wireless/orinoco: remove changelog, bump version

2 files changed, 1 insertions, 374 deletions

diff --git a/drivers/net/wireless/orinoco.c b/drivers/net/wireless/orinoco.c
index 05c2ad556506..aabcdc2be05e 100644
--- a/drivers/net/wireless/orinoco.c
+++ b/drivers/net/wireless/orinoco.c
@@ -46,382 +46,9 @@
  * under either the MPL or the GPL.  */
 
 /*
- * v0.01 -> v0.02 - 21/3/2001 - Jean II
- *      o Allow to use regular ethX device name instead of dldwdX
- *      o Warning on IBSS with ESSID=any for firmware 6.06
- *      o Put proper range.throughput values (optimistic)
- *      o IWSPY support (IOCTL and stat gather in Rx path)
- *      o Allow setting frequency in Ad-Hoc mode
- *      o Disable WEP setting if !has_wep to work on old firmware
- *      o Fix txpower range
- *      o Start adding support for Samsung/Compaq firmware
- *
- * v0.02 -> v0.03 - 23/3/2001 - Jean II
- *      o Start adding Symbol support - need to check all that
- *      o Fix Prism2/Symbol WEP to accept 128 bits keys
- *      o Add Symbol WEP (add authentication type)
- *      o Add Prism2/Symbol rate
- *      o Add PM timeout (holdover duration)
- *      o Enable "iwconfig eth0 key off" and friends (toggle flags)
- *      o Enable "iwconfig eth0 power unicast/all" (toggle flags)
- *      o Try with an Intel card. It report firmware 1.01, behave like
- *        an antiquated firmware, however on windows it says 2.00. Yuck !
- *      o Workaround firmware bug in allocate buffer (Intel 1.01)
- *      o Finish external renaming to orinoco...
- *      o Testing with various Wavelan firmwares
- *
- * v0.03 -> v0.04 - 30/3/2001 - Jean II
- *      o Update to Wireless 11 -> add retry limit/lifetime support
- *      o Tested with a D-Link DWL 650 card, fill in firmware support
- *      o Warning on Vcc mismatch (D-Link 3.3v card in Lucent 5v only slot)
- *      o Fixed the Prism2 WEP bugs that I introduced in v0.03 :-(
- *        It works on D-Link *only* after a tcpdump. Weird...
- *        And still doesn't work on Intel card. Grrrr...
- *      o Update the mode after a setport3
- *      o Add preamble setting for Symbol cards (not yet enabled)
- *      o Don't complain as much about Symbol cards...
- *
- * v0.04 -> v0.04b - 22/4/2001 - David Gibson
- *      o Removed the 'eth' parameter - always use ethXX as the
- *        interface name instead of dldwdXX.  The other was racy
- *        anyway.
- *      o Clean up RID definitions in hermes.h, other cleanups
- *
- * v0.04b -> v0.04c - 24/4/2001 - Jean II
- *      o Tim Hurley <timster AT seiki.bliztech.com> reported a D-Link card
- *        with vendor 02 and firmware 0.08. Added in the capabilities...
- *      o Tested Lucent firmware 7.28, everything works...
- *
- * v0.04c -> v0.05 - 3/5/2001 - Benjamin Herrenschmidt
- *      o Spin-off Pcmcia code. This file is renamed orinoco.c,
- *        and orinoco_cs.c now contains only the Pcmcia specific stuff
- *      o Add Airport driver support on top of orinoco.c (see airport.c)
- *
- * v0.05 -> v0.05a - 4/5/2001 - Jean II
- *      o Revert to old Pcmcia code to fix breakage of Ben's changes...
- *
- * v0.05a -> v0.05b - 4/5/2001 - Jean II
- *      o add module parameter 'ignore_cis_vcc' for D-Link @ 5V
- *      o D-Link firmware doesn't support multicast. We just print a few
- *        error messages, but otherwise everything works...
- *      o For David : set/getport3 works fine, just upgrade iwpriv...
- *
- * v0.05b -> v0.05c - 5/5/2001 - Benjamin Herrenschmidt
- *      o Adapt airport.c to latest changes in orinoco.c
- *      o Remove deferred power enabling code
- *
- * v0.05c -> v0.05d - 5/5/2001 - Jean II
- *      o Workaround to SNAP decapsulate frame from Linksys AP
- *        original patch from : Dong Liu <dliu AT research.bell-labs.com>
- *        (note : the memcmp bug was mine - fixed)
- *      o Remove set_retry stuff, no firmware support it (bloat--).
- *
- * v0.05d -> v0.06 - 25/5/2001 - Jean II
- *              Original patch from "Hong Lin" <alin AT redhat.com>,
- *              "Ian Kinner" <ikinner AT redhat.com>
- *              and "David Smith" <dsmith AT redhat.com>
- *      o Init of priv->tx_rate_ctrl in firmware specific section.
- *      o Prism2/Symbol rate, upto should be 0xF and not 0x15. Doh !
- *      o Spectrum card always need cor_reset (for every reset)
- *      o Fix cor_reset to not lose bit 7 in the register
- *      o flush_stale_links to remove zombie Pcmcia instances
- *      o Ack previous hermes event before reset
- *              Me (with my little hands)
- *      o Allow orinoco.c to call cor_reset via priv->card_reset_handler
- *      o Add priv->need_card_reset to toggle this feature
- *      o Fix various buglets when setting WEP in Symbol firmware
- *        Now, encryption is fully functional on Symbol cards. Youpi !
- *
- * v0.06 -> v0.06b - 25/5/2001 - Jean II
- *      o IBSS on Symbol use port_mode = 4. Please don't ask...
- *
- * v0.06b -> v0.06c - 29/5/2001 - Jean II
- *      o Show first spy address in /proc/net/wireless for IBSS mode as well
- *
- * v0.06c -> v0.06d - 6/7/2001 - David Gibson
- *      o Change a bunch of KERN_INFO messages to KERN_DEBUG, as per Linus'
- *        wishes to reduce the number of unnecessary messages.
- *      o Removed bogus message on CRC error.
- *      o Merged fixes for v0.08 Prism 2 firmware from William Waghorn
- *        <willwaghorn AT yahoo.co.uk>
- *      o Slight cleanup/re-arrangement of firmware detection code.
- *
- * v0.06d -> v0.06e - 1/8/2001 - David Gibson
- *      o Removed some redundant global initializers (orinoco_cs.c).
- *      o Added some module metadata
- *
- * v0.06e -> v0.06f - 14/8/2001 - David Gibson
- *      o Wording fix to license
- *      o Added a 'use_alternate_encaps' module parameter for APs which need an
- *        oui of 00:00:00.  We really need a better way of handling this, but
- *        the module flag is better than nothing for now.
- *
- * v0.06f -> v0.07 - 20/8/2001 - David Gibson
- *      o Removed BAP error retries from hermes_bap_seek().  For Tx we now
- *        let the upper layers handle the retry, we retry explicitly in the
- *        Rx path, but don't make as much noise about it.
- *      o Firmware detection cleanups.
- *
- * v0.07 -> v0.07a - 1/10/3001 - Jean II
- *      o Add code to read Symbol firmware revision, inspired by latest code
- *        in Spectrum24 by Lee John Keyser-Allen - Thanks Lee !
- *      o Thanks to Jared Valentine <hidden AT xmission.com> for "providing" me
- *        a 3Com card with a recent firmware, fill out Symbol firmware
- *        capabilities of latest rev (2.20), as well as older Symbol cards.
- *      o Disable Power Management in newer Symbol firmware, the API 
- *        has changed (documentation needed).
- *
- * v0.07a -> v0.08 - 3/10/2001 - David Gibson
- *      o Fixed a possible buffer overrun found by the Stanford checker (in
- *        dldwd_ioctl_setiwencode()).  Can only be called by root anyway, so not
- *        a big problem.
- *      o Turned has_big_wep on for Intersil cards.  That's not true for all of
- *        them but we should at least let the capable ones try.
- *      o Wait for BUSY to clear at the beginning of hermes_bap_seek().  I
- *        realized that my assumption that the driver's serialization
- *        would prevent the BAP being busy on entry was possibly false, because
- *        things other than seeks may make the BAP busy.
- *      o Use "alternate" (oui 00:00:00) encapsulation by default.
- *        Setting use_old_encaps will mimic the old behaviour, but I think we
- *        will be able to eliminate this.
- *      o Don't try to make __initdata const (the version string).  This can't
- *        work because of the way the __initdata sectioning works.
- *      o Added MODULE_LICENSE tags.
- *      o Support for PLX (transparent PCMCIA->PCI bridge) cards.
- *      o Changed to using the new type-fascist min/max.
- *
- * v0.08 -> v0.08a - 9/10/2001 - David Gibson
- *      o Inserted some missing acknowledgements/info into the Changelog.
- *      o Fixed some bugs in the normalization of signal level reporting.
- *      o Fixed bad bug in WEP key handling on Intersil and Symbol firmware,
- *        which led to an instant crash on big-endian machines.
- *
- * v0.08a -> v0.08b - 20/11/2001 - David Gibson
- *      o Lots of cleanup and bugfixes in orinoco_plx.c
- *      o Cleanup to handling of Tx rate setting.
- *      o Removed support for old encapsulation method.
- *      o Removed old "dldwd" names.
- *      o Split RID constants into a new file hermes_rid.h
- *      o Renamed RID constants to match linux-wlan-ng and prism2.o
- *      o Bugfixes in hermes.c
- *      o Poke the PLX's INTCSR register, so it actually starts
- *        generating interrupts.  These cards might actually work now.
- *      o Update to wireless extensions v12 (Jean II)
- *      o Support for tallies and inquire command (Jean II)
- *      o Airport updates for newer PPC kernels (BenH)
- *
- * v0.08b -> v0.09 - 21/12/2001 - David Gibson
- *      o Some new PCI IDs for PLX cards.
- *      o Removed broken attempt to do ALLMULTI reception.  Just use
- *        promiscuous mode instead
- *      o Preliminary work for list-AP (Jean II)
- *      o Airport updates from (BenH)
- *      o Eliminated racy hw_ready stuff
- *      o Fixed generation of fake events in irq handler.  This should
- *        finally kill the EIO problems (Jean II & dgibson)
- *      o Fixed breakage of bitrate set/get on Agere firmware (Jean II)
- *
- * v0.09 -> v0.09a - 2/1/2002 - David Gibson
- *      o Fixed stupid mistake in multicast list handling, triggering
- *        a BUG()
- *
- * v0.09a -> v0.09b - 16/1/2002 - David Gibson
- *      o Fixed even stupider mistake in new interrupt handling, which
- *        seriously broke things on big-endian machines.
- *      o Removed a bunch of redundant includes and exports.
- *      o Removed a redundant MOD_{INC,DEC}_USE_COUNT pair in airport.c
- *      o Don't attempt to do hardware level multicast reception on
- *        Intersil firmware, just go promisc instead.
- *      o Typo fixed in hermes_issue_cmd()
- *      o Eliminated WIRELESS_SPY #ifdefs
- *      o Status code reported on Tx exceptions
- *      o Moved netif_wake_queue() from ALLOC interrupts to TX and TXEXC
- *        interrupts, which should fix the timeouts we're seeing.
- *
- * v0.09b -> v0.10 - 25 Feb 2002 - David Gibson
- *      o Removed nested structures used for header parsing, so the
- *        driver should now work without hackery on ARM
- *      o Fix for WEP handling on Intersil (Hawk Newton)
- *      o Eliminated the /proc/hermes/ethXX/regs debugging file.  It
- *        was never very useful.
- *      o Make Rx errors less noisy.
- *
- * v0.10 -> v0.11 - 5 Apr 2002 - David Gibson
- *      o Laid the groundwork in hermes.[ch] for devices which map
- *        into PCI memory space rather than IO space.
- *      o Fixed bug in multicast handling (cleared multicast list when
- *        leaving promiscuous mode).
- *      o Relegated Tx error messages to debug.
- *      o Cleaned up / corrected handling of allocation lengths.
- *      o Set OWNSSID in IBSS mode for WinXP interoperability (jimc).
- *      o Change to using alloc_etherdev() for structure allocations. 
- *      o Check for and drop undersized packets.
- *      o Fixed a race in stopping/waking the queue.  This should fix
- *        the timeout problems (Pavel Roskin)
- *      o Reverted to netif_wake_queue() on the ALLOC event.
- *      o Fixes for recent Symbol firmwares which lack AP density
- *        (Pavel Roskin).
- *
- * v0.11 -> v0.11a - 29 Apr 2002 - David Gibson
- *      o Handle different register spacing, necessary for Prism 2.5
- *        PCI adaptors (Steve Hill).
- *      o Cleaned up initialization of card structures in orinoco_cs
- *        and airport.  Removed card->priv field.
- *      o Make response structure optional for hermes_docmd_wait()
- *        Pavel Roskin)
- *      o Added PCI id for Nortel emobility to orinoco_plx.c.
- *      o Cleanup to handling of Symbol's allocation bug. (Pavel Roskin)
- *      o Cleanups to firmware capability detection.
- *      o Arrange for orinoco_pci.c to override firmware detection.
- *        We should be able to support the PCI Intersil cards now.
- *      o Cleanup handling of reset_cor and hard_reset (Pavel Roskin).
- *      o Remove erroneous use of USER_BAP in the TxExc handler (Jouni
- *        Malinen).
- *      o Makefile changes for better integration into David Hinds
- *        pcmcia-cs package.
- *
- * v0.11a -> v0.11b - 1 May 2002 - David Gibson
- *      o Better error reporting in orinoco_plx_init_one()
- *      o Fixed multiple bad kfree() bugs introduced by the
- *        alloc_orinocodev() changes.
- *
- * v0.11b -> v0.12 - 19 Jun 2002 - David Gibson
- *      o Support changing the MAC address.
- *      o Correct display of Intersil firmware revision numbers.
- *      o Entirely revised locking scheme.  Should be both simpler and
- *         better.
- *      o Merged some common code in orinoco_plx, orinoco_pci and
- *        airport by creating orinoco_default_{open,stop,reset}()
- *        which are used as the dev->open, dev->stop, priv->reset
- *        callbacks if none are specified when alloc_orinocodev() is
- *        called.
- *      o Removed orinoco_plx_interrupt() and orinoco_pci_interrupt().
- *        They didn't do anything.
- *
- * v0.12 -> v0.12a - 4 Jul 2002 - David Gibson
- *      o Some rearrangement of code.
- *      o Numerous fixups to locking and rest handling, particularly
- *        for PCMCIA.
- *      o This allows open and stop net_device methods to be in
- *        orinoco.c now, rather than in the init modules.
- *      o In orinoco_cs.c link->priv now points to the struct
- *        net_device not to the struct orinoco_private.
- *      o Added a check for undersized SNAP frames, which could cause
- *        crashes.
- *
- * v0.12a -> v0.12b - 11 Jul 2002 - David Gibson
- *      o Fix hw->num_init testing code, so num_init is actually
- *        incremented.
- *      o Fix very stupid bug in orinoco_cs which broke compile with
- *        CONFIG_SMP.
- *      o Squashed a warning.
- *
- * v0.12b -> v0.12c - 26 Jul 2002 - David Gibson
- *      o Change to C9X style designated initializers.
- *      o Add support for 3Com AirConnect PCI.
- *      o No longer ignore the hard_reset argument to
- *        alloc_orinocodev().  Oops.
- *
- * v0.12c -> v0.13beta1 - 13 Sep 2002 - David Gibson
- *      o Revert the broken 0.12* locking scheme and go to a new yet
- *        simpler scheme.
- *      o Do firmware resets only in orinoco_init() and when waking
- *        the card from hard sleep.
- *
- * v0.13beta1 -> v0.13 - 27 Sep 2002 - David Gibson
- *      o Re-introduced full resets (via schedule_task()) on Tx
- *        timeout.
- *
- * v0.13 -> v0.13a - 30 Sep 2002 - David Gibson
- *      o Minor cleanups to info frame handling.  Add basic support
- *        for linkstatus info frames.
- *      o Include required kernel headers in orinoco.h, to avoid
- *        compile problems.
- *
- * v0.13a -> v0.13b - 10 Feb 2003 - David Gibson
- *      o Implemented hard reset for Airport cards
- *      o Experimental suspend/resume implementation for orinoco_pci
- *      o Abolished /proc debugging support, replaced with a debugging
- *        iwpriv.  Now it's ugly and simple instead of ugly and complex.
- *      o Bugfix in hermes.c if the firmware returned a record length
- *        of 0, we could go clobbering memory.
- *      o Bugfix in orinoco_stop() - it used to fail if hw_unavailable
- *        was set, which was usually true on PCMCIA hot removes.
- *      o Track LINKSTATUS messages, silently drop Tx packets before
- *        we are connected (avoids confusing the firmware), and only
- *        give LINKSTATUS printk()s if the status has changed.
- *
- * v0.13b -> v0.13c - 11 Mar 2003 - David Gibson
- *      o Cleanup: use dev instead of priv in various places.
- *      o Bug fix: Don't ReleaseConfiguration on RESET_PHYSICAL event
- *        if we're in the middle of a (driver initiated) hard reset.
- *      o Bug fix: ETH_ZLEN is supposed to include the header
- *        (Dionysus Blazakis & Manish Karir)
- *      o Convert to using workqueues instead of taskqueues (and
- *        backwards compatibility macros for pre 2.5.41 kernels).
- *      o Drop redundant (I think...) MOD_{INC,DEC}_USE_COUNT in
- *        airport.c
- *      o New orinoco_tmd.c init module from Joerg Dorchain for
- *        TMD7160 based PCI to PCMCIA bridges (similar to
- *        orinoco_plx.c).
- *
- * v0.13c -> v0.13d - 22 Apr 2003 - David Gibson
- *      o Make hw_unavailable a counter, rather than just a flag, this
- *        is necessary to avoid some races (such as a card being
- *        removed in the middle of orinoco_reset().
- *      o Restore Release/RequestConfiguration in the PCMCIA event handler
- *        when dealing with a driver initiated hard reset.  This is
- *        necessary to prevent hangs due to a spurious interrupt while
- *        the reset is in progress.
- *      o Clear the 802.11 header when transmitting, even though we
- *        don't use it.  This fixes a long standing bug on some
- *        firmwares, which seem to get confused if that isn't done.
- *      o Be less eager to de-encapsulate SNAP frames, only do so if
- *        the OUI is 00:00:00 or 00:00:f8, leave others alone.  The old
- *        behaviour broke CDP (Cisco Discovery Protocol).
- *      o Use dev instead of priv for free_irq() as well as
- *        request_irq() (oops).
- *      o Attempt to reset rather than giving up if we get too many
- *        IRQs.
- *      o Changed semantics of __orinoco_down() so it can be called
- *        safely with hw_unavailable set.  It also now clears the
- *        linkstatus (since we're going to have to reassociate).
- *
- * v0.13d -> v0.13e - 12 May 2003 - David Gibson
- *      o Support for post-2.5.68 return values from irq handler.
- *      o Fixed bug where underlength packets would be double counted
- *        in the rx_dropped statistics.
- *      o Provided a module parameter to suppress linkstatus messages.
- *
- * v0.13e -> v0.14alpha1 - 30 Sep 2003 - David Gibson
- *      o Replaced priv->connected logic with netif_carrier_on/off()
- *        calls.
- *      o Remove has_ibss_any and never set the CREATEIBSS RID when
- *        the ESSID is empty.  Too many firmwares break if we do.
- *      o 2.6 merges: Replace pdev->slot_name with pci_name(), remove
- *        __devinitdata from PCI ID tables, use free_netdev().
- *      o Enabled shared-key authentication for Agere firmware (from
- *        Robert J. Moore <Robert.J.Moore AT allanbank.com>
- *      o Move netif_wake_queue() (back) to the Tx completion from the
- *        ALLOC event.  This seems to prevent/mitigate the rolling
- *        error -110 problems at least on some Intersil firmwares.
- *        Theoretically reduces performance, but I can't measure it.
- *        Patch from Andrew Tridgell <tridge AT samba.org>
- *
- * v0.14alpha1 -> v0.14alpha2 - 20 Oct 2003 - David Gibson
- *      o Correctly turn off shared-key authentication when requested
- *        (bugfix from Robert J. Moore).
- *      o Correct airport sleep interfaces for current 2.6 kernels.
- *      o Add code for key change without disabling/enabling the MAC
- *        port.  This is supposed to allow 802.1x to work sanely, but
- *        doesn't seem to yet.
- *
  * TODO
- *      o New wireless extensions API (patch from Moustafa
- *        Youssef, updated by Jim Carter and Pavel Roskin).
  *      o Handle de-encapsulation within network layer, provide 802.11
  *        headers (patch from Thomas 'Dent' Mirlacher)
- *      o RF monitor mode support
  *      o Fix possible races in SPY handling.
  *      o Disconnect wireless extensions from fundamental configuration.
  *      o (maybe) Software WEP support (patch from Stano Meduna).
diff --git a/drivers/net/wireless/orinoco.h b/drivers/net/wireless/orinoco.h
index 0f4be5da46e7..2f213a7103fe 100644
--- a/drivers/net/wireless/orinoco.h
+++ b/drivers/net/wireless/orinoco.h
@@ -7,7 +7,7 @@
 #ifndef _ORINOCO_H
 #define _ORINOCO_H
 
-#define DRIVER_VERSION "0.14alpha2"
+#define DRIVER_VERSION "0.15rc2"
 
 #include <linux/types.h>
 #include <linux/spinlock.h>