 (val@nmt.edu):
-        * Fix forced full-duplex bug I introduced
-
-        LK1.1.6 (val@nmt.edu):
-        * Only print warning on truly "oversized" packets
-        * Fix theoretical bug on gigabit cards - return to 1.1.3 behavior
-        
 */
 
 #define DRV_NAME        "yellowfin"
-#define DRV_VERSION     "1.05+LK1.1.6"
-#define DRV_RELDATE     "Feb 11, 2002"
+#define DRV_VERSION     "2.0"
+#define DRV_RELDATE     "Jun 27, 2006"
 
 #define PFX DRV_NAME ": "