sky2: add Wake On Lan support

Adds basic magic packet wake on lan support to the sky2 driver.
Note: initial WOL value is based on BIOS settings.

Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

2 files changed, 189 insertions, 47 deletions

diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c
index bf1abf034d8a..f4c0bc19b005 100644
--- a/drivers/net/sky2.c
+++ b/drivers/net/sky2.c
@@ -567,6 +567,73 @@ static void sky2_phy_reinit(struct sky2_port *sky2)
         spin_unlock_bh(&sky2->phy_lock);
 }
 
+/* Put device in state to listen for Wake On Lan */
+static void sky2_wol_init(struct sky2_port *sky2)
+{
+        struct sky2_hw *hw = sky2->hw;
+        unsigned port = sky2->port;
+        enum flow_control save_mode;
+        u16 ctrl;
+        u32 reg1;
+
+        /* Bring hardware out of reset */
+        sky2_write16(hw, B0_CTST, CS_RST_CLR);
+        sky2_write16(hw, SK_REG(port, GMAC_LINK_CTRL), GMLC_RST_CLR);
+
+        sky2_write8(hw, SK_REG(port, GPHY_CTRL), GPC_RST_CLR);
+        sky2_write8(hw, SK_REG(port, GMAC_CTRL), GMC_RST_CLR);
+
+        /* Force to 10/100
+         * sky2_reset will re-enable on resume
+         */
+        save_mode = sky2->flow_mode;
+        ctrl = sky2->advertising;
+
+        sky2->advertising &= ~(ADVERTISED_1000baseT_Half|ADVERTISED_1000baseT_Full);
+        sky2->flow_mode = FC_NONE;
+        sky2_phy_power(hw, port, 1);
+        sky2_phy_reinit(sky2);
+
+        sky2->flow_mode = save_mode;
+        sky2->advertising = ctrl;
+
+        /* Set GMAC to no flow control and auto update for speed/duplex */
+        gma_write16(hw, port, GM_GP_CTRL,
+                    GM_GPCR_FC_TX_DIS|GM_GPCR_TX_ENA|GM_GPCR_RX_ENA|
+                    GM_GPCR_DUP_FULL|GM_GPCR_FC_RX_DIS|GM_GPCR_AU_FCT_DIS);
+
+        /* Set WOL address */
+        memcpy_toio(hw->regs + WOL_REGS(port, WOL_MAC_ADDR),
+                    sky2->netdev->dev_addr, ETH_ALEN);
+
+        /* Turn on appropriate WOL control bits */
+        sky2_write16(hw, WOL_REGS(port, WOL_CTRL_STAT), WOL_CTL_CLEAR_RESULT);
+        ctrl = 0;
+        if (sky2->wol & WAKE_PHY)
+                ctrl |= WOL_CTL_ENA_PME_ON_LINK_CHG|WOL_CTL_ENA_LINK_CHG_UNIT;
+        else
+                ctrl |= WOL_CTL_DIS_PME_ON_LINK_CHG|WOL_CTL_DIS_LINK_CHG_UNIT;
+
+        if (sky2->wol & WAKE_MAGIC)
+                ctrl |= WOL_CTL_ENA_PME_ON_MAGIC_PKT|WOL_CTL_ENA_MAGIC_PKT_UNIT;
+        else
+                ctrl |= WOL_CTL_DIS_PME_ON_MAGIC_PKT|WOL_CTL_DIS_MAGIC_PKT_UNIT;;
+
+        ctrl |= WOL_CTL_DIS_PME_ON_PATTERN|WOL_CTL_DIS_PATTERN_UNIT;
+        sky2_write16(hw, WOL_REGS(port, WOL_CTRL_STAT), ctrl);
+
+        /* Turn on legacy PCI-Express PME mode */
+        sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON);
+        reg1 = sky2_pci_read32(hw, PCI_DEV_REG1);
+        reg1 |= PCI_Y2_PME_LEGACY;
+        sky2_pci_write32(hw, PCI_DEV_REG1, reg1);
+        sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF);
+
+        /* block receiver */
+        sky2_write8(hw, SK_REG(port, RX_GMF_CTRL_T), GMF_RST_SET);
+
+}
+
 static void sky2_mac_init(struct sky2_hw *hw, unsigned port)
 {
         struct sky2_port *sky2 = netdev_priv(hw->dev[port]);
@@ -2404,11 +2471,9 @@ static inline u32 sky2_clk2us(const struct sky2_hw *hw, u32 clk)
 }
 
 
-static int sky2_reset(struct sky2_hw *hw)
+static int __devinit sky2_init(struct sky2_hw *hw)
 {
-        u16 status;
         u8 t8;
-        int i;
 
         sky2_write8(hw, B0_CTST, CS_RST_CLR);
 
@@ -2429,6 +2494,22 @@ static int sky2_reset(struct sky2_hw *hw)
                 return -EOPNOTSUPP;
         }
 
+        hw->pmd_type = sky2_read8(hw, B2_PMD_TYP);
+        hw->ports = 1;
+        t8 = sky2_read8(hw, B2_Y2_HW_RES);
+        if ((t8 & CFG_DUAL_MAC_MSK) == CFG_DUAL_MAC_MSK) {
+                if (!(sky2_read8(hw, B2_Y2_CLK_GATE) & Y2_STATUS_LNK2_INAC))
+                        ++hw->ports;
+        }
+
+        return 0;
+}
+
+static void sky2_reset(struct sky2_hw *hw)
+{
+        u16 status;
+        int i;
+
         /* disable ASF */
         if (hw->chip_id <= CHIP_ID_YUKON_EC) {
                 sky2_write8(hw, B28_Y2_ASF_STAT_CMD, Y2_ASF_RESET);
@@ -2453,14 +2534,6 @@ static int sky2_reset(struct sky2_hw *hw)
                 sky2_pci_write32(hw, PEX_UNC_ERR_STAT, 0xffffffffUL);
 
 
-        hw->pmd_type = sky2_read8(hw, B2_PMD_TYP);
-        hw->ports = 1;
-        t8 = sky2_read8(hw, B2_Y2_HW_RES);
-        if ((t8 & CFG_DUAL_MAC_MSK) == CFG_DUAL_MAC_MSK) {
-                if (!(sky2_read8(hw, B2_Y2_CLK_GATE) & Y2_STATUS_LNK2_INAC))
-                        ++hw->ports;
-        }
-
         sky2_power_on(hw);
 
         for (i = 0; i < hw->ports; i++) {
@@ -2544,7 +2617,37 @@ static int sky2_reset(struct sky2_hw *hw)
         sky2_write8(hw, STAT_TX_TIMER_CTRL, TIM_START);
         sky2_write8(hw, STAT_LEV_TIMER_CTRL, TIM_START);
         sky2_write8(hw, STAT_ISR_TIMER_CTRL, TIM_START);
+}
+
+static inline u8 sky2_wol_supported(const struct sky2_hw *hw)
+{
+        return sky2_is_copper(hw) ? (WAKE_PHY | WAKE_MAGIC) : 0;
+}
+
+static void sky2_get_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
+{
+        const struct sky2_port *sky2 = netdev_priv(dev);
+
+        wol->supported = sky2_wol_supported(sky2->hw);
+        wol->wolopts = sky2->wol;
+}
+
+static int sky2_set_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
+{
+        struct sky2_port *sky2 = netdev_priv(dev);
+        struct sky2_hw *hw = sky2->hw;
 
+        if (wol->wolopts & ~sky2_wol_supported(sky2->hw))
+                return -EOPNOTSUPP;
+
+        sky2->wol = wol->wolopts;
+
+        if (hw->chip_id == CHIP_ID_YUKON_EC_U)
+                sky2_write32(hw, B0_CTST, sky2->wol
+                             ? Y2_HW_WOL_ON : Y2_HW_WOL_OFF);
+
+        if (!netif_running(dev))
+                sky2_wol_init(sky2);
         return 0;
 }
 
@@ -3156,7 +3259,9 @@ static void sky2_get_regs(struct net_device *dev, struct ethtool_regs *regs,
 static const struct ethtool_ops sky2_ethtool_ops = {
         .get_settings = sky2_get_settings,
         .set_settings = sky2_set_settings,
-        .get_drvinfo = sky2_get_drvinfo,
+        .get_drvinfo  = sky2_get_drvinfo,
+        .get_wol      = sky2_get_wol,
+        .set_wol      = sky2_set_wol,
         .get_msglevel = sky2_get_msglevel,
         .set_msglevel = sky2_set_msglevel,
         .nway_reset   = sky2_nway_reset,
@@ -3186,7 +3291,8 @@ static const struct ethtool_ops sky2_ethtool_ops = {
 
 /* Initialize network device */
 static __devinit struct net_device *sky2_init_netdev(struct sky2_hw *hw,
-                                                     unsigned port, int highmem)
+                                                     unsigned port,
+                                                     int highmem, int wol)
 {
         struct sky2_port *sky2;
         struct net_device *dev = alloc_etherdev(sizeof(*sky2));
@@ -3234,6 +3340,7 @@ static __devinit struct net_device *sky2_init_netdev(struct sky2_hw *hw,
         sky2->speed = -1;
         sky2->advertising = sky2_supported_modes(hw);
         sky2->rx_csum = 1;
+        sky2->wol = wol;
 
         spin_lock_init(&sky2->phy_lock);
         sky2->tx_pending = TX_DEF_PENDING;
@@ -3336,12 +3443,24 @@ static int __devinit sky2_test_msi(struct sky2_hw *hw)
         return err;
 }
 
+static int __devinit pci_wake_enabled(struct pci_dev *dev)
+{
+        int pm  = pci_find_capability(dev, PCI_CAP_ID_PM);
+        u16 value;
+
+        if (!pm)
+                return 0;
+        if (pci_read_config_word(dev, pm + PCI_PM_CTRL, &value))
+                return 0;
+        return value & PCI_PM_CTRL_PME_ENABLE;
+}
+
 static int __devinit sky2_probe(struct pci_dev *pdev,
                                 const struct pci_device_id *ent)
 {
         struct net_device *dev;
         struct sky2_hw *hw;
-        int err, using_dac = 0;
+        int err, using_dac = 0, wol_default;
 
         err = pci_enable_device(pdev);
         if (err) {
@@ -3378,6 +3497,8 @@ static int __devinit sky2_probe(struct pci_dev *pdev,
                 }
         }
 
+        wol_default = pci_wake_enabled(pdev) ? WAKE_MAGIC : 0;
+
         err = -ENOMEM;
         hw = kzalloc(sizeof(*hw), GFP_KERNEL);
         if (!hw) {
@@ -3413,7 +3534,7 @@ static int __devinit sky2_probe(struct pci_dev *pdev,
         if (!hw->st_le)
                 goto err_out_iounmap;
 
-        err = sky2_reset(hw);
+        err = sky2_init(hw);
         if (err)
                 goto err_out_iounmap;
 
@@ -3422,7 +3543,9 @@ static int __devinit sky2_probe(struct pci_dev *pdev,
                pdev->irq, yukon2_name[hw->chip_id - CHIP_ID_YUKON_XL],
                hw->chip_id, hw->chip_rev);
 
-        dev = sky2_init_netdev(hw, 0, using_dac);
+        sky2_reset(hw);
+
+        dev = sky2_init_netdev(hw, 0, using_dac, wol_default);
         if (!dev) {
                 err = -ENOMEM;
                 goto err_out_free_pci;
@@ -3457,7 +3580,7 @@ static int __devinit sky2_probe(struct pci_dev *pdev,
         if (hw->ports > 1) {
                 struct net_device *dev1;
 
-                dev1 = sky2_init_netdev(hw, 1, using_dac);
+                dev1 = sky2_init_netdev(hw, 1, using_dac, wol_default);
                 if (!dev1) {
                         printk(KERN_WARNING PFX
                                "allocation of second port failed\n");
@@ -3544,23 +3667,29 @@ static void __devexit sky2_remove(struct pci_dev *pdev)
 static int sky2_suspend(struct pci_dev *pdev, pm_message_t state)
 {
         struct sky2_hw *hw = pci_get_drvdata(pdev);
-        int i;
+        int i, wol = 0;
 
         del_timer_sync(&hw->idle_timer);
         netif_poll_disable(hw->dev[0]);
 
         for (i = 0; i < hw->ports; i++) {
                 struct net_device *dev = hw->dev[i];
+                struct sky2_port *sky2 = netdev_priv(dev);
 
-                if (netif_running(dev)) {
+                if (netif_running(dev))
                         sky2_down(dev);
-                        netif_device_detach(dev);
-                }
+
+                if (sky2->wol)
+                        sky2_wol_init(sky2);
+
+                wol |= sky2->wol;
         }
 
         sky2_write32(hw, B0_IMSK, 0);
         sky2_power_aux(hw);
+
         pci_save_state(pdev);
+        pci_enable_wake(pdev, pci_choose_state(pdev, state), wol);
         pci_set_power_state(pdev, pci_choose_state(pdev, state));
 
         return 0;
@@ -3580,18 +3709,13 @@ static int sky2_resume(struct pci_dev *pdev)
                 goto out;
 
         pci_enable_wake(pdev, PCI_D0, 0);
-
-        err = sky2_reset(hw);
-        if (err)
-                goto out;
+        sky2_reset(hw);
 
         sky2_write32(hw, B0_IMSK, Y2_IS_BASE);
 
         for (i = 0; i < hw->ports; i++) {
                 struct net_device *dev = hw->dev[i];
                 if (netif_running(dev)) {
-                        netif_device_attach(dev);
-
                         err = sky2_up(dev);
                         if (err) {
                                 printk(KERN_ERR PFX "%s: could not up: %d\n",
@@ -3612,6 +3736,35 @@ out:
 }
 #endif
 
+static void sky2_shutdown(struct pci_dev *pdev)
+{
+        struct sky2_hw *hw = pci_get_drvdata(pdev);
+        int i, wol = 0;
+
+        del_timer_sync(&hw->idle_timer);
+        netif_poll_disable(hw->dev[0]);
+
+        for (i = 0; i < hw->ports; i++) {
+                struct net_device *dev = hw->dev[i];
+                struct sky2_port *sky2 = netdev_priv(dev);
+
+                if (sky2->wol) {
+                        wol = 1;
+                        sky2_wol_init(sky2);
+                }
+        }
+
+        if (wol)
+                sky2_power_aux(hw);
+
+        pci_enable_wake(pdev, PCI_D3hot, wol);
+        pci_enable_wake(pdev, PCI_D3cold, wol);
+
+        pci_disable_device(pdev);
+        pci_set_power_state(pdev, PCI_D3hot);
+
+}
+
 static struct pci_driver sky2_driver = {
         .name = DRV_NAME,
         .id_table = sky2_id_table,
@@ -3621,6 +3774,7 @@ static struct pci_driver sky2_driver = {
         .suspend = sky2_suspend,
         .resume = sky2_resume,
 #endif
+        .shutdown = sky2_shutdown,
 };
 
 static int __init sky2_init_module(void)
diff --git a/drivers/net/sky2.h b/drivers/net/sky2.h
index 1f56600aad86..a84584835ee1 100644
--- a/drivers/net/sky2.h
+++ b/drivers/net/sky2.h
@@ -32,6 +32,7 @@ enum pci_dev_reg_1 {
         PCI_Y2_PHY1_COMA = 1<<28, /* Set PHY 1 to Coma Mode (YUKON-2) */
         PCI_Y2_PHY2_POWD = 1<<27, /* Set PHY 2 to Power Down (YUKON-2) */
         PCI_Y2_PHY1_POWD = 1<<26, /* Set PHY 1 to Power Down (YUKON-2) */
+        PCI_Y2_PME_LEGACY= 1<<15, /* PCI Express legacy power management mode */
 };
 
 enum pci_dev_reg_2 {
@@ -837,33 +838,27 @@ enum {
         GMAC_LINK_CTRL  = 0x0f10,/* 16 bit      Link Control Reg */
 
 /* Wake-up Frame Pattern Match Control Registers (YUKON only) */
-
-        WOL_REG_OFFS    = 0x20,/* HW-Bug: Address is + 0x20 against spec. */
-
         WOL_CTRL_STAT   = 0x0f20,/* 16 bit      WOL Control/Status Reg */
         WOL_MATCH_CTL   = 0x0f22,/*  8 bit      WOL Match Control Reg */
         WOL_MATCH_RES   = 0x0f23,/*  8 bit      WOL Match Result Reg */
         WOL_MAC_ADDR    = 0x0f24,/* 32 bit      WOL MAC Address */
-        WOL_PATT_PME    = 0x0f2a,/*  8 bit      WOL PME Match Enable (Yukon-2) */
-        WOL_PATT_ASFM   = 0x0f2b,/*  8 bit      WOL ASF Match Enable (Yukon-2) */
         WOL_PATT_RPTR   = 0x0f2c,/*  8 bit      WOL Pattern Read Pointer */
 
 /* WOL Pattern Length Registers (YUKON only) */
-
         WOL_PATT_LEN_LO = 0x0f30,/* 32 bit      WOL Pattern Length 3..0 */
         WOL_PATT_LEN_HI = 0x0f34,/* 24 bit      WOL Pattern Length 6..4 */
 
 /* WOL Pattern Counter Registers (YUKON only) */
-
-
         WOL_PATT_CNT_0  = 0x0f38,/* 32 bit      WOL Pattern Counter 3..0 */
         WOL_PATT_CNT_4  = 0x0f3c,/* 24 bit      WOL Pattern Counter 6..4 */
 };
+#define WOL_REGS(port, x)       (x + (port)*0x80)
 
 enum {
         WOL_PATT_RAM_1  = 0x1000,/*  WOL Pattern RAM Link 1 */
         WOL_PATT_RAM_2  = 0x1400,/*  WOL Pattern RAM Link 2 */
 };
+#define WOL_PATT_RAM_BASE(port) (WOL_PATT_RAM_1 + (port)*0x400)
 
 enum {
         BASE_GMAC_1     = 0x2800,/* GMAC 1 registers */
@@ -1715,14 +1710,17 @@ enum {
         GM_IS_RX_COMPL  = 1<<0, /* Frame Reception Complete */
 
 #define GMAC_DEF_MSK     GM_IS_TX_FF_UR
+};
 
 /*      GMAC_LINK_CTRL  16 bit  GMAC Link Control Reg (YUKON only) */
-                                                /* Bits 15.. 2: reserved */
+enum {                                          /* Bits 15.. 2: reserved */
         GMLC_RST_CLR    = 1<<1, /* Clear GMAC Link Reset */
         GMLC_RST_SET    = 1<<0, /* Set   GMAC Link Reset */
+};
 
 
 /*      WOL_CTRL_STAT   16 bit  WOL Control/Status Reg */
+enum {
         WOL_CTL_LINK_CHG_OCC            = 1<<15,
         WOL_CTL_MAGIC_PKT_OCC           = 1<<14,
         WOL_CTL_PATTERN_OCC             = 1<<13,
@@ -1741,17 +1739,6 @@ enum {
         WOL_CTL_DIS_PATTERN_UNIT        = 1<<0,
 };
 
-#define WOL_CTL_DEFAULT                         \
-        (WOL_CTL_DIS_PME_ON_LINK_CHG |  \
-        WOL_CTL_DIS_PME_ON_PATTERN |    \
-        WOL_CTL_DIS_PME_ON_MAGIC_PKT |  \
-        WOL_CTL_DIS_LINK_CHG_UNIT |             \
-        WOL_CTL_DIS_PATTERN_UNIT |              \
-        WOL_CTL_DIS_MAGIC_PKT_UNIT)
-
-/*      WOL_MATCH_CTL    8 bit  WOL Match Control Reg */
-#define WOL_CTL_PATT_ENA(x)     (1 << (x))
-
 
 /* Control flags */
 enum {
@@ -1875,6 +1862,7 @@ struct sky2_port {
         u8                   autoneg;   /* AUTONEG_ENABLE, AUTONEG_DISABLE */
         u8                   duplex;    /* DUPLEX_HALF, DUPLEX_FULL */
         u8                   rx_csum;
+        u8                   wol;
         enum flow_control    flow_mode;
         enum flow_control    flow_status;