skge/sky2/mv643xx/pxa168: Move the Marvell Ethernet drivers

Move the Marvell Ethernet drivers into drivers/net/ethernet/marvell/
and make the necessary Kconfig and Makefile changes.

CC: Sachin Sanap <ssanap@marvell.com>
CC: Zhangfei Gao <zgao6@marvell.com>
CC: Philip Rakity <prakity@marvell.com>
CC: Mark Brown <markb@marvell.com>
CC: Lennert Buytenhek <buytenh@marvell.com>
CC: Stephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

12 files changed, 120 insertions, 94 deletions

diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 87e7a1217851..cb6c6947b320 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -313,16 +313,6 @@ config BFIN_MAC_USE_HWSTAMP
         help
           To support the IEEE 1588 Precision Time Protocol (PTP), select y here
 
-config PXA168_ETH
-        tristate "Marvell pxa168 ethernet support"
-        depends on CPU_PXA168
-        select PHYLIB
-        help
-          This driver supports the pxa168 Ethernet ports.
-
-          To compile this driver as a module, choose M here. The module
-          will be called pxa168_eth.
-
 config NET_NETX
         tristate "NetX Ethernet support"
         select MII
@@ -803,73 +793,6 @@ config SIS190
           To compile this driver as a module, choose M here: the module
           will be called sis190.  This is recommended.
 
-config SKGE
-        tristate "Marvell Yukon Gigabit Ethernet support"
-        depends on PCI
-        select CRC32
-        ---help---
-          This driver support the Marvell Yukon or SysKonnect SK-98xx/SK-95xx
-          and related Gigabit Ethernet adapters. It is a new smaller driver
-          with better performance and more complete ethtool support.
-
-          It does not support the link failover and network management 
-          features that "portable" vendor supplied sk98lin driver does.
-
-          This driver supports adapters based on the original Yukon chipset:
-          Marvell 88E8001, Belkin F5D5005, CNet GigaCard, DLink DGE-530T,
-          Linksys EG1032/EG1064, 3Com 3C940/3C940B, SysKonnect SK-9871/9872.
-
-          It does not support the newer Yukon2 chipset: a separate driver,
-          sky2, is provided for these adapters.
-
-          To compile this driver as a module, choose M here: the module
-          will be called skge.  This is recommended.
-
-config SKGE_DEBUG
-        bool "Debugging interface"
-        depends on SKGE && DEBUG_FS
-        help
-          This option adds the ability to dump driver state for debugging.
-          The file /sys/kernel/debug/skge/ethX displays the state of the internal
-          transmit and receive rings.
-
-          If unsure, say N.
-
-config SKGE_GENESIS
-       bool "Support for older SysKonnect Genesis boards"
-       depends on SKGE
-       help
-         This enables support for the older and uncommon SysKonnect Genesis
-         chips, which support MII via an external transceiver, instead of
-         an internal one. Disabling this option will save some memory
-         by making code smaller. If unsure say Y.
-
-config SKY2
-        tristate "Marvell Yukon 2 support"
-        depends on PCI
-        select CRC32
-        ---help---
-          This driver supports Gigabit Ethernet adapters based on the
-          Marvell Yukon 2 chipset:
-          Marvell 88E8021/88E8022/88E8035/88E8036/88E8038/88E8050/88E8052/
-          88E8053/88E8055/88E8061/88E8062, SysKonnect SK-9E21D/SK-9S21
-
-          There is companion driver for the older Marvell Yukon and
-          SysKonnect Genesis based adapters: skge.
-
-          To compile this driver as a module, choose M here: the module
-          will be called sky2.  This is recommended.
-
-config SKY2_DEBUG
-        bool "Debugging interface"
-        depends on SKY2 && DEBUG_FS
-        help
-          This option adds the ability to dump driver state for debugging.
-          The file /sys/kernel/debug/sky2/ethX displays the state of the internal
-          transmit and receive rings.
-
-          If unsure, say N.
-
 config VIA_VELOCITY
         tristate "VIA Velocity support"
         depends on PCI
@@ -952,19 +875,6 @@ config UGETH_TX_ON_DEMAND
         bool "Transmit on Demand support"
         depends on UCC_GETH
 
-config MV643XX_ETH
-        tristate "Marvell Discovery (643XX) and Orion ethernet support"
-        depends on (MV64X60 || PPC32 || PLAT_ORION) && INET
-        select INET_LRO
-        select PHYLIB
-        help
-          This driver supports the gigabit ethernet MACs in the
-          Marvell Discovery PPC/MIPS chipset family (MV643XX) and
-          in the Marvell Orion ARM SoC family.
-
-          Some boards that use the Discovery chipset are the Momenco
-          Ocelot C and Jaguar ATX and Pegasos II.
-
 config XILINX_LL_TEMAC
         tristate "Xilinx LL TEMAC (LocalLink Tri-mode Ethernet MAC) driver"
         depends on PPC || MICROBLAZE
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index 141ed251f52c..69ca6a009c59 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -46,8 +46,6 @@ obj-$(CONFIG_GELIC_NET) += ps3_gelic.o
 gelic_wireless-$(CONFIG_GELIC_WIRELESS) += ps3_gelic_wireless.o
 ps3_gelic-objs += ps3_gelic_net.o $(gelic_wireless-y)
 obj-$(CONFIG_TC35815) += tc35815.o
-obj-$(CONFIG_SKGE) += skge.o
-obj-$(CONFIG_SKY2) += sky2.o
 obj-$(CONFIG_SKFP) += skfp/
 obj-$(CONFIG_KS8842)    += ks8842.o
 obj-$(CONFIG_KS8851)    += ks8851.o
@@ -75,7 +73,6 @@ endif
 obj-$(CONFIG_FORCEDETH) += forcedeth.o
 
 obj-$(CONFIG_TSI108_ETH) += tsi108_eth.o
-obj-$(CONFIG_MV643XX_ETH) += mv643xx_eth.o
 ll_temac-objs := ll_temac_main.o ll_temac_mdio.o
 obj-$(CONFIG_XILINX_LL_TEMAC) += ll_temac.o
 obj-$(CONFIG_XILINX_EMACLITE) += xilinx_emaclite.o
@@ -111,7 +108,6 @@ obj-$(CONFIG_MIPS_SIM_NET) += mipsnet.o
 obj-$(CONFIG_TUN) += tun.o
 obj-$(CONFIG_VETH) += veth.o
 obj-$(CONFIG_NET_NETX) += netx-eth.o
-obj-$(CONFIG_PXA168_ETH) += pxa168_eth.o
 obj-$(CONFIG_BFIN_MAC) += bfin_mac.o
 obj-$(CONFIG_DM9000) += dm9000.o
 obj-$(CONFIG_ENC28J60) += enc28j60.o
diff --git a/drivers/net/ethernet/Kconfig b/drivers/net/ethernet/Kconfig
index 0eaf95770ab7..1c447d96d7e5 100644
--- a/drivers/net/ethernet/Kconfig
+++ b/drivers/net/ethernet/Kconfig
@@ -28,6 +28,7 @@ source "drivers/net/ethernet/ibm/Kconfig"
 source "drivers/net/ethernet/intel/Kconfig"
 source "drivers/net/ethernet/i825xx/Kconfig"
 source "drivers/net/ethernet/xscale/Kconfig"
+source "drivers/net/ethernet/marvell/Kconfig"
 source "drivers/net/ethernet/mellanox/Kconfig"
 source "drivers/net/ethernet/myricom/Kconfig"
 source "drivers/net/ethernet/natsemi/Kconfig"
diff --git a/drivers/net/ethernet/Makefile b/drivers/net/ethernet/Makefile
index b5ca872f2444..48c8656b96c2 100644
--- a/drivers/net/ethernet/Makefile
+++ b/drivers/net/ethernet/Makefile
@@ -20,6 +20,7 @@ obj-$(CONFIG_NET_VENDOR_IBM) += ibm/
 obj-$(CONFIG_NET_VENDOR_INTEL) += intel/
 obj-$(CONFIG_NET_VENDOR_I825XX) += i825xx/
 obj-$(CONFIG_NET_VENDOR_XSCALE) += xscale/
+obj-$(CONFIG_NET_VENDOR_MARVELL) += marvell/
 obj-$(CONFIG_NET_VENDOR_MELLANOX) += mellanox/
 obj-$(CONFIG_NET_VENDOR_MYRI) += myricom/
 obj-$(CONFIG_NET_VENDOR_NATSEMI) += natsemi/
diff --git a/drivers/net/ethernet/marvell/Kconfig b/drivers/net/ethernet/marvell/Kconfig
new file mode 100644
index 000000000000..e525408367b6
--- /dev/null
+++ b/drivers/net/ethernet/marvell/Kconfig
@@ -0,0 +1,110 @@
+#
+# Marvell device configuration
+#
+
+config NET_VENDOR_MARVELL
+        bool "Marvell devices"
+        depends on PCI || CPU_PXA168 || MV64X60 || PPC32 || PLAT_ORION || INET
+        ---help---
+          If you have a network (Ethernet) card belonging to this class, say Y
+          and read the Ethernet-HOWTO, available from
+          <http://www.tldp.org/docs.html#howto>.
+
+          Note that the answer to this question doesn't directly affect the
+          kernel: saying N will just cause the configurator to skip all
+          the questions about Marvell devices. If you say Y, you will be
+          asked for your specific card in the following questions.
+
+if NET_VENDOR_MARVELL
+
+config MV643XX_ETH
+        tristate "Marvell Discovery (643XX) and Orion ethernet support"
+        depends on (MV64X60 || PPC32 || PLAT_ORION) && INET
+        select INET_LRO
+        select PHYLIB
+        ---help---
+          This driver supports the gigabit ethernet MACs in the
+          Marvell Discovery PPC/MIPS chipset family (MV643XX) and
+          in the Marvell Orion ARM SoC family.
+
+          Some boards that use the Discovery chipset are the Momenco
+          Ocelot C and Jaguar ATX and Pegasos II.
+
+config PXA168_ETH
+        tristate "Marvell pxa168 ethernet support"
+        depends on CPU_PXA168
+        select PHYLIB
+        ---help---
+          This driver supports the pxa168 Ethernet ports.
+
+          To compile this driver as a module, choose M here. The module
+          will be called pxa168_eth.
+
+config SKGE
+        tristate "Marvell Yukon Gigabit Ethernet support"
+        depends on PCI
+        select CRC32
+        ---help---
+          This driver support the Marvell Yukon or SysKonnect SK-98xx/SK-95xx
+          and related Gigabit Ethernet adapters. It is a new smaller driver
+          with better performance and more complete ethtool support.
+
+          It does not support the link failover and network management
+          features that "portable" vendor supplied sk98lin driver does.
+
+          This driver supports adapters based on the original Yukon chipset:
+          Marvell 88E8001, Belkin F5D5005, CNet GigaCard, DLink DGE-530T,
+          Linksys EG1032/EG1064, 3Com 3C940/3C940B, SysKonnect SK-9871/9872.
+
+          It does not support the newer Yukon2 chipset: a separate driver,
+          sky2, is provided for these adapters.
+
+          To compile this driver as a module, choose M here: the module
+          will be called skge.  This is recommended.
+
+config SKGE_DEBUG
+        bool "Debugging interface"
+        depends on SKGE && DEBUG_FS
+        ---help---
+          This option adds the ability to dump driver state for debugging.
+          The file /sys/kernel/debug/skge/ethX displays the state of the internal
+          transmit and receive rings.
+
+          If unsure, say N.
+
+config SKGE_GENESIS
+        bool "Support for older SysKonnect Genesis boards"
+        depends on SKGE
+        ---help---
+         This enables support for the older and uncommon SysKonnect Genesis
+         chips, which support MII via an external transceiver, instead of
+         an internal one. Disabling this option will save some memory
+         by making code smaller. If unsure say Y.
+
+config SKY2
+        tristate "Marvell Yukon 2 support"
+        depends on PCI
+        select CRC32
+        ---help---
+          This driver supports Gigabit Ethernet adapters based on the
+          Marvell Yukon 2 chipset:
+          Marvell 88E8021/88E8022/88E8035/88E8036/88E8038/88E8050/88E8052/
+          88E8053/88E8055/88E8061/88E8062, SysKonnect SK-9E21D/SK-9S21
+
+          There is companion driver for the older Marvell Yukon and
+          SysKonnect Genesis based adapters: skge.
+
+          To compile this driver as a module, choose M here: the module
+          will be called sky2.  This is recommended.
+
+config SKY2_DEBUG
+        bool "Debugging interface"
+        depends on SKY2 && DEBUG_FS
+        ---help---
+          This option adds the ability to dump driver state for debugging.
+          The file /sys/kernel/debug/sky2/ethX displays the state of the internal
+          transmit and receive rings.
+
+          If unsure, say N.
+
+endif # NET_VENDOR_MARVELL
diff --git a/drivers/net/ethernet/marvell/Makefile b/drivers/net/ethernet/marvell/Makefile
new file mode 100644
index 000000000000..57e3234a37ba
--- /dev/null
+++ b/drivers/net/ethernet/marvell/Makefile
@@ -0,0 +1,8 @@
+#
+# Makefile for the Marvell device drivers.
+#
+
+obj-$(CONFIG_MV643XX_ETH) += mv643xx_eth.o
+obj-$(CONFIG_PXA168_ETH) += pxa168_eth.o
+obj-$(CONFIG_SKGE) += skge.o
+obj-$(CONFIG_SKY2) += sky2.o
diff --git a/drivers/net/mv643xx_eth.c b/drivers/net/ethernet/marvell/mv643xx_eth.c
index 259699983ca5..259699983ca5 100644
--- a/drivers/net/mv643xx_eth.c
+++ b/drivers/net/ethernet/marvell/mv643xx_eth.c
diff --git a/drivers/net/pxa168_eth.c b/drivers/net/ethernet/marvell/pxa168_eth.c
index 1a3033d8e7ed..1a3033d8e7ed 100644
--- a/drivers/net/pxa168_eth.c
+++ b/drivers/net/ethernet/marvell/pxa168_eth.c
diff --git a/drivers/net/skge.c b/drivers/net/ethernet/marvell/skge.c
index 98ec614c5690..98ec614c5690 100644
--- a/drivers/net/skge.c
+++ b/drivers/net/ethernet/marvell/skge.c
diff --git a/drivers/net/skge.h b/drivers/net/ethernet/marvell/skge.h
index a2eb34115844..a2eb34115844 100644
--- a/drivers/net/skge.h
+++ b/drivers/net/ethernet/marvell/skge.h
diff --git a/drivers/net/sky2.c b/drivers/net/ethernet/marvell/sky2.c
index 57339da76326..57339da76326 100644
--- a/drivers/net/sky2.c
+++ b/drivers/net/ethernet/marvell/sky2.c
diff --git a/drivers/net/sky2.h b/drivers/net/ethernet/marvell/sky2.h
index 0af31b8b5f10..0af31b8b5f10 100644
--- a/drivers/net/sky2.h
+++ b/drivers/net/ethernet/marvell/sky2.h