bnx2: Reorganize timeout constants.

Move all related timeout constants to the same location.  BNX2
prefix is also added to make them more consistent.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Signed-off-by: Benjamin Li <benli@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

2 files changed, 11 insertions, 11 deletions

diff --git a/drivers/net/bnx2.c b/drivers/net/bnx2.c
index a52ffdc3b40a..84563b0b660e 100644
--- a/drivers/net/bnx2.c
+++ b/drivers/net/bnx2.c
@@ -1656,7 +1656,7 @@ bnx2_setup_serdes_phy(struct bnx2 *bp, u8 port)
                  * exchanging base pages plus 3 next pages and
                  * normally completes in about 120 msec.
                  */
-                bp->current_interval = SERDES_AN_TIMEOUT;
+                bp->current_interval = BNX2_SERDES_AN_TIMEOUT;
                 bp->serdes_an_pending = 1;
                 mod_timer(&bp->timer, jiffies + bp->current_interval);
         } else {
@@ -2278,7 +2278,7 @@ bnx2_fw_sync(struct bnx2 *bp, u32 msg_data, int ack, int silent)
                 return 0;
 
         /* wait for an acknowledgement. */
-        for (i = 0; i < (FW_ACK_TIME_OUT_MS / 10); i++) {
+        for (i = 0; i < (BNX2_FW_ACK_TIME_OUT_MS / 10); i++) {
                 msleep(10);
 
                 val = bnx2_shmem_rd(bp, BNX2_FW_MB);
@@ -5705,7 +5705,7 @@ bnx2_5708_serdes_timer(struct bnx2 *bp)
                 bnx2_read_phy(bp, bp->mii_bmcr, &bmcr);
                 if (bmcr & BMCR_ANENABLE) {
                         bnx2_enable_forced_2g5(bp);
-                        bp->current_interval = SERDES_FORCED_TIMEOUT;
+                        bp->current_interval = BNX2_SERDES_FORCED_TIMEOUT;
                 } else {
                         bnx2_disable_forced_2g5(bp);
                         bp->serdes_an_pending = 2;
@@ -6522,7 +6522,7 @@ bnx2_nway_reset(struct net_device *dev)
 
                 spin_lock_bh(&bp->phy_lock);
 
-                bp->current_interval = SERDES_AN_TIMEOUT;
+                bp->current_interval = BNX2_SERDES_AN_TIMEOUT;
                 bp->serdes_an_pending = 1;
                 mod_timer(&bp->timer, jiffies + bp->current_interval);
         }
diff --git a/drivers/net/bnx2.h b/drivers/net/bnx2.h
index 2b9649ae6307..34ca47812af4 100644
--- a/drivers/net/bnx2.h
+++ b/drivers/net/bnx2.h
@@ -6679,8 +6679,6 @@ struct bnx2_napi {
         struct bnx2_tx_ring_info        tx_ring;
 };
 
-#define BNX2_TIMER_INTERVAL                     HZ
-
 struct bnx2 {
         /* Fields used in the tx and intr/napi performance paths are grouped */
         /* together in the beginning of the structure. */
@@ -6728,7 +6726,11 @@ struct bnx2 {
 
         /* End of fields used in the performance code paths. */
 
-        int                     current_interval;
+        unsigned int            current_interval;
+#define BNX2_TIMER_INTERVAL             HZ
+#define BNX2_SERDES_AN_TIMEOUT          (HZ / 3)
+#define BNX2_SERDES_FORCED_TIMEOUT      (HZ / 10)
+
         struct                  timer_list timer;
         struct work_struct      reset_task;
 
@@ -6860,8 +6862,6 @@ struct bnx2 {
 #define PHY_LOOPBACK            2
 
         u8                      serdes_an_pending;
-#define SERDES_AN_TIMEOUT       (HZ / 3)
-#define SERDES_FORCED_TIMEOUT   (HZ / 10)
 
         u8                      mac_addr[8];
 
@@ -6959,14 +6959,14 @@ struct fw_info {
 /* This value (in milliseconds) determines the frequency of the driver
  * issuing the PULSE message code.  The firmware monitors this periodic
  * pulse to determine when to switch to an OS-absent mode. */
-#define DRV_PULSE_PERIOD_MS                 250
+#define BNX2_DRV_PULSE_PERIOD_MS                 250
 
 /* This value (in milliseconds) determines how long the driver should
  * wait for an acknowledgement from the firmware before timing out.  Once
  * the firmware has timed out, the driver will assume there is no firmware
  * running and there won't be any firmware-driver synchronization during a
  * driver reset. */
-#define FW_ACK_TIME_OUT_MS                  1000
+#define BNX2_FW_ACK_TIME_OUT_MS                  1000
 
 
 #define BNX2_DRV_RESET_SIGNATURE                0x00000000