wl1251: halt the embedded CPU before loading firmware

After initial power-up, the embedded cpu is usually halted.  However,
if we down the interface and only do a soft reset before bringing
the interface back up, it will still be running and the firmware
loading code will bail out.  This change halts the CPU before loading
the firmware, enabling a second call to wl1251_boot() to succeed
without a hard reset.

Signed-off-by: Bob Copeland <me@bobcopeland.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

1 files changed, 3 insertions, 0 deletions

diff --git a/drivers/net/wireless/wl12xx/wl1251_boot.c b/drivers/net/wireless/wl12xx/wl1251_boot.c
index 592c3b5cc8f8..452d748e42c6 100644
--- a/drivers/net/wireless/wl12xx/wl1251_boot.c
+++ b/drivers/net/wireless/wl12xx/wl1251_boot.c
@@ -465,6 +465,9 @@ int wl1251_boot(struct wl1251 *wl)
         int ret = 0, minor_minor_e2_ver;
         u32 tmp, boot_data;
 
+        /* halt embedded ARM CPU while loading firmware */
+        wl1251_reg_write32(wl, ACX_REG_ECPU_CONTROL, ECPU_CONTROL_HALT);
+
         ret = wl1251_boot_soft_reset(wl);
         if (ret < 0)
                 goto out;