Merge branch 'merge'

16 files changed, 107 insertions, 175 deletions

diff --git a/drivers/net/bnx2.c b/drivers/net/bnx2.c
index 5ca99e26660a..54161aef3cac 100644
--- a/drivers/net/bnx2.c
+++ b/drivers/net/bnx2.c
@@ -55,8 +55,8 @@
 
 #define DRV_MODULE_NAME         "bnx2"
 #define PFX DRV_MODULE_NAME     ": "
-#define DRV_MODULE_VERSION      "1.4.39"
-#define DRV_MODULE_RELDATE      "March 22, 2006"
+#define DRV_MODULE_VERSION      "1.4.40"
+#define DRV_MODULE_RELDATE      "May 22, 2006"
 
 #define RUN_AT(x) (jiffies + (x))
 
@@ -2945,7 +2945,7 @@ bnx2_nvram_write(struct bnx2 *bp, u32 offset, u8 *data_buf,
                 int buf_size)
 {
         u32 written, offset32, len32;
-        u8 *buf, start[4], end[4];
+        u8 *buf, start[4], end[4], *flash_buffer = NULL;
         int rc = 0;
         int align_start, align_end;
 
@@ -2985,12 +2985,19 @@ bnx2_nvram_write(struct bnx2 *bp, u32 offset, u8 *data_buf,
                 memcpy(buf + align_start, data_buf, buf_size);
         }
 
+        if (bp->flash_info->buffered == 0) {
+                flash_buffer = kmalloc(264, GFP_KERNEL);
+                if (flash_buffer == NULL) {
+                        rc = -ENOMEM;
+                        goto nvram_write_end;
+                }
+        }
+
         written = 0;
         while ((written < len32) && (rc == 0)) {
                 u32 page_start, page_end, data_start, data_end;
                 u32 addr, cmd_flags;
                 int i;
-                u8 flash_buffer[264];
 
                 /* Find the page_start addr */
                 page_start = offset32 + written;
@@ -3061,7 +3068,7 @@ bnx2_nvram_write(struct bnx2 *bp, u32 offset, u8 *data_buf,
                 }
 
                 /* Loop to write the new data from data_start to data_end */
-                for (addr = data_start; addr < data_end; addr += 4, i++) {
+                for (addr = data_start; addr < data_end; addr += 4, i += 4) {
                         if ((addr == page_end - 4) ||
                                 ((bp->flash_info->buffered) &&
                                  (addr == data_end - 4))) {
@@ -3109,6 +3116,9 @@ bnx2_nvram_write(struct bnx2 *bp, u32 offset, u8 *data_buf,
         }
 
 nvram_write_end:
+        if (bp->flash_info->buffered == 0)
+                kfree(flash_buffer);
+
         if (align_start || align_end)
                 kfree(buf);
         return rc;
diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c
index c99e87838f92..ed15fcaedaf9 100644
--- a/drivers/net/e1000/e1000_main.c
+++ b/drivers/net/e1000/e1000_main.c
@@ -220,6 +220,7 @@ static void e1000_restore_vlan(struct e1000_adapter *adapter);
 static int e1000_suspend(struct pci_dev *pdev, pm_message_t state);
 static int e1000_resume(struct pci_dev *pdev);
 #endif
+static void e1000_shutdown(struct pci_dev *pdev);
 
 #ifdef CONFIG_NET_POLL_CONTROLLER
 /* for netdump / net console */
@@ -235,8 +236,9 @@ static struct pci_driver e1000_driver = {
         /* Power Managment Hooks */
 #ifdef CONFIG_PM
         .suspend  = e1000_suspend,
-        .resume   = e1000_resume
+        .resume   = e1000_resume,
 #endif
+        .shutdown = e1000_shutdown
 };
 
 MODULE_AUTHOR("Intel Corporation, <linux.nics@intel.com>");
@@ -4611,6 +4613,12 @@ e1000_resume(struct pci_dev *pdev)
         return 0;
 }
 #endif
+
+static void e1000_shutdown(struct pci_dev *pdev)
+{
+        e1000_suspend(pdev, PMSG_SUSPEND);
+}
+
 #ifdef CONFIG_NET_POLL_CONTROLLER
 /*
  * Polling 'interrupt' - used by things like netconsole to send skbs
diff --git a/drivers/net/forcedeth.c b/drivers/net/forcedeth.c
index f7235c9bc421..705e1229d89d 100644
--- a/drivers/net/forcedeth.c
+++ b/drivers/net/forcedeth.c
@@ -2891,78 +2891,6 @@ static int nv_open(struct net_device *dev)
                 goto out_drain;
         }
 
-        if (np->msi_flags & NV_MSI_X_CAPABLE) {
-                for (i = 0; i < (np->msi_flags & NV_MSI_X_VECTORS_MASK); i++) {
-                        np->msi_x_entry[i].entry = i;
-                }
-                if ((ret = pci_enable_msix(np->pci_dev, np->msi_x_entry, (np->msi_flags & NV_MSI_X_VECTORS_MASK))) == 0) {
-                        np->msi_flags |= NV_MSI_X_ENABLED;
-                        if (optimization_mode == NV_OPTIMIZATION_MODE_THROUGHPUT) {
-                                /* Request irq for rx handling */
-                                if (request_irq(np->msi_x_entry[NV_MSI_X_VECTOR_RX].vector, &nv_nic_irq_rx, SA_SHIRQ, dev->name, dev) != 0) {
-                                        printk(KERN_INFO "forcedeth: request_irq failed for rx %d\n", ret);
-                                        pci_disable_msix(np->pci_dev);
-                                        np->msi_flags &= ~NV_MSI_X_ENABLED;
-                                        goto out_drain;
-                                }
-                                /* Request irq for tx handling */
-                                if (request_irq(np->msi_x_entry[NV_MSI_X_VECTOR_TX].vector, &nv_nic_irq_tx, SA_SHIRQ, dev->name, dev) != 0) {
-                                        printk(KERN_INFO "forcedeth: request_irq failed for tx %d\n", ret);
-                                        pci_disable_msix(np->pci_dev);
-                                        np->msi_flags &= ~NV_MSI_X_ENABLED;
-                                        goto out_drain;
-                                }
-                                /* Request irq for link and timer handling */
-                                if (request_irq(np->msi_x_entry[NV_MSI_X_VECTOR_OTHER].vector, &nv_nic_irq_other, SA_SHIRQ, dev->name, dev) != 0) {
-                                        printk(KERN_INFO "forcedeth: request_irq failed for link %d\n", ret);
-                                        pci_disable_msix(np->pci_dev);
-                                        np->msi_flags &= ~NV_MSI_X_ENABLED;
-                                        goto out_drain;
-                                }
-
-                                /* map interrupts to their respective vector */
-                                writel(0, base + NvRegMSIXMap0);
-                                writel(0, base + NvRegMSIXMap1);
-                                set_msix_vector_map(dev, NV_MSI_X_VECTOR_RX, NVREG_IRQ_RX_ALL);
-                                set_msix_vector_map(dev, NV_MSI_X_VECTOR_TX, NVREG_IRQ_TX_ALL);
-                                set_msix_vector_map(dev, NV_MSI_X_VECTOR_OTHER, NVREG_IRQ_OTHER);
-                        } else {
-                                /* Request irq for all interrupts */
-                                if (request_irq(np->msi_x_entry[NV_MSI_X_VECTOR_ALL].vector, &nv_nic_irq, SA_SHIRQ, dev->name, dev) != 0) {
-                                        printk(KERN_INFO "forcedeth: request_irq failed %d\n", ret);
-                                        pci_disable_msix(np->pci_dev);
-                                        np->msi_flags &= ~NV_MSI_X_ENABLED;
-                                        goto out_drain;
-                                }
-
-                                /* map interrupts to vector 0 */
-                                writel(0, base + NvRegMSIXMap0);
-                                writel(0, base + NvRegMSIXMap1);
-                        }
-                }
-        }
-        if (ret != 0 && np->msi_flags & NV_MSI_CAPABLE) {
-                if ((ret = pci_enable_msi(np->pci_dev)) == 0) {
-                        np->msi_flags |= NV_MSI_ENABLED;
-                        if (request_irq(np->pci_dev->irq, &nv_nic_irq, SA_SHIRQ, dev->name, dev) != 0) {
-                                printk(KERN_INFO "forcedeth: request_irq failed %d\n", ret);
-                                pci_disable_msi(np->pci_dev);
-                                np->msi_flags &= ~NV_MSI_ENABLED;
-                                goto out_drain;
-                        }
-
-                        /* map interrupts to vector 0 */
-                        writel(0, base + NvRegMSIMap0);
-                        writel(0, base + NvRegMSIMap1);
-                        /* enable msi vector 0 */
-                        writel(NVREG_MSI_VECTOR_0_ENABLED, base + NvRegMSIIrqMask);
-                }
-        }
-        if (ret != 0) {
-                if (request_irq(np->pci_dev->irq, &nv_nic_irq, SA_SHIRQ, dev->name, dev) != 0)
-                        goto out_drain;
-        }
-
         /* ask for interrupts */
         nv_enable_hw_interrupts(dev, np->irqmask);
 
diff --git a/drivers/net/irda/Kconfig b/drivers/net/irda/Kconfig
index 5e6d00752990..cff8598aa800 100644
--- a/drivers/net/irda/Kconfig
+++ b/drivers/net/irda/Kconfig
@@ -33,7 +33,7 @@ config DONGLE
 
 config ESI_DONGLE
         tristate "ESI JetEye PC dongle"
-        depends on DONGLE && IRDA
+        depends on IRTTY_SIR && DONGLE && IRDA
         help
           Say Y here if you want to build support for the Extended Systems
           JetEye PC dongle.  To compile it as a module, choose M here. The ESI
@@ -44,7 +44,7 @@ config ESI_DONGLE
 
 config ACTISYS_DONGLE
         tristate "ACTiSYS IR-220L and IR220L+ dongle"
-        depends on DONGLE && IRDA
+        depends on IRTTY_SIR && DONGLE && IRDA
         help
           Say Y here if you want to build support for the ACTiSYS IR-220L and
           IR220L+ dongles.  To compile it as a module, choose M here. The
@@ -55,7 +55,7 @@ config ACTISYS_DONGLE
 
 config TEKRAM_DONGLE
         tristate "Tekram IrMate 210B dongle"
-        depends on DONGLE && IRDA
+        depends on IRTTY_SIR && DONGLE && IRDA
         help
           Say Y here if you want to build support for the Tekram IrMate 210B
           dongle.  To compile it as a module, choose M here. The Tekram dongle
@@ -66,7 +66,7 @@ config TEKRAM_DONGLE
 
 config TOIM3232_DONGLE
         tristate "TOIM3232 IrDa dongle"
-        depends on DONGLE && IRDA
+        depends on IRTTY_SIR && DONGLE && IRDA
         help
           Say Y here if you want to build support for the Vishay/Temic
           TOIM3232 and TOIM4232 based dongles.
@@ -74,7 +74,7 @@ config TOIM3232_DONGLE
 
 config LITELINK_DONGLE
         tristate "Parallax LiteLink dongle"
-        depends on DONGLE && IRDA
+        depends on IRTTY_SIR && DONGLE && IRDA
         help
           Say Y here if you want to build support for the Parallax Litelink
           dongle.  To compile it as a module, choose M here.  The Parallax
@@ -85,7 +85,7 @@ config LITELINK_DONGLE
 
 config MA600_DONGLE
         tristate "Mobile Action MA600 dongle"
-        depends on DONGLE && IRDA && EXPERIMENTAL
+        depends on IRTTY_SIR && DONGLE && IRDA && EXPERIMENTAL
         help
           Say Y here if you want to build support for the Mobile Action MA600
           dongle.  To compile it as a module, choose M here. The MA600 dongle
@@ -98,7 +98,7 @@ config MA600_DONGLE
 
 config GIRBIL_DONGLE
         tristate "Greenwich GIrBIL dongle"
-        depends on DONGLE && IRDA && EXPERIMENTAL
+        depends on IRTTY_SIR && DONGLE && IRDA && EXPERIMENTAL
         help
           Say Y here if you want to build support for the Greenwich GIrBIL
           dongle.  If you want to compile it as a module, choose M here.
@@ -109,7 +109,7 @@ config GIRBIL_DONGLE
 
 config MCP2120_DONGLE
         tristate "Microchip MCP2120"
-        depends on DONGLE && IRDA && EXPERIMENTAL
+        depends on IRTTY_SIR && DONGLE && IRDA && EXPERIMENTAL
         help
           Say Y here if you want to build support for the Microchip MCP2120
           dongle.  If you want to compile it as a module, choose M here.
@@ -123,7 +123,7 @@ config MCP2120_DONGLE
 
 config OLD_BELKIN_DONGLE
         tristate "Old Belkin dongle"
-        depends on DONGLE && IRDA && EXPERIMENTAL
+        depends on IRTTY_SIR && DONGLE && IRDA && EXPERIMENTAL
         help
           Say Y here if you want to build support for the Adaptec Airport 1000
           and 2000 dongles.  If you want to compile it as a module, choose
@@ -132,7 +132,7 @@ config OLD_BELKIN_DONGLE
 
 config ACT200L_DONGLE
         tristate "ACTiSYS IR-200L dongle"
-        depends on DONGLE && IRDA && EXPERIMENTAL
+        depends on IRTTY_SIR && DONGLE && IRDA && EXPERIMENTAL
         help
           Say Y here if you want to build support for the ACTiSYS IR-200L
           dongle. If you want to compile it as a module, choose M here.
diff --git a/drivers/net/pcmcia/axnet_cs.c b/drivers/net/pcmcia/axnet_cs.c
index 448a09488529..2ea66aca648b 100644
--- a/drivers/net/pcmcia/axnet_cs.c
+++ b/drivers/net/pcmcia/axnet_cs.c
@@ -1691,17 +1691,6 @@ static void do_set_multicast_list(struct net_device *dev)
                 memset(ei_local->mcfilter, 0xFF, 8);
         }
 
-        /* 
-         * DP8390 manuals don't specify any magic sequence for altering
-         * the multicast regs on an already running card. To be safe, we
-         * ensure multicast mode is off prior to loading up the new hash
-         * table. If this proves to be not enough, we can always resort
-         * to stopping the NIC, loading the table and then restarting.
-         */
-         
-        if (netif_running(dev))
-                outb_p(E8390_RXCONFIG, e8390_base + EN0_RXCR);
-
         outb_p(E8390_NODMA + E8390_PAGE1, e8390_base + E8390_CMD);
         for(i = 0; i < 8; i++) 
         {
@@ -1715,6 +1704,8 @@ static void do_set_multicast_list(struct net_device *dev)
                 outb_p(E8390_RXCONFIG | 0x48, e8390_base + EN0_RXCR);
         else
                 outb_p(E8390_RXCONFIG | 0x40, e8390_base + EN0_RXCR);
+
+        outb_p(E8390_NODMA+E8390_PAGE0+E8390_START, e8390_base+E8390_CMD);
 }
 
 /*
diff --git a/drivers/net/pcnet32.c b/drivers/net/pcnet32.c
index 07c31f19c6ba..fc08c4af506c 100644
--- a/drivers/net/pcnet32.c
+++ b/drivers/net/pcnet32.c
@@ -1774,8 +1774,6 @@ static int pcnet32_open(struct net_device *dev)
                 lp->rx_dma_addr[i] = 0;
         }
 
-        pcnet32_free_ring(dev);
-
         /*
          * Switch back to 16bit mode to avoid problems with dumb
          * DOS packet driver after a warm reboot
diff --git a/drivers/net/skge.c b/drivers/net/skge.c
index a70c2b0cc104..5ca5a1b546a1 100644
--- a/drivers/net/skge.c
+++ b/drivers/net/skge.c
@@ -78,8 +78,7 @@ static const struct pci_device_id skge_id_table[] = {
         { PCI_DEVICE(PCI_VENDOR_ID_SYSKONNECT, PCI_DEVICE_ID_SYSKONNECT_GE) },
         { PCI_DEVICE(PCI_VENDOR_ID_SYSKONNECT, PCI_DEVICE_ID_SYSKONNECT_YU) },
         { PCI_DEVICE(PCI_VENDOR_ID_DLINK, PCI_DEVICE_ID_DLINK_DGE510T), },
-        { PCI_DEVICE(PCI_VENDOR_ID_DLINK, 0x4b00) },
-        { PCI_DEVICE(PCI_VENDOR_ID_DLINK, 0x4b01) },
+        { PCI_DEVICE(PCI_VENDOR_ID_DLINK, 0x4b01) },    /* DGE-530T */
         { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4320) },
         { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x5005) }, /* Belkin */
         { PCI_DEVICE(PCI_VENDOR_ID_CNET, PCI_DEVICE_ID_CNET_GIGACARD) },
@@ -402,7 +401,7 @@ static int skge_set_ring_param(struct net_device *dev,
         int err;
 
         if (p->rx_pending == 0 || p->rx_pending > MAX_RX_RING_SIZE ||
-            p->tx_pending == 0 || p->tx_pending > MAX_TX_RING_SIZE)
+            p->tx_pending < MAX_SKB_FRAGS+1 || p->tx_pending > MAX_TX_RING_SIZE)
                 return -EINVAL;
 
         skge->rx_ring.count = p->rx_pending;
@@ -2717,8 +2716,7 @@ static int skge_poll(struct net_device *dev, int *budget)
                 if (control & BMU_OWN)
                         break;
 
-                skb = skge_rx_get(skge, e, control, rd->status,
-                                  le16_to_cpu(rd->csum2));
+                skb = skge_rx_get(skge, e, control, rd->status, rd->csum2);
                 if (likely(skb)) {
                         dev->last_rx = jiffies;
                         netif_receive_skb(skb);
diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c
index 62be6d99d05c..959109609d85 100644
--- a/drivers/net/sky2.c
+++ b/drivers/net/sky2.c
@@ -51,7 +51,7 @@
 #include "sky2.h"
 
 #define DRV_NAME                "sky2"
-#define DRV_VERSION             "1.3"
+#define DRV_VERSION             "1.4"
 #define PFX                     DRV_NAME " "
 
 /*
@@ -105,6 +105,7 @@ MODULE_PARM_DESC(idle_timeout, "Idle timeout workaround for lost interrupts (ms)
 static const struct pci_device_id sky2_id_table[] = {
         { PCI_DEVICE(PCI_VENDOR_ID_SYSKONNECT, 0x9000) },
         { PCI_DEVICE(PCI_VENDOR_ID_SYSKONNECT, 0x9E00) },
+        { PCI_DEVICE(PCI_VENDOR_ID_DLINK, 0x4b00) },    /* DGE-560T */
         { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4340) },
         { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4341) },
         { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4342) },
@@ -235,6 +236,7 @@ static int sky2_set_power_state(struct sky2_hw *hw, pci_power_t state)
                 }
 
                 if (hw->chip_id == CHIP_ID_YUKON_EC_U) {
+                        sky2_write16(hw, B0_CTST, Y2_HW_WOL_ON);
                         sky2_pci_write32(hw, PCI_DEV_REG3, 0);
                         reg1 = sky2_pci_read32(hw, PCI_DEV_REG4);
                         reg1 &= P_ASPM_CONTROL_MSK;
@@ -306,7 +308,7 @@ static void sky2_phy_init(struct sky2_hw *hw, unsigned port)
         u16 ctrl, ct1000, adv, pg, ledctrl, ledover;
 
         if (sky2->autoneg == AUTONEG_ENABLE &&
-            (hw->chip_id != CHIP_ID_YUKON_XL || hw->chip_id == CHIP_ID_YUKON_EC_U)) {
+            !(hw->chip_id == CHIP_ID_YUKON_XL || hw->chip_id == CHIP_ID_YUKON_EC_U)) {
                 u16 ectrl = gm_phy_read(hw, port, PHY_MARV_EXT_CTRL);
 
                 ectrl &= ~(PHY_M_EC_M_DSC_MSK | PHY_M_EC_S_DSC_MSK |
@@ -977,6 +979,7 @@ static int sky2_rx_start(struct sky2_port *sky2)
         struct sky2_hw *hw = sky2->hw;
         unsigned rxq = rxqaddr[sky2->port];
         int i;
+        unsigned thresh;
 
         sky2->rx_put = sky2->rx_next = 0;
         sky2_qset(hw, rxq);
@@ -1001,9 +1004,21 @@ static int sky2_rx_start(struct sky2_port *sky2)
                 sky2_rx_add(sky2, re->mapaddr);
         }
 
-        /* Truncate oversize frames */
-        sky2_write16(hw, SK_REG(sky2->port, RX_GMF_TR_THR), sky2->rx_bufsize - 8);
-        sky2_write32(hw, SK_REG(sky2->port, RX_GMF_CTRL_T), RX_TRUNC_ON);
+
+        /*
+         * The receiver hangs if it receives frames larger than the
+         * packet buffer. As a workaround, truncate oversize frames, but
+         * the register is limited to 9 bits, so if you do frames > 2052
+         * you better get the MTU right!
+         */
+        thresh = (sky2->rx_bufsize - 8) / sizeof(u32);
+        if (thresh > 0x1ff)
+                sky2_write32(hw, SK_REG(sky2->port, RX_GMF_CTRL_T), RX_TRUNC_OFF);
+        else {
+                sky2_write16(hw, SK_REG(sky2->port, RX_GMF_TR_THR), thresh);
+                sky2_write32(hw, SK_REG(sky2->port, RX_GMF_CTRL_T), RX_TRUNC_ON);
+        }
+
 
         /* Tell chip about available buffers */
         sky2_write16(hw, Y2_QADDR(rxq, PREF_UNIT_PUT_IDX), sky2->rx_put);
@@ -1020,19 +1035,26 @@ static int sky2_up(struct net_device *dev)
         struct sky2_hw *hw = sky2->hw;
         unsigned port = sky2->port;
         u32 ramsize, rxspace, imask;
-        int err;
+        int cap, err = -ENOMEM;
         struct net_device *otherdev = hw->dev[sky2->port^1];
 
-        /* Block bringing up both ports at the same time on a dual port card.
-         * There is an unfixed bug where receiver gets confused and picks up
-         * packets out of order. Until this is fixed, prevent data corruption.
+        /*
+         * On dual port PCI-X card, there is an problem where status
+         * can be received out of order due to split transactions
          */
-        if (otherdev && netif_running(otherdev)) {
-                printk(KERN_INFO PFX "dual port support is disabled.\n");
-                return -EBUSY;
-        }
+        if (otherdev && netif_running(otherdev) &&
+            (cap = pci_find_capability(hw->pdev, PCI_CAP_ID_PCIX))) {
+                struct sky2_port *osky2 = netdev_priv(otherdev);
+                u16 cmd;
+
+                cmd = sky2_pci_read16(hw, cap + PCI_X_CMD);
+                cmd &= ~PCI_X_CMD_MAX_SPLIT;
+                sky2_pci_write16(hw, cap + PCI_X_CMD, cmd);
+
+                sky2->rx_csum = 0;
+                osky2->rx_csum = 0;
+        }
 
-        err = -ENOMEM;
         if (netif_msg_ifup(sky2))
                 printk(KERN_INFO PFX "%s: enabling interface\n", dev->name);
 
@@ -1910,6 +1932,12 @@ static inline void sky2_tx_done(struct net_device *dev, u16 last)
         }
 }
 
+/* Is status ring empty or is there more to do? */
+static inline int sky2_more_work(const struct sky2_hw *hw)
+{
+        return (hw->st_idx != sky2_read16(hw, STAT_PUT_IDX));
+}
+
 /* Process status response ring */
 static int sky2_status_intr(struct sky2_hw *hw, int to_do)
 {
@@ -2182,19 +2210,19 @@ static int sky2_poll(struct net_device *dev0, int *budget)
         if (status & Y2_IS_CHK_TXA2)
                 sky2_descriptor_error(hw, 1, "transmit", Y2_IS_CHK_TXA2);
 
-        if (status & Y2_IS_STAT_BMU)
-                sky2_write32(hw, STAT_CTRL, SC_STAT_CLR_IRQ);
-
         work_done = sky2_status_intr(hw, work_limit);
         *budget -= work_done;
         dev0->quota -= work_done;
 
-        if (work_done >= work_limit)
+        if (status & Y2_IS_STAT_BMU)
+                sky2_write32(hw, STAT_CTRL, SC_STAT_CLR_IRQ);
+
+        if (sky2_more_work(hw))
                 return 1;
 
         netif_rx_complete(dev0);
 
-        status = sky2_read32(hw, B0_Y2_SP_LISR);
+        sky2_read32(hw, B0_Y2_SP_LISR);
         return 0;
 }
 
@@ -3078,12 +3106,7 @@ static __devinit struct net_device *sky2_init_netdev(struct sky2_hw *hw,
         sky2->duplex = -1;
         sky2->speed = -1;
         sky2->advertising = sky2_supported_modes(hw);
-
-        /* Receive checksum disabled for Yukon XL
-         * because of observed problems with incorrect
-         * values when multiple packets are received in one interrupt
-         */
-        sky2->rx_csum = (hw->chip_id != CHIP_ID_YUKON_XL);
+        sky2->rx_csum = 1;
 
         spin_lock_init(&sky2->phy_lock);
         sky2->tx_pending = TX_DEF_PENDING;
diff --git a/drivers/net/sky2.h b/drivers/net/sky2.h
index 8012994c9b93..8a0bc5525f0a 100644
--- a/drivers/net/sky2.h
+++ b/drivers/net/sky2.h
@@ -214,6 +214,8 @@ enum csr_regs {
 enum {
         Y2_VMAIN_AVAIL  = 1<<17,/* VMAIN available (YUKON-2 only) */
         Y2_VAUX_AVAIL   = 1<<16,/* VAUX available (YUKON-2 only) */
+        Y2_HW_WOL_ON    = 1<<15,/* HW WOL On  (Yukon-EC Ultra A1 only) */
+        Y2_HW_WOL_OFF   = 1<<14,/* HW WOL On  (Yukon-EC Ultra A1 only) */
         Y2_ASF_ENABLE   = 1<<13,/* ASF Unit Enable (YUKON-2 only) */
         Y2_ASF_DISABLE  = 1<<12,/* ASF Unit Disable (YUKON-2 only) */
         Y2_CLK_RUN_ENA  = 1<<11,/* CLK_RUN Enable  (YUKON-2 only) */
diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c
index e1b33a25a25f..49ad60b72657 100644
--- a/drivers/net/tg3.c
+++ b/drivers/net/tg3.c
@@ -69,8 +69,8 @@
 
 #define DRV_MODULE_NAME         "tg3"
 #define PFX DRV_MODULE_NAME     ": "
-#define DRV_MODULE_VERSION      "3.57"
-#define DRV_MODULE_RELDATE      "Apr 28, 2006"
+#define DRV_MODULE_VERSION      "3.58"
+#define DRV_MODULE_RELDATE      "May 22, 2006"
 
 #define TG3_DEF_MAC_MODE        0
 #define TG3_DEF_RX_MODE         0
@@ -6488,6 +6488,10 @@ static void tg3_periodic_fetch_stats(struct tg3 *tp)
         TG3_STAT_ADD32(&sp->rx_frame_too_long_errors, MAC_RX_STATS_FRAME_TOO_LONG);
         TG3_STAT_ADD32(&sp->rx_jabbers, MAC_RX_STATS_JABBERS);
         TG3_STAT_ADD32(&sp->rx_undersize_packets, MAC_RX_STATS_UNDERSIZE);
+
+        TG3_STAT_ADD32(&sp->rxbds_empty, RCVLPC_NO_RCV_BD_CNT);
+        TG3_STAT_ADD32(&sp->rx_discards, RCVLPC_IN_DISCARDS_CNT);
+        TG3_STAT_ADD32(&sp->rx_errors, RCVLPC_IN_ERRORS_CNT);
 }
 
 static void tg3_timer(unsigned long __opaque)
diff --git a/drivers/net/tulip/winbond-840.c b/drivers/net/tulip/winbond-840.c
index ba05dedf29d3..136a70c4d5e4 100644
--- a/drivers/net/tulip/winbond-840.c
+++ b/drivers/net/tulip/winbond-840.c
@@ -850,7 +850,7 @@ static void init_rxtx_rings(struct net_device *dev)
                         break;
                 skb->dev = dev;                 /* Mark as being used by this device. */
                 np->rx_addr[i] = pci_map_single(np->pci_dev,skb->data,
-                                        skb->len,PCI_DMA_FROMDEVICE);
+                                        np->rx_buf_sz,PCI_DMA_FROMDEVICE);
 
                 np->rx_ring[i].buffer1 = np->rx_addr[i];
                 np->rx_ring[i].status = DescOwn;
@@ -1316,7 +1316,7 @@ static int netdev_rx(struct net_device *dev)
                         skb->dev = dev;                 /* Mark as being used by this device. */
                         np->rx_addr[entry] = pci_map_single(np->pci_dev,
                                                         skb->data,
-                                                        skb->len, PCI_DMA_FROMDEVICE);
+                                                        np->rx_buf_sz, PCI_DMA_FROMDEVICE);
                         np->rx_ring[entry].buffer1 = np->rx_addr[entry];
                 }
                 wmb();
diff --git a/drivers/net/via-rhine.c b/drivers/net/via-rhine.c
index a6dc53b4250d..fdc21037f6dc 100644
--- a/drivers/net/via-rhine.c
+++ b/drivers/net/via-rhine.c
@@ -491,8 +491,6 @@ struct rhine_private {
         u8 tx_thresh, rx_thresh;
 
         struct mii_if_info mii_if;
-        struct work_struct tx_timeout_task;
-        struct work_struct check_media_task;
         void __iomem *base;
 };
 
@@ -500,8 +498,6 @@ static int  mdio_read(struct net_device *dev, int phy_id, int location);
 static void mdio_write(struct net_device *dev, int phy_id, int location, int value);
 static int  rhine_open(struct net_device *dev);
 static void rhine_tx_timeout(struct net_device *dev);
-static void rhine_tx_timeout_task(struct net_device *dev);
-static void rhine_check_media_task(struct net_device *dev);
 static int  rhine_start_tx(struct sk_buff *skb, struct net_device *dev);
 static irqreturn_t rhine_interrupt(int irq, void *dev_instance, struct pt_regs *regs);
 static void rhine_tx(struct net_device *dev);
@@ -856,12 +852,6 @@ static int __devinit rhine_init_one(struct pci_dev *pdev,
         if (rp->quirks & rqRhineI)
                 dev->features |= NETIF_F_SG|NETIF_F_HW_CSUM;
 
-        INIT_WORK(&rp->tx_timeout_task,
-                  (void (*)(void *))rhine_tx_timeout_task, dev);
-
-        INIT_WORK(&rp->check_media_task,
-                  (void (*)(void *))rhine_check_media_task, dev);
-
         /* dev->name not defined before register_netdev()! */
         rc = register_netdev(dev);
         if (rc)
@@ -1108,11 +1098,6 @@ static void rhine_set_carrier(struct mii_if_info *mii)
                        netif_carrier_ok(mii->dev));
 }
 
-static void rhine_check_media_task(struct net_device *dev)
-{
-        rhine_check_media(dev, 0);
-}
-
 static void init_registers(struct net_device *dev)
 {
         struct rhine_private *rp = netdev_priv(dev);
@@ -1166,8 +1151,8 @@ static void rhine_disable_linkmon(void __iomem *ioaddr, u32 quirks)
         if (quirks & rqRhineI) {
                 iowrite8(0x01, ioaddr + MIIRegAddr);    // MII_BMSR
 
-                /* Do not call from ISR! */
-                msleep(1);
+                /* Can be called from ISR. Evil. */
+                mdelay(1);
 
                 /* 0x80 must be set immediately before turning it off */
                 iowrite8(0x80, ioaddr + MIICmd);
@@ -1257,16 +1242,6 @@ static int rhine_open(struct net_device *dev)
 static void rhine_tx_timeout(struct net_device *dev)
 {
         struct rhine_private *rp = netdev_priv(dev);
-
-        /*
-         * Move bulk of work outside of interrupt context
-         */
-        schedule_work(&rp->tx_timeout_task);
-}
-
-static void rhine_tx_timeout_task(struct net_device *dev)
-{
-        struct rhine_private *rp = netdev_priv(dev);
         void __iomem *ioaddr = rp->base;
 
         printk(KERN_WARNING "%s: Transmit timed out, status %4.4x, PHY status "
@@ -1677,7 +1652,7 @@ static void rhine_error(struct net_device *dev, int intr_status)
         spin_lock(&rp->lock);
 
         if (intr_status & IntrLinkChange)
-                schedule_work(&rp->check_media_task);
+                rhine_check_media(dev, 0);
         if (intr_status & IntrStatsMax) {
                 rp->stats.rx_crc_errors += ioread16(ioaddr + RxCRCErrs);
                 rp->stats.rx_missed_errors += ioread16(ioaddr + RxMissed);
@@ -1927,9 +1902,6 @@ static int rhine_close(struct net_device *dev)
         spin_unlock_irq(&rp->lock);
 
         free_irq(rp->pdev->irq, dev);
-
-        flush_scheduled_work();
-
         free_rbufs(dev);
         free_tbufs(dev);
         free_ring(dev);
diff --git a/drivers/net/wireless/arlan-main.c b/drivers/net/wireless/arlan-main.c
index 0e1ac338cac1..bed6823d9809 100644
--- a/drivers/net/wireless/arlan-main.c
+++ b/drivers/net/wireless/arlan-main.c
@@ -1838,7 +1838,7 @@ struct net_device * __init arlan_probe(int unit)
 }
 
 #ifdef  MODULE
-int init_module(void)
+int __init init_module(void)
 {
         int i = 0;
 
@@ -1860,7 +1860,7 @@ int init_module(void)
 }
 
 
-void cleanup_module(void)
+void __exit cleanup_module(void)
 {
         int i = 0;
         struct net_device *dev;
diff --git a/drivers/net/wireless/bcm43xx/bcm43xx_main.c b/drivers/net/wireless/bcm43xx/bcm43xx_main.c
index e2982a83ae42..7ed18cad29f7 100644
--- a/drivers/net/wireless/bcm43xx/bcm43xx_main.c
+++ b/drivers/net/wireless/bcm43xx/bcm43xx_main.c
@@ -3271,6 +3271,9 @@ static int bcm43xx_init_board(struct bcm43xx_private *bcm)
         bcm43xx_sysfs_register(bcm);
         //FIXME: check for bcm43xx_sysfs_register failure. This function is a bit messy regarding unwinding, though...
 
+        /*FIXME: This should be handled by softmac instead. */
+        schedule_work(&bcm->softmac->associnfo.work);
+
         assert(err == 0);
 out:
         return err;
@@ -3946,9 +3949,6 @@ static int bcm43xx_resume(struct pci_dev *pdev)
 
         netif_device_attach(net_dev);
         
-        /*FIXME: This should be handled by softmac instead. */
-        schedule_work(&bcm->softmac->associnfo.work);
-
         dprintk(KERN_INFO PFX "Device resumed.\n");
 
         return 0;
diff --git a/drivers/net/wireless/orinoco.c b/drivers/net/wireless/orinoco.c
index 06523e2a8471..c2d0b09e0418 100644
--- a/drivers/net/wireless/orinoco.c
+++ b/drivers/net/wireless/orinoco.c
@@ -812,7 +812,6 @@ static void orinoco_rx_monitor(struct net_device *dev, u16 rxfid,
         if (datalen > IEEE80211_DATA_LEN + 12) {
                 printk(KERN_DEBUG "%s: oversized monitor frame, "
                        "data length = %d\n", dev->name, datalen);
-                err = -EIO;
                 stats->rx_length_errors++;
                 goto update_stats;
         }
@@ -821,8 +820,7 @@ static void orinoco_rx_monitor(struct net_device *dev, u16 rxfid,
         if (!skb) {
                 printk(KERN_WARNING "%s: Cannot allocate skb for monitor frame\n",
                        dev->name);
-                err = -ENOMEM;
-                goto drop;
+                goto update_stats;
         }
 
         /* Copy the 802.11 header to the skb */
diff --git a/drivers/net/wireless/wavelan.c b/drivers/net/wireless/wavelan.c
index ff192e96268a..dade4b903579 100644
--- a/drivers/net/wireless/wavelan.c
+++ b/drivers/net/wireless/wavelan.c
@@ -4306,7 +4306,7 @@ out:
  * Insertion of the module
  * I'm now quite proud of the multi-device support.
  */
-int init_module(void)
+int __init init_module(void)
 {
         int ret = -EIO;         /* Return error if no cards found */
         int i;