sky2: restore vlan acceleration on reset

If device has to be reset by sky2_restart, then need to restore
the VLAN acceleration settings.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

1 files changed, 19 insertions, 10 deletions

diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c
index f226bcac7d17..3bb60530d4d7 100644
--- a/drivers/net/sky2.c
+++ b/drivers/net/sky2.c
@@ -1159,17 +1159,9 @@ static int sky2_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
 }
 
 #ifdef SKY2_VLAN_TAG_USED
-static void sky2_vlan_rx_register(struct net_device *dev, struct vlan_group *grp)
+static void sky2_set_vlan_mode(struct sky2_hw *hw, u16 port, bool onoff)
 {
-        struct sky2_port *sky2 = netdev_priv(dev);
-        struct sky2_hw *hw = sky2->hw;
-        u16 port = sky2->port;
-
-        netif_tx_lock_bh(dev);
-        napi_disable(&hw->napi);
-
-        sky2->vlgrp = grp;
-        if (grp) {
+        if (onoff) {
                 sky2_write32(hw, SK_REG(port, RX_GMF_CTRL_T),
                              RX_VLAN_STRIP_ON);
                 sky2_write32(hw, SK_REG(port, TX_GMF_CTRL_T),
@@ -1180,6 +1172,19 @@ static void sky2_vlan_rx_register(struct net_device *dev, struct vlan_group *grp
                 sky2_write32(hw, SK_REG(port, TX_GMF_CTRL_T),
                              TX_VLAN_TAG_OFF);
         }
+}
+
+static void sky2_vlan_rx_register(struct net_device *dev, struct vlan_group *grp)
+{
+        struct sky2_port *sky2 = netdev_priv(dev);
+        struct sky2_hw *hw = sky2->hw;
+        u16 port = sky2->port;
+
+        netif_tx_lock_bh(dev);
+        napi_disable(&hw->napi);
+
+        sky2->vlgrp = grp;
+        sky2_set_vlan_mode(hw, port, grp != NULL);
 
         sky2_read32(hw, B0_Y2_SP_LISR);
         napi_enable(&hw->napi);
@@ -1418,6 +1423,10 @@ static int sky2_up(struct net_device *dev)
         sky2_prefetch_init(hw, txqaddr[port], sky2->tx_le_map,
                            TX_RING_SIZE - 1);
 
+#ifdef SKY2_VLAN_TAG_USED
+        sky2_set_vlan_mode(hw, port, sky2->vlgrp != NULL);
+#endif
+
         err = sky2_rx_start(sky2);
         if (err)
                 goto err_out;