rt2x00: Move all register definitions for rt2800 to rt2800.h.

There is no point on having them separated across 3 files.
At the same time rename USB_CYC_CFG to its proper name US_CYC_CNT
(as per the datasheet).

Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com>
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>

1 files changed, 48 insertions, 0 deletions

diff --git a/drivers/net/wireless/rt2x00/rt2800.h b/drivers/net/wireless/rt2x00/rt2800.h
index 35afe6376a4d..16bfaa8c4477 100644
--- a/drivers/net/wireless/rt2x00/rt2800.h
+++ b/drivers/net/wireless/rt2x00/rt2800.h
@@ -98,6 +98,21 @@
  */
 
 /*
+ * E2PROM_CSR: PCI EEPROM control register.
+ * RELOAD: Write 1 to reload eeprom content.
+ * TYPE: 0: 93c46, 1:93c66.
+ * LOAD_STATUS: 1:loading, 0:done.
+ */
+#define E2PROM_CSR                      0x0004
+#define E2PROM_CSR_DATA_CLOCK           FIELD32(0x00000001)
+#define E2PROM_CSR_CHIP_SELECT          FIELD32(0x00000002)
+#define E2PROM_CSR_DATA_IN              FIELD32(0x00000004)
+#define E2PROM_CSR_DATA_OUT             FIELD32(0x00000008)
+#define E2PROM_CSR_TYPE                 FIELD32(0x00000030)
+#define E2PROM_CSR_LOAD_STATUS          FIELD32(0x00000040)
+#define E2PROM_CSR_RELOAD               FIELD32(0x00000080)
+
+/*
  * OPT_14: Unknown register used by rt3xxx devices.
  */
 #define OPT_14_CSR                      0x0114
@@ -321,6 +336,39 @@
 #define RX_DRX_IDX                      0x029c
 
 /*
+ * USB_DMA_CFG
+ * RX_BULK_AGG_TIMEOUT: Rx Bulk Aggregation TimeOut in unit of 33ns.
+ * RX_BULK_AGG_LIMIT: Rx Bulk Aggregation Limit in unit of 256 bytes.
+ * PHY_CLEAR: phy watch dog enable.
+ * TX_CLEAR: Clear USB DMA TX path.
+ * TXOP_HALT: Halt TXOP count down when TX buffer is full.
+ * RX_BULK_AGG_EN: Enable Rx Bulk Aggregation.
+ * RX_BULK_EN: Enable USB DMA Rx.
+ * TX_BULK_EN: Enable USB DMA Tx.
+ * EP_OUT_VALID: OUT endpoint data valid.
+ * RX_BUSY: USB DMA RX FSM busy.
+ * TX_BUSY: USB DMA TX FSM busy.
+ */
+#define USB_DMA_CFG                     0x02a0
+#define USB_DMA_CFG_RX_BULK_AGG_TIMEOUT FIELD32(0x000000ff)
+#define USB_DMA_CFG_RX_BULK_AGG_LIMIT   FIELD32(0x0000ff00)
+#define USB_DMA_CFG_PHY_CLEAR           FIELD32(0x00010000)
+#define USB_DMA_CFG_TX_CLEAR            FIELD32(0x00080000)
+#define USB_DMA_CFG_TXOP_HALT           FIELD32(0x00100000)
+#define USB_DMA_CFG_RX_BULK_AGG_EN      FIELD32(0x00200000)
+#define USB_DMA_CFG_RX_BULK_EN          FIELD32(0x00400000)
+#define USB_DMA_CFG_TX_BULK_EN          FIELD32(0x00800000)
+#define USB_DMA_CFG_EP_OUT_VALID        FIELD32(0x3f000000)
+#define USB_DMA_CFG_RX_BUSY             FIELD32(0x40000000)
+#define USB_DMA_CFG_TX_BUSY             FIELD32(0x80000000)
+
+/*
+ * US_CYC_CNT
+ */
+#define US_CYC_CNT                      0x02a4
+#define US_CYC_CNT_CLOCK_CYCLE          FIELD32(0x000000ff)
+
+/*
  * PBF_SYS_CTRL
  * HOST_RAM_WRITE: enable Host program ram write selection
  */